Of course, an updated patch is attached.
Best -- Eric
Carsten Dominik <carsten.dominik@gmail.com> writes:
> Hi Eric,
>
> I tried to apply the patch, but it does not apply cleanly, maybe due
> to other changes. Can I ask you to update and resubmit?
>
> Thanks!
>
> - Carsten
>
> On Jun 21, 2010, at 6:37 PM, Eric Schulte wrote:
>
>> Hi Robert,
>>
>> Thanks for the thoughtful message.
>>
>> I present a couple of solutions below.
>>
>> Robert Cunningham <robut@iinet.net.au> writes:
>>
>>> G'day All,
>>>
>>> I wonder if I've missed something and there is a better way.
>>>
>>> Essentially I'm trying to use org babel with R and LaTeX to create
>>> figures
>>> with both long and short captions (for contents)
>>>
>>> I'd started with:
>>>
>>> #+CAPTION: Nice data (filled points indicate less nice data)
>>> #+LABEL: fig:nicedata
>>> #+ATTR_LaTeX: width=0.98\textwidth
>>> #+begin_src R :file ndata.pdf :width 1000 :height 617 :exports
>>> results
>>> dotchart(data$ndata)
>>> #+end_src
>>>
>>> which pointed to the need for long/short captions...
>>>
>>> feeling hopeful I tried:
>>>
>>> #+CAPTION: Nice data [Nice data (filled points indicate less nice
>>> data)]
>>> #+LABEL: fig:nicedata
>>> #+ATTR_LaTeX: width=0.98\textwidth
>>> #+begin_src R :file ndata.pdf :width 1000 :height 617 :exports
>>> results
>>> dotchart(data$ndata)
>>> #+end_src
>>>
>>
>> I'm attaching a patch [1] which adds shortname support for captions.
>> Once
>> applied, the following syntax will result in a caption with a
>> shortname
>> and a longname.
>>
>> --8<---------------cut here---------------start------------->8---
>> some pre-table text
>>
>> #+source: g-nicedata
>> #+begin_src gnuplot :file graph.png :exports results
>> plot sin(x)
>> #+end_src
>>
>> #+Caption: [nice data]{a longer description of the niceness of the
>> data}
>> #+results: g-nicedata
>> [[file:graph.png]]
>>
>> some post-table text
>> --8<---------------cut here---------------end--------------->8---
>>
>> however, while this patch is still pending there is an Org-babel
>> solution below which should work immediately.
>>
>>>
>>>
>>> but no luck there.
>>>
>>> Next effort was to try to use R and LaTex more directly with
>>> noweb. I tried
>>> this:
>>>
>>>
>>>
>>> #+srcname: r-nicedata
>>> #+begin_src R :session :file ndata.pdf :results output :exports
>>> results
>>> dotchart(data$ndata)
>>> #+end_src
>>>
>>>
>>> #+begin_src latex :noweb yes
>>> \begin{figure}[htb!]
>>> \centering
>>> \includegraphics[width=0.98\textwidth]{<<r-nicedata()>>}
>>> \caption[Nice data]{Nice data (filled points indicate less nice
>>> data)}
>>> \label{fig:nicedata}
>>> \end{figure}
>>> #+end_src
>>>
>>>
>>>
>>> This does produce the figure and long/short contents BUT ALSO
>>> produces this:
>>>
>>> #+results: r-nicedata
>>> [[file:ndata.pdf]]
>>>
>>> which upon export results in a link and consequently the plot
>>> appearing both
>>> in the figure and elsewhere. This second plot is unwelcome.
>>>
>>> I've tried assorted :results and :output options but have not found
>>> how to
>>> suppress the #+results: but still obtain the figure. I've always used
>>> the :session option.
>>>
>>> I've also tried twigging an org-export option to suppress pdf
>>> export but the
>>> link is still exported so that is not a solution.
>>>
>>> The current "working" solution is to use the noweb approach and
>>> then use sed
>>> to clean out the links to the second image-ugly to say the least!
>>>
>>
>> You were very close with the noweb approach. The following
>> combination
>> should work -- notice the ":results silent" header argument to the
>> source block.
>>
>> --8<---------------cut here---------------start------------->8---
>> some pre-table text
>>
>> #+source: g-nicedata
>> #+begin_src gnuplot :file graph.png :results silent :exports none
>> plot sin(x)
>> #+end_src
>>
>> #+begin_src latex :noweb yes
>> \begin{figure}[htb!]
