Of course, an updated patch is attached.
Best -- Eric
Carsten Dominik <carsten.dominik@gmail.com> writes:
> Hi Eric,
>
> I tried to apply the patch, but it does not apply cleanly, maybe due
> to other changes. Can I ask you to update and resubmit?
>
> Thanks!
>
> - Carsten
>
> On Jun 21, 2010, at 6:37 PM, Eric Schulte wrote:
>
>> Hi Robert,
>>
>> Thanks for the thoughtful message.
>>
>> I present a couple of solutions below.
>>
>> Robert Cunningham <robut@iinet.net.au> writes:
>>
>>> G'day All,
>>>
>>> I wonder if I've missed something and there is a better way.
>>>
>>> Essentially I'm trying to use org babel with R and LaTeX to create
>>> figures
>>> with both long and short captions (for contents)
>>>
>>> I'd started with:
>>>
>>> #+CAPTION: Nice data (filled points indicate less nice data)
>>> #+LABEL: fig:nicedata
>>> #+ATTR_LaTeX: width=0.98\textwidth
>>> #+begin_src R :file ndata.pdf :width 1000 :height 617 :exports
>>> results
>>> dotchart(data$ndata)
>>> #+end_src
>>>
>>> which pointed to the need for long/short captions...
>>>
>>> feeling hopeful I tried:
>>>
>>> #+CAPTION: Nice data [Nice data (filled points indicate less nice
>>> data)]
>>> #+LABEL: fig:nicedata
>>> #+ATTR_LaTeX: width=0.98\textwidth
>>> #+begin_src R :file ndata.pdf :width 1000 :height 617 :exports
>>> results
>>> dotchart(data$ndata)
>>> #+end_src
>>>
>>
>> I'm attaching a patch [1] which adds shortname support for captions.
>> Once
>> applied, the following syntax will result in a caption with a
>> shortname
>> and a longname.
>>
>> --8<---------------cut here---------------start------------->8---
>> some pre-table text
>>
>> #+source: g-nicedata
>> #+begin_src gnuplot :file graph.png :exports results
>> plot sin(x)
>> #+end_src
>>
>> #+Caption: [nice data]{a longer description of the niceness of the
>> data}
>> #+results: g-nicedata
>> [[file:graph.png]]
>>
>> some post-table text
>> --8<---------------cut here---------------end--------------->8---
>>
>> however, while this patch is still pending there is an Org-babel
>> solution below which should work immediately.
>>
>>>
>>>
>>> but no luck there.
>>>
>>> Next effort was to try to use R and LaTex more directly with
>>> noweb. I tried
>>> this:
>>>
>>>
>>>
>>> #+srcname: r-nicedata
>>> #+begin_src R :session :file ndata.pdf :results output :exports
>>> results
>>> dotchart(data$ndata)
>>> #+end_src
>>>
>>>
>>> #+begin_src latex :noweb yes
>>> \begin{figure}[htb!]
>>> \centering
>>> \includegraphics[width=0.98\textwidth]{<<r-nicedata()>>}
>>> \caption[Nice data]{Nice data (filled points indicate less nice
>>> data)}
>>> \label{fig:nicedata}
>>> \end{figure}
>>> #+end_src
>>>
>>>
>>>
>>> This does produce the figure and long/short contents BUT ALSO
>>> produces this:
>>>
>>> #+results: r-nicedata
>>> [[file:ndata.pdf]]
>>>
>>> which upon export results in a link and consequently the plot
>>> appearing both
>>> in the figure and elsewhere. This second plot is unwelcome.
>>>
>>> I've tried assorted :results and :output options but have not found
>>> how to
>>> suppress the #+results: but still obtain the figure. I've always used
>>> the :session option.
>>>
>>> I've also tried twigging an org-export option to suppress pdf
>>> export but the
>>> link is still exported so that is not a solution.
>>>
>>> The current "working" solution is to use the noweb approach and
>>> then use sed
>>> to clean out the links to the second image-ugly to say the least!
>>>
>>
>> You were very close with the noweb approach. The following
>> combination
>> should work -- notice the ":results silent" header argument to the
>> source block.
>>
>> --8<---------------cut here---------------start------------->8---
>> some pre-table text
>>
>> #+source: g-nicedata
>> #+begin_src gnuplot :file graph.png :results silent :exports none
>> plot sin(x)
>> #+end_src
>>
>> #+begin_src latex :noweb yes
>> \begin{figure}[htb!]
