patch by Stephen Eglen.
Here is a patch for the 'capture' section of org.texi . I've added a
few lines of @comments:
+@comment SJE: Should be Org file or Org-mode file (see prev two items)?
+@comment SJE: should these sentences terminate in period?
(i.e. the following lines in the table)
+@comment SJE: org-feed is not autoloaded - should that be mentioned?
Stephen
Thanks to Bernt Hansen for pointing this out
* doc/org.texi (Languages): updating require statements for the next
org-babel syntax
(Batch execution): updating require statements for the next
org-babel syntax
Bernt Hansen writes:
> I was talking to Jeff Stern about tags todo matching offlist and we
> think the documentation for tags-todo matching can probably be improved.
>
> The description of C-c a M at
> http://orgmode.org/manual/Matching-tags-and-properties.html
> states
>
> C-c a M
>
> Like C-c a m, but only select headlines that are also TODO items and
> force checking subitems (see variable
> org-tags-match-list-sublevels). To exclude scheduled/deadline items,
> see the variable org-agenda-tags-todo-honor-ignore-options. Matching
> specific TODO keywords together with a tags match is also possible,
> see Tag searches.
>
> When I read this I think TODO items is any todo keyword but this isn't
> the case. It is only non-done TODO state keywords. This makes
> tags-todo matching not work for finding tasks to archive (normally
> DONE | CANCELLED keywords in my setup)
>
> Should we explicitly state that 'headlines that are also TODO items'
> does not match DONE state keywords? Or alternatively should TODO items
> and DONE items be separate (and explicitly defined) in the documentation
> -- like org-todo-keywords and org-done-keywords?
>
> I still think 'TODO keyword' matches any todo keyword defined in
> org-todo-keywords and maybe I need to be re-educated :)
Bernt is right, and this patch tries to clarify the issue.
* lisp/org-agenda.el (org-agenda-action): Make `c' key call org-capture.
* lisp/org-capture.el: New file.
* lisp/org-compat.el (org-get-x-clipboard): Function moved here from
remember.el.
* lisp/org-mks.el: New file
* lisp/org.el (org-set-regexps-and-options): Allow statistic cookies as
part of complex headlines.
(org-find-olp): New argument THIS-BUFFER. When set, assume that the
OLP does not contain a file name.
source-code-chapter.texi is just reference.org with level 1 headings
replaced with @section, and level 2 headings replaced with
@subsection, and with a top level @chapter node. This file is included
in org.texi with an @include line for now.
* lisp/org.el (org-ctrl-k-protect-subtree): New option.
(org-kill-line): Protect hidden subtrees if the user wants it.
* doc/org.texi (Headlines): Mention the special behavior of C-k
in headlines.
Scott Otterson writes:
> For what must be the dozenth time, I've just accidentally deleted a
> large tree by typing C-k while in a headline.
>
> This is really easy to do because emacs users have "C-k deletes to the
> end of the line" worn deeply into their neural pathways -- it's so
> automatic for me that the keystroke is close to subconscious. A
> mistaken C-k is especially hard to detect because org-mode displays
> the result exactly like what your subconscious expects, that is, a
> collapsed headline is deleted to the end -- and the tree underneath is
> wiped out with no noticeable warning.
>
> Feature request: add an option preventing tree deletion with C-k
> without user confirmation. Actually, I'd like an option to prevent it
> period.
>
> If this option is already in there, then you're encouraged to tell me
> to RTFM. But then also please tell me where it is, because I can't
> find it.
Carsten replies
> This is now possible due to the variable
> `org-ctrl-k-protect-subtree'. But I predict that you are going to set
> it to nil again soon :D
* doc/org.texi (Subscripts and superscripts): Document that `C-c C-x \'
will also format sub and superscripts.
* doc/orgcard.tex: Document that `C-c C-x \'
will also format sub and superscripts.
* lisp/org.el (org-use-sub-superscripts):
(org-pretty-entities-include-sub-superscripts): Move here from
org-exp.el.
(org-set-regexps-and-options): Parse subscript option and set
`org-use-sub-superscripts' as a local variable.
(org-match-sexp-depth):
(org-create-multibrace-regexp):
(org-match-substring-regexp):
(org-match-substring-with-braces-regexp): Moved here from org-exp.el
(org-set-font-lock-defaults): Call `org-raise-scripts'.
(org-remove-font-lock-display-properties): New function.
(org-unfontify-region): Call
`org-remove-font-lock-display-properties'.
(org-script-display): New constant.
(org-raise-scripts): New function.
When turning on entity display with `C-c C-x \', sub- and superscripts
will also be displayed in a smaller font, and raised/lowered.
* doc/org.texi (Plain lists): Document
`org-list-demote-modify-bullet'.
* lisp/org-list.el (org-list-demote-modify-bullet): Improve docstring
by showing an example.
This change was triggered by a request by Livin Stephen Sharma.
* org-clock.el (org-dblock-write:clocktable): Return total time.
(org-clocktable-steps): Skip step when time is zero and the
:stepskip0 property is set.
Rainer Stengele writes:
> Creating clocktables for each day of a month is an excellent feature
> in org! Problem for me is that many resulting tables have a total
> time of 0:00. The problem is not really the zero time I spent but the
> appearance of the tables with zero total time.
>
> Is there a possibility to skip getting such tables? Rational: I do
> not need to show my boss or customer days where I spent 0:00 time on
> the project.
Now you can set :stepskip0 to achieve this.
Adam Elliott writes:
> I have attached a git patch against master that implements a new
> parameter to clock tables, "tags". This parameter is a tags-query as a
> string and is used to filter the headlines which are consulted when
> building the clock table.
>
> In my search of the archives to see if this feature already existed, I
> found a reference here:
> http://article.gmane.org/gmane.emacs.orgmode/17304
> suggesting it was difficult. The patch is not so large, though, so
> perhaps I am missing something.
>
> My rationale in implementing this feature was to keep track of the
> occasional task item that is not billable, yet still makes sense to
> include in the overall project structure. Of course I could just avoid
> clocking the task item, or manually delete clock lines before generating
> a report, but this feature reduces the chance for error; no doubt there
> are other workflows enabled with this feature as well. I don't make
> significant use of tags myself, but I know many do.
>
> In order to maintain a sensible report, headlines that don't match the
> tag filter may be included if they have descendants that do. Any time
> clocked directly on non-matching headlines, however, is excluded.
>
> Specifying even a simple filter noticeably slows down clock table
> generation for non-toy reports, particularly for clock table reports
> with :step. If there is no filter, though, there is no degradation in
> performance.
