When there were multiple cookies in a headline, the counting would be
double. Also the hook got called always, even if no cookie was
present.
Fixed now.
Turns out a number of people set their variables too late so that
activating dependencies does not work correctly. We now double-check
in the mode hook that everything is in order.....
This causes problems in tables.
You have now two ways to make verbatim things. Use ~xyz~ or =xyz=
depending on whether ~ or = might occur in the string......
When org-depend.el is loaded, running the blocker hook will already
toggle a tag. However, when dimming the agenda, we do not want that.
Reported by Dan Griswold.
The id for the footnotes div is now called "text-footnotes", not
"footnotes-text", to be more consistent with other divs used in
Org-mode.
Requested by Sebastian Rose.
This commit adds a key (`C-c C-x o') to toggle the ORDERED property of
a tree. And it adds menu entries for doing this, which also reflect
the current state of the tree.
When a line now contains several statistics cookies, all of them will
be updated.
Jari Aalto submitted a patch to this effect which I did end up not
using. Thanks anyway!
David Bremner writes:
I have a clocktable that begins like this.
#+BEGIN: clocktable :maxlevel 2 :block 2009-W05 :scope agenda-with-archives
Clock summary at [2009-01-27 Tue 17:15], for week 2009-W04.
[contents snipped]
#+END:
Whatever week I put in :block, it puts one less in the title. It
seems actually gather the clock data from the right week, but the
title is wrong? Or I misunderstand something as usual :-).
There was a problem wit the week starting date.
A user setting of
(setq org-show-entry-below t)
could overrule a visibility property with value FOLDED. This commit
fixes this by turning off the above setting for the context of setting
startup visibility.
I have changed my mind and turned off shift-selection support again by
default, because it causes confusing behavior, sometimes calling an Org
command and sometimes doing shift selection. The default behavior is
now:
- in special contexts, execute Org commands
- outside special contexts, create an error that will point users to
configure the variable `org-support-shift-select'. Hopefully that
will make them read the docstring and then decide for themselves
what to do.
Emacs 23 introduces `shift-selection-mode', and even turns it on by
default. Therefore, it is fair to assume that users of Emacs 23 will
expect to be able to select a region by holding down shift will moving
the cursor. This conflicts with the use of shifted cursor keys in
Org-mode for other purposes, in particular to "change the item under
the cursor", like it is done for time stamps, item bullet types, TODO
keywords and priorities.
This commit tries to support `shift-selection-mode' as much as possible,
while retaining these valuable commands keys for Org-mode. The
following things are changed:
1. The range of contexts where Org's commands do act is reduced.
- S-up and S-down no longer jump to the previous and next plain list
item - you can use the paragraph commands C-up and C-down for this
quite well.
- S-left and S-right only change the bullet type of a plain list
item when the cursor is *exactly* on the bullet, not just anywhere
in the item line.
2. When a S-cursor key is used outside a special context, a region is
started or extended.
3. When a region has already been started, it will be continue to
extend even if the S-cursor keys move the cursor into a special
context.
4. If you want S-cursor selection to work in headlines as well, you
can set the variable `org-support-shift-select' to
`even-in-headlines'. Then you need to rely on `C-c C-t' to set
TODO keywords, and on `C-c ,' to set priorities.
If you want everything to behave the way it was, set
`org-support-shift-select' to nil.
There were two bugs:
1. Timestamp processing did not honor the setting of
`org-export-with-timestamps' in the text before the first
headline.
2. When `org-export-with-timestamps' was nil, time stamps were removed
even in tables. I think this is incorrect, so in tables, time
stamps are now never removed.
The variables =org-agenda-todo-ignore-with-date=,
=org-agenda-todo-ignore-with-date=, and
=org-agenda-todo-ignore-with-date= make it possible to
exclude TODO entries which have this kind of planning info
associated with them. This is most useful for people who
schedule everything, and who use the TODO list mainly to find
things that are not yet scheduled. Thomas Morgan pointed out
that also the tags-todo search may serve exactly this
purpose, and that it might be good to have a way to make
these variables also apply to the tags-todo search. I can
see than, but could not convince myself to make this the
default. A new variable must be set to make this happen:
=org-agenda-tags-todo-honor-ignore-options=.
Formulas can now refer to fields and regions in other tables, be it in
the same file or even in different files.
This also opens the door for more interesting R support, because
arbitrary tables in a file can now be accessed with appropriate
commands.
Finally, this commit also introduces a convenience for creating
references in tables. For the purpose of references, it will always
be *assumed* that there is another hline at the end if each table. So
for example in a table that has only a single hline, to separate
header from data, you can now access all of column two with
"@I$2..@II$2".
William Henney writes:
If a heading has tags, then that heading's time summary
overlay (shown by C-c C-x C-d) is displayed using the
org-tag face. This looks a bit strange. Is it intended? It
is especially noticeable in my case, since I have my tags
shown in a smaller font.
This is cause by the fact that we use the `secondary-selection' face
here which only highlights but inherits the rest from what is below.
The idea was that these clock times should have the same color as the
headline they belong to, but this idea is defeated when a line has tags
with a very different face.
This commit introduces a separate face for this purpose, so that users
can customize it.
The conversion commands `C-c -' and `C-c *' are now better
behaved and therefore more useful, I hope.
If there is an active region, these commands will act on the
region, otherwise on the current line.
- C-c - :: This command turns headings or normal lines into
items, or items into normal lines. When there is a
region, everything depends on the first line of the
region:
- if it is a item, turn all items in the region into
normal lines.
- if it is a headline, turn all headlines in the region
into items.
- if it is a normal line, turn all lines into items.
- special case: if there is no active region and the
current line is an item, cycle the bullet type of the
current list.
- C-c * :: This command turns items and normal lines into
headings, or headings into normal lines. When there is
a region, everything depends on the first line of the
region:
- if it is a item, turn all items in the region into
headlines.
- if it is a headline, turn all headlines in the region
into normal lines.
- if it is a normal line, turn all lines into headlines.
Matt Lundin writes:
I'm have a *minor* issue to report. It occurs when I export
an org file with footnotes to LaTeX. Specifically, it has to
do with the combination of American style quotation marks
and footnotes.