>> \centering
>> \includegraphics[width=0.98\textwidth]{<<g-nicedata()>>}
>> \caption[Nice data]{some nice data -- filled points indicate less
>> nice data}
>> \label{fig:nicedata}
>> \end{figure}
>> #+end_src
>>
>> some post-table text
>> --8<---------------cut here---------------end--------------->8---
>>
>> is exported to the following latex,
>>
>> --8<---------------cut here---------------start------------->8---
>> some pre-table text
>>
>>
>>
>> \begin{figure}[htb!]
>> \centering
>> \includegraphics[width=0.98\textwidth]{graph.png}
>> \caption[Nice data]{some nice data -- filled points indicate less
>> nice data}
>> \label{fig:nicedata}
>> \end{figure}
>>
>> some post-table text
>> --8<---------------cut here---------------end--------------->8---
>>
>> Hope this helps,
>>
>> Best -- Eric
>>
>>>
>>>
>>>
>>> All this with org version 6.36c
>>>
>>>
>>> What have I missed? What is the best way to do this?
>>>
>>>
>>> Cheers,
>>>
>>> Robert Cunningham
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Please use `Reply All' to send replies to the list.
>>> Emacs-orgmode@gnu.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>> Footnotes:
>> [1] From 6a55dcab99bbd7840117b8390ab5db347d2573ef Mon Sep 17
>> 00:00:00 2001
>> From: Eric Schulte <schulte.eric@gmail.com>
>> Date: Mon, 21 Jun 2010 09:02:37 -0700
>> Subject: [PATCH] add short-names to #+captions with support for
>> latex export
>>
>> captions specified with the following syntax
>> #+CAPTION: [shortname]{longname}
>> will have their short and longnames handled appropriately.
>>
>> Thanks to Robert Cunningham for suggesting this feature.
>>
>> * lisp/org-exp.el (org-export-attach-captions-and-attributes): adding
>> a shortname attribute to caption strings under the symbol name
>> org-caption-shortn.
>>
>> * lisp/org-latex.el (org-export-latex-tables): handling caption short
>> names on table export
>>
>> (org-export-latex-convert-table.el-table): handling caption short
>> names on table.el type table export
>>
>> (org-export-latex-links): handling caption short names on link/image
>> export
>>
>> (org-export-latex-format-image): now takes an optional argument
>> specifying a caption short name
>> ---
>> lisp/org-exp.el | 14 +++++++++-----
>> lisp/org-latex.el | 21 ++++++++++++++-------
>> 2 files changed, 23 insertions(+), 12 deletions(-)
>>
>> diff --git a/lisp/org-exp.el b/lisp/org-exp.el
>> index 029e4d7..466d7da 100644
>> --- a/lisp/org-exp.el
>> +++ b/lisp/org-exp.el
>> @@ -1256,7 +1256,7 @@ the current file."
>> (goto-char (point-min))
>> (while (re-search-forward org-bracket-link-regexp nil t)
>> (org-if-unprotected-at (1+ (match-beginning 0))
>> - (let* ((md (match-data))
>> + (let* ((md (match-data))
>> (desc (match-end 2))
>> (link (org-link-unescape (match-string 1)))
>> (slink (org-solidify-link-text link))
>> @@ -1381,8 +1381,8 @@ removed as well."
>> select-tags "\\|")
>> "\\):"))
>> (re-excl (concat ":\\(" (mapconcat 'regexp-quote
>> - exclude-tags "\\|")
>> - "\\):"))
>> + exclude-tags "\\|")
>> + "\\):"))
>> beg end cont)
>> (goto-char (point-min))
>> (when (and select-tags
>> @@ -1593,11 +1593,14 @@ table line. If it is a link, add it to the
>> line containing the link."
>> "^[ \t]*\\(|[^-]\\)"
>> "\\|"
>> "^[ \t]*\\[\\[.*\\]\\][ \t]*$"))
>> - cap attr label end)
>> + cap shortn attr label end)
>> (while (re-search-forward re nil t)
>> (cond
>> ((match-end 1)
>> - (setq cap (concat cap (if cap " " "") (org-trim (match-string 1)))))
>> + (setq cap (concat cap (if cap " " "") (org-trim (match-string 1))))
>> + (when (string-match "\\[\\(.*\\)\\]{\\(.*\\)}" cap)
>> + (setq shortn (match-string 1 cap)
>> + cap (match-string 2 cap))))
>> ((match-end 2)
>> (setq attr (concat attr (if attr " " "") (org-trim
>> (match-string 2)))))
>> ((match-end 3)
>> @@ -1609,6 +1612,7 @@ table line. If it is a link, add it to the
>> line containing the link."
