Merge branch 'master' of git+ssh://repo.or.cz/srv/git/org-mode

Makefile

@@ -45,6 +45,7 @@ MAKEINFO = makeinfo
 
 # How to create the HTML file
 TEXI2HTML = makeinfo --html --number-sections
+TEXI2HTMLNOPSLIT = makeinfo --html --no-split --number-sections
 
 # How to copy the lisp files and elc files to their distination.
 CP = cp -p
@@ -116,7 +117,8 @@ LISPFILES0 = $(LISPF:%=lisp/%)
 LISPFILES  = $(LISPFILES0) lisp/org-install.el
 ELCFILES0  = $(LISPFILES0:.el=.elc)
 ELCFILES   = $(LISPFILES:.el=.elc)
-DOCFILES   = doc/org.texi doc/org.pdf doc/org doc/dir doc/.nosearch
+DOCFILES   = doc/org.texi doc/org.pdf doc/org doc/dir doc/.nosearch \
+             doc/orgguide.texi doc/orgguide.pdf
 CARDFILES  = doc/orgcard.tex doc/orgcard.pdf doc/orgcard_letter.pdf
 TEXIFILES  = doc/org.texi
 INFOFILES  = doc/org
@@ -145,11 +147,14 @@ compile: $(ELCFILES0)
 
 install: install-lisp
 
-doc: doc/org.html doc/org.pdf doc/orgcard.pdf doc/orgcard_letter.pdf
+doc: doc/org.html doc/org.pdf doc/orgcard.pdf doc/orgcard_letter.pdf doc/orgguide.pdf
 
 p:
 	${MAKE} pdf && open doc/org.pdf
 
+g:
+	${MAKE} pdf && open doc/orgguide.pdf
+
 install-lisp: $(LISPFILES) $(ELCFILES)
 	if [ ! -d $(lispdir) ]; then $(MKDIR) $(lispdir); else true; fi ;
 	$(CP) $(LISPFILES) $(lispdir)
@@ -186,6 +191,9 @@ doc/org: doc/org.texi
 doc/org.pdf: doc/org.texi
 	(cd doc; $(TEXI2PDF) org.texi)
 
+doc/orgguide.pdf: doc/orgguide.texi
+	(cd doc; $(TEXI2PDF) orgguide.texi)
+
 doc/org.html: doc/org.texi
 	(cd doc; $(TEXI2HTML) --no-split -o org.html org.texi)
 	UTILITIES/manfull.pl doc/org.html
@@ -213,9 +221,15 @@ html_manual: doc/org.texi
 	$(TEXI2HTML) -o doc/manual doc/org.texi
 	UTILITIES/mansplit.pl doc/manual/*.html
 
+html_guide: doc/orgguide.texi
+	rm -rf doc/guide
+	mkdir doc/guide
+	$(TEXI2HTML) -o doc/guide doc/orgguide.texi
+	UTILITIES/guidesplit.pl doc/guide/*.html
+
 info:	doc/org
 
-pdf:	doc/org.pdf
+pdf:	doc/org.pdf doc/orgguide.pdf
 
 card:	doc/orgcard.pdf doc/orgcard_letter.pdf
 
@@ -246,10 +260,12 @@ release:
 	${MAKE} doc
 	UTILITIES/gplmanual.pl
 	${MAKE} html_manual
+	${MAKE} html_guide
 	rm -rf RELEASEDIR
 	$(MKDIR) RELEASEDIR
 	cp org-$(TAG).zip org-$(TAG).tar.gz RELEASEDIR
 	cp doc/org.pdf doc/orgcard.pdf doc/org.texi doc/org.html RELEASEDIR
+	cp doc/orgguide.pdf RELEASEDIR
 	cp RELEASEDIR/org-$(TAG).zip    RELEASEDIR/org.zip
 	cp RELEASEDIR/org-$(TAG).tar.gz RELEASEDIR/org.tar.gz
 
@@ -258,6 +274,7 @@ upload_release:
 
 upload_manual:
 	rsync -avuz --delete doc/manual/ cdominik@orgmode.org:orgmode.org/manual/
+	rsync -avuz --delete doc/guide/ cdominik@orgmode.org:orgmode.org/guide/
 
 relup0:
 	${MAKE} release

ORGWEBPAGE/index.org

@@ -168,11 +168,13 @@ and corresponding to the latest git version.
 