According to many American manuals of style, quotation marks
are to be placed after a sentence ending period if the
quoted passage is at the end of the sentence. E.g.
,----
| Here is "a quote."
|
| not
|
| Here is "a quote".
`----
When I use American style quotation in conjuction with a
footnote, the exporter does not convert the closing quote
marks into a two single quotation marks (i.e., LaTeX smart
quotes).
Thus, the following source snippet:
,----
| This is a footnote "with a quote."[fn:sample] And here
| is another footnote "with a quote".[fn:another]
|
| [fn:sample] Here is the sample footnote.
|
| [fn:another] Another footnote.
`----
Becomes
,----
| This is a footnote ``with a quote."\footnote{Here is
| the sample footnote. } And here is another footnote ``with
| a quote''.\footnote{Another footnote. }
`----
Notice the double quotation mark (rather than two single
apostrophes) at the end of the first sentence. Notice also
the correct quotation mark format appears in the second
sentence, where the period comes after the quotation mark.
This commit addresses this issue by checking of text
protection is off not after the quotation mark, but before.
The directory used for attachments to an entry is by default chosen
automatically, with a name derived from the entry ID to make sure it
is unique.
However, in some cases it may be better to assign a user-chosen
directory to and entry, to be used for attachments. This commits
implements this change. See the documentation changes for information
on how things work.
Thanks to Jason Jackson for pushing this part.
The second change made bu this commit is that it is now possible to
inherit the attachment directory from a parent, so that an entire
project subtree can use a single directory.
Two new variables, `org-export-html-inline-image-extensions' and
`org-export-latex-inline-image-extensions' now define the file
extensions that will be considered for inlining images. The default
for HTML is png, jpg, jpeg, and gif files. The default for LaTeX is
png, jpg, jpeg, and pdf, assuming processing with `pdflatex'.
For LaTeX export, this can lead to conflicts for links that point
to non-image PDF files. To avoid that such a link will be inlined by
accident, always give a description text for such a link, one that is
not equal to the path.
The special first column in some tables was not removed for LaTeX
export. This bug was probably introduces recently, while trying to
fix problems with special characters in LaTeX tables.
Export is now working again properly.
Reported by Giovanni Ridolfi.
William Henney writes:
The following table works correctly with org-plot
#+PLOT: title:"org-plot test" ind:1 type:2d with:hist set:"style fill
solid" set:"yrange [0:]"
| Year | a | b |
|-------+---+---|
| x2006 | 3 | 1 |
| 2007 | 1 | 2 |
| 2008 | 2 | 0 |
However, if the "x" is removed from the start of all the years, it no
longer works:
#+PLOT: title:"org-plot bug" ind:1 type:2d with:hist set:"style fill
solid" set:"yrange [0:]"
| Year | a | b |
|------+---+---|
| 2006 | 3 | 1 |
| 2007 | 1 | 2 |
| 2008 | 2 | 0 |
From glancing through org-plot.el, it seems as though the problem is
that the text-ind parameter is false when all the values in the
"independent variable" column are legal numbers. However, my lisp
skills are not up to fixing this.
This patch is by Charles Sebold and Eric Schulte fixes the problem.
When a property for column view is supposed to contain a date, not
defining allowed values could lead to an obscure error message. This
is now improved.
Reported by Charles Cave.
Daniel Clemente writes:
Hi. After you eval this (for instance to count the number of
headlines under a tree):
(org-map-entries 'ignore t 'tree)
you end up with a different view of the buffer
because (org-narrow-to-subtree) was called. This seems an
unwanted side effect since narrowing is not org-map-entries' job.
Should (save-excursion) be used inside (org-map-entries
... 'tree) ?
He is right, and save-restriction is needed as well. This is
what this commit implements.
Hsiu-Khuern Tang writes:
I find that doing a tags search for SCHEDULED or DEADLINE turns
up headings that do not have any schedule or deadlines.
Using the example from
http://article.gmane.org/gmane.emacs.orgmode/10274:
#+SEQ_TODO: NEXT WAITING | DONE
#+STARTUP: overview
* DONE Test1
CLOSED: [2009-01-07 Wed 12:26]
* NEXT Test2
DEADLINE: <2009-01-28 Wed>
* Test3
If I type
C-c \ +DEADLINE<="<2009-01-28>" <RET>
all three headlines are selected! I expected to match the second
headline only.
Indeed, this exposes an error in the time comparison functions
which would take a empty time stamp to mean 0. This commit does
fix the bug.
Matt Lundin writes:
I had one more question/request concerning archives. Would
it perhaps be possible to enable the file name
substitution (i.e., "%s") after the double semi-colon, so
that the file name can be used as a headline within the
archive file? My ideal setup would be to have a single
archive file for each year's work, with headlines named
according to the original files of the archived subtrees.
E.g.,
,----
| * finances.org
| ** archived item
| * notes.org
| ** archived item
| ** another archived item
`----
This commit does implement this request.
Matt Lundin writes:
When I have multiple org files archive to a single file, as in
,----
| (setq org-archive-location "~/2009.org_archive::")
`----
I find that including archive files in the agenda display (C-u v)
results in multiple identical entries in the agenda display (in my
case, when doing a word search).
In fact, the number of duplicate lines exactly matches the number of
agenda files that archive to that file (in my case 16). Is the agenda
function perhaps searching the archive file once for each of the
agenda files and then displaying the results as separate lines?
Indeed, when putting together the list o archive files to search,
Org did not check for duplicates. This commit implements
uniquification of the list.
Lines preceded by a colon are treated as fixed-width examples.
This commit improves the moment when the protection of these lines
happens during preprocessing. And it enforces that a space must
follow the colon for the line to be treated in this way.