>> \centering
>> \includegraphics[width=0.98\textwidth]{<<g-nicedata()>>}
>> \caption[Nice data]{some nice data -- filled points indicate less
>> nice data}
>> \label{fig:nicedata}
>> \end{figure}
>> #+end_src
>>
>> some post-table text
>> --8<---------------cut here---------------end--------------->8---
>>
>> is exported to the following latex,
>>
>> --8<---------------cut here---------------start------------->8---
>> some pre-table text
>>
>>
>>
>> \begin{figure}[htb!]
>> \centering
>> \includegraphics[width=0.98\textwidth]{graph.png}
>> \caption[Nice data]{some nice data -- filled points indicate less
>> nice data}
>> \label{fig:nicedata}
>> \end{figure}
>>
>> some post-table text
>> --8<---------------cut here---------------end--------------->8---
>>
>> Hope this helps,
>>
>> Best -- Eric
>>
>>>
>>>
>>>
>>> All this with org version 6.36c
>>>
>>>
>>> What have I missed? What is the best way to do this?
>>>
>>>
>>> Cheers,
>>>
>>> Robert Cunningham
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Please use `Reply All' to send replies to the list.
>>> Emacs-orgmode@gnu.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>> Footnotes:
>> [1] From 6a55dcab99bbd7840117b8390ab5db347d2573ef Mon Sep 17
>> 00:00:00 2001
>> From: Eric Schulte <schulte.eric@gmail.com>
>> Date: Mon, 21 Jun 2010 09:02:37 -0700
>> Subject: [PATCH] add short-names to #+captions with support for
>> latex export
>>
>> captions specified with the following syntax
>> #+CAPTION: [shortname]{longname}
>> will have their short and longnames handled appropriately.
>>
>> Thanks to Robert Cunningham for suggesting this feature.
>>
>> * lisp/org-exp.el (org-export-attach-captions-and-attributes): adding
>> a shortname attribute to caption strings under the symbol name
>> org-caption-shortn.
>>
>> * lisp/org-latex.el (org-export-latex-tables): handling caption short
>> names on table export
>>
>> (org-export-latex-convert-table.el-table): handling caption short
>> names on table.el type table export
>>
>> (org-export-latex-links): handling caption short names on link/image
>> export
>>
>> (org-export-latex-format-image): now takes an optional argument
>> specifying a caption short name
>> ---
>> lisp/org-exp.el | 14 +++++++++-----
>> lisp/org-latex.el | 21 ++++++++++++++-------
>> 2 files changed, 23 insertions(+), 12 deletions(-)
>>
>> diff --git a/lisp/org-exp.el b/lisp/org-exp.el
>> index 029e4d7..466d7da 100644
>> --- a/lisp/org-exp.el
>> +++ b/lisp/org-exp.el
>> @@ -1256,7 +1256,7 @@ the current file."
>> (goto-char (point-min))
>> (while (re-search-forward org-bracket-link-regexp nil t)
>> (org-if-unprotected-at (1+ (match-beginning 0))
>> - (let* ((md (match-data))
>> + (let* ((md (match-data))
>> (desc (match-end 2))
>> (link (org-link-unescape (match-string 1)))
>> (slink (org-solidify-link-text link))
>> @@ -1381,8 +1381,8 @@ removed as well."
>> select-tags "\\|")
>> "\\):"))
>> (re-excl (concat ":\\(" (mapconcat 'regexp-quote
>> - exclude-tags "\\|")
>> - "\\):"))
>> + exclude-tags "\\|")
>> + "\\):"))
>> beg end cont)
>> (goto-char (point-min))
>> (when (and select-tags
>> @@ -1593,11 +1593,14 @@ table line. If it is a link, add it to the
>> line containing the link."