>> (point-at-eol)))
>> (add-text-properties (point-at-bol) end
>> (list 'org-caption cap
>> + 'org-caption-shortn shortn
>> 'org-attributes attr
>> 'org-label label))
>> (if label (push (cons label label) target-alist))
>> diff --git a/lisp/org-latex.el b/lisp/org-latex.el
>> index 01a4b05..6c2aab2 100644
>> --- a/lisp/org-latex.el
>> +++ b/lisp/org-latex.el
>> @@ -1576,7 +1576,7 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (org-table-last-column-widths (copy-sequence
>> org-table-last-column-
>> widths))
>> fnum fields line lines olines gr colgropen line-fmt align
>> - caption label attr floatp longtblp)
>> + caption shortn label attr floatp longtblp)
>> (if org-export-latex-tables-verbatim
>> (let* ((tbl (concat "\\begin{verbatim}\n" raw-table
>> "\\end{verbatim}\n")))
>> @@ -1585,6 +1585,8 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (progn
>> (setq caption (org-find-text-property-in-string
>> 'org-caption raw-table)
>> + shortn (org-find-text-property-in-string
>> + 'org-caption-shortn raw-table)
>> attr (org-find-text-property-in-string
>> 'org-attributes raw-table)
>> label (org-find-text-property-in-string
>> @@ -1652,7 +1654,8 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (if floatp "\\begin{table}[htb]\n"))
>> (if floatp
>> (format
>> - "\\caption{%s%s}"
>> + "\\caption%s{%s%s}"
>> + (if shortn (concat "[" shortn "]") "")
>> (if label (concat "\\\label{" label
>> "}") "")
>> (or caption "")))
>> (if (and longtblp caption) "\\\\\n" "\n")
>> @@ -1680,10 +1683,11 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>>
>> (defun org-export-latex-convert-table.el-table ()
>> "Replace table.el table at point with LaTeX code."
>> - (let (tbl caption label line floatp attr align rmlines)
>> + (let (tbl caption shortn label line floatp attr align rmlines)
>> (setq line (buffer-substring (point-at-bol) (point-at-eol))
>> label (org-get-text-property-any 0 'org-label line)
>> caption (org-get-text-property-any 0 'org-caption line)
>> + shortn (org-get-text-property-any 0 'org-caption-shortn line)
>> attr (org-get-text-property-any 0 'org-attributes line)
>> align (and attr (stringp attr)
>> (string-match "\\<align=\\([^ \t\n\r,]+\\)" attr)
>> @@ -1721,7 +1725,8 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (setq tbl (concat "\\begin{center}\n" tbl "\\end{center}")))
>> (when floatp
>> (setq tbl (concat "\\begin{table}\n"
>> - (format "\\caption{%s%s}\n"
>> + (format "\\caption%s{%s%s}\n"
>> + (if shortn (format "[%s]" shortn) "")
>> (if label (format "\\label{%s}" label) "")
>> (or caption ""))
>> tbl
>> @@ -1822,6 +1827,7 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> "file")))
>> (coderefp (equal type "coderef"))
>> (caption (org-find-text-property-in-string 'org-caption
>> raw-
>> path))
>> + (shortn (org-find-text-property-in-string
>> org-caption-shortn raw-path))
>> (attr (or (org-find-text-property-in-string
>> org-attributes raw-
>> path)
>> (plist-get org-export-latex-options-plist
>> :latex-image-
>> options)))
>> (label (org-find-text-property-in-string 'org-label raw-path))
>> @@ -1859,7 +1865,7 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (plist-get org-export-latex-options-plist :inline-images))
>> ;; OK, we need to inline an image
>> (insert
>> - (org-export-latex-format-image raw-path caption label attr)))
>> + (org-export-latex-format-image raw-path caption label
>> attr shortn)))
>> (coderefp
>> (insert (format
>> (org-export-get-coderef-format path desc)
>> @@ -1889,7 +1895,7 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (t (insert "\\texttt{" desc "}")))))))
>>
>>
>> -(defun org-export-latex-format-image (path caption label attr)
>> +(defun org-export-latex-format-image (path caption label attr
>> &optional shortn)
>> "Format the image element, depending on user settings."
>> (let (ind floatp wrapp multicolumnp placement figenv)
>> (setq floatp (or caption label))
>> @@ -1932,7 +1938,7 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (floatp "\\begin{figure}%placement
>> \\centering
>> \\includegraphics[%attr]{%path}
>> -\\caption{%labelcmd%caption}
>> +\\caption%shortn{%labelcmd%caption}
>> \\end{figure}")
>> (t "\\includegraphics[%attr]{%path}")))
>>
>> @@ -1953,6 +1959,7 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (expand-file-name path)
>> path))
>> (cons "attr" attr)
>> + (cons "shortn" (if shortn (format "[%s]" shortn) ""))
>> (cons "labelcmd" (if label (format "\\label{%s}"
>> label)""))
>> (cons "caption" (or caption ""))
>> --
>> 1.7.0.4
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Please use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
> - Carsten
>From 5cbb38e25a2d2eae7c3c688d347f80619ecb8463 Mon Sep 17 00:00:00 2001
From: Eric Schulte <schulte.eric@gmail.com>
Date: Thu, 1 Jul 2010 08:07:17 -0700
Subject: [PATCH] add short-names to #+captions with support for latex export
captions specified with the following syntax
#+CAPTION: [shortname]{longname}
will have their short and longnames handled appropriately.
