This behavior is now parallel to the treatment of outline nodes.
This commit also introduces another change. When an outline node or a
plain list item is folded by outline and contains hidden children,
M-left/right will refuse to act on this item. You must either open
the tree, or use the subtree commands M-S-left and M-S-right.
Based on a patch by Matti De Craene, but significantly modified after
a discussion involving Bernt Hansen and others.
David Maus writes:
> When `org-previous-item' is called on an item with nothing above it
> Orgmode enters an infinite loop. The reason is that
> `org-previous-item' searches for non-empty lines by moving point up
> line by line and if there is nothing above an item point gets stuck on
> begin of buffer.
>
> example.org
> ,----
> |
> | - Item
> `----
>
> Move point on Item, M-x org-previous-item RET and Orgmode enters the
> infinite loop.
>
> Attached patch adds a conditional clause to `org-previous-item' that
> leaves the search loop if point reaches beginning of buffer.
Nicolas Girard writes:
> My point was, in the following two examples, the empty lines right
> before "C" should be preserved in the LaTeX output.
>
> Cheers,
> Nicolas
>
> #===
> - A2
> - B2
>
> C
> #===
>
>
> #===
> - A3
> - B3
>
>
> C
> #===
Daniel Hackney writes:
> When attempting to use radio lists for exporting in LaTeX, I
> found that they didn't work. I am using the example file shown
> below:
>
> ---BEGIN_EXAMPLE---
>
> #+LaTeX: % BEGIN RECEIVE ORGLST programs
> #+LaTeX: % END RECEIVE ORGLST programs
>
> #+ORGLST: SEND programs org-list-to-latex
> - Emacs text editor
> - Ubuntu Linux
> - Git version control system
> - Firefox web browser
> - Drupal content management system
> - Subversion version control system
> - Eclipse integrated development environment
>
> ---END_EXAMPLE---
>
> I eventually ran `org-list-send-list' manually on the list, and
> got the following error:
>
> funcall: Wrong type argument: number-or-marker-p, (unordered
> #("Emacs text editor" [snip...]
>
> I started debugging `org-list-send-list' and found that the error
> occurred when calling (funcall transform list). Looking back, I
> saw that `transform' was assigned (in the let*) after
> `item-beginning'. Stepping through the execution, I saw that
> `transform' was being assigned a value of `-'. It turns out when
> assigning to `item-beginning', (org-list-item-beginning) is
> called, which runs a regular expression with a capture group,
> overwriting the previously matched capture group.
>
> Luckily, the fix is simple; all that needs be done is to switch
> the assignment to `transform' with `item-beginning' so the regex
> in (org-list-item-beginning) doesn't override the match-string
> data. I tried this fix out and it worked perfectly.
Dan Davison writes:
> If you start a numbered list with
>
> 1.
>
> and hit M-RET then you get
>
> 2.
> ^
> with a space, i.e. '2. '
>
> However, when creating the 10th list item, there is no space after
> '10.'. Same for 99 -> 100. This isn't entirely trivial, because if you
> start typing blindly after hitting M-RET, then the line you have created
> (lacking the space) will not be recognised as a list item and so
> e.g. the next M-RET will create a new heading, not a list item. [Has
> this changed recently? This seems like something obvious that others
> would have noticed.]
>
> Here's my patch.
>
> --8<---------------cut here---------------start------------->8---
> diff --git a/lisp/org-list.el b/lisp/org-list.el
> index 2fea57b..8ece3ea 100644
> --- a/lisp/org-list.el
> +++ b/lisp/org-list.el
> @@ -813,7 +813,7 @@ with something like \"1.\" or \"2)\"."
> (buffer-substring (point-at-bol) (match-beginning 3))))
> ;; (term (substring (match-string 3) -1))
> ind1 (n (1- arg))
> - fmt bobp old new)
> + fmt bobp old new delta)
> ;; find where this list begins
> (org-beginning-of-item-list)
> (setq bobp (bobp))
> @@ -835,7 +835,9 @@ with something like \"1.\" or \"2)\"."
> (delete-region (match-beginning 2) (match-end 2))
> (goto-char (match-beginning 2))
> (insert (setq new (format fmt (setq n (1+ n)))))
> - (org-shift-item-indentation (- (length new) (length old))))))
> + (setq delta (- (length new) (length old)))
> + (org-shift-item-indentation delta)
> + (if (= (org-current-line) line) (setq col (+ col delta))))))
> (org-goto-line line)
> (org-move-to-column col)))
> --8<---------------cut here---------------end--------------->8---
>
> Dan
Rainer Stengele writes:
> using org-mode for quite some time now I always look at
> operations (key sequences) I repeat a lot of times.
>
> A lot of times I start a list with an item and immediately
> indent the next item as subitem.
>
> From
>
> - item 1
> - subitem 11
>
> I go to
>
> - item 1
> - subitem 11
>
> via "M-right". Then I always want to change the style of the
> subitem list to "*". I do this via "S-right-right".
>
> I wonder how others work. I would like to automatically have
> changed the subitem list type to "*" as soon as I indent via
> "Alt-right". Next indentation should go back to "-". etc.
>
> Maybe we could introduce a variable that sets the order of
> standard list item types, in my case: "- * - * - * - *" as
> in
>
>
> - item 1
> * subitem 11
> - subitem 111
> * subitem 111
> ...