>
> Tag filter syntax is the standard one, as described at:
> http://orgmode.org/manual/Matching-tags-and-properties.html
> Only tags are considered at the moment, although I suspect querying
> against all properties would be possible (if even slower).
>
> Examples:
>
> * development
> CLOCK: => 1:00
> *** task 1
> CLOCK: => 1:00
> *** task 2 :must:
> ***** task 2a
> CLOCK: => 1:00
> ***** task 2b :mustnot:
> CLOCK: => 1:00
>
> Note I am using an unconventional but legal(ish) clock format for
> brevity. Clock tables are also pruned to only relevant lines.
>
> [1] #+BEGIN: clocktable
> | | *Total time* | *4:00* | | |
> |---+--------------+--------+------+------|
> | 1 | development | 4:00 | | |
> | 2 | task 1 | | 1:00 | |
> | 2 | task 2 | | 2:00 | |
> | 3 | task 2a | | | 1:00 |
> | 3 | task 2b | | | 1:00 |
>
> [2] #+BEGIN: clocktable :tags "must"
> | | *Total time* | *2:00* | | |
> |---+--------------+--------+------+------|
> | 1 | development | 2:00 | | |
> | 2 | task 2 | | 2:00 | |
> | 3 | task 2a | | | 1:00 |
> | 3 | task 2b | | | 1:00 |
>
> [3] #+BEGIN: clocktable :tags "-mustnot"
> | | *Total time* | *3:00* | | |
> |---+--------------+--------+------+------|
> | 1 | development | 3:00 | | |
> | 2 | task 1 | | 1:00 | |
> | 2 | task 2 | | 1:00 | |
> | 3 | task 2a | | | 1:00 |
>
> [4] #+BEGIN: clocktable :tags "must-mustnot"
> | | *Total time* | *1:00* | | |
> |---+--------------+--------+------+------|
> | 1 | development | 1:00 | | |
> | 2 | task 2 | | 1:00 | |
> | 3 | task 2a | | | 1:00 |
>
> [5] #+BEGIN: clocktable :tags "must+mustnot"
> | | *Total time* | *1:00* | | |
> |---+--------------+--------+------+------|
> | 1 | development | 1:00 | | |
> | 2 | task 2 | | 1:00 | |
> | 3 | task 2b | | | 1:00 |
>
> As you can see, in examples 2, 4, and 5, the time clocked on
> "development" itself is being removed. Example 2 illustrates the effect
> of tag inheritance.
>
> Adam
This behavior is now parallel to the treatment of outline nodes.
This commit also introduces another change. When an outline node or a
plain list item is folded by outline and contains hidden children,
M-left/right will refuse to act on this item. You must either open
the tree, or use the subtree commands M-S-left and M-S-right.
Based on a patch by Matti De Craene, but significantly modified after
a discussion involving Bernt Hansen and others.
The target state can now be fixed locally with the REPEAT_TO_STATE
property, or globally with the variable `org-todo-repeat-to-state'.
This was a request by John Wiegley.
source-code-chapter.texi is just reference.org with level 1 headings
replaced with @section, and level 2 headings replaced with
@subsection, and with a top level @chapter node. This file is included
in org.texi with an @include line for now.
This new code will search #+INDEX lines in the buffer. For LaTeX, it
will simple convert these into LaTeX \index{} commands. For other
backends, it will copy thee entries to a new file, with extension
orgx. These files can then later be post-processed to create the index.
Dan Davison writes:
> Bug report
> ==========
> If I have this:
>
> A [[file:zz.org::#mytarget][link]] to a target with a custom ID
>
> and export it to HTML, I get
>
> A <a href="zz.html##mytarget">link</a> to a target with a custom ID
>
> which (in firefox on linux) links to the file but does not jump to the
> target. However, if I change the '##' to '#' then firefox jumps to the
> correct location. Is this an org bug?
>
> Very tentatively proposed patch
> ===============================
> I've investigated a bit (notes below), resulting in this proposed patch:
>
> --8<---------------cut here---------------start------------->8---
> diff --git a/lisp/org-html.el b/lisp/org-html.el
> index aa70408..5ee5b19 100644
> --- a/lisp/org-html.el
> +++ b/lisp/org-html.el
> @@ -1110,7 +1110,7 @@ lang=\"%s\" xml:lang=\"%s\">
> (abs-p (file-name-absolute-p filename))
> thefile file-is-image-p search)
> (save-match-data
> - (if (string-match "::\\(.*\\)" filename)
> + (if (string-match "::#?\\(.*\\)" filename)
> (setq search (match-string 1 filename)
> filename (replace-match "" t nil filename)))
> (setq valid
> --8<---------------cut here---------------end--------------->8---
>
> Doc patch
> =========
> The link above (file:zz.org::#mytarget) was created by C-c l on a
> heading with a CUSTOM_ID property. However, I couldn't see where in the
> manual links of this form are documented. Do we need to add this link
> type to section 4.7 "Search options in file links", e.g.
>
> --8<---------------cut here---------------start------------->8---
> diff --git a/doc/org.texi b/doc/org.texi
> index f49f056..c8cc1a5 100644
> --- a/doc/org.texi
> +++ b/doc/org.texi
> @@ -3116,6 +3116,7 @@ link, together with an explanation:
> [[file:~/code/main.c::255]]
> [[file:~/xx.org::My Target]]
> [[file:~/xx.org::*My Target]]
> +[[file:~/xx.org::#my-custom-id]]
> [[file:~/xx.org::/regexp/]]
> @end example
>
> @@ -3130,6 +3131,8 @@ link will become an HTML reference to the corresponding named anchor in
> the linked file.
> @item *My Target
> In an Org file, restrict search to headlines.
> +@item #my-custom-id
> +Link to a heading with a @code{CUSTOM_ID} property
> @item /regexp/
> Do a regular expression search for @code{regexp}. This uses the Emacs
> command @code{occur} to list all matches in a separate window. If the
> --8<---------------cut here---------------end--------------->8---
>
> Notes
> =====
> At line 1134 of org-html.el there is
>
> (setq thefile (concat thefile "#"
> (org-solidify-link-text
> (org-link-unescape search)))))
>
> during evaluation of which 'search is bound to "#mytarget", which
> suggested that the problem might be in the regexp parsing creating
> 'search.