>> "^[ \t]*\\(|[^-]\\)"
>> "\\|"
>> "^[ \t]*\\[\\[.*\\]\\][ \t]*$"))
>> - cap attr label end)
>> + cap shortn attr label end)
>> (while (re-search-forward re nil t)
>> (cond
>> ((match-end 1)
>> - (setq cap (concat cap (if cap " " "") (org-trim (match-string 1)))))
>> + (setq cap (concat cap (if cap " " "") (org-trim (match-string 1))))
>> + (when (string-match "\\[\\(.*\\)\\]{\\(.*\\)}" cap)
>> + (setq shortn (match-string 1 cap)
>> + cap (match-string 2 cap))))
>> ((match-end 2)
>> (setq attr (concat attr (if attr " " "") (org-trim
>> (match-string 2)))))
>> ((match-end 3)
>> @@ -1609,6 +1612,7 @@ table line. If it is a link, add it to the
>> line containing the link."
>> (point-at-eol)))
>> (add-text-properties (point-at-bol) end
>> (list 'org-caption cap
>> + 'org-caption-shortn shortn
>> 'org-attributes attr
>> 'org-label label))
>> (if label (push (cons label label) target-alist))
>> diff --git a/lisp/org-latex.el b/lisp/org-latex.el
>> index 01a4b05..6c2aab2 100644
>> --- a/lisp/org-latex.el
>> +++ b/lisp/org-latex.el
>> @@ -1576,7 +1576,7 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (org-table-last-column-widths (copy-sequence
>> org-table-last-column-
>> widths))
>> fnum fields line lines olines gr colgropen line-fmt align
>> - caption label attr floatp longtblp)
>> + caption shortn label attr floatp longtblp)
>> (if org-export-latex-tables-verbatim
>> (let* ((tbl (concat "\\begin{verbatim}\n" raw-table
>> "\\end{verbatim}\n")))
>> @@ -1585,6 +1585,8 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (progn
>> (setq caption (org-find-text-property-in-string
>> 'org-caption raw-table)
>> + shortn (org-find-text-property-in-string
>> + 'org-caption-shortn raw-table)
>> attr (org-find-text-property-in-string
>> 'org-attributes raw-table)
>> label (org-find-text-property-in-string
>> @@ -1652,7 +1654,8 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (if floatp "\\begin{table}[htb]\n"))
>> (if floatp
>> (format
>> - "\\caption{%s%s}"
>> + "\\caption%s{%s%s}"
>> + (if shortn (concat "[" shortn "]") "")
>> (if label (concat "\\\label{" label
>> "}") "")
>> (or caption "")))
>> (if (and longtblp caption) "\\\\\n" "\n")
>> @@ -1680,10 +1683,11 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>>
>> (defun org-export-latex-convert-table.el-table ()
>> "Replace table.el table at point with LaTeX code."
>> - (let (tbl caption label line floatp attr align rmlines)
>> + (let (tbl caption shortn label line floatp attr align rmlines)
>> (setq line (buffer-substring (point-at-bol) (point-at-eol))
>> label (org-get-text-property-any 0 'org-label line)
>> caption (org-get-text-property-any 0 'org-caption line)
>> + shortn (org-get-text-property-any 0 'org-caption-shortn line)
>> attr (org-get-text-property-any 0 'org-attributes line)
>> align (and attr (stringp attr)
>> (string-match "\\<align=\\([^ \t\n\r,]+\\)" attr)
>> @@ -1721,7 +1725,8 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (setq tbl (concat "\\begin{center}\n" tbl "\\end{center}")))
>> (when floatp
>> (setq tbl (concat "\\begin{table}\n"
>> - (format "\\caption{%s%s}\n"
>> + (format "\\caption%s{%s%s}\n"
>> + (if shortn (format "[%s]" shortn) "")
>> (if label (format "\\label{%s}" label) "")
>> (or caption ""))
>> tbl
>> @@ -1822,6 +1827,7 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> "file")))
>> (coderefp (equal type "coderef"))
>> (caption (org-find-text-property-in-string 'org-caption
>> raw-
>> path))
>> + (shortn (org-find-text-property-in-string
>> org-caption-shortn raw-path))
>> (attr (or (org-find-text-property-in-string
>> org-attributes raw-
>> path)
>> (plist-get org-export-latex-options-plist
>> :latex-image-
>> options)))
>> (label (org-find-text-property-in-string 'org-label raw-path))
>> @@ -1859,7 +1865,7 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (plist-get org-export-latex-options-plist :inline-images))
>> ;; OK, we need to inline an image
>> (insert
>> - (org-export-latex-format-image raw-path caption label attr)))
>> + (org-export-latex-format-image raw-path caption label
>> attr shortn)))
>> (coderefp
>> (insert (format
>> (org-export-get-coderef-format path desc)
>> @@ -1889,7 +1895,7 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (t (insert "\\texttt{" desc "}")))))))
>>
>>
>> -(defun org-export-latex-format-image (path caption label attr)
>> +(defun org-export-latex-format-image (path caption label attr
>> &optional shortn)
>> "Format the image element, depending on user settings."