Friedrich Delgado Friedrichs writes:
A while ago I had this problem:
org-infojs-handle-options: Wrong type argument: stringp, nil
I wonder if my patch ever reached the mailing list, or if it
was overlooked because it was too close to christmas:
Friedrich Delgado Friedrichs schrieb:
From 0fef25f56c837ae9f434449c6f30268e0474f7ab Mon Sep 17 00:00:00 2001
From: Friedrich Delgado Friedrichs <delgado@dfn-cert.de>
Date: Tue, 23 Dec 2008 12:10:42 +0100
Subject: [PATCH] fix string-match against nil when no in-file options are set for jsinfo
---
lisp/org-jsinfo.el | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/lisp/org-jsinfo.el b/lisp/org-jsinfo.el
index 8f2d7e8..19faa9e 100644
--- a/lisp/org-jsinfo.el
+++ b/lisp/org-jsinfo.el
@@ -140,7 +140,8 @@ Option settings will replace the %MANAGER-OPTIONS cookie."
default (cdr (assoc opt org-infojs-options)))
(and (symbolp default) (not (memq default '(t nil)))
(setq default (plist-get exp-plist default)))
- (if (string-match (format " %s:\\(\\S-+\\)" opt) v)
+ (if (and v
+ (string-match (format " %s:\\(\\S-+\\)" opt) v))
(setq val (match-string 1 v))
(setq val default))
(cond
1. Export hangs during LaTeX export. That was a bug using an empty
regular expression that was defined only locally in Org files, but
not in the buffer used by the LaTeX exporter.
2. Underscores in links can get special treatment by the LaTeX
exporter. Now the link is protected from this.
When including s file in example or src markup, you can now also
specify the switches for code references and line numbering that work
also when directly adding SRC or EXAMPLE blocks.
Reported by Manish.
The relative timer is now shown in the mode-line while running.
There is a new command to pause and continue it.
Thanks to Alan Davis for driving this change.
The variable `org-blank-before-new-entry' regulates if Org should
insert a blank line before a new entry, when making a new headline or
plain list item. Up to now, the possible values in each case where t
or nil, i.e. unconditionally do or don't insert a blank line.
Now each setting can also be `auto'. If this is the case, Org will
look if the current entry, of which the command creates a sibling,
does have a blank line before it. If yes, it will also make a blank
line. If not, it will not. This seems so useful that I have made
this behavior the default.
Bernt Hansen writes:
I've been bad and let a couple of my overhead tasks slip past
their deadline dates.
*** TODO Q1 Accounting: October
DEADLINE: <2008-11-30 Mon +1y>
- CLOSING NOTE [2008-01-30 Wed 12:18]
This task does not show up on my agenda anymore (probably because
the year changed). If I change the deadline entry to this:
DEADLINE: <2008-11-30 Mon>
then it shows up as 37 days late. I'm bringing this up as soon as
I noticed it just so people are aware of this. I have a few of
these tasks that just dropped off my agenda (probably at the
beginning of the year).
This interesting bug seems only to happen when the repeat is yearly,
and after crossing the December 31st year boundary. It was a sorting
issue - Org-mode (in the function `org-closest-date') computes two
dates that are consistent with the repeater, one before and one after
the target date. When the computation is done with a preference for
the past date (as it happens for deadlines), it should use the earlier
date. In fact, it did choose "n1", assuming that it was the earlier
one. This assumption does hold for daily, weekly and monthly
repeaters, but not for yearly ones.
This commits make sure that "n1" always holds the earlier date, so
that the logic at the end of the function works again.
This commit removes some of the stuff that was specific for the LaTeX
exporter, and falls back to the default configuration that works for
all backends.
Here is what the commit does:
- The variable `org-export-latex-remove-from-headlines' is now
obsolete. Instead, also LaTeX export now responds to the settings
in the variables org-export-with-todo-keywords',
`org-export-with-priority', and `org-export-with-tags' and in the
corresponding OPTION settings.
- Removal of time stamps and related keywords now already happens in
the preprocessor, so that it will be perfectly the same for all
backends.
- The list functions have been extended to accept an additional
parameter list, to overrule the default setting for a particular
list function. This is used to make the checkbox appearance in
LaTeX configurable, through the new variable
`org-export-latex-list-parameters'.
An agenda series can have a set of global options. Matt Lundin
reported that these options to not work completely. There reason was
that, when calling `org-finalize-agenda' for a series, the dynamic
binding of those options was already off again. This commit makes
sure that these bindings are available also during this final step.
When using "C-u C-u M-x org-remember RET" in order to jump to the last
storage location, the code failed to show the matching entry. This
commit makes sure that at least the headline of the last remember note
is made visible.
With the "* Footnotes" heading as last line in the buffer, footnote
insertion did not position new definitions correctly. This commit
fixes the problem.
Reported by Matt Lundin.
This commit adds an option to org-w3m, to decide whether the mark
should be deactivated after copying the region.
New version from author Andy Steward.
This commit add a new face for footnote labels, and activates footnote
labels for mouse clicks and for `C-c C-o', to jump to the
corresponding reference or definition.
This patch introduces more hooks for preprocessing the export buffer,
at various strategic moments. See the Changes.org file for a
description of the hooks.
The remember handler was creating a buffer with `find-file-noselect',
and then trying to find it back using `get-file-buffer'. Apparently
there are situations where this can fail, to we now use directly the
buffer returned by `find-file-noselect'.
In a recent patch we have introduced names for all fields in the last
row. This has lead to a bug, that Org thinks there might be a field
formula associated with those fields. Now we check if there really is
one, and only in this case ask to overwrite it with a column formula.
Report by Henry Atting.
The dynamic block capturing column view has an :id parameter that does
select from where the column view should be captured. The routine
searching for this entry so far only searched the current file, now it
uses the full ID API to find the entry also in another file.
Furthermore, a value "file:path/to/file.org" will capture the global
column view of that file.
Report by Francois Lagarde.
1. When LaTeX export was done with a time-stamped file, a format
error in the timestamp format caused the output file to not
have the % comment in front of the time string. As this line
is early in the file, a LaTeX error would result.
2. Replacement of some special characters could fail. Strangely
this shows up only in XEmacs, but it still is a bug.
Both bugs were reported by Hugh Daschbach.
When refiling to the current file, the completion commands do not show
the file name. This was broken because I had switched from comparing
truenames to normal names. Now I am using expanded names, this is fast
and works well.