This support was totally broken. It works now again. Unfortunately
it is not possible to edit the table directly in the org-mode buffer
anymore - to edit such a table, you have to use C-c '
This patch implements reading American dates, like
2/5/3 --> 2003-02-05
2/5 --> ????-02-05
Is also fixes a bug that would force the current year when reading a
date like 2/5 (American) or 2-5 (ISO), and in this way would prevent
`org-read-date-prefer-future' to do its job. This bug was reported by
Lukasz Stelmach.
This can help to get out of an inconsistent state produce for example
by viewing from the agenda. Reported by Matt Lundin:
> I'd like to report a minor issue with org-agenda-goto and inline tasks.
> Let's say one has the following file:
>
> --8<---------------cut here---------------start------------->8---
> * Here is an entry.
> Blah blah blah blah.
> *************** Here is an inline task.
> *************** END
> Blah blah blah blah blah.
> *************** TODO Here is a second inline task.
> *************** END
> Blah blah blah blah blah.
> *************** Here is a third inline task
> *************** END
> Blah blah blah blah blah.
> --8<---------------cut here---------------end--------------->8---
>
> Let's say one also has the following settings:
>
> --8<---------------cut here---------------start------------->8---
> (setq org-show-hierarchy-above t)
> (setq org-show-siblings '((default . nil) (isearch . t) (agenda . t)))
> (setq org-show-entry-below '((default . nil) (isearch . t) (agenda . t)))
> --8<---------------cut here---------------end--------------->8---
>
> If 1) one tries to jump to the TODO from the agenda and 2) the entry is
> currently folded, org-show-context reveals only the headlines. E.g.,
>
> --8<---------------cut here---------------start------------->8---
> * Here is an entry.
> *************** Here is an inline task.
> *************** END...
> *************** TODO Here is a second inline task.
> *************** END...
> *************** Here is a third inline task
> *************** END...
> --8<---------------cut here---------------end--------------->8---
>
> Invoking org-cycle on the END headline does nothing, since all headlines
> deeper than org-inlinetask-min-level are exempted from cycling. As a
> result, the only way to reveal the text in the entry is to cycle the
> parent twice (first to close, then to reveal).
Add a variable org-complete-tags-always-offer-all-agenda-tags, which makes org
complete all tags from all agenda files if non-nil. Usually, setting it
locally to t in org-remember buffers is most convenient.
Rick Moynihan writes:
> I'm wondering if anyone logs rescheduled tasks with org-mode... As I
> find myself sometimes scheduling tasks for a future date, but then on
> the day not having the capacity to do them. In these situations I
> just reschedule them, but it'd be nice to record the dates for which
> an item was originally scheduled in the LOGBOOK.
>
> Has anyone configured org-mode to do this? lognotedone only appears to
> log state changes (rather than schedule/deadline changes).
The following keys now do archiving
C-c C-x C-a archive using the command specified in
`org-archive-default-command'
This variable is by default set to `org-archive-subtree', which means
arching to the archive file.
The three specific archiving commands are available through
C-c C-x C-s archive to archive file
C-c C-x a toggle the archive tag
C-c C-x A move to archive sibling
These bindings work the same in an Org file, and in the agenda.
In addition:
- In the agenda you can also use `a' to call the default archiving
command, but you need to confirm the command with `y' so that this
cannot easily happen by accident.
- For backward compatibility, `C-c $' in an org-mode file, and `$' in
the agenda buffer continue to archive to archive file.
Now the recommendation is to use clock persistence only for the
history, and to use John's code for resolving a clock that has been
idle (either because the user stopped working or exited Emacs).
org-habit.el: New file, which implements code to build a "habit
consistency graph".
org-agenda.el (org-agenda-get-deadlines)
(org-agenda-get-scheduled): Display consistency graphs when outputting
habits into the agenda. The graphs are always relative to the current
time.
(org-format-agenda-item): Added new parameter `habitp', which indicates
whether we are formatting a habit or not. Do not display "extra"
leading information if habitp is true.
(org-agenda-auto-exclude-function): New customization variable for
allowing the user to create an "auto exclusion" filter for doing
context-aware auto tag filtering.
(org-agenda-filter-by-tag): Changes to support the use of
`org-agenda-auto-exclude-function'. See the new manual addition,.
See the new manual section on "Resolving idle time".
(org-clock-resolve-clock): If keeping or subtracting time results in a
clock out at a time in the past, and if the resolution occurred due to
idleness or invoking `M-x org-resolve-clocks', remember that past moment
in time. On the next clock in, the user will be prompted to see if they
want to back-date their new clock to then.
(org-clock-resolve): Do not jump the user to the location of a dangling
clock if the resolution is occuring due to an idle timeout. In that
case there is typically only one dangling clock, the active one, and
there is no value gained by shuffling their windows around to show it to
them. Being prompted to resolve an idle clock should be as inobtrusive
as possible.
(org-resolve-clocks-if-idle): New function that resolves only the
currently active clock if the user has exceeded the time returned by
`org-user-idle-seconds', based on the value of `org-clock-idle-time'.
(org-clock-in): If, after resolving clocks,
(org-clock-out): Cancel the `org-clock-idle-timer' on clock out.
This file should be with the other org files, and not in the staging
area. Also, when file names in mobileorg.org are interpreted, this
should be relative to org-directory. So we also require now that the
user set this variable.
The default in search view is not that the search expression is
searched for as a substring, i.e. the different words must occur in
direct sequence. The old way is only used it the first word in
the search string is preceded by a plus or a minus.
This was, more-or-less, requested by John Wiegley.
The reorganizes parts of the manual. The Archiving stuff has been
moved into the new chapter "Capture-Refile-Archive". Also, there is a
new chapter "Markup" to contains both the markup rules (moved there
from the Export chapter) and the embedded LaTeX stuff.
PT writes:
> Currently, I'm using Google Calendar and it's quick add syntax is very
> convenient:
>
> http://www.google.com/support/calendar/bin/answer.py?hl=en&answer=36604#text
>
>
> Of course, Org has similar capabilites, but I found one thing which
> google calendar does better: if it's 4pm and I add an event for 8am
> then GCal schedules it for 8am tomorrow.
>
> Org, on the the other hand, schedules it for 8am today even if that
> time is already passed.
>
> I never add past events and I think it's quite atypical. Shouldn't be
> an option similar to org-read-date-prefer-future for times too, so
> that timestamps also prefer the future when no date given?
This is now possible, but it is not the default. You need to set
(setq org-read-date-prefer-future 'time)
The new variable org-mobile-files can now be configured to include
non-agenda files into the staging area for MobileOrg. Furthermore,
files that are located in a subdirectory of `org-directory' will also
end up in a sub-directory in the staging area.