 * Documentation
 ** The Org manual
-   - Read the [[file:manual/index.html][documentation online]].
+   - Read the [[file:manual/index.html][manual online]].
    - You can also have the entire manual in a [[file:org.html][single monolithic file]].
-   - Download the documentation as a  [[file:org.pdf][PDF document]].
+   - Download the manual as a  [[file:org.pdf][PDF document]].
    - A [[http://hpcgi1.nifty.com/spen/index.cgi?OrgMode%2fManual][Japanese translation]] of the manual (version 4.60), by Takeshi
      Okano.
+   - The Org-mode Guide is a compact version of the manual, with all
+     basic information. Read the [[file:guide/index.html][guide online]] or as a [[file:orgguide.pdf][PDF document]]
 
 ** Reference card
    - Download the [[file:orgcard.pdf][Refcard]] for org-mode

UTILITIES/guidesplit.pl

@@ -0,0 +1,62 @@
+#!/usr/bin/perl
+# Work on the files that are created by makeinfo for html output
+# split into many small files.
+
+# This will walk though the files listed on the command line, install
+# Sebastian Rose's key reader and add a small top-level-only table
+# of contents that will be placed into a special region and visible
+# in all subfiles.  The small contents is a constant and has to be updated
+# by hand, currently.
+
+$contents = <<EOF;
+<div id="table-of-contents">
+<h2>Table of Contents</h2>
+<div id="text-table-of-contents">
+<ul>
+<li><a name="toc_Top" href="index.html#Top">Org Mode Compact Guide</a>
+<li><a name="toc_Introduction" href="Introduction.html#Introduction">1 Introduction</a>
+<li><a name="toc_Document-Structure" href="Document-Structure.html#Document-Structure">2 Document Structure</a>
+<li><a name="toc_Tables" href="Tables.html#Tables">3 Tables</a>
+<li><a name="toc_Hyperlinks" href="Hyperlinks.html#Hyperlinks">4 Hyperlinks</a>
+<li><a name="toc_TODO-Items" href="TODO-Items.html#TODO-Items">5 TODO Items</a>
+<li><a name="toc_Tags" href="Tags.html#Tags">6 Tags</a>
+<li><a name="toc_Properties" href="Properties.html#Properties">7 Properties</a>
+<li><a name="toc_Dates-and-Times" href="Dates-and-Times.html#Dates-and-Times">8 Dates and Times</a>
+<li><a name="toc_Capture" href="Capture-_002d-Refile-_002d-Archive.html#Capture-_002d-Refile-_002d-Archive">9 Capture-Refile-Archive</a>
+<li><a name="toc_Agenda-Views" href="Agenda-Views.html#Agenda-Views">10 Agenda Views</a>
+<li><a name="toc_Markup" href="Markup.html#Markup">11 Markup</a>
+<li><a name="toc_Exporting" href="Exporting.html#Exporting">12 Exporting</a>
+<li><a name="toc_Publishing" href="Publishing.html#Publishing">13 Publishing</a>
+<li><a name="toc_Miscellaneous" href="Miscellaneous.html#Miscellaneous">14 Miscellaneous</a>
+</li></ul>
+</div>
+</div>
+</div>
+EOF
+
+$script = <<'EOF';
+</style><link rel="stylesheet" href="http://orgmode.org/org.css" type="text/css" />
+<script type="text/javascript" src="http://orgmode.org/org-keys.js"></script>
+<script type="text/javascript">
+  <!--/*--><![CDATA[/*><!--*/
+   OrgKeyReader.registerHref('h', 'index.html');
+   OrgKeyReader.registerHref('t', 'index.html');
+  /*]]>*/-->
+</script>
+EOF
+
+while ($page = shift) {
+system "mv $page $page.orig";
+open IN,"<$page.orig" or die "Cannot read from $page.orig\n";
+undef $/;
+$all = <IN>;
+close IN;
+
+$all =~ s/<meta http-equiv="Content-Style-Type" content="text\/css">/$&\n$script/;
+$all =~ s/^<body>/<body onload="OrgKeyReader.init();">\n$contents/m;
+
+open OUT,">$page" or die "Cannot write to $page\n";
+print OUT $all;
+close OUT;
+system "rm $page.orig";
+}

contrib/babel/lisp/langs/org-babel-matlab.el

@@ -50,6 +50,19 @@
 
 (defun org-babel-expand-body:matlab (body params &optional processed-params) body)
 