>> (let (ind floatp wrapp multicolumnp placement figenv)
>> (setq floatp (or caption label))
>> @@ -1932,7 +1938,7 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (floatp "\\begin{figure}%placement
>> \\centering
>> \\includegraphics[%attr]{%path}
>> -\\caption{%labelcmd%caption}
>> +\\caption%shortn{%labelcmd%caption}
>> \\end{figure}")
>> (t "\\includegraphics[%attr]{%path}")))
>>
>> @@ -1953,6 +1959,7 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (expand-file-name path)
>> path))
>> (cons "attr" attr)
>> + (cons "shortn" (if shortn (format "[%s]" shortn) ""))
>> (cons "labelcmd" (if label (format "\\label{%s}"
>> label)""))
>> (cons "caption" (or caption ""))
>> --
>> 1.7.0.4
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Please use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
> - Carsten
>From 5cbb38e25a2d2eae7c3c688d347f80619ecb8463 Mon Sep 17 00:00:00 2001
From: Eric Schulte <schulte.eric@gmail.com>
Date: Thu, 1 Jul 2010 08:07:17 -0700
Subject: [PATCH] add short-names to #+captions with support for latex export
captions specified with the following syntax
#+CAPTION: [shortname]{longname}
will have their short and longnames handled appropriately.
Thanks to Robert Cunningham for suggesting this feature.
* lisp/org-exp.el (org-export-attach-captions-and-attributes): adding
a shortname attribute to caption strings under the symbol name
org-caption-shortn.
* lisp/org-latex.el (org-export-latex-tables): handling caption short
names on table export
(org-export-latex-convert-table.el-table): handling caption short
names on table.el type table export
(org-export-latex-links): handling caption short names on link/image
export
(org-export-latex-format-image): now takes an optional argument
specifying a caption short name
* lisp/org-exp.el (org-export-handle-table-metalines): this function
removes table specific meta-lines, now that we aren't wiping
everything that looks remotely like a comment at the end of the
export process we have to be sure to catch all of the specific lines
in org-exp.el
* lisp/org-exp.el: (org-export-select-backend-specific-text) Properly
get rid of #+Backend and #+ATTR_Backend specifics to backends not
matching the one we're exporting to.
Patch by Carsten
* lisp/org-exp.el (org-export-mark-blockquote-verse-center): fixed
small bug, now grabbing match data before overwritten by looking-at
this fixes a problem with remainders of #+end_quote lines appearing
in exported output
* lisp/org-exp.el (org-export-format-source-code-or-example): Mark examples
by a property. o
* lisp/org-html.el (org-export-html-close-lists-maybe): Check if raw
HTML stuff was actually made from an example
Daniel Mahler writes:
> 2. I would like to embed source blocks in numbered lists, without
> breaking the numbering ie:
>
> 1) get ready
> #+BEGIN_SRC sh
> get_ready
> #+END_SRC
> 2) go
> #+BEGIN_SRC sh
> go
> #+END_SRC
>
> currently the src blocks cause the numbering to reset, so all
> items in a sequence like this are numbered 1
This patch fixes this issue - but I cannot say anymore why the code in
org-export-html-close-lists-maybe does in fact work. The code looks
wrong, but it seems to work. What looks wrong is that i does not
check for the true indentation in the case when the line is not
protected. It must be that this case is covered by some other code
further down in the exporter.
* lisp/org-exp.el: comment regexp now matches documentation. No more
protection check when deleting comments before export.
Thanks to Nicolas Goaziou <n.goaziou@gmail.com> for this patch.
* lisp/org-exp.el (org-export-preprocess-string):
now using `org-export-handle-include-files-recurse' to resolve
included files
(org-export-handle-include-files): now returns a list of the
included files
(org-export-handle-include-files-recurse): recursively calls
`org-export-handle-include-files' while checking to see if the
process has entered an infinite loop.