Thanks to Robert Cunningham for suggesting this feature.
* lisp/org-exp.el (org-export-attach-captions-and-attributes): adding
a shortname attribute to caption strings under the symbol name
org-caption-shortn.
* lisp/org-latex.el (org-export-latex-tables): handling caption short
names on table export
(org-export-latex-convert-table.el-table): handling caption short
names on table.el type table export
(org-export-latex-links): handling caption short names on link/image
export
(org-export-latex-format-image): now takes an optional argument
specifying a caption short name
* lisp/org.el (org-switchb): Renamed from `org-iswitchb'. Improve
docstring.
(org-iswitchb): New alias.
(org-ido-switchb): Make alias point to `org-switchb'.
* lisp/org-capture.el (org-capture-fill-template): Respect
time-of-day preference in template prompt.
In an interactive time prompt in a capture template, the users
preference of getting a stamp with time was not respected.
Reported by Markus Heller
* lisp/babel/langs/ob-python.el (org-babel-python-buffers):
technically this should be initialized as an alist, although in
practice this doesn't really make any functional difference because
whenever this variable is used it has new values properly assigned
to it, and it is supposed to start basically empty.
This patch removes an obsolete declaration and call of the function
`org-publish-initialize-files-alist' from org-protocol.el.
This function does not exist anymore. It was removed when we
implemented the new publishing cache.
Best wishes
Sebastian
* org-feed.el (org-feed-unescape): New function. Unescape
protected entities.
(org-feed-parse-atom-entry): Use function for atom:content
type text and html.
* lisp/org.el (org-time-string-to-absolute): Ignore cyclic repeater
when displaying items on todays agenda date.
Ignore the cyclic repeater when displaying items on today's agenda
date. If you have a weekly task and miss the date the agenda view
will show more than a week late now instead of resetting on the
cyclic repeating date. This makes it much more obvious when you
missed a repeating task after the repeater.
* lisp/org-agenda.el (org-agenda-get-progress): Avoid reusing previous
value of EXTRA.
Sebastien Vauban writes:
> Finally reporting the following bug. Has been there for as long as I can
> remember, but never did report it when seeing it. And kept forgetting.
>
> So, now...
>
> --8<---------------cut here---------------start------------->8---
> * 2010
>
> ** 2010-06 June
>
> *** Admin
>
> **** Organization
> :LOGBOOK:
> CLOCK: [2010-06-30 Wed 13:30]--[2010-06-30 Wed 17:50] => 4:20
> - DUPLICATED TeXt.
> :END:
>
> **** Emails and News
> :LOGBOOK:
> CLOCK: [2010-06-28 Mon 09:10]--[2010-06-28 Mon 10:40] => 1:30
> CLOCK: [2010-06-30 Wed 10:30]--[2010-06-30 Wed 12:30] => 2:00
> :END:
>
> *** ABC
> :LOGBOOK:
> CLOCK: [2010-06-30 Wed 09:30]--[2010-06-30 Wed 10:30] => 1:00
> - Transfer of files to ABC.
> :END:
> --8<---------------cut here---------------end--------------->8---
>
> generates the following timeline:
>
> --8<---------------cut here---------------start------------->8---
> Timeline of file /home/sva/Projects/ecm.org
>
> 2010-06-28 Mon _________________________________
> Clocked: (1:30) Emails and News
>
> 2010-06-29 Tue _________________________________
>
> 2010-06-30 Wed _________________________________
> Clocked: (1:00) ABC - Transfer of files to ABC.
> Clocked: (2:00) Emails and News - DUPLICATED TeXt.
> Clocked: (4:20) Organization - DUPLICATED TeXt.
> --8<---------------cut here---------------end--------------->8---
>
> As you can see, the fact that I never put a descriptive text for "reading
> emails" is wrongly reported: previous text is used in the timeline, instead.
* lisp/org-html.el (org-export-html-preprocess): Call org-format-latex,
possibly with a protect-only argument.
* lisp/org.el (org-format-latex): New argument PROTECT-ONLY.
with the switch #+OPTIONS: LaTeX:verbatim ,
LaTeX code will be exported verbatim to HTML, so that jsmath can grab
and convert it.