After the failed implementation of `@0' as a reference for the last
line, this is a second attempt to provide such references. I would
have liked to allow `@last' as the reference, that would have been
beautiful. However, too many regular expressions directly search for
`@' followed by a number, so this is too hard to implement.
Therefore, I am now turning the last row into a row of implicitly
named fields. From now on, $LR1, $LR2,... can be used to refer to
fields in the last row. These names may also appear on the left hand
side of formulas.
A prefix argument to the `org-agenda-show' command is now interpreted
to make sure the entire entry is made visible in the other window, not
only the headline.
Updating agenda lines did display tags incorrectly, because it used
the list of tags available as a property to remake the list. However,
that list contains down-cased versions of the tags, because all the
filtering in the agenda does ignore case in tags.
This patch implements a fresh scan for the tags each time a line is
updated, and in this way fixes the problem. It also reverses a
previous attempt to fix a similar problem.
Text inside tables did not receive the full treatment of handling sub-
and superscripts, and of special character quoting like %, &, and {}.
This patch does fix this, but I am worried that I am overlooking the
true reason why Bastien did switch off these conversions. We'll see
if and what this will break.
Exporting tables to LaTeX suffered from the problem that Org tables
are often long, but that the tabular environment in LaTeX cannot
handle long tables. This patch fixes this issue.
LaTeX export can now deal with very long tables, by setting an option
in the "ATTR_LaTeX:" line. Also, you can specify the alignment by
hand. Here is an example:
Also, table export now correctly deals with tables that start with a
hline. In such a case, also the LaTeX version will have this extra
hline before the first line.
This patch introduces three improvements to refile target construction,
which should speed these functions up significantly.
1. A faster way to move up a level in the outline hierarchy
2. A better way to construct the outline path, in the case
that the command is scanning the entire hierarchy anyway
3. Avoid comparing the true-names of files.
The last data line in a table is often a line with important data, for
example sums of a column. In tables with varying length, the row
number of this line is constantly changing, which makes it hard to
write programs creating tables and then installing formulas.
This patch introduces @0 as a special reference to the last row, so
that @0$3 would be the field in the last row, 3rd column.
Unique identifiers for entries can now be used more efficiently.
Internally, a hash array has replaced the alist used so far to
keep track of the files in which an ID is defined. This makes it
quite fast to find an entry by ID.
There is now a new link type which looks like this:
id:GLOBALLY-UNIQUE-IDENTIFIER
This link points to a specific entry. When you move the entry to
a different file, for example if you move it to an archive
file, this link will continue to work.
The file /org-id.el/ contains an API that can be used to write
code using these identifiers, including creating IDs and finding
them wherever they are.
Org has its own method to create unique identifiers, but if the
system has /uuidgen/ command installed (Mac's and Linux systems
generally do), it will be used by default. You an also select
the method by hand, using the variable =org-id-method=.
If the ID system ever gets confused about where a certain ID is,
it initiates a global scan of all agenda files with associated
archives, all files previously known containing any IDs, and all
currently visited Org-mode files to rebuild the hash. You can
also initiate this by hand: =M-x org-id-update-id-locations=.
Running this command will also dump into the =*Messages*= buffer
information about any duplicate IDs. These should not exist, but
if you /copy/ an entry with its properties, duplicate IDs will
inevitably be produced. This is unavoidable in a plain text
system that allows you to edit the text in arbitrary ways, and a
portion of care on your side is needed to keep this system clean.
The hash is stored in the file =~/.emacs.d/.org-id-locations=.
This is also a change from previous versions where the file was
=~/.org=id-locations=. Therefore, you can remove this old file
if you have it. I am not sure what will happen if the =.emacs.d=
directory does not exists in your setup, but in modern Emacsen, I
believe it should exist. If you do not want to use IDs across
files, you can avoid the overhead with tracking IDs by
customizing the variable =org-id-track-globally=. IDs can then
still be used for links inside a single file.
IDs will also be used when you create a new link to an Org-mode
buffer. If you use =org-store-link= (normally at =C-c l=) inside
en entry in an Org-mode buffer, and ID property will be created
if it does not exist, and the stored link will be an =id:= link.
If you prefer the much less secure linking to headline text, you
can configure the variable =org-link-to-org-use-id=. The default
setting for this variable is =create-if-interactive=, meaning
that an ID will be created when you store a link interactively,
but not if you happen to be in an Org-mode file while you create
a remember note (which usually has a link to the place where you
were when starting remember).
Tables, and Hyperlinks that represent inlined images, can now be
equipped with additional information that will be used during
export. The information will be taken from the following special
lines in the buffer and apply to the first following table or
link.
- #+CAPTION: :: The caption of the image or table. This string
should be processed according to the export backend, but
this is not yet done.
- #+LABEL: :: A label to identify the figure/table for cross
references. For HTML export, this string will become the
ID for the `<div class="figure">' element that encapsulates
the image tag and the caption. For LaTeX export, this
string will be used as the argument of a `\label{...}'
macro. These lables will be available for internal links
like `[[label][Table] ]'.
- #+ATTR_HTML: :: Attributes for HTML export of image, to be
added as attributes into the `<img...>' tag. This string
will not be processed, so it should have immediately the
right format.
- #+ATTR_LaTeX: :: Attributes for LaTeX export of images, to
be inserted into the optional argument of the
`\includegraphics[...]{file}' command, to specify scaling,
clipping and other options. This string will not be
processed, so it should have immediately the right
format, like `width=5cm,angle=90'
For LaTeX export, if either a caption or a label is given, the
element will be exported as a float, i.e. wrapped into a figure
or table environment.
Xerxes Folupa writes:
> I spotted a little inconsistency in the way Org strips tags when
> processing #+begin_verse ... #+end_verse, and #+begin_quote
> ... #+end_quote blocks, compared with other literal blocks that strip
> superfluous <p> tags correctly (e.g. #+html)
[...]
> Additional question: is the space before the <br/> in verse blocks a
> design decision?
This patch fixes these issues.
Tassilo Horn asked for this, because he finds the default behavior of
silently choosing a different row too confusing. I actually do agree.
The main use of this feature was running averages, if you need this
feature, you can customize the variable
`org-table-error-on-row-ref-crossing-hline'.