+(defvar org-babel-matlab-with-emacs-link nil
+  "If non-nil use matlab-shell-run-region for session
+  evaluation. This will use EmacsLink if (matlab-with-emacs-link)
+  evaluates to a non-nil value.")
+
+(defvar org-babel-matlab-emacs-link-wrapper-method
+   "%s
+if ischar(ans), fid = fopen('%s', 'w'); fprintf(fid, '%%s\\n', ans); fclose(fid);
+else, save -ascii %s ans
+end
+delete('%s')
+")
+
 (defun org-babel-execute:matlab (body params)
   "Execute a block of matlab code with org-babel."
   (org-babel-execute:octave body params 'matlab))

contrib/babel/lisp/langs/org-babel-octave.el

@@ -41,7 +41,7 @@
 (defvar org-babel-octave-shell-command "octave -q"
   "Shell command to use to run octave as an external process.")
 
-(defun org-babel-expand-body:octave (org-babel-process-params params)
+(defun org-babel-expand-body:octave (body params &optional processed-params)
   (let ((vars (second (or processed-params (org-babel-process-params params)))))
     (concat
      ;; prepend code to define all arguments passed to the code block
@@ -104,19 +104,15 @@ then create. Return the initialized session."
     (let ((session (or session (if matlabp "*Inferior Matlab*" "*Inferior Octave*"))))
       (if (org-babel-comint-buffer-livep session) session
 	(save-window-excursion
-	  (if matlabp (matlab-shell) (run-octave))
+	  (if matlabp (unless org-babel-matlab-with-emacs-link (matlab-shell))
+	    (run-octave))
 	  (rename-buffer (if (bufferp session) (buffer-name session)
 			   (if (stringp session) session (buffer-name)))) (current-buffer))))))
 
 (defvar org-babel-octave-wrapper-method
    "%s
-if ischar(ans)
+if ischar(ans), fid = fopen('%s', 'w'); fprintf(fid, '%%s\\n', ans); fclose(fid);
-   fid = fopen('%s', 'w')
+else, save -ascii %s ans
-   fprintf(fid, ans)
-   fprintf(fid, '\\n')
-   fclose(fid)
-else
-   save -ascii %s ans
 end")
 
 (defvar org-babel-octave-eoe-indicator "\'org_babel_eoe\'")
@@ -154,6 +150,7 @@ value of the last statement in BODY, as elisp."
 
 (defun org-babel-octave-evaluate-session (session body result-type &optional matlabp)
   (let* ((tmp-file (make-temp-file "org-babel-results-"))
+	 (wait-file (make-temp-file "org-babel-matlab-emacs-link-wait-signal-"))
 	 (full-body
 	  (case result-type
 	    (output
@@ -161,12 +158,29 @@ value of the last statement in BODY, as elisp."
 	      #'org-babel-chomp
 	      (list body org-babel-octave-eoe-indicator) "\n"))
 	    (value
+	     (if (and matlabp org-babel-matlab-with-emacs-link)
+		 (concat
+		  (format org-babel-matlab-emacs-link-wrapper-method
+			  body tmp-file tmp-file wait-file) "\n")
 	       (mapconcat
 		#'org-babel-chomp
-	      (list (format org-babel-octave-wrapper-method body tmp-file tmp-file) org-babel-octave-eoe-indicator) "\n"))))
+		(list (format org-babel-octave-wrapper-method body tmp-file tmp-file)
-	 (raw (org-babel-comint-with-output session
+		      org-babel-octave-eoe-indicator) "\n")))))
+	 (raw (if (and matlabp org-babel-matlab-with-emacs-link)
+		  (save-window-excursion
+		    (with-temp-buffer
+		      (insert full-body)
+		      (write-region "" 'ignored wait-file nil nil nil 'excl)
+		      (matlab-shell-run-region (point-min) (point-max))
+		      (message "Waiting for Matlab Emacs Link")
+		      (while (file-exists-p wait-file) (sit-for 0.01))
+		      "")) ;; matlab-shell-run-region doesn't seem to
+			   ;; make *matlab* buffer contents easily
+			   ;; available, so :results output currently
+			   ;; won't work
+		(org-babel-comint-with-output session
 		    (if matlabp org-babel-octave-eoe-indicator org-babel-octave-eoe-output) t
-		(insert full-body) (comint-send-input nil t))) results)
+		  (insert full-body) (comint-send-input nil t)))) results)
     (case result-type
       (value
        (org-babel-octave-import-elisp-from-file (org-babel-maybe-remote-file tmp-file)))

contrib/babel/lisp/langs/org-babel-screen.el

@@ -62,7 +62,7 @@ In case you want to use a different screen than one selected by your $PATH")
            (socket (org-babel-screen-session-socketname session)))
       (unless socket (org-babel-prep-session:screen session params))
       (org-babel-screen-session-execute-string
-       session (org-babel-expand-body:screen body)))))
+       session (org-babel-expand-body:screen body params)))))
 