Proposed by Christian Moe.
* lisp/org-exp.el (org-export-handle-table-metalines): this function
removes table specific meta-lines, now that we aren't wiping
everything that looks remotely like a comment at the end of the
export process we have to be sure to catch all of the specific lines
in org-exp.el
* lisp/org-exp.el: (org-export-select-backend-specific-text) Properly
get rid of #+Backend and #+ATTR_Backend specifics to backends not
matching the one we're exporting to.
This patch changes the functionality of orgtbl-to-orgtbl so that it will
remove newline characters from the text of table cells and replace them
with "\n". This protects the final table from such newlines.
This patch will probably only have any noticeable effect for tables
imported form external files, or from the results of code blocks.
Best -- Eric
>From 34aacc9aa037e8f17c8d32ed61a25f0a350713a0 Mon Sep 17 00:00:00 2001
From: Eric Schulte <schulte.eric@gmail.com>
Date: Fri, 18 Jun 2010 12:38:26 -0700
Subject: [PATCH] org-table: will now strip newlines from the text of table cells
* lisp/org-table.el (orgtbl-to-generic): added the :remove-newlines
option which will strip newline characters from the text of table
cells and replace then with "\n"
(orgtbl-to-orgtbl): now using the new :remove-newlines option to
orgtbl-to-generic
Patch by Carsten
* lisp/org-exp.el (org-export-mark-blockquote-verse-center): fixed
small bug, now grabbing match data before overwritten by looking-at
this fixes a problem with remainders of #+end_quote lines appearing
in exported output
* lisp/org-latex.el (org-export-latex-fixed-width): now checking
org-example rather than org-protected on verbatim export, because by
default all ": " prefixed lines are marked protected
thanks to Christopher Allan Webber for catching this
* lisp/babel/langs/ob-python.el (org-babel-python-table-or-string):
now more careful not to replace "None"s which are not isolated
portions of lists
Thanks to Christopher Witte for raising these issues
* lisp/babel/langs/ob-haskell.el (org-babel-expand-body:haskell):
replaced missing () wrapping, and now using correct variable
expansion
(org-babel-execute:haskell): now using
org-babel-haskell-initiate-session to start sessions
(org-babel-haskell-initiate-session): only starting sessions if none
exists, also added a .25 second wait on brand new sessions to allow
the Haskell interpreter to fire up
(org-babel-load-session:haskell): now optionally accepts processed
params to avoid over-execution of variable resolution
(org-babel-prep-session:haskell): now optionally accepts processed
params to avoid over-execution of variable resolution, also placing
the variable definitions directly in the session instead of loading
them from a separate file
* lisp/org-entities.el (org-entities): Restructure the list.
(org-entities-help): Turn the help output into a buffer
in Org-mode, so that it becomes easier to find a symbol
in the structure.
(org-entities-create-table): Deal with new structure.
Thanks to Daniel Mahler for finding this problem and proposing the fix
* lisp/babel/ob.el (unless): ensure `declare-function' is available in
all Emacsen
* lisp/org-macs.el (org-not-nil): Return the value if not interpreted
as nil.
* lisp/org.el (org-entry-get):
(org-entry-get-with-inheritance): Interpret the value "nil"
as nil for properties.
Bernt Hansen writes:
> Carsten Dominik <carsten.dominik@gmail.com> writes:
>
> > On Jun 25, 2010, at 3:23 PM, Robert Goldman wrote:
> >
> > > Question: what is the proper way to get a NIL into a property? Are
> > > we
> > > to use () instead of "nil"? Or are property values always interpreted
> > > as strings?
> > >
> > > Apologies in advance if this is a stupid question!
> >
> > Not a stupid question at all.
> >
> > There is no way, currently. Property values are string - the only
> > way to make
> > org-entry-get return nil is to not have the property defined at all.
>
> I've wanted a similar thing in the past for the LOGGING property where
> the parent task has special logging set via the LOGGING property but I
> want to undo that for some of the child tasks so they use the default
> logging setup.
>
> Having a way to undefine a property would be good in general I think.
-Bernt
* lisp/org-macs.el (org-not-nil): New function.
* lisp/org.el (org-block-todo-from-children-or-siblings-or-parent):
Use `org-not-nil' to interpret a property value of nil.
Robert Goldman writes:
> I have found what I believe to be a bug in handling ordered subtasks.
> Here is the behavior:
>
> I have a top level set of tasks that is ordered.
>
> One of the outline items below the top level set is a grab bag of tasks
> that will be performed in parallel. So this task is NOT ordered
> (ORDERED: nil).