Moving trees up or down with XEmacs caused a problem when the tree is
at the beginning if the buffer or narrowed region. This patch
protects the relevant calls to outline-flag-region so that they are
only executed if the range is valid.
Samuel Wales writes:
> It would be really nice if you could set tags to different
> faces the way you can with todo keywords.
>
> For example, you could set :urgent: to a bright color. Or
> set a face for all contexts.
This patch add a new customization variable `org-tag-faces' that can
be used to specify such faces. The rest of the patch implements these
new faces in Org-mode buffers as well as in the agenda.
It seems that CSS and Java-script stuff should be quoted in a very
strange way in order to make sure that the resulting file functions
correct in current browsers *and* validates against various XHTML and
XML standards. To be honest, the quoting technique seem really
strange, but Sebastian Rose argues, that this is the way to handle
this issue.
Gnus uses w3m to wash HTML messages and installs w3m-minor-mode-map in
these buffers. Therefore, this patch makes sure that the special copy
command that converts HTML links to Org-mode links also gets installed
into the minor mode map.
This is as yet untested.
Calling `org-archive-to-archive-sibling' caused problems when used
several times in a row. The new killed subtree would be appended to
the current head of the kill-ring, instead of being pushed there. The
reason for this is that the command `kill-region', which is called by
`org-cut-subtree' changes the variable `this-command', so that during
the next archive command, `kill-region' will think that the previous
command was also a kill and do the append.
Normally this is wanted, to make sure that several kill commands
create one big yank string. But in this case it has to be avoided.
The patch fixes the problem by let-binding (and therefore protecting)
the value of `this-command' around the call to `org-cut-subtree'.
Reported by Bernt Hansen.
Harri Kiiskinen suggested that it might be useful to make the LOCATION
property an inherited property during iCalendar export. In this way
you can have set the LOCATION for a whole set of items by setting it
only in the parent.
While this will slow down iCalendar export for large files, I think it
can be quite useful. This patch does implement the basic code needed
for this functionality. However, you still need to tell Org that
LOCATION should be inherited, by setting org-use-property-inheritance.
If you set it to t, beware that this may trigger a significant
slowdown when creating the match view in the agenda. So it may be
better to set this variable to
(setq org-use-property-inheritance '("LOCATION"))
instead.
This patch improves the internal handling of the large number of
export options that Org-mode has. In particular, it now defines a
single constant, `org-export-plist-vars' that contains the full list
of options, and how these can be accessed through variables, and
through the #+OPTIONS line. Before the patch, there used to be a
separate list or the OPTIONS handling, which has gotten out of sync.
This now no longer can happen.
Also, this patch adds two new variables, `org-export-with-priority',
and `org-export-with-todo-keywords', which can be used to turn the
export of TODO keywords and priority cookies on and off, so that these
can simply disappear and not be shown in the exported file. In fact,
the default for the priority cookie is to remove it.
There were bugs in the mapping API, pointed to by Samuel Wales:
Manual says:
The following example counts the number of entries with TODO keyword
WAITING, in all agenda files.
(length (org-map-entries t "/+WAITING" nil 'agenda))
Org says invalid function for the string.
First of all, the example in the manual was wrong, the "nil" should be
gone. Second, the mapping function did not return all results in a
list, so that `length' could not count them.
This patch fixes these issues.
In addition to "<now>", "<today>", "<yesterday>", and
"<tomorrow>", there are more special values accepted now in
time comparisons in property searches: You may use strings
like =<+3d>= or =<-2w>=, with units d, w, m, and y for day,
week, month, and year, respectively
Thanks to Linday Todd for this proposal.
So far, the only way to select tags for inheritance was to
allow it for all tags, or to do a positive selection using
one of the more complex settings for
`org-use-tag-inheritance'. It may actually be better to
allow inheritance for all but a few tags, which was difficult
to achieve with this methodology.
This patch introduces a new option,
`org-tags-exclude-from-inheritance' which allows to specify an
exclusion list for inherited tags.
This patch does a lot of things. First, it makes sure that the tags
transferred to the agenda as text properties on each line are do carry
information about there origin (in the form of an `inherited' text
property). Then it modifies the function creating agenda lines so
that inherited tags will be listed and identified as such in the
agenda.
This new feature can be turned off with a new variable,
`org-agenda-show-inherited-tags'.
This file implements a special function to copy text from a w3m buffer
in a way that when the text is yanked back into an Org-mode buffer,
the links will be translated to Org syntax.
This key needs special treatment, because it needs to work *outside*
tables. The patch introduces a special command to call the
creation/conversion function if there is no conflicting binding to
`C-c |' outside of orgtbl-mode.
S-SPC did lead to an error in orgtbl-mode, because there is no binding
to this key. Now orgtbl-self-insert-command falls back on calling
self-insert-command for such cases.
This cleans up the implementation of the timer. Most important change
is that, after starting a time list with `C-c C-x -', you can then
simply use M-RET to add new items, which is addictive!
This patch implements a relative time for taking timed notes, useful
for example while watching a video, or during a meeting which is also
recorded. Here are the new commands:
- `C-c C-x .' ::
Insert a relative time into the buffer. The first time
you use this, the timer will be started. When called
with a prefix argument, the timer is reset to 0.
- `C-c C-x -' ::
Insert a description list item with the current relative
time. With a prefix argument, first reset the timer to 0.
- `C-c C-x 0' ::
Reset the timer without inserting anything into the buffer.
By default, the timer is reset to 0. When called with a
`C-u' prefix, reset the timer to specific starting
offset. The user is prompted for the offset, with a
default taken from a timer string at point, if any, So this
can be used to restart taking notes after a break in the
process. When called with a double prefix argument
`C-c C-u', change all timer strings in the active
region by a certain amount. This can be used to fix timer
strings if the timer was not started at exactly the right
moment.
When starting the publishing process with
`org-publish-current-project' from a file that is located in a project
that is also a component of a parent project, this patch now makes
sure that the entire parent project is published instead.