Thanks to Eric Schulte for this patch.
* lisp/org-exp.el (org-export-remove-special-table-lines): Only fix table
lines that are not protected text.
Giovanni Moretti writes:
> I'm working up a presentation on orgmode for a local club and needed
> to prefix it with a brief emacs overview, and so included this:
>
> #+BEGIN_EXAMPLE
> ctrl-P (previous line)
> |
> |
> Ctrl-A <<< Ctrl-B <---- o ----> Ctrl-F >>> Ctrl-E
> Col 1 back char ! fwd char EOL
> !
> ctrl-N (next line)
> #+END_EXAMPLE
>
> : ctrl-P (previous line)
> : |
> : |
> : Ctrl-A <<< Ctrl-B <---- o ----> Ctrl-F >>> Ctrl-E
> : Col 1 back char | fwd char EOL
> : |
> : ctrl-N (next line)
>
> I'm using Orgmode v6.36c and when exporting to HTML (and LaTex
> Beamer), the two lines containing the single vertical bar immediately
> below the "ctrl-P" line in the #+EXAMPLE block vanish, whereas using
> the alternate colon at the beginning of the line notation, the
> rendering is as expected.
>
> Interestingly, enabling the +n option (#+BEGIN_EXAMPLE +n) causes the
> missing lines (lines 2 & 3) to reappear.
* doc/org.texi (Subscripts and superscripts): Document that `C-c C-x \'
will also format sub and superscripts.
* doc/orgcard.tex: Document that `C-c C-x \'
will also format sub and superscripts.
* lisp/org.el (org-use-sub-superscripts):
(org-pretty-entities-include-sub-superscripts): Move here from
org-exp.el.
(org-set-regexps-and-options): Parse subscript option and set
`org-use-sub-superscripts' as a local variable.
(org-match-sexp-depth):
(org-create-multibrace-regexp):
(org-match-substring-regexp):
(org-match-substring-with-braces-regexp): Moved here from org-exp.el
(org-set-font-lock-defaults): Call `org-raise-scripts'.
(org-remove-font-lock-display-properties): New function.
(org-unfontify-region): Call
`org-remove-font-lock-display-properties'.
(org-script-display): New constant.
(org-raise-scripts): New function.
When turning on entity display with `C-c C-x \', sub- and superscripts
will also be displayed in a smaller font, and raised/lowered.
Jan Bcker writes:
> If you have a headline with an elisp code block containing the following
> line:
>
> " :ID:"
>
> the HTML code will be garbled at the beginning of the headline.
>
> I have attached a minimal test case and the resulting HTML file. The
> #+OPTIONS: line is not needed, but is included to make the HTML file
> less cluttered.
>
> There has to be whitespace between the " and :ID: and the string must be
> ended on the same line. For example, these lines trigger the bug:
>
> " :ID:"
> " :ID:"
> " :ID: garble-my-html"
>
> while these do not:
>
> ":ID:"
> ":ID: garble-my-html"
> " :ID:
>
This new code will search #+INDEX lines in the buffer. For LaTeX, it
will simple convert these into LaTeX \index{} commands. For other
backends, it will copy thee entries to a new file, with extension
orgx. These files can then later be post-processed to create the index.
Eric Fraga writes:
> What am I missing? I tried exporting the following to HTML and the
> caption and HTML attributes seem to be ignored completely. Also, the
> alignment directives are ignored as well.