>
> The problem is that the blocking behavior from ordered tasks seems to be
> inherited from the top level task list into the second level of the
> outline, even though the ORDERED property at the second level is
> explicitly overridden.
>
> I am attaching an org file that displays this issue. To see the
> problem, put your cursor on the "Bar" task and attempt to change its
> status to DONE.
The problem was here that the value of the property is the string
"nil", which is of course not nil.
This patches introduces a special case to interpret "nil" as nil.
* lisp/babel/langs/ob-emacs-lisp.el
(org-babel-expand-body:emacs-lisp): removed extra call to
`org-babel-process-params' which was causing referenced code blocks
to be run multiple times
(org-babel-execute:emacs-lisp): now passing processed-params through
to `org-babel-expand-body:emacs-lisp' which keeps references from
being evaluated multiple times
* lisp/org-agenda.el (org-agenda-get-timestamps): No errors
while getting TODO state.
(org-agenda-highlight-todo): No error when no keyword has
been matched.
Eric Arneson writes:
> I've discovered a bug in `org-agenda-get-timestamps' wherein an active
> timestamp before the first headline causes it to fail. I realize that
> this is probably an error in my use of active timestamps, but there was
> no really handy error message and this bugged me for weeks.
>
> I'm not familiar enough with org-mode to know what the correct behavior
> should be here (it'd be nice to get an error message saying "Don't use
> active timestamps that way!"), but here's an example .org file that will
> trigger the bug:
>
> --8<---------------cut here---------------start------------->8---
> #+BEGIN: clocktable :maxlevel 3 :scope today
> Clock summary at [2010-06-20 Sun 13:09]
>
> | L | Headline | Time |
> |---+---------------------------------------+--------|
> | | *Total time* | *0:13* |
> |---+---------------------------------------+--------|
> | 1 | Track down funky bug <2010-06-20 Sun> | 0:13 |
> #+END:
>
> * Track down funky bug <2010-06-20 Sun>
> :LOGBOOK:
> CLOCK: [2010-06-20 Sun 12:43]
> CLOCK: [2010-06-20 Sun 12:30]--[2010-06-20 Sun 12:43] => 0:13
> :END:
> --8<---------------cut here---------------end--------------->8---
>
> I hope this can help somebody else track down the right place to fix
> this bug.
* lisp/babel/ob-exp.el (org-babel-exp-results): now checking to see if
return value of `org-babel-ref-literal' is equal to the null
indicator flag -- meaning it's now possible to accept a value of
null
* lisp/babel/ob-ref.el (org-babel-ref-parse): now checking to see if
return value of `org-babel-ref-literal' is equal to the null
indicator flag -- meaning it's now possible to accept a value of
null
(org-babel-ref-literal): now returning a null indicator flag when
the value is *not* a literal value, meaning it is possible to pass
in a literal value of null
Carsten Dominik <carsten.dominik@gmail.com> writes:
> 3 Why a new name?
> ~~~~~~~~~~~~~~~~~~
>
> I have - at least for now - chosen a new name for the new setup:
> ` org-capture'. There are two reasons for this:
In the manual it is "Capture - Refile - Archive". I remember searching
for "Remember" and never found it :)
> 5 Setup
> ~~~~~~~~
>
> To use the new setup, do the following:
>
> 1. Run
>
> M-x org-capture-import-remember-templates RET
Worked perfectly here :)
I tested all my important templates and they work.
Abandoning org-remember seems painless.
> '(("t" "templates adding table lines")
> ("ta" "add to table a" table-line (file+headline "~/notes.org" "Table A))
> ("tb" "add to table b" table-line (file+headline "~/notes.org" "Table B))
> ("tc" "add to table c" table-line (file+headline "~/notes.org" "Table C)))
>
> When starting capture, you can then first press "t" and then see
> the individual options.
This is great. Number of templates is constantly growing and the new
features will increase the speed of this process.
> 7 Request for comments
> ~~~~~~~~~~~~~~~~~~~~~~~
>
> None of what I describe is set in stone yet - let me know if you have
> comments, change requests or other ideas.
>
> My feeling right now is that this should become the default capture
> system, and that we will keep the current org-remember in the
> distribution for quite some time, for compatibility.
Good track I guess.
Here's the tested and working patch for org-protocol.el.
To use `org-remember' and/or `org-capture' alike, copy your org-remember
link and change
javascript:location.href='org-protocol://remember://'+...
to
javascript:location.href='org-protocol://capture://'+...
The template char used is the same for both --- which is OK for me, but
could be changed.
* lisp/org.el (org-timestamp-change): New optional argument UPDOWN.
Use this to identify calls from org-timestamp-up/down, so that we can
skip by rounding minutes in this case.