The creation of an automatic site map in org-publish with the
:auto-index and :index-filename parameter does exclude the index
file name from being added to the index. There was a bug which would
exclude this file name also in all subdirectories in a project. This
patch switches the comparison from looking at file names only to
looking at the complete path.
RET did fail in orgtbl-mode, if the cursor was at the beginning of the
buffer. Now it opens a new line whenever the cursor is at the
beginning of a line, and that includes the beginning of the buffer.....
Org-mode still has a few operations that do not work well when the
first line of a buffer is a headline. One was constructing the clock
table, but this one is eliminated by this patch.
When the export skips the text before the first headline, we now
include the comment line before the first headline, if any.
This makes sure that we can specify an anchor for this headline.
"\\" at the end of a line marks forces line breaks for HTML and LaTeX
export. ASCII export does preserve lines anyway, but these line break
indicators might still be present and need to be removed.
Reported by Rustom Mody.
This patch introduces a new variable,
`org-list-two-spaces-after-bullet-regexp'. It can be a regular
expression matching plain list bullets. When it matches, changing the
bullet type will introduce two spaces instead of one after each
bullet.
For example,
(setq org-list-two-spaces-after-bullet-regexp "[.)]")
will make two spaces after "1." and "1)".
This patch compacts the persistence code. It also make sure that no
variables outside Org's name space are created. Finally, it makes
sure that the resumed clock is not hidden after a restart of Emacs.
Saving the clock history and the running clock could lead to pointers
to non-existing buffer, or to dired buffers of directories. This
patch implements more consistency checks.
It also allows a new value for `org-clock-persist'. When this is
`clock', only the running clock, but not the entire clock history
is saved.
Commands that modify the bullet style of a plain list, or that
renumber such a list may lead to changes in the width of a bullet.
The indentation of the lines below such a bullet is now automatically
adapted.
Also fixes a bug in bullet style cycling.
This patch defines a new minor mode, `org-remember-mode', which is
turned on when Org-mode is used to handle a remember buffer. This
provides a safe way to modify keybindings (in
`org-remember-mode-map'), without overwriting keys in `org-mode-map'.
Since Org put remember buffers into Org-mode, remember-mode-map will
be entirely ignored.
do completion does not work well with values including white space,
which means we cannot use it in completion of values in remember
templates. This patch turns it off for this application.
Report by Richard Riley.
When ID's are created, Org tries to remember in which file the id is
located. However, if an ID is created in a remember buffer, no file
is known. This patch makes sure that this condition does not lead to
an error.
When an org-remember template inserts a property, the template-creating
function tries to support the user by retrieving a list of allowed
values to facilitate completion. So far this was done by getting the
property with inheritance, ignoring that the cursor in the target file
buffer may not be in an entry at all. So now we just look at the global
and file lists of allowed values.
Reported by James TD Smith.
Michael Ekstrand wrote:
I've been trying to work with links to man pages in
Org (using org-man.el). When I try to create a link to a
Perl module in the File package namespace, however,
`org-insert-link' tries to do its same-file link detection
and winds up breaking the link. The result is that the link
man:File::MimeInfo
gets rewritten to
file::MimeInfo
Naturally, this isn't what I want. Looking at
`org-insert-link', it seems that the problem may be that its
same-file link detection is matching 'file:' at
beginning-of-word, which it is in this case. In the general
case for which 'file:' detection is being used, is there a
reason to match against `\<' rather than `^' or
`^[[:space:]]*'? Changing to one of the latter two
expressions would, I believe, keep it From rewriting these
links I am trying to create.
Michael is right, and I have made this change.
The face `org-agenda-column-dateline' can be used to make datelines
with summaries look different from other column view lines.
Requested by George Pearson.
A link to an image can function as the description part of a link, to
create a clickable image. The corresponding image tag was
erroneously processed like normal text. This patch protects such
descriptions from processing.
Reported by Richard Riley.
If you set the variable `org-completion-use-ido' to t, and if you have
ido-mode turned on, most instanced of completion in Org-mode will use
ido-complete.
Thanks to Samuel Wales and Eric Schulte for patches to this effect.
There was a bug in the implementation of the "<today>" tag for time
comparison during property matching, and new tags "<yesterday>" and
"<tomorrow>" have been introduced.
Patch by Piotr Zielinski.
Org allows to define invisible anchors in a document in comment lines
like
If such a line is directly before or after a headline, previously this
anchor was removed, and all references to it were replaced with
references to the anchor that the headline had anyway.
Matthew Lundin pointed out that this makes it impossible to have
permanent links to headlines that can also be used from outside the
current page.
This patch changes his situation by adding the additional targets as
empty anchors to the section heading. If works by creating, during
preprocessing, an alist with targets that do have aliases. During
publishing, these aliases are looked up and converted into anchors.
In LaTeX export, these additional targets become additional labels.
The was a faulty regular expression in this function which never
matched, causing creation of a new picture area to mess up and start
the new area at the end of the previous line instead of the beginning
of the current.
Reported by Bernt Hansen.
This is a bugfix. When the number of headline levels was set to zero,
or if there was no heading at all in the export, the final closing
</div> should not be present.
This patch implements the possibility to translate links.
It can be useful if use both planner and Org-mode, if you sometimes
copy text from one side to the other and you do not want to worry
about link syntax. This patch allows links created with planner to
function correctly in Org-mode. I would probably be simple to
implement the reverse conversion in planner as well.
This patch is a first shot at this functionality and very likely can
be improved.
Org's `org-yank' now identifies itself as being `yank' by setting
`this-command', and by making sure that the mark is set correctly. In
this way, `yank-pop' will work correctly after using `C-y' in an
Org-mode buffer. Org-mode does not have its own implementation, to
`yank-pop' will insert content plainly, without adjusting tree levels,
and without folding.
Samuel Wales pointed out that `yank-pop' doe not work anymore.
iCalendar export has now improved compliance with RFC 2445.
Now all occurrences in data fields of the double quotes are replaced
by two single quotes, and any fields containing comma, colon, or
semicolon are quoted by surrounding them with double quotes.
Org sometimes hits a "Before first heading" error. This error happens
when `outline-back-to-heading' is called before the first heading in a
buffer. In normal use, this is something easy to fix, because of
course you know where you are and you can identify the problem.