Peter Westlake writes:
> Could I request this as a small feature enhancement, please?
> Commands like org-refile have an agenda equivalent so that
> the same keys work in the agenda, and it would be very nice
> to be able to store a link to an item that way as well.
The width and alignment in table columns can be set with a cookie like
"<10>" or "<r>" or "<r10>". In order to keep Org from exporting such
lines, the first column of a line can contain only "/". However, for
convenience, this commit implements a special case: If the entire row
contains only sch markers, the line will automatically be discarded
during export.
The new keys are b and f. This used to be on the cursor keys, but
they do now again do cursor motion.
This is a significant change in the UI, I hope this will not cause too
many problems.
A relative row reference like @-1 in a table may now reach across a
horizontal separator line. I hope this will not break any important
tables out there, but I think it is the right thing to do.
The original reason for not-crossing was to implement running
averages of one column in the next. This can now be done using field
formulas near the beginning and end of the column, and a column
formula for the central part.
See the variable `org-table-relative-ref-may-cross-hline' for more
details.
Using :timetamp t as an option in a clock report now allows
insertion of the timestamp for the clocked entry. Timestamps
are searched for in this order: SCHEDULING, TIMESTAMP, DEADLINE
and TIMESTAMP_IA.
Allow whitespace in code references. Allow the -r switch to remove the
references in the source code even when the lines are not numbered: the
labels can be explicit enough. Note that "-r -k" is the same than no
switch - as expected.
Thanks to Ulf Stegemann for bring this up.
This hook is called in org-clock-in earlier than the existing
org-clock-in-hook. This is useful for functions that need to
modify the Effort property, for example.
When changing the publishing setup, old timestamp files can be left
behind. Forcing publishing of all projects with `C-u C-c C-e E'
will remove all existing timestamp files.
Many different people want to set many different variables in a
buffer-local way for export. This cannot be done with file variables,
because the Org buffer is not current while the exporter is running.
Lots of variables can be set with the #+OPTIONS lines, but finding
abbreviations goes only so far.
Therefore we have now a general mechanism that can be used to bind
variables during export operations.
a line like: #+BIND: variable value
will bind the variable to value. For example,
the line
>> #+OPTIONS: toc:nil
can now equivalently be written as
>> #+BIND: org-export-with-toc nil
Customize the new variable org-footnote-auto-adjust or use the STARTUP
option fnadjust to get automatic renumbering and sorting of footnotes
after each insertion/deletion.
Agenda bulk commands on marked entries now can also set the scheduling
date or a deadline. Normally, all entries will be set to the
specified date. However, when writing the change as "++5d" or "++2w",
then each time stamp will independently be shifted by that amount.
TAB now cycles visibility in plain lists if the cursor is in a plain
list. This corresponds now to the new default value `t' of
`org-cycle-include-plain-lists'. If you want to treat plain list
items as part of the outline hierarchy during cycling of outline
headings (this is what a `t' value used to mean), set this variable to
`integrate'.
This commit implements refiling directly from the agenda.
It also implements a mechanism for selecting a number of entries in
the agenda and then executing a command on all of them. Possible
actions include archive, refile, todo state setting, and more.
Michael Brand writes:
> 2) One could like to have configurable left/right alignment, even
> combinable with column width, e. g.
>
> | <l10> | <r> |
> | 3.14 | 0x10 |
> | 3.141592=> | 0x32 0x10 |
Good idea, I would say.
Clicking on the clock in the mode line now pops up a menu with
clocking options.
A new command `C-c C-x C-e' allows to set or change the effort
estimate of the task currently being clocked. This is mainly useful
when using an alert notification when the task should be finished.
Based on a patch by Konstantin Antipin.
This commit changes which time is shown in the mode line while
clocking. Normally this will now be the total time ever clocked on
this task and its children.
However, when the task is a repeating one, only the time since the
last reset of the task will be shown. The time of the last reset is
now recorded in a LAST_REPEAT property.
You can also set the CLOCK_MODELINE_TOTAL property to the value
"current" to only show the current clocking instance. Or it may be
the value "today", to only add up the time spent today on this task.
Other possible values are "repeat", "all", or "auto".
Finally, you can set your default for this property with
`org-clock-modeline-total'.
This commit introduces two new variables:
- org-treat-insert-todo-heading-as-state-change
Default is nil. When set to t, adding a new TODO item will be done
by adding an item and the executing an "official" state change which
potentially will trigger state logging.
- org-treat-S-cursor-todo-seletion-as-state-change
Default is t. When set to nil, selecting a TODO state with
S-left/right will not trigger logging, only selecting a new state
with `C-c C-t'. I actually like this a lot and would even consider
making this the default.
Mikael Fornius writes:
> This is my suggestion of an implementation of min/mean/max computation
> in columnview summaries. If you like it feel free to use it.
>
> New operators: {min}, {max} and {mean} possibly prefixed with : for use
> with timevalues.
>
> Example from my running exercise diary:
>
> #+COLUMNS: %DISTANCE{+;%.1f} %HEARTRATE{mean;%.1f} %SPEED{:min} %CALORIES{+}
>
> Gives a colview with summaries:
>
> total distance, mean heartrate, fastest speed (min/km) and total
> calories.
>
> I have tested it on emacs-23 and it works well for me now, also with the
> interactive colview functions.
>
> But you never know really. ;-) Anyway, there should not be any emacs-23
> specific elisp code added afik.
>
> (Because I do not use xemacs I have not tested it with xemacs but the
> small changes I made should be compitable to both xemacs and emacs. I
> would appreciate if someone on this list who uses xemacs will give it a
> try for me. Thanks!)
>
> (This fix also opens up for using user defined lisp functions to
> calculate colview summaries, but I am not sure if that is something
> useful. Like this:
>
> (defun std (&rest values)
> "Compute standard deviation."
> ...)
>
> #+COLUMNS: %DATA{eval:std}
>
> If someone finds this attractive it would now be easy to implement as well.)
>
Hsiu-Khuern Tang writes:
> Hi Carsten,
>
> You recently changed org-edit-src-code to use a separate buffer
> instead of an indirect buffer. One side effect of this is that I
> can no longer edit several code examples at the same time:
> opening the second buffer will silently discard any changes made
> in the first. I would prefer this behavior: when opening the
> second edit source buffer, write any changes in the first buffer
> to the originating Org buffer (but don't save it, of course).