(org-timestamp-up):
(org-timestamp-down):
(org-timestamp-up-day):
(org-timestamp-down-day): Call org-timestamp-change with the
updown argument.
This function used to look only if there was a prefix argument in the
current interactive call. Now we have an explicit marker indicating
that the function is called from the updown commands.
Bernt Hansen writes:
> I was talking to Jeff Stern about tags todo matching offlist and we
> think the documentation for tags-todo matching can probably be improved.
>
> The description of C-c a M at
> http://orgmode.org/manual/Matching-tags-and-properties.html
> states
>
> C-c a M
>
> Like C-c a m, but only select headlines that are also TODO items and
> force checking subitems (see variable
> org-tags-match-list-sublevels). To exclude scheduled/deadline items,
> see the variable org-agenda-tags-todo-honor-ignore-options. Matching
> specific TODO keywords together with a tags match is also possible,
> see Tag searches.
>
> When I read this I think TODO items is any todo keyword but this isn't
> the case. It is only non-done TODO state keywords. This makes
> tags-todo matching not work for finding tasks to archive (normally
> DONE | CANCELLED keywords in my setup)
>
> Should we explicitly state that 'headlines that are also TODO items'
> does not match DONE state keywords? Or alternatively should TODO items
> and DONE items be separate (and explicitly defined) in the documentation
> -- like org-todo-keywords and org-done-keywords?
>
> I still think 'TODO keyword' matches any todo keyword defined in
> org-todo-keywords and maybe I need to be re-educated :)
Bernt is right, and this patch tries to clarify the issue.
* lisp/org-agenda.el (org-agenda-action): Make `c' key call org-capture.
* lisp/org-capture.el: New file.
* lisp/org-compat.el (org-get-x-clipboard): Function moved here from
remember.el.
* lisp/org-mks.el: New file
* lisp/org.el (org-set-regexps-and-options): Allow statistic cookies as
part of complex headlines.
(org-find-olp): New argument THIS-BUFFER. When set, assume that the
OLP does not contain a file name.
* lisp/org.el (org-mode): Set `comment-start' instead of changing the
syntax of the `#' character.
Leo writes:
> Setting a comment starter without a corresponding comment ender is
> problematic and the # creeps in mysteriously under auto-fill. For
> example, in my current running emacs, this happens almost certainly in
> all org files that has # in their header. The only (temporary) solution
> seems to reboot emacs (which is painful and disruptive).
>
> If you try eval (forward-comment 1) at the beginning of an org file that
> has some "#+..." it will move to the end of file (the whole file is
> regarded as one single comment). So when auto-fill a long text, it will
> find the common prefix to be #.
>
> In addition, I don't think org mode has clear comment syntax or ideas on
> what to do with it.
>
> I can't see any gain from (modify-syntax-entry ?# "<") so I am proposing
> removing it entirely and get rid of this mysterious and annoying bug
> once and for all.
>
> The attached patch may (though I think it is quite safe) cause some bugs
> but those will be fixable unlike the one mentioned above.
>
> Best wishes,
>
> Leo
* lisp/org-exp.el (org-export-format-source-code-or-example): Mark examples
by a property. o
* lisp/org-html.el (org-export-html-close-lists-maybe): Check if raw
HTML stuff was actually made from an example
Daniel Mahler writes:
> 2. I would like to embed source blocks in numbered lists, without
> breaking the numbering ie:
>
> 1) get ready
> #+BEGIN_SRC sh
> get_ready
> #+END_SRC
> 2) go
> #+BEGIN_SRC sh
> go
> #+END_SRC
>
> currently the src blocks cause the numbering to reset, so all
> items in a sequence like this are numbered 1
This patch fixes this issue - but I cannot say anymore why the code in
org-export-html-close-lists-maybe does in fact work. The code looks
wrong, but it seems to work. What looks wrong is that i does not
check for the true indentation in the case when the line is not
protected. It must be that this case is covered by some other code
further down in the exporter.
* lisp/babel/ob.el (org-babel-src-block-regexp):
ensure no whitespace in language names
(org-babel-inline-src-block-regexp):
ensure no whitespace in language names
- Removed the org-babel-tangle-langs variable.