>
> very special I know but I try to reduce the keypressings as
> much as possible. Any other suggestions?
This commits adds the variable
`org-list-demote-modify-bullet' for this purpose.
TAB now cycles visibility in plain lists if the cursor is in a plain
list. This corresponds now to the new default value `t' of
`org-cycle-include-plain-lists'. If you want to treat plain list
items as part of the outline hierarchy during cycling of outline
headings (this is what a `t' value used to mean), set this variable to
`integrate'.
Setting the new option `org-hierarchical-todo-statistics' to nil will
make TODO statistics to be computed recursively. This means, not only
the direct children of a node contribute to its TODO statistics, but
the entire subtree.
You can also set the COOKIE_DATA property and add the word "recursive"
there to get recursive statistics for a specific tree.
When inserting new list entries, sometime empty lines will be
inserted automatically. This, however, makes only sense if empty
lines do not terminate the list, as configured by
`org-empty-line-terminates-plain-lists'.
This commit makes sure that, if
`org-empty-line-terminates-plain-lists' is set, automatic empty lines
will never be inserted.
Using `C-c C-x C-b' in a headline now again toggles all checkboxes
below hat headline. This feature got lost during a recent overhaul of
this function.
Reported by Chris Randle.
When a line now contains several statistics cookies, all of them will
be updated.
Jari Aalto submitted a patch to this effect which I did end up not
using. Thanks anyway!
Emacs 23 introduces `shift-selection-mode', and even turns it on by
default. Therefore, it is fair to assume that users of Emacs 23 will
expect to be able to select a region by holding down shift will moving
the cursor. This conflicts with the use of shifted cursor keys in
Org-mode for other purposes, in particular to "change the item under
the cursor", like it is done for time stamps, item bullet types, TODO
keywords and priorities.
This commit tries to support `shift-selection-mode' as much as possible,
while retaining these valuable commands keys for Org-mode. The
following things are changed:
1. The range of contexts where Org's commands do act is reduced.
- S-up and S-down no longer jump to the previous and next plain list
item - you can use the paragraph commands C-up and C-down for this
quite well.
- S-left and S-right only change the bullet type of a plain list
item when the cursor is *exactly* on the bullet, not just anywhere
in the item line.
2. When a S-cursor key is used outside a special context, a region is
started or extended.
3. When a region has already been started, it will be continue to
extend even if the S-cursor keys move the cursor into a special
context.
4. If you want S-cursor selection to work in headlines as well, you
can set the variable `org-support-shift-select' to
`even-in-headlines'. Then you need to rely on `C-c C-t' to set
TODO keywords, and on `C-c ,' to set priorities.
If you want everything to behave the way it was, set
`org-support-shift-select' to nil.
The variable `org-blank-before-new-entry' regulates if Org should
insert a blank line before a new entry, when making a new headline or
plain list item. Up to now, the possible values in each case where t
or nil, i.e. unconditionally do or don't insert a blank line.
Now each setting can also be `auto'. If this is the case, Org will
look if the current entry, of which the command creates a sibling,
does have a blank line before it. If yes, it will also make a blank
line. If not, it will not. This seems so useful that I have made
this behavior the default.
This commit removes some of the stuff that was specific for the LaTeX
exporter, and falls back to the default configuration that works for
all backends.
Here is what the commit does:
- The variable `org-export-latex-remove-from-headlines' is now
obsolete. Instead, also LaTeX export now responds to the settings
in the variables org-export-with-todo-keywords',
`org-export-with-priority', and `org-export-with-tags' and in the
corresponding OPTION settings.
- Removal of time stamps and related keywords now already happens in
the preprocessor, so that it will be perfectly the same for all
backends.
- The list functions have been extended to accept an additional
parameter list, to overrule the default setting for a particular
list function. This is used to make the checkbox appearance in
LaTeX configurable, through the new variable
`org-export-latex-list-parameters'.
This cleans up the implementation of the timer. Most important change
is that, after starting a time list with `C-c C-x -', you can then
simply use M-RET to add new items, which is addictive!
This patch introduces a new variable,
`org-list-two-spaces-after-bullet-regexp'. It can be a regular
expression matching plain list bullets. When it matches, changing the
bullet type will introduce two spaces instead of one after each
bullet.
For example,
(setq org-list-two-spaces-after-bullet-regexp "[.)]")
will make two spaces after "1." and "1)".
Commands that modify the bullet style of a plain list, or that
renumber such a list may lead to changes in the width of a bullet.
The indentation of the lines below such a bullet is now automatically
adapted.
Also fixes a bug in bullet style cycling.
Org sometimes hits a "Before first heading" error. This error happens
when `outline-back-to-heading' is called before the first heading in a
buffer. In normal use, this is something easy to fix, because of
course you know where you are and you can identify the problem.
However, when Org scans many different buffers, for example to collect
agenda entries, you may not be able to tell easily where this error
happened. This patch introduces a wrapper around
`outline-back-to-heading', with improving the error message by
spelling out buffer and location.
These are changes that where made in the Emacs CVS.
The change in org-publish is not final, it is still being
discussed - however, the current change should make it possible
to compile and run the code with the latest CVS version of Emacs.
Carsten Dominik
Bernt Hansen
Bastien Guerry