>
> Another approach is to use different buffer names.
The better approach is clearly to allow several buffers, now
implemented with this commit.
There is now a new export function, `org-export-as-org', which
basically creates a copy of the Org file with things like archived
trees, commented trees, and trees deselected by export tags,
stripped.
This commit adds:
{{{date(FORMAT)}}} current date/time, formatted with
`format-time-string'
{{{modification-time(FORMAT)}}} date/time of last modification of
file, formatted with `format-time-string'
{{{input-file}}} the file name of the source Org file.
The commit implements a general mechanism for providing special
(e.g. completion) support for specific link types when entering links
with `C-c C-l'. After calling `C-c C-l', you may now press RET after
inserting a link prefix, and Org will look for a function
`org-PREFIX-complete-link'. Such functions may be defined for any
link types, including link abbreviations. Currently, Org has
`org-file-complete-link' for file name completion, and
`org-bbdb-complete-link' for completion of record names from BBDB.
Jason Riedy writes:
> I'm trying to change org-export-latex-image-default-option
> to "width=.7\\linewidth" in a file local variable. It's set
> correctly as a buffer local variable, and it's having no
> effect on the export. My guess is that the buffer-local
> property is stopping it as soon as org-export-as-latex runs
> set-buffer.
>
> I can smuggle the value in by adding an entry to org-export-plist-vars
> referring to org-export-latex-image-default-option and pulling the value
> from the plist, but that feels incorrect.
It is actually the correct way to do this, and I have
implemented this change.
Samuel Wales writes:
> I frequently export to ascii without wanting a file to be created,
> especially not in a useful directory, as the files are temporary.
>
> Is there a way to export ascii to just a buffer?
There is now, `C-c C-e A'.
This commit also implements commands
- org-export-as-ascii-to-buffer
- org-replace-region-by-ascii
- org-export-region-as-ascii
which are similar to what is available for HTML and LaTeX.
`C-c C-e A' used to be the key for publishing all projects.
This functionality has now been moved to `C-c C-e E'.
The variable `org-refile-target-verify-function' can be set to a
function that will be called to verify a refile target. The function
must return t if the target is valid.
When refiling, you can now create new parent nodes on the fly. To do
this, set the variable `org-refile-allow-creating-parent-nodes' to
`confirm'. Then, at a refiling prompt, proceed with completion until
you have an existing heading, and then add "/new heading", i.e. a
slash followed by the new heading. That heading will be created as a
child of the existing heading, and the entry to be refiled will end up
under that new heading.
New wrapper span around keyword plus time stamp, with class
timestamp-wrapper.
.timestamp-wrapper {float: right;}
could be a nice entry in a CSS style file.
Mapping call a function for each matching entry. So far this has
always assumed that the entry stays in the buffer and search can
continue from there. However, when the mapper function removes the
tree, more control is needed to specify from where the search should
continue.
The action function handed to the mapping function can now set the
variable `org-map-continue-from' to the position from where mapping
should continue.
During secondary agenda filtering, pressing "?" now will install a
filter that selects entries which do not have an effort defined.
This new model was necessary because we needed to stop interpreting
entries with no effort defines as 0 effort. This was inconsistent,
because for normal agenda sorting, the treatment of these entries
depends on the variable `org-sort-agenda-noeffort-is-high'. Now this
variable is also respected during filtering.
The new variable `org-agenda-cmp-user-defined' can contain a function
to test how two entries should be compared during sorting.
user-defined-up and user-defined-down can then be part of any sorting
strategy.
This commit implements an important change: When, during a
stuck-project search, a project tree is identified as not stuck, so
far the search would continue after the end of the project tree. From
now on, the search continues in the subtree, so that stuck subprojects
can still be identified.
> Feature Request: that the pdf saved automatically from agenda be
> immediately displayed
> The saving of a pdf is a really nice feature. I had hacked
> org-agenda, I think, to automatically do this. However, it would
> be nicer if immediate display were optional. I don't know
> whether \C-u makes sense as a prefix to saving a file with \C-x
> \C-w. Perhaps not.
Why not, C-c C-x C-w is a fine idea for this. It should now work.
Anupam Sengupta writes:
> I routinely use time ranges (and occasionally time-stamp ranges)
> in my org files to document the scheduled block of time for a
> meeting or activity. As an example, I will mark meetings as:
>
> * A Meeting
> <2009-03-12 Thu 10:00-11:00>
>
> As often happens with meetings, rescheduling needs to be done and
> I use S-<up> or S-<down> on the time-stamp to make the
> modifications. While this works fine, it usually leads to a
> duplication when the *time* part of the time-stamp needs to be
> changed.
>
> For the same example above, if the time-block has now changed to
> 11:00-12:00, then I need to do S-<up> on both the "10:00" and the
> "11:00" string. I.e,
>
>
> * A Meeting
> <2009-03-12 Thu 11:00-11:00>
> ^
> +---------------- After the first S-<up>
>
> * A Meeting
> <2009-03-12 Thu 11:00-12:00>
> ^
> +---------------- After the second S-<up>
>
> Can we have a feature (with a toggle option perhaps) which would
> *move* the block (i.e., both time entries) by the same amount
> when either one is moved in the same direction. I.e., the
> proposal is to have:
>
> * A Meeting
> <2009-03-12 Thu 11:00-12:00>
> ^ ^
> | |
> | +---------- Automatically shifted
> +---------------- After the S-<up>
This is in fact how changing time works in many applications, and
it does make sense here as well. The commits implements this
change.
It also implements a way to change the start time of an entry from
the agenda. The date is normally changed with S-right/left.
Now, if you add a C-u prefix, the hour will be changed. If you
immediately press S-right/left again, hours will continue to be
changed.
A double prefix will do the same for minutes.
Installation of info files works differently in Debian. There is now
a new Makefile target `install-info-debian' to handle this, and this
fact is mentioned in the manual as well.
Undo will now remove up to 20 characters typed consecutively, just
like Emacs normally does. We need a special implementation for this
because Org has its own self-insert command.
The code for doing this is a patch by Martin Pohlack.
A line: #+MARCO: name replacement text
can be referenced by {{{name}}}. As special cases, {{{title}}} will
reference #+TITLE, and similar with similar lines.
orgstruct++-mode is an enhanced version of orgstruct mode that
also imports all indentation and paragraph settings into the major
mode. Furthermore, it now allows to use M-RET and M-S-RET in items
after the first line. The latter change was a request by Austin
Frank.
The new command `org-reload' allows to reload all Org lisp files.