- Added the org-babel-tangle-lang-exts alist for associating
languages with file extensions
- Comments now only added when the :comments header argument is set
to yes
* lisp/babel/ob-tangle.el (org-babel-tangle-w-comments):
this is now a defcustom
(org-babel-tangle-lang-exts): alist associating languages with file
extension, this is also a defcustom
(org-babel-spec-to-string): no longer using the complex tangle-lang
variables
* lisp/babel/ob.el (org-babel-interpreters): define this before it is
first used
* lisp/babel/ob.el (org-babel-call-process-region-original): define
this before it is first used
* lisp/babel/ob.el (org-babel-execute-src-block):
call-process-region-original is no longer free
(org-babel-org-babel-call-process-region-original):
call-process-region-original is no longer free and is now renamed
org-babel-call-process-region-original
(org-babel-tramp-handle-call-process-region):
call-process-region-original is no longer free
* lisp/babel/ob.el (org-babel-execute-src-block): now passing
additional optional argument to `org-babel-inert-results'
(org-babel-insert-result): now accepting additional language
variable
* lisp/babel/ob-comint.el (org-babel-comint-with-output):
Fixed egregious oversight in which we were assuming that the
`full-body' variable would be in scope at the time of macro
execution. Thanks to the compiler for finding this bug.
* lisp/babel/langs/ob-R.el (org-babel-R-evaluate): now using the fixed
`org-babel-comint-with-output' macro
* lisp/babel/langs/ob-haskell.el (org-babel-execute:haskell): now
using the fixed `org-babel-comint-with-output' macro
* lisp/babel/langs/ob-ocaml.el (org-babel-execute:ocaml): now using
the fixed `org-babel-comint-with-output' macro
* lisp/babel/langs/ob-octave.el (org-babel-octave-evaluate-session):
now using the fixed `org-babel-comint-with-output' macro
* lisp/babel/langs/ob-python.el (org-babel-python-evaluate): now using
the fixed `org-babel-comint-with-output' macro
* lisp/babel/langs/ob-ruby.el (org-babel-ruby-evaluate): now using the
fixed `org-babel-comint-with-output' macro
* lisp/babel/langs/ob-sh.el (org-babel-sh-evaluate): now using the
fixed `org-babel-comint-with-output' macro
we are keeping two things in the contrib directory
1) the library-of-babel.org file, this is with the goal of lowering
the barrier of entry for contribution of functions to the library
of babel
2) we are also keeping a langs directory in the contrib directory
because some language files do not have FSF copyright assignment
-- current org-babel-oz.el is the only such file
* lisp/org-latex.el: items are no longer skipped when their first line
ends on a protected element.
* lisp/org-list.el: protected environments looking like lists are not
exported anymore.
Thanks to Nicolas Goaziou <n.goaziou@gmail.com> for this patch.
* lisp/org-exp.el: comment regexp now matches documentation. No more
protection check when deleting comments before export.
Thanks to Nicolas Goaziou <n.goaziou@gmail.com> for this patch.
* lisp/org-exp.el (org-export-preprocess-string):
now using `org-export-handle-include-files-recurse' to resolve
included files
(org-export-handle-include-files): now returns a list of the
included files
(org-export-handle-include-files-recurse): recursively calls
`org-export-handle-include-files' while checking to see if the
process has entered an infinite loop.
Thanks to Eric Schulte for this patch.
(org-agenda-get-scheduled):
* lisp/org.el (org-time-string-to-seconds):
For deadline and scheduled agenda display ignore the cyclic repeater
when calculating how many days late the task is. If you have a weekly
task and miss the date the agenda view will show more than a week late
now instead of resetting on the cyclic repeating date. This makes it
much more obvious when you missed a repeating task after the repeater.
Thanks to Bernt Hansen for this patch.
* org.el (org-raise-scripts): Do not fontify sub/superscripts of text
with face `org-special-keyword'. Makes property keys as :LAST_REPEAT:
display correctly.
This patch adds a modification hook to remove inline-image overlays if
the underlying text is modified. This prevents blind editing of text
behind images.
* lisp/org-exp-blocks.el (org-export-blocks-postblock-hook): adding
documentation to and turning into a defcustom
(org-export-blocks-preprocess): actually running the
`org-export-blocks-postblock-hook' hook after preprocessing
Environments coming from latex backend specific instructions (#+LaTeX)
are already protected and won't be treated as normal environments.
* lisp/org-latex.el (org-export-latex-preprocess): Environments coming
from latex backend specific instructions (#+LaTeX) are already
protected and won't be treated as normal environments.
use a property named "task_id" instead as we do not search for task
ids across files. For resources use a property named "resource_id" or
only as a fall back the ID property.
Also issue a warning if a dependency cannot be resolved.
- Attributes are now insetred generically based on an item (resource
or task) a list of attrbutes
- project end is now solely calculated and no longer inserted in the
node
Carsten Dominik
Eric Schulte
David Maus
Sebastian Rose
Bernt Hansen
Julien Danjou
Nicolas Goaziou
John Wiegley
Christian Egli
Bastien Guerry
Mikael Fornius
Martin Pohlack
Christian Egli