 (defun org-babel-prep-session:screen (session params)
   "Prepare SESSION according to the header arguments specified in PARAMS."

doc/org.texi

@@ -495,7 +495,7 @@ example as:
 @r{@bullet{} a TODO list editor}
 @r{@bullet{} a full agenda and planner with deadlines and work scheduling}
 @pindex GTD, Getting Things Done
-@r{@bullet{} an environment to implement David Allen's GTD system}
+@r{@bullet{} an environment in which to implement David Allen's GTD system}
 @r{@bullet{} a basic database application}
 @r{@bullet{} a simple hypertext system, with HTML and La@TeX{} export}
 @r{@bullet{} a publishing tool to create a set of interlinked webpages}
@@ -8456,8 +8456,8 @@ Some backends (HTML, La@TeX{}, and DocBook) allow you to directly include
 images into the exported document.  Org does this, if a link to an image
 files does not have a description part, for example @code{[[./img/a.jpg]]}.
 If you wish to define a caption for the image and maybe a label for internal
-cross references, you sure that the link is on a line by itself precede it
+cross references, make sure that the link is on a line by itself and precede
-with:
+it with @code{#+CAPTION} and @code{#+LABEL} as follows:
 
 @example
 #+CAPTION: This is the caption for the next figure link (or table)
@@ -8559,7 +8559,7 @@ Edit the source code example at point in its native mode.  This works by
 switching to a temporary buffer with the source code.  You need to exit by
 pressing @kbd{C-c '} again@footnote{Upon exit, lines starting with @samp{*}
 or @samp{#} will get a comma prepended, to keep them from being interpreted
-by Org as outline nodes or special comments.  These commas will be striped
+by Org as outline nodes or special comments.  These commas will be stripped
 for editing with @kbd{C-c '}, and also for export.}, the edited version will
 then replace the old version in the Org buffer.  Fixed-width regions
 (where each line starts with a colon followed by a space) will be edited
@@ -8698,7 +8698,7 @@ delimiters, for example:
 Angles are written as Greek letters \alpha, \beta and \gamma.
 @end example
 
-@vindex org-html-entities
+@vindex org-entities
 During export, these symbols will be transformed into the native format of
 the exporter backend.  Strings like @code{\alpha} will be exported as
 @code{α} in the HTML output, and as @code{$\alpha$} in the La@TeX{}
@@ -8707,7 +8707,7 @@ output.  Similarly, @code{\nbsp} will become @code{ } in HTML and
 like this: @samp{\Aacute@{@}stor}.
 
 A large number of entities is provided, with names taken from both HTML and
-La@TeX{}, see the variable @code{org-html-entities} for the complete list.
+La@TeX{}, see the variable @code{org-entities} for the complete list.
 @samp{\-} is treated as a shy hyphen, and @samp{--}, @samp{---}, and
 @samp{...} are all converted into special commands creating hyphens of
 different lengths or a compact set of dots.
@@ -9718,14 +9718,14 @@ If you need references to a label created in this way, write
 @node Beamer class export,  , Images in LaTeX export, LaTeX and PDF export
 @subsection Beamer class export
 
-The LaTeX class @file{beamer} allows to produce high quality presentations
+The LaTeX class @file{beamer} allows production of high quality presentations
 using LaTeX and pdf processing.  Org-mode has special support for turning an
 Org-mode file or tree into a @file{beamer} presentation.
 