However, when Org scans many different buffers, for example to collect
agenda entries, you may not be able to tell easily where this error
happened. This patch introduces a wrapper around
`outline-back-to-heading', with improving the error message by
spelling out buffer and location.
Georg C.F. Greve asked for configurable leaders strings for agenda
display of time ranges. This patch implements these strings, in the
new option `org-agenda-timerange-leaders'.
When an ASCII image is edited with C-c ', it will in the end be quoted
by prepending colons to each line. If tabulators are used in the
image, this may mess up the alignment. Since tabulators are not a
good idea in ASCII images anyway, this patch makes sure that any
tabulators are replaced by spaces.
Org-mode's `org-yank' command is used as a replacement for the normal
`yank' command. It differs by giving special treatment to subtrees or
sets of subtrees when yanking them, by adjusting the level to fit the
outline, and by folding the trees after the yank.
This patch does fine-tune this behavior.
First of all, if any prefix argument is given to the command, it
immediately hands over the action to the standard `yank' command. In
particular, you can use `C-u C-y' to yank as-is, with the only minor
side effect that the cursor will end up at the beginning of the yanked
text.
Secondly, the folding of the yanked trees will only happen if there is
no text directly after the insertion point that would be swallowed by
the folding process. This was confusing in the past and is much
better now, with a message announcing that folding has been
suppressed.
Bernt Hanses writes:
This changes the default value for Effort during agenda filtering so
that an undefined Effort value is treated as 0 instead of nil. Tasks
with no effort defined now return zero effort when selecting tasks for
the filter.
There was effectively no way to select 'tasks with no effort defined'
using the agenda effort filter. The '<' operator is interpreted as
'<=' and the default effort selection defined in
org-agenda-filter-by-tag starts with zero ("0 0:10 ...") so this
change just treats tasks with no effort defined the same as tasks with
an effort of 0.
This allows fast selection of NEXT tasks with no effort defined.
Column view with follow-mode active in the agenda is great for quickly
filling in the agenda estimated effort values for tasks. Just display
your Next tasks, then / 0 to select tasks with no effort and enter
column mode (C-c C-x C-c) and fill in your effort values with the
quick keys (0-9) for all of the tasks that have blanks in the effort
column.
The refile command allows to move a subtree to under some other
heading, in the current file or even in a different file.
Sometimes one has a number of sibling subtrees that should all be
refiled to the same location. This patch implements a simplification
for this process. You can mark the region of subtrees (using
transient-mark-mode in required for this) and then move them all with
a single command.
Org-mode produces summaries of clocked items in the form of Org-mode
tables. This patch implements the possibility to define formulas that
should be applied to the clock tables, in order to do additional
analysis.
Formulas for clock tables are supported in two ways.
First, a formula can simply be added by hand to a table. Part of this
patch makes sure that, when the previous version of the table contains
a #+TBLFM: line, it will be copied to the new version.
Secondly, the clocktable definition allows a new parameter
`:formula'. The string value of this parameter will be installed as
the formula line for the table. If a formula parameter is given, it
will overrule any previous formula line.
As a special case, using the symbol `%' as the formula will install a
formula that will compute the fraction of total time that was spent in
a subtree.
In both cases, the formulas will be immediately evaluated after the
table has been created.
Bernt Hansen recently reported that occasionally he got a newline
included with property values returned by `org-entry-get'. While the
reason for this is not understood (maybe some dark mingling with
character syntax), these new regexps are explicit about what they
interpret as a non-white character and therefore should make this
matching safer.
Jurgen Defume asked for a way to display only logging information in
the agenda. This patch implements such a possibility. It works by
calling `org-agenda-log-mode' (bound to `l' in the agenda) with a
double prefix arg. This sets the variable `org-agenda-show-log' to a
special value `only' which is then interpreted by the agenda-creating
functions.
When org-yank inserts a subtree, it moves the cursor to the headline
after the yank. A structural bug in the `org-yank' function did cause
this motion also to happen after a normal yank. Fixed now.
Matthew Lovell found that VM messages are only displayed reliably upon
following a link, when the function `vm-preview-current-message' is
called instead of `vm-beginning-of-message'. This patch implements
this change.
Links in the standard form [[link][description]] are allowed to have
brackets in them when these are escapes %5B and %5D. Creating links
through the Org link interface automatically does this conversion.
However, as noticed by Paul R, there is a bug when actually following
such links, when the link will be cut off at the first closing bracket
in the link.
This patch fixes this problem by adjusting the appropriate regexp.
This patch introduces two new functions in org-attach.el,
`org-attach-expand', and `org-attach-expand-link'. Both take a file
name as an argument, assume that this file is an attachment of the
current entry, and return the full path to this file or a
"file:..." link to it, respectively.
With these functions, it becomes very easy to use link abbreviations
to create a new link type to attachments:
After
(setq org-link-abbrev-alist '(("att" . org-attach-expand-link)))
links like [[att:file.txt]] will work.
Org records (depending on setup) various information about progress
achieved with projects and tasks. It can record when an item is done
(when it is "closed"), it can record time spent working on these
entries (clocking), and it can record state changes.
In the daily/weekly agenda, turning on logbook mode with the `l' key
will lists the tasks closed or clocked on a day.
This patch implements showing recorded state changes in the agenda
logbook. By default, showing state changes is not turned on. But you
can configure the new variable `org-agenda-log-mode-items' to trigger
inclusion of state changes. An alternative way is to press `C-u l' in
the agenda, to temporarily force inclusion of all possible entries
(closed, clock, state) into the agenda display.
In passing, this patch renames the function `org-agenda-get-closed' to
the now more appropriate `org-agenda-get-progress'. The old name
continues to be available as an alias, but its use is deprecated.
Org-mode uses a special setup with a number of different customization
variables to specify how a file should be opened when following a
:file:..." link with `C-c C-o'. By using a `C-u' prefix, it was
possible to overrule the customized setup and to force opening the
file in Emacs.
Samuel Wales requested to amend this process, so that a double prefix
argument would do the opposite: force opening the application *outside*
of Emacs, using a system default application. This is what this patch
implements.