By default it will load compiled files if these are available. If
not, or when called with a C-u prefix argument, uncompiled code will
be loaded. This is good for producing a meaningful backtrace when an
error occurs.
Like TODO keywords before, now also tags each get their own CSS class,
given by the tag itself. Invalid characters in tags are all replaced
by "_" to make sure the resulting HTML remains valid.
Two new variables can be used to add a prefix to the class names for
TODO keywords and tags.
This commit makes it possible to force new lines and even empty lines
in the fast tag selection interface, either by splitting tags
definition into several lines, or by inserting "\n" into the tags
list, or by inserting (:newline) into the tags alist.
This is largely a patch from Christopher Suckling
The variables `org-agenda-todo-ignore-deadlines' and
`org-agenda-todo-ignore-with-date, and
`org-agenda-tags-todo-honor-ignore-options' are now all mentioned in
the docs.
Selecting files for publishing was strictly based on extension.
Richard Klinda provided this patch to allow the symbol `any' as an
indicator to actually take all files in a directory.
Wanrong Lin writes:
2. Can we put all of those state change history logging messages
into a drawer like "STATE-HIST" (when the drawer is defined in
org-drawers), so it is less intrusive in the file?
Yes we can. This commit provides this functionality. It introduces a
new drawer, LOGBOOK. When the variable
`org-log-state-notes-into-drawer' is set, state change time stamps and
notes will go into this drawer, or another one specified by that
variable.
Wanrong Lin writes:
Right now in the HTML export the TODO keywords have either
class="todo", or class="done". That loses all the face properties
in the original TODO keywords. I think the TODO keywords faces are
important visual aids to differentiate different types of TODO
items, so I just wonder whether it is possible to keep the faces
in the HTML.
This makes sense. This commit adds, to each TODO keyword, an
additional class named after the keyword. For example:
<span class="todo WAITING">WAITING</span>
So each todo keyword gets class "todo" or "done" depending on which
general type it is. And in addition it gets itself as class.
So go to your CSS file and configure like this:
.todo { font-weight:bold; }
.done { font-weight:bold; }
.TODO { color:red; }
.WAITING { color:orange; }
.DONE { color:green; }
Thanks to Sebastian Rose for the multiple-classes trick.
David Lord writes:
I can see that org-clock-persistence-insinuate appeared in 6.11
but I can't find it in the manual. Does it need to be added?
Yes, right.
Turns out a number of people set their variables too late so that
activating dependencies does not work correctly. We now double-check
in the mode hook that everything is in order.....
This commit adds a key (`C-c C-x o') to toggle the ORDERED property of
a tree. And it adds menu entries for doing this, which also reflect
the current state of the tree.
I have changed my mind and turned off shift-selection support again by
default, because it causes confusing behavior, sometimes calling an Org
command and sometimes doing shift selection. The default behavior is
now:
- in special contexts, execute Org commands
- outside special contexts, create an error that will point users to
configure the variable `org-support-shift-select'. Hopefully that
will make them read the docstring and then decide for themselves
what to do.
Emacs 23 introduces `shift-selection-mode', and even turns it on by
default. Therefore, it is fair to assume that users of Emacs 23 will
expect to be able to select a region by holding down shift will moving
the cursor. This conflicts with the use of shifted cursor keys in
Org-mode for other purposes, in particular to "change the item under
the cursor", like it is done for time stamps, item bullet types, TODO
keywords and priorities.
This commit tries to support `shift-selection-mode' as much as possible,
while retaining these valuable commands keys for Org-mode. The
following things are changed:
1. The range of contexts where Org's commands do act is reduced.
- S-up and S-down no longer jump to the previous and next plain list
item - you can use the paragraph commands C-up and C-down for this
quite well.
- S-left and S-right only change the bullet type of a plain list
item when the cursor is *exactly* on the bullet, not just anywhere
in the item line.
2. When a S-cursor key is used outside a special context, a region is
started or extended.
3. When a region has already been started, it will be continue to
extend even if the S-cursor keys move the cursor into a special
context.
4. If you want S-cursor selection to work in headlines as well, you
can set the variable `org-support-shift-select' to
`even-in-headlines'. Then you need to rely on `C-c C-t' to set
TODO keywords, and on `C-c ,' to set priorities.
If you want everything to behave the way it was, set
`org-support-shift-select' to nil.
Formulas can now refer to fields and regions in other tables, be it in
the same file or even in different files.
This also opens the door for more interesting R support, because
arbitrary tables in a file can now be accessed with appropriate
commands.
Finally, this commit also introduces a convenience for creating
references in tables. For the purpose of references, it will always
be *assumed* that there is another hline at the end if each table. So
for example in a table that has only a single hline, to separate
header from data, you can now access all of column two with
"@I$2..@II$2".
The conversion commands `C-c -' and `C-c *' are now better
behaved and therefore more useful, I hope.
If there is an active region, these commands will act on the
region, otherwise on the current line.
- C-c - :: This command turns headings or normal lines into
items, or items into normal lines. When there is a
region, everything depends on the first line of the
region:
- if it is a item, turn all items in the region into
normal lines.
- if it is a headline, turn all headlines in the region
into items.
- if it is a normal line, turn all lines into items.
- special case: if there is no active region and the
current line is an item, cycle the bullet type of the
current list.
- C-c * :: This command turns items and normal lines into
headings, or headings into normal lines. When there is
a region, everything depends on the first line of the
region:
- if it is a item, turn all items in the region into
headlines.
- if it is a headline, turn all headlines in the region
into normal lines.
- if it is a normal line, turn all lines into headlines.
The directory used for attachments to an entry is by default chosen
automatically, with a name derived from the entry ID to make sure it
is unique.
However, in some cases it may be better to assign a user-chosen
directory to and entry, to be used for attachments. This commits
implements this change. See the documentation changes for information
on how things work.
Thanks to Jason Jackson for pushing this part.
The second change made bu this commit is that it is now possible to
inherit the attachment directory from a parent, so that an entire
project subtree can use a single directory.
Two new variables, `org-export-html-inline-image-extensions' and
`org-export-latex-inline-image-extensions' now define the file
extensions that will be considered for inlining images. The default
for HTML is png, jpg, jpeg, and gif files. The default for LaTeX is
png, jpg, jpeg, and pdf, assuming processing with `pdflatex'.
For LaTeX export, this can lead to conflicts for links that point
to non-image PDF files. To avoid that such a link will be inlined by
accident, always give a description text for such a link, one that is
not equal to the path.