 When the LaTeX class for the current buffer (as set with @code{#+LaTeX_CLASS:
 beamer}) or subtree (set with a @code{LaTeX_CLASS} property) is
 @code{beamer}, a special export mode will turn the file or tree into a beamer
-presentation.  Any tree with not-to-deep level nesting should in principle be
+presentation.  Any tree with not-too-deep level nesting should in principle be
 exportable as a beamer presentation.  By default, the top-level entries (or
 the first level below the selected subtree heading) will be turned into
 frames, and the outline structure below this level will become itemize lists.
@@ -9757,7 +9757,7 @@ set an options argument for the implied @code{columns} environment.
 @item BEAMER_col
 The width of a column that should start with this entry.  If this property is
 set, the entry will also get a @code{:BMCOL:} property to make this visible.
-Also this tag is only a visual aid.  When his is a plain number, it will be
+Also this tag is only a visual aid.  When this is a plain number, it will be
 interpreted as a fraction of @code{\textwidth}.  Otherwise it will be assumed
 that you have specified the units, like @samp{3cm}.  The first such property
 in a frame will start a @code{columns} environment to surround the columns.
@@ -9801,7 +9801,7 @@ environment or the @code{BEAMER_col} property.
 Column view provides a great way to set the environment of a node and other
 important parameters.  Make sure you are using a COLUMN format that is geared
 toward this special purpose.  The command @kbd{M-x
-org-beamer-settings-template} does define such a format.
+org-beamer-settings-template} defines such a format.
 
 Here is a simple example Org document that is intended for beamer export.
 
@@ -10011,12 +10011,12 @@ more types to this list as long as DocBook supports them.
 @cindex Special characters in DocBook export
 
 @vindex org-export-docbook-doctype
-@vindex org-html-entities
+@vindex org-entities
 Special characters that are written in @TeX{}-like syntax, such as @code{\alpha},
 @code{\Gamma}, and @code{\Zeta}, are supported by DocBook exporter.  These
 characters are rewritten to XML entities, like @code{α},
 @code{Γ}, and @code{Ζ}, based on the list saved in variable
-@code{org-html-entities}.  As long as the generated DocBook file includes the
+@code{org-entities}.  As long as the generated DocBook file includes the
 corresponding entities, these special characters are recognized.
 
 You can customize variable @code{org-export-docbook-doctype} to include the

lisp/ChangeLog

@@ -1,3 +1,8 @@
+2010-05-02  Dan Davison  <davison@stats.ox.ac.uk>
+
+	* org-src.el (org-edit-src-code): allow-write-back-p had
+	erroneously been omitted from let binding
+
 2010-04-30  Carsten Dominik  <carsten.dominik@gmail.com>
 
 	* org-agenda.el (org-sorting-choice): New sorting type alpha.

lisp/org-clock.el

@@ -500,7 +500,8 @@ the mode line."
        ;; A string.  See if it is a delta
        (setq sign (string-to-char value))
        (if (member sign '(?- ?+))
-	   (setq current (org-hh:mm-string-to-minutes (substring current 1)))
+	   (setq current (org-hh:mm-string-to-minutes current)
+		 value (substring value 1))
 	 (setq current 0))
        (setq value (org-hh:mm-string-to-minutes value))
        (if (equal ?- sign)

lisp/org-entities.el

@@ -46,11 +46,11 @@ in backends where the corresponding character is not available."
   :type 'boolean)
 
 (defcustom org-entities-user nil
-  "User-defined entities used in Org-mode to preduce special characters.
+  "User-defined entities used in Org-mode to produce special characters.
-Each entry in this list is a list of strings.  It associate the name
+Each entry in this list is a list of strings.  It associates the name
 of the entity that can be inserted into an Org file as \\name with the
 appropriate replacements for the different export backends.  The order
-of the fields is he following
+of the fields is the following
 
 name                 As a string, without the leading backslash
 LaTeX replacement    In ready LaTeX, no further processing will take place
@@ -59,10 +59,10 @@ LaTeX mathp          A Boolean, either t or nil.  t if this entity needs
 HTML replacement     In ready HTML, no further processing will take place.
                      Usually this will be an &...; entity.
 ASCII replacement    Plain ASCII, no extensions.  Symbols that cannot be
-                     represented will be written out as an explanatory text.
+                     represented will be left as they are, but see the.
-                     But see the variable `org-entities-ascii-keep-macro-form'.
+                     variable `org-entities-ascii-explanatory'.
 Latin1 replacement   Use the special characters available in latin1.
-utf-8 replacement    Use special character available in utf-8.
+utf-8 replacement    Use the special characters available in utf-8.
 