Internally this works through a new entry in system specific constants
`org-file-apps-defaults-gnu', org-file-apps-defaults-macosx', and
`org-file-apps-defaults-windowsnt'. The new entry has the car
`system' and specifies the command that should be used for the double
C-u calls. As before, the user option `org-file-apps' can overrule
these default settings.
Note that all this only applies to following "file:" links, and does
not make a difference for, for example, "http:" links.
This is a bug fix. When the option `org-link-file-path-type' has the
value `adaptive', absolute file names would not be abbreviated if they
are relative to the users home directory. For any other values of
this variable except `noabbrev', absolute links are in fact
abbreviated, so the previous behavior is an inconsistency,
as noticed by Matt Lundin.
This patch fixes this problem and makes sure that also in this case,
file names are abbreviated.
Finally, the patch also fixes a structural bug that would ignore
the double C-u prefix if it was given.
When the cursor is at the end of the buffer but not at the beginning
of a line, inserting a new headline with C-RET did insert the stars
into the last line, without adding the needed newline. The new line
is now added.
Link descriptions where so far exported literally. However, really
they need to escape special characters and have TeX-like macros
interpreted and emphasis enabled just like any other text.
This patch makes sure link descriptions are passed through a new
filter, `org-export-html-format-desc' which does just that.
This fix is a follow-up to a report by Sebastian Rose.
So far, Org used either `fit-window-to-buffer' or
`shrink-window-if-larger-than-buffer' without any further checks when
displaying one of its many help and selection buffers. This can cause
problems if the user has set up Emacs to split windows horizontally
rather than vertically, because the window being shrunken then may be
side-by-side with another window, and shrinking the height of one will
also change the other.
With this patch, shrinking a window always goes through the new
function `org-fit-window-to-buffer' which only acts if the current
window spans the whole width of the frame.
Furthermore, this function also helps with compatibility, because it
falls back to `shrink-window-if-larger-than-buffer' if
`fit-window-to-buffer' does not exist, as is the case on older version
of Emacs and XEmacs.
field (or in any other attribute value) must be written as "&" in
order to be valid XHMTL. This patch implements a new filter function
through which every href value is passed, and which enforces this
standard.
This is was triggered by a report by Sebastian Rose.
When marking a repeated entry DONE in the daily or weekly agenda, that
task would previously still be shown as TODO, because the repeater
immediately restores the TODO state after moving the time stamp. This
is bad feedback.
This problem was hard to fix. Because the same line may be present in
other lines in the same weekly agenda, we cannot simply update all
lines related to this entry.
What we do now is this: Before the repeater does its work in shifting
the time stamp and resetting the TODO keyword, we take a snapshot of
the headline as it looks then. And then, when we update the agenda
view, we change only the line at the cursor instead of all lines
related to this entry. We also make sure that this is only so if the
cursor is in a daily/weekly agenda, on TODAY's date.
There still remain possible inconsistencies. For example, if you have
a daily repeating task in the weekly agenda, and you move the cursor a
few days into the future and mark it DONE there, the entry will
actually be marked DONE for today, but still show up in today's task
list as TODO. refreshing the agenda will fix the display in such an
unlikely case.
Thanks to Jack ??? for noticing and reporting this issue.
The index generation of org-publish does briefly visit all files in
order to extract the correct page title. Visiting is necessary,
because the title may be set by the first line in the buffer, by a
Before this patch, this would cause the generation of a large number
of buffers, one for each file mentioned in the index. This patch
arranges for these buffers to be removed again. However, buffers
which were already present will not be removed.
There is still one open problem: The files to be published are
visited twice, one for publishing them, a second time for creating the
index. Visiting causes some overhead, and we would like to limit this
overhead. For now, however, this is not done.
Org-mode does sometimes included CSS definitions directly
into an exported XHTML file. To pass validation tests
for XHTML, these sections need to be wrapped in
order to pass as CDATA, not PCDATA. This patch
(written by Sebastian Rose) does implement this change.
It also fixes some typos.
This function only does its job if no side-by-side
window would be affected as well. Also, if
fit-window-to-buffer is not defined, use
shrink-window-if-larger-than-buffer instead.
When yanking a cut/copied subtree or a series of trees, even
the nomal yank key `C-y' does now adjust the level of the tree
to make it fit into the current outline position, without
loosing its identity, and without swallowing other subtrees.
This uses the command `org-past-subtree'. An additional
change in that command has been implemented: Normally, this
command picks the right outline level from the surrounding
*visible* headlines, and uses the smaller on. So it the
cursor is between a level 4 and a level 3 headline, the tree
will be pasted as level 3. Now, if the cursor is actually
*at* the beginning of a headline, the level of that headline
will be used. So lets say you have a tree like this:
* Level one
** Level two
(1)
(2)* Level one again
with (1) and (2) indicating possible cursor positions for the
insertion. When at (1), the tree will be pasted as level 2.
When at (2), it will be pasted as level 1.
If you do not like `C-y' to behave like this, configure the
variable `org-yank-adjusted-subtrees'.
Thanks to Samuel Wales for this idea and a partial implementation.
Clock-related data are saved when exiting emacs ands restored when emacs
is restarted. The data saved include the contents of `org-clock-history',
and the running clock, if there is one.
To use this, you will need to add
(require 'org-clock)
(org-clock-persistence-insinuate)
to your .emacs and either add
(setq org-clock-persist t)
(setq org-clock-in-resume t)
or set those options to t in custom.
This patch requires the clock resume patch.
Add missing blank line to changelog
Allow org-clock-in-switch-to-state to be a function. This lets you have
different clocked in states for different TODO keyword sets, for example
(defun ahkt-clock-state (state)
(cond ((string= state "TOREAD") "READING")
((string= state "TOWATCH") "WATCHING")
(t state)))
Also fix indentation on clock lines, and empty clock drawers when they are
inserted.
(Okay, I always forget that C-x v v in Emacs does only
commit on a file per file basis. I should really use
the command line when committing several files.)
Carsten Dominik
Tassilo Horn
James TD Smith
Bastien Guerry