Matt Lundin writes:
I had one more question/request concerning archives. Would
it perhaps be possible to enable the file name
substitution (i.e., "%s") after the double semi-colon, so
that the file name can be used as a headline within the
archive file? My ideal setup would be to have a single
archive file for each year's work, with headlines named
according to the original files of the archived subtrees.
E.g.,
,----
| * finances.org
| ** archived item
| * notes.org
| ** archived item
| ** another archived item
`----
This commit does implement this request.
Lines preceded by a colon are treated as fixed-width examples.
This commit improves the moment when the protection of these lines
happens during preprocessing. And it enforces that a space must
follow the colon for the line to be treated in this way.
The relative timer is now shown in the mode-line while running.
There is a new command to pause and continue it.
Thanks to Alan Davis for driving this change.
Sorting footnotes used to be almost like normalization, in that all
footnotes would be collected into a single location. Now sorting
respects the setting of `org-footnote-section'. If that is nil,
sorting will actually move each footnote into the outline node of its
first reference.
This commit add a new face for footnote labels, and activates footnote
labels for mouse clicks and for `C-c C-o', to jump to the
corresponding reference or definition.
This patch implements fully automatic creation of unique labels for
footnotes, which is also turned on as the default setting. The
automatic labels look like [fn:1], [fn:2], etc, using the first
available unused number.
The commit introduces a new variable, `org-footnote-auto-label' with a
number of different options ranging from no auto creation (prompting
the user for a label) to fully automatic creation.
Also, the commit introduces new #+STARTUP options that can be used to
select these settings on a per-file basis.
The dynamic block capturing column view has an :id parameter that does
select from where the column view should be captured. The routine
searching for this entry so far only searched the current file, now it
uses the full ID API to find the entry also in another file.
Furthermore, a value "file:path/to/file.org" will capture the global
column view of that file.
Report by Francois Lagarde.
After the failed implementation of `@0' as a reference for the last
line, this is a second attempt to provide such references. I would
have liked to allow `@last' as the reference, that would have been
beautiful. However, too many regular expressions directly search for
`@' followed by a number, so this is too hard to implement.
Therefore, I am now turning the last row into a row of implicitly
named fields. From now on, $LR1, $LR2,... can be used to refer to
fields in the last row. These names may also appear on the left hand
side of formulas.
A prefix argument to the `org-agenda-show' command is now interpreted
to make sure the entire entry is made visible in the other window, not
only the headline.
Exporting tables to LaTeX suffered from the problem that Org tables
are often long, but that the tabular environment in LaTeX cannot
handle long tables. This patch fixes this issue.
LaTeX export can now deal with very long tables, by setting an option
in the "ATTR_LaTeX:" line. Also, you can specify the alignment by
hand. Here is an example:
Also, table export now correctly deals with tables that start with a
hline. In such a case, also the LaTeX version will have this extra
hline before the first line.
The last data line in a table is often a line with important data, for
example sums of a column. In tables with varying length, the row
number of this line is constantly changing, which makes it hard to
write programs creating tables and then installing formulas.
This patch introduces @0 as a special reference to the last row, so
that @0$3 would be the field in the last row, 3rd column.
Unique identifiers for entries can now be used more efficiently.
Internally, a hash array has replaced the alist used so far to
keep track of the files in which an ID is defined. This makes it
quite fast to find an entry by ID.
There is now a new link type which looks like this:
id:GLOBALLY-UNIQUE-IDENTIFIER
This link points to a specific entry. When you move the entry to
a different file, for example if you move it to an archive
file, this link will continue to work.
The file /org-id.el/ contains an API that can be used to write
code using these identifiers, including creating IDs and finding
them wherever they are.
Org has its own method to create unique identifiers, but if the
system has /uuidgen/ command installed (Mac's and Linux systems
generally do), it will be used by default. You an also select
the method by hand, using the variable =org-id-method=.
If the ID system ever gets confused about where a certain ID is,
it initiates a global scan of all agenda files with associated
archives, all files previously known containing any IDs, and all
currently visited Org-mode files to rebuild the hash. You can
also initiate this by hand: =M-x org-id-update-id-locations=.
Running this command will also dump into the =*Messages*= buffer
information about any duplicate IDs. These should not exist, but
if you /copy/ an entry with its properties, duplicate IDs will
inevitably be produced. This is unavoidable in a plain text
system that allows you to edit the text in arbitrary ways, and a
portion of care on your side is needed to keep this system clean.
The hash is stored in the file =~/.emacs.d/.org-id-locations=.
This is also a change from previous versions where the file was
=~/.org=id-locations=. Therefore, you can remove this old file
if you have it. I am not sure what will happen if the =.emacs.d=
directory does not exists in your setup, but in modern Emacsen, I
believe it should exist. If you do not want to use IDs across
files, you can avoid the overhead with tracking IDs by
customizing the variable =org-id-track-globally=. IDs can then
still be used for links inside a single file.
IDs will also be used when you create a new link to an Org-mode
buffer. If you use =org-store-link= (normally at =C-c l=) inside
en entry in an Org-mode buffer, and ID property will be created
if it does not exist, and the stored link will be an =id:= link.
If you prefer the much less secure linking to headline text, you
can configure the variable =org-link-to-org-use-id=. The default
setting for this variable is =create-if-interactive=, meaning
that an ID will be created when you store a link interactively,
but not if you happen to be in an Org-mode file while you create
a remember note (which usually has a link to the place where you
were when starting remember).
Tables, and Hyperlinks that represent inlined images, can now be
equipped with additional information that will be used during
export. The information will be taken from the following special
lines in the buffer and apply to the first following table or
link.
- #+CAPTION: :: The caption of the image or table. This string
should be processed according to the export backend, but
this is not yet done.
- #+LABEL: :: A label to identify the figure/table for cross
references. For HTML export, this string will become the
ID for the `<div class="figure">' element that encapsulates
the image tag and the caption. For LaTeX export, this
string will be used as the argument of a `\label{...}'
macro. These lables will be available for internal links
like `[[label][Table] ]'.
- #+ATTR_HTML: :: Attributes for HTML export of image, to be
added as attributes into the `<img...>' tag. This string
will not be processed, so it should have immediately the
right format.
- #+ATTR_LaTeX: :: Attributes for LaTeX export of images, to
be inserted into the optional argument of the
`\includegraphics[...]{file}' command, to specify scaling,
clipping and other options. This string will not be
processed, so it should have immediately the right
format, like `width=5cm,angle=90'
For LaTeX export, if either a caption or a label is given, the
element will be exported as a float, i.e. wrapped into a figure
or table environment.