 If you define new entities here that require specific LaTeX packages to be
 loaded, add these packages to `org-export-latex-packages-alist'."

lisp/org-faces.el

@@ -458,7 +458,7 @@ changes."
        (:foreground "green"))
       (((class color) (min-colors 8) (background dark))
        (:foreground "yellow"))))
-  "Face for fixed-with text like code snippets."
+  "Face for fixed-width text like code snippets."
   :group 'org-faces
   :version "22.1")
 
@@ -600,7 +600,7 @@ belong to the weekend."
 (defface org-agenda-dimmed-todo-face
   '((((background light)) (:foreground "grey50"))
     (((background dark)) (:foreground "grey50")))
-  "Face used to dimm blocked tasks in the agenda."
+  "Face used to dim blocked tasks in the agenda."
   :group 'org-faces)
 
 (defface org-scheduled-previously

lisp/org-src.el

@@ -63,7 +63,7 @@ there are kept outside the narrowed region."
   "The default coderef format.
 This format string will be used to search for coderef labels in literal
 examples (EXAMPLE and SRC blocks).  The format can be overwritten in
-an individual literal example with the -f option, like
+an individual literal example with the -l option, like
 
 #+BEGIN_SRC pascal +n -r -l \"((%s))\"
 ...
@@ -205,12 +205,12 @@ the edited version. Optional argument CONTEXT is used by
 	(beg (make-marker))
 	(end (make-marker))
 	(preserve-indentation org-src-preserve-indentation)
+	(allow-write-back-p (null code))
 	block-nindent total-nindent ovl lang lang-f single lfmt begline buffer msg)
     (if (not info)
 	nil
       (setq beg (move-marker beg (nth 0 info))
 	    end (move-marker end (nth 1 info))
-	    allow-write-back-p (null code)
 	    msg (if allow-write-back-p
 		    (substitute-command-keys
 		     "Edit, then exit with C-c ' (C-c and single quote)")

lisp/org.el

@@ -3029,7 +3029,7 @@ compiling LaTeX snippets into images for inclusion into HTML."
 	   (string :tag "A line of LaTeX"))))
 
 (defcustom org-export-latex-packages-alist nil
-  "Alist of packages to be inserted in every LaTeX the header.
+  "Alist of packages to be inserted in every LaTeX header.
 These will be inserted after `org-export-latex-default-packages-alist'.
 Each cell is of the format \( \"options\" \"package\" snippet-flag \).
 SNIPPET-FLAG, when t, indicates that this package is also needed when
@@ -4773,7 +4773,7 @@ will be prompted for."
 				 '(font-lock-fontified t face org-block))
 	    t)
 	   ((and (match-end 4) (equal dc3 "begin"))
-	    ;; Truely a block
+	    ;; Truly a block
 	    (setq block-type (downcase (match-string 5))
 		  quoting (member block-type org-protecting-blocks))
 	    (when (re-search-forward
@@ -7174,7 +7174,7 @@ Sorting can be alphabetically, numerically, by date/time as given by
 a time stamp, by a property or by priority.
 
 The command prompts for the sorting type unless it has been given to the
-function through the SORTING-TYPE argument, which needs to a character,
+function through the SORTING-TYPE argument, which needs to be a character,
 \(?n ?N ?a ?A ?t ?T ?s ?S ?d ?D ?p ?P ?r ?R ?f ?F).  Here is the
 precise meaning of each character:
 
@@ -7471,11 +7471,11 @@ If WITH-CASE is non-nil, the sorting will be case-sensitive."
 
 ;;;###autoload
 (define-minor-mode orgstruct-mode
-  "Toggle the minor more `orgstruct-mode'.
+  "Toggle the minor mode `orgstruct-mode'.
-This mode is for using Org-mode structure commands in other modes.
+This mode is for using Org-mode structure commands in other
-The following key behave as if Org-mode was active, if the cursor
+modes.  The following keys behave as if Org-mode were active, if
-is on a headline, or on a plain list item (both in the definition
+the cursor is on a headline, or on a plain list item (both as
-of Org-mode).
+defined by Org-mode).
 
 M-up        Move entry/item up
 M-down	    Move entry/item down
@@ -15917,8 +15917,9 @@ See `org-ctrl-c-ctrl-c-hook' for more information.
 This hook runs as the first action when TAB is pressed, even before
 `org-cycle' messes around with the `outline-regexp' to cater for
 inline tasks and plain list item folding.
-If any function in this hook returns t, not other actions like table
+If any function in this hook returns t, any other actions that
-field motion visibility cycling will be done.")
+would have been caused by TAB (such as table field motion or visibility
+cycling) will not occur.")
 
 (defvar org-tab-after-check-for-table-hook nil
   "Hook for functions to attach themselves to TAB.