>
> --8<---------------cut here---------------start------------->8---
> #+TITLE: test file for org mode
> #+DESCRIPTION: used for bug reports
> #+AUTHOR: Eric S Fraga
> #+EMAIL: Eric S Fraga <e.fraga@ucl.ac.uk>
> #+DATE: 2010-03-11 Thu
> #+KEYWORDS:
> #+LANGUAGE: en
> #+OPTIONS: H:3 num:t toc:t \n:nil @:t ::t |:t ^:t -:t f:t *:t <:t
> #+OPTIONS: TeX:t LaTeX:t skip:nil d:nil todo:t pri:nil tags:not-in-toc
> #+INFOJS_OPT: view:nil toc:nil ltoc:t mouse:underline buttons:0 path:http://orgmode.org/org-info.js
> #+EXPORT_SELECT_TAGS: export
> #+EXPORT_EXCLUDE_TAGS: noexport
> #+LINK_UP:
> #+LINK_HOME:
>
> * tables
>
> #+caption: A very interesting table
> #+attr_html: border="1" rules="all" frame="all" align="center"
> | <r> | <l> |
> | Id | Description |
> |-----+--------------------------------|
> | 1. | The first item |
> | 2. | the second |
> | 4. | we don't have a third one |
> | 10. | a longer id to check alignment |
> |-----+--------------------------------|
> --8<---------------cut here---------------end--------------->8---
>
> I'm using org current as of yesterday Org-mode version 6.34trans
> (release_6.34c.186.g1902) and with GNU Emacs 23.1.1
> (i486-pc-linux-gnu, GTK+ Version 2.18.2) of 2009-11-02 on raven,
> modified by Debian
This change provides for better export of named source-code blocks,
with specific support for more attractive html export. The arguments
are included with the source code name, and both the source code name
and code body are wrapped in a div to support styling with css. For
example the following CSS can be used to associate a source-code block
name with it's code body, and to slightly indent the body.
.org-src-container {
border-left: 4px solid gray;
padding: 0.5em 0.5em 0.5em 1em; }
.org-src-container pre {
margin-left: 1em; }
Marting G. Skjaeveland writes:
> I pulled a fresh copy of org-mode this morning and noticed that
> references to source code line numbers no longer work as they used
> to. Instead of displaying the number of the line with the label, the
> label is displayed.
>
> Exporting the following example, retrieved from the online
> documentation (http://orgmode.org/manual/Literal-examples.html),
>
> -------------------------------------start
> #+BEGIN_SRC emacs-lisp -n -r
> (save-excursion (ref:sc)
> (goto-char (point-min)) (ref:jump)
> #+END_SRC
>
> In line [[(sc)]] we remember the current position. [[(jump)][Line
> (jump)]] jumps to point-min.
>
> -------------------------------------end
>
> gives me in latex export
>
> -------------------------------------start
> \begin{verbatim}
> 1: (save-excursion
> 2: (goto-char (point-min))
> \end{verbatim}
>
> In line \hyperref[(sc)]{(sc)} we remember the current
> position. \hyperref[(jump)]{Line (jump)} jumps to point-min.
> -------------------------------------end
>
When exporting to html the source-code block name will be included
as a <label> immediately preceding the exported code. This <label>
is decorated with the 'org-src-name' css class.
When exporting to LaTeX with the listings package the source-code
block name will be included as a listings \title for the code
block. Currently the name will not be exported when the listings
package is not in use.
Christopher Suckling writes:
> Thank you, but not quite working yet:
>
> ,----
> | #+BIND: org-export-latex-title-command ""
> `----
>
> now appears to be having the *effect* of setting a global variable.
>
> I load Emacs then visit the below test org file. I then export the file.
>
> I get a \maketitle line.
>
> I then C-c C-c on the #+BIND: line and re-export.
>
> \maketitle is removed.
>
> I then export another org file without the #+BIND: line.
>
> There is no \maketitle, even though there should be.
>
> I add
>
> ,----
> | #+BIND: org-export-latex-title-command "\foobar"
> `----
>
> to the new org file, C-c C-c and export:
>
> \foobar is added to the exported file.
>
> Finally, I re-export the original test org file (without C-c C-c on the
> #+BIND: line):
>
> \foobar is added to the exported file.
>
> However,
>
> ,----
> | C-h v org-export-latex-title-command
> `----
>
> always returns the value "\\maketitle", no matter what the value of the
> #+BIND: line.
>
> Best, Christopher
file+sys:/path/to/file will use the system to open the file, like
double-clicking would
file+emacs:/path/to/file will force opening by Emacs
Also, when using C-c C-o on a headline of get a list of links in the
entry, pressing RET will open *all* links. This allows something like
projects to be defined, with a number of files that have to be opened
by different applications.
These were requests by John Wiegley.
Exporting drawers was not really supported, now it is.
Drawers that are selected for export are formatted using the function
specified in the variable `org-export-format-drawer-function'. If
that is nil, the default `org-export-format-drawer' will publish the
drawer as a colon example, i.e. verbatim and in fixed-width.
