* org-clock.el (org-clock-clocktable-language-setup): New
custom variable.
(org-clocktable-defaults): Set the default language.
(org-clocktable-write-default): Use the new variable.
I just found a left over in org-list.el. :)
Updated patch attached.
>From bf6c65a42e04d4753c58795442a479685bb5f318 Mon Sep 17 00:00:00 2001
From: Julien Danjou <julien@danjou.info>
Date: Wed, 26 Jan 2011 11:14:11 +0100
Subject: [PATCH] org: remove org-invisible-p
* org.el: Remove org-invisible-p: outline-invisible-p is
available in Emacs 22 and in recent XEmacs 21. Replace in
various files.
Signed-off-by: Julien Danjou <julien@danjou.info>
* lisp/org-clock.el (org-clock-before-select-task-hook): New hook.
(org-clock-select-task): Run new hook.
Hi Org-moders,
I am often frustrated because I clock a lot of things and some of them
are repeated (i.e, coffee, read mails, etc.). So when I want to clock
time I spend drinking coffee, the best I found was to search for a
headline matching "Coffee". Or to tag frequent clocks and do some
agenda research on this tag. Too long. :-)
So here is a solution for this need : to add a shortcut property to
entries I would like to "bookmark" and insert matching entries in the
org-clock-select-task menu. This can be done with :
* TODO Pause and drink coffee
:PROPERTIES:
:SHORTCUT: p
:END:
then C-u C-c C-x C-i p. And voil, "Pause and drink coffee" is clocked!
Here is a patch that adds a hook into org-clock-select-task and a module
that adds the shortcut feature. I tried to be the least intrusive
possible, if this proves to be useful, the hook trick might not be
needed.
Benj
TINYCHANGE
* lisp/org.el (org-get-category): New optional argument FORCE-REFRESH.
Automatically refresh if the property is not there.
(org-entry-properties): Remove refresh - this is now done in
org-get-category.
* lisp/org-clock.el (org-clock-insert-selection-line): Let `org-get-category'
do the property refresh.
* lisp/org-archive.el (org-archive-subtree): Force a refresh of
category properties.
Based on a patch by Julien Danjou.
* org-icalendar.el (org-print-icalendar-entries): Do not manually
refresh categories.
* org-clock.el (org-clock-insert-selection-line): Do not manually
refresh categories.
* org.el (org-get-category): Refresh categories if no category found.
(org-entry-properties): Do not manually refresh categories.
(org-prepare-agenda-buffers): Do not manually refresh categories.
It seems a very bad thing to call manually for a category refresh. It
seems better to try to refresh if we do not have a category.
Signed-off-by: Julien Danjou <julien@danjou.info>
* lisp/org-clock.el (org-day-of-week): New function.
(org-quarter-to-date): New function.
(org-clock-special-range): Implement quarters.
Patch by Erwin Vrolijk
* lisp/org-clock.el (org-get-clocktable)
previous patch incorrectly required whitespace in front of #+BEGIN: and #+END:
TINYCHANGE - This patch is in the public domain.
* lisp/org-clock.el (org-get-clocktable):
(org-in-clocktable-p):
(org-clocktable-shift):
(org-clocktable-steps): Fix regexp to allow for indented clock tables
#+BEGIN: and #+END: were expected only at the first column in some
places.
#BEGIN: and #END: were erroneously recognized inside normal lines in
other instances.
always allow whitespace after #BEGIN: and #END:, not just a single space
TINYCHANGE - This patch is in the public domain.
* org-clock.el (org-dblock-write:clocktable): fix double
reference to `link' in let construct.
(org-clock-clocktable-formatter): Fix typo in docstring.
(org-clocktable-write-default): Fix typo in docstring.
* lisp/org-clock.el (org-clocktable-write-default): Better handling of
narrowing.
Liang Wang writes:
> After I upgrade orgmode to latest version, clock report shows link
> text literally.
>
> For example,
>
> [[file:/home/liang/gtd/todo.org::Task...
>
> Unfortunately, in this way, I can not see what this task actually is.
> I have to temporarily disable link in clock report.
* lisp/org.el (org-shorten-string): New function.
* lisp/org-exp.el (org-export-convert-protected-spaces): New function.
(org-export-preprocess-string): Call
`org-export-convert-protected-spaces' to handle new hard spaces.
* lisp/org-clock.el (org-clocktable): New customization group.
(org-clocktable-defaults): New option.
(org-clock-clocktable-formatter): New option.
(org-clock-clocktable-default-properties): New option.
(org-dblock-write:clocktable): Rewrite to split out functionality
into separate functions.
(org-clocktable-write-default):
(org-clocktable-indent-string):
(org-clock-get-table-data): New functions.
* lisp/org-agenda.el (org-agenda-list):
(org-agenda-redo):
(org-agenda-clockreport-mode):
(org-agenda-set-mode-name): Rewrite to implement filtered clock tables.
* doc/org.texi (Clocking commands):
(The clock table): New sections.
(Agenda commands): Document filtered clock reports.
* lisp/org-clock.el (org-dblock-write:clocktable): Fix bug
when computing clock tables.