Martin Skjaeveland writes:
> Hi all,
>
> when I import the file
>
> --8<---------------cut here---------------start------------->8---
> -----------------
> | grandmother |
> =================
> | sim:Jackeline |
> | sim:Mona |
> -----------------
> --8<---------------cut here---------------end------------->8---
>
> using the command
>
> #+INCLUDE "grandmothers.txt" example
>
> and export to latex it turns into
>
>
> \begin{verbatim}
> -----------------
> | grandmother |
> \texttt{===============}
> | sim:Jackeline |
> | sim:Mona |
> -----------------
> \end{verbatim}
>
>
> I would like to remove \texttt{ }. I have tried different export
> option settings, but I can't make it work.
>
When a backend selects its #+begin_backend ... #+end_backend
code, the markers need to be removed so that a package like
org-special-blocks.el does not try to work on the block again.
There was an issue that lines starting with a space followed by #
would be protected when importing the file, but not unprotected when
formatting the example. The reason for this issue is that we recently
changed to protect indented #+ lines.
The width and alignment in table columns can be set with a cookie like
"<10>" or "<r>" or "<r10>". In order to keep Org from exporting such
lines, the first column of a line can contain only "/". However, for
convenience, this commit implements a special case: If the entire row
contains only sch markers, the line will automatically be discarded
during export.
Eric Schulte writes:
> Attached is a small patch for a small issue.
>
> Sometimes a language uses a major mode which can't be guessed
> from it's name. This patch introduces the `org-src-lang-modes'
> variable which can be used to map language names to major modes
> when this is the case. This is used when editing a source-code
> block, or when exporting fontified source-code with htmlize.
>
> So far the only instance of this that I know of is ocaml and
> tuareg-mode, so that's the only thing that `org-src-lang-modes'
> is pre-populated with. Maybe there are other instances as well?
However, if you are using arguments, it is required that the opening
parenthesis is attached to the macro name, and that the closing
parenthesis is attached to the three closing braces.
Hsiu-Khuern writes:
> Hi all,
>
> The footnote at the bottom of section 13.1.4 ("Publishing
> action") of the Org manual says that publishing org files to
> the same directory using org-publish-org-to-org results in
> files named like file-source.org. It actually results in
> file.org-source, which is not as nice. I believe the
> problem is in the org-export-as-org function in org-exp.el.
Allow whitespace in code references. Allow the -r switch to remove the
references in the source code even when the lines are not numbered: the
labels can be explicit enough. Note that "-r -k" is the same than no
switch - as expected.
Thanks to Ulf Stegemann for bring this up.
As reported by Ulf Stegemann (09/07/2009) the HTML output
of the example in the manual would result in no number for
the first line. It is because `org-export-number-lines' is
told to skip one line while the line inserted previously
(i.e. "<pre class ...>") doesn't end with a newline.
Many different people want to set many different variables in a
buffer-local way for export. This cannot be done with file variables,
because the Org buffer is not current while the exporter is running.
Lots of variables can be set with the #+OPTIONS lines, but finding
abbreviations goes only so far.
Therefore we have now a general mechanism that can be used to bind
variables during export operations.
a line like: #+BIND: variable value
will bind the variable to value. For example,
the line
>> #+OPTIONS: toc:nil
can now equivalently be written as
>> #+BIND: org-export-with-toc nil
Stefan Vollmar writes:
> taking up a nice suggestion from Sebastian Rose, I want to
> present some org source with proper syntax highlighting. However,
> there is a problem when using "BEGIN_SRC" blocks it seems.
>
> If one puts this org contents into a file "test.org":
>
> * One Headline
> Some Text
> #+BEGIN_SRC python
> print "some output"
> #+END_SRC
> * Another headline
> More text
>
> and renders it from another org-file with:
>
> #+INCLUDE: "./test.org" src org
>
> everything will be fine (beautiful, infact) up to and including
> the print-line - the rest of the org file is not rendered as
> source but interpreted.
This commit adds a new hook `org-src-mode-hook'.
The Hook run after Org switched a source code snippet to
its Emacs mode. This hook will run
- when editing a source code snippet with \"C-c '\".
- When formatting a source code snippet for export with htmlize.
You may want to use this hook for example to turn off `outline-minor-mode'
or similar things which you want to have when editing a source code file,
but which mess up the display of a snippet in Org exported files.
As the export preprocessor removes indentation from indented blocks,
this causes conflicts about interpreting indentation as list
termination. Now the original indentation is stored in a text
property, so hopefully the exporters can make use of this information
in due time.
All export commands now push the result to the kill ring by default.
This is subject to the variable `org-export-push-to-kill-ring'.
Also, this commit adds a new variable
`org-export-show-temporary-export-buffer' which can be used to turn
off the display of the temporary buffer containing the exported text.
Since this stuff is now automatically pushed onto the kill ring, some
people might prefer not to see this buffer.
There is now a new export function, `org-export-as-org', which
basically creates a copy of the Org file with things like archived
trees, commented trees, and trees deselected by export tags,
stripped.
This commit adds:
{{{date(FORMAT)}}} current date/time, formatted with
`format-time-string'
{{{modification-time(FORMAT)}}} date/time of last modification of
file, formatted with `format-time-string'
{{{input-file}}} the file name of the source Org file.
Shaun Johanson writes:
> Consider the following Org file:
>
> * Test
>
> See [[(foo)][FOOBIE]]
>
> #+BEGIN_EXAMPLE
> <foo>: blah blah (ref:foo)
> #+END_EXAMPLE
>
> Question 1)
> In Org mode the link displays as FOOBIE, in the exported HTML it
> displays as (foo). Is there any way to cause the link to use the
> description (FOOBIE) in HTML? If not would this be a useful option
> to add?
This was a bug, fixed now.
Jason Riedy writes:
> I'm trying to change org-export-latex-image-default-option
> to "width=.7\\linewidth" in a file local variable. It's set
> correctly as a buffer local variable, and it's having no
> effect on the export. My guess is that the buffer-local
> property is stopping it as soon as org-export-as-latex runs
> set-buffer.
>
> I can smuggle the value in by adding an entry to org-export-plist-vars
> referring to org-export-latex-image-default-option and pulling the value
> from the plist, but that feels incorrect.
It is actually the correct way to do this, and I have
implemented this change.
Samuel Wales writes:
> I frequently export to ascii without wanting a file to be created,
> especially not in a useful directory, as the files are temporary.
>
> Is there a way to export ascii to just a buffer?
There is now, `C-c C-e A'.
This commit also implements commands
- org-export-as-ascii-to-buffer
- org-replace-region-by-ascii
- org-export-region-as-ascii
which are similar to what is available for HTML and LaTeX.
`C-c C-e A' used to be the key for publishing all projects.
This functionality has now been moved to `C-c C-e E'.
Chris Gray had the idea to have arbitrary blocks turned in LaTeX
environments and HTML divs. These three new hooks allow
implementation has an add-on rather than a patch.
Thomas Morgan writes:
> I just tried exporting an Org file with LaTeX fragments to HTML
> on a computer that doesn't have dvipng. There were error messages
> in *Messages* ("Failed to create png file..."), but this wasn't
> obvious to me at first glance because those messages were replaced
> in the echo area by "Exporting... done" before I could see them.
>
> So I was wondering, is there a good way to make the user aware of
> those errors? Maybe by printing "Exporting... done (with errors)"?
There is now a better error message when either the latex or the
dvipng program does not exist.
Matt Lundin writes:
> If it's not too much trouble, I was wondering if I could
> request the following properties to set export options for
> subtrees:
>
> EXPORT_AUTHOR
> EXPORT_DATE
>
> In addition to specifying an EXPORT_FILE and EXPORT_TITLE
> for a subtree, I often find myself wanting to change the
> date and author lines.
Users can now define custom IDs for use in HTML export.
These IDs are stores as property CUSTOM_ID. When present, HTML will
prefer using these over automatic targets like "sec-N.M".
Some of the standard export options are now defined in backend
specific files. This commit makes sure that building the options
property list will not cause an error because of unneeded (for the
backend) undefined variables.
When exporting to a temporary buffer, images to replace LaTeX
fragments cannot be produced, because there is no useful location
where they can be put. Therefore, these images are not produced in
this case.
In verse environments, line breaks are now enforced both in LaTeX and
in HTML. Centering is now implemented using a div rather than a
paragraph, so that there may be several paragraphs in the centering
environment. Blockquotes now also may have several paragraphs.
Eric Schulte
Carsten Dominik
Nicolas Goaziou
Bastien Guerry
Christian Egli
Bernt Hansen
Dan Davison