Ouch, bad bug. Resetting the clock file time was always
happening in the same file, not in the different files
visited by the summer.
* lisp/org-clock.el (org-dblock-write:clocktable): Pass file minutes
up to caller even if no table is generated.
Rainer Stengele writes:
> 1. Without maxlevbel I get I get
>
> #+BEGIN: clocktable :scope ("file1.org" "file2") :timestamp t :tstart "<2010-05-01 Sa 00:00>" :tend "<2010-07-31 Sa 23:55>"
> Clock summary at [2010-07-22 Do 09:07]
>
> | File | L | Timestamp | Headline | Time | | |
> |-------------------+---+---------------------+----------------+----------+--------+--------|
> | | | Timestamp | *Total time* | *327:51* | | |
> ...
>
>
>
> with :maxlevel 0 I get
>
>
> #+BEGIN: clocktable :maxlevel 0 :scope ("file1.org" "file2") :timestamp t :tstart "<2010-05-01 Sa 00:00>" :tend "<2010-07-31 Sa 23:55>"
> Clock summary at [2010-07-22 Do 09:11]
>
> | File | L | Timestamp | Headline | Time |
> |------+---+-----------+--------------+----------|
> | | | Timestamp | *Total time* | *232:17* |
> |------+---+-----------+--------------+----------|
> #+END:
>
>
> I would like to get the same results!
> Is ":maxlevel 0" intended to not include the sublevel clocks?
This is a fixup patch to commit
17c71a40c6. The org-clock-clocking-in
variable needs to be set when we are clocking out - in case the clock
out hook clocks-in again. This fixes a bug that creates dangling
clock entries.
This reverts commit 4a4fbf1b8c.
Clocking in the currently clocking task was leaving open clock entries
which is incorrect. Updating the modeline is less important than
keeping correct clocking data.
notifications.el is a new package from Julien Danjou, available
in Emacs 24.1. From etc/NEWS:
,----
| ** notifications.el provides an implementation of the Desktop
| Notifications API. It requires D-Bus for communication.
`----
I just tried adding :step day to
org-agenda-clockreport-parameter-plist, but then hitting R in the
agenda caused a crash, since org-clocktable-steps expects ts and te to
be strings, though in fact they are Gregorian day numbers.
This patch fixes the problem for me. It's quite ugly, so I don't
expect it to be committed in its current form :) but I hope it serves
as inspiration for someone to figure out the right way to solve this.
* lisp/org-clock.el (org-clocktable-steps): Allow ts and te to be
day numbers.
TINYCHANGE
* org-agenda.el (org-agenda-clock-goto): Use `\C-c\C-x\C-j' for
`org-clock-goto' and `J' for `org-agenda-clock-goto'. If the heading
currently clocked in is not listed in the agenda, display this entry
in another buffer. If there is no running clock, display a help
message.
* org-clock.el (org-clock-set-current): append the filename after the
heading.
This patch makes some straightforward corrections to a number of
docstrings. Each change is normally to:
- correct a typo, or
- fix up hyperlinks to function or variable names, or
- ensure slightly better conformance with the documentation guidelines
and tips given in the Elisp manual
No attempt is made to provide missing docstrings or document arguments.
Cheers,
Phil
* org-clock.el (org-dblock-write:clocktable): Return total time.
(org-clocktable-steps): Skip step when time is zero and the
:stepskip0 property is set.
Rainer Stengele writes:
> Creating clocktables for each day of a month is an excellent feature
> in org! Problem for me is that many resulting tables have a total
> time of 0:00. The problem is not really the zero time I spent but the
> appearance of the tables with zero total time.
>
> Is there a possibility to skip getting such tables? Rational: I do
> not need to show my boss or customer days where I spent 0:00 time on
> the project.
Now you can set :stepskip0 to achieve this.
Patch by Bernt Hansen:
> When org-clock-report-include-clocking-task is set we always add the
> current clocking task to the clock report. This is incorrect if you
> are looking at an agenda clock report for a time range that does not
> include the current clocking task (e.g. yesterday or last week).
>
> Now we only include the current clocking task if the clock report
> date range includes the current clocking task start time.
i/q/C-g Ignore this question; the same as keeping all the idle time.
k/K Keep X minutes of the idle time (default is all). If this
amount is less than the default, you will be clocked out
that many minutes after the time that idling began, and then
clocked back in at the present time.
g/G Indicate that you \"got back\" X minutes ago. This is quite
different from 'k': it clocks you out from the beginning of
the idle period and clock you back in X minutes ago.
s/S Subtract the idle time from the current clock. This is the
same as keeping 0 minutes.
C Cancel the open timer altogether. It will be as though you
never clocked in.
j/J Jump to the current clock, to make manual adjustments.
For all these options, using uppercase makes your final state
to be CLOCKED OUT.
Bastien Guerry
Niels Giesen
Julien Danjou
Benjamin Drieu
Carsten Dominik
Achim Gratz
Achim Gratz
Bernt Hansen
David Maus
Manish Sharma
Magnus Henoch
Philip Rooke
John Wiegley