Samuel Wales writes:
> It would be really nice if you could set tags to different
> faces the way you can with todo keywords.
>
> For example, you could set :urgent: to a bright color. Or
> set a face for all contexts.
This patch add a new customization variable `org-tag-faces' that can
be used to specify such faces. The rest of the patch implements these
new faces in Org-mode buffers as well as in the agenda.
Harri Kiiskinen suggested that it might be useful to make the LOCATION
property an inherited property during iCalendar export. In this way
you can have set the LOCATION for a whole set of items by setting it
only in the parent.
While this will slow down iCalendar export for large files, I think it
can be quite useful. This patch does implement the basic code needed
for this functionality. However, you still need to tell Org that
LOCATION should be inherited, by setting org-use-property-inheritance.
If you set it to t, beware that this may trigger a significant
slowdown when creating the match view in the agenda. So it may be
better to set this variable to
(setq org-use-property-inheritance '("LOCATION"))
instead.
This patch improves the internal handling of the large number of
export options that Org-mode has. In particular, it now defines a
single constant, `org-export-plist-vars' that contains the full list
of options, and how these can be accessed through variables, and
through the #+OPTIONS line. Before the patch, there used to be a
separate list or the OPTIONS handling, which has gotten out of sync.
This now no longer can happen.
Also, this patch adds two new variables, `org-export-with-priority',
and `org-export-with-todo-keywords', which can be used to turn the
export of TODO keywords and priority cookies on and off, so that these
can simply disappear and not be shown in the exported file. In fact,
the default for the priority cookie is to remove it.
There were bugs in the mapping API, pointed to by Samuel Wales:
Manual says:
The following example counts the number of entries with TODO keyword
WAITING, in all agenda files.
(length (org-map-entries t "/+WAITING" nil 'agenda))
Org says invalid function for the string.
First of all, the example in the manual was wrong, the "nil" should be
gone. Second, the mapping function did not return all results in a
list, so that `length' could not count them.
This patch fixes these issues.
In addition to "<now>", "<today>", "<yesterday>", and
"<tomorrow>", there are more special values accepted now in
time comparisons in property searches: You may use strings
like =<+3d>= or =<-2w>=, with units d, w, m, and y for day,
week, month, and year, respectively
Thanks to Linday Todd for this proposal.
So far, the only way to select tags for inheritance was to
allow it for all tags, or to do a positive selection using
one of the more complex settings for
`org-use-tag-inheritance'. It may actually be better to
allow inheritance for all but a few tags, which was difficult
to achieve with this methodology.
This patch introduces a new option,
`org-tags-exclude-from-inheritance' which allows to specify an
exclusion list for inherited tags.
This patch does a lot of things. First, it makes sure that the tags
transferred to the agenda as text properties on each line are do carry
information about there origin (in the form of an `inherited' text
property). Then it modifies the function creating agenda lines so
that inherited tags will be listed and identified as such in the
agenda.
This new feature can be turned off with a new variable,
`org-agenda-show-inherited-tags'.
This file implements a special function to copy text from a w3m buffer
in a way that when the text is yanked back into an Org-mode buffer,
the links will be translated to Org syntax.
This cleans up the implementation of the timer. Most important change
is that, after starting a time list with `C-c C-x -', you can then
simply use M-RET to add new items, which is addictive!
This patch implements a relative time for taking timed notes, useful
for example while watching a video, or during a meeting which is also
recorded. Here are the new commands:
- `C-c C-x .' ::
Insert a relative time into the buffer. The first time
you use this, the timer will be started. When called
with a prefix argument, the timer is reset to 0.
- `C-c C-x -' ::
Insert a description list item with the current relative
time. With a prefix argument, first reset the timer to 0.
- `C-c C-x 0' ::
Reset the timer without inserting anything into the buffer.
By default, the timer is reset to 0. When called with a
`C-u' prefix, reset the timer to specific starting
offset. The user is prompted for the offset, with a
default taken from a timer string at point, if any, So this
can be used to restart taking notes after a break in the
process. When called with a double prefix argument
`C-c C-u', change all timer strings in the active
region by a certain amount. This can be used to fix timer
strings if the timer was not started at exactly the right
moment.
When starting the publishing process with
`org-publish-current-project' from a file that is located in a project
that is also a component of a parent project, this patch now makes
sure that the entire parent project is published instead.
When the export skips the text before the first headline, we now
include the comment line before the first headline, if any.
This makes sure that we can specify an anchor for this headline.
This patch defines a new minor mode, `org-remember-mode', which is
turned on when Org-mode is used to handle a remember buffer. This
provides a safe way to modify keybindings (in
`org-remember-mode-map'), without overwriting keys in `org-mode-map'.
Since Org put remember buffers into Org-mode, remember-mode-map will
be entirely ignored.
There was a bug in the implementation of the "<today>" tag for time
comparison during property matching, and new tags "<yesterday>" and
"<tomorrow>" have been introduced.
Patch by Piotr Zielinski.
This patch implements the possibility to translate links.
It can be useful if use both planner and Org-mode, if you sometimes
copy text from one side to the other and you do not want to worry
about link syntax. This patch allows links created with planner to
function correctly in Org-mode. I would probably be simple to
implement the reverse conversion in planner as well.
This patch is a first shot at this functionality and very likely can
be improved.
Org's `org-yank' now identifies itself as being `yank' by setting
`this-command', and by making sure that the mark is set correctly. In
this way, `yank-pop' will work correctly after using `C-y' in an
Org-mode buffer. Org-mode does not have its own implementation, to
`yank-pop' will insert content plainly, without adjusting tree levels,
and without folding.
Samuel Wales pointed out that `yank-pop' doe not work anymore.
Org-mode's `org-yank' command is used as a replacement for the normal
`yank' command. It differs by giving special treatment to subtrees or
sets of subtrees when yanking them, by adjusting the level to fit the
outline, and by folding the trees after the yank.
This patch does fine-tune this behavior.
First of all, if any prefix argument is given to the command, it
immediately hands over the action to the standard `yank' command. In
particular, you can use `C-u C-y' to yank as-is, with the only minor
side effect that the cursor will end up at the beginning of the yanked
text.
Secondly, the folding of the yanked trees will only happen if there is
no text directly after the insertion point that would be swallowed by
the folding process. This was confusing in the past and is much
better now, with a message announcing that folding has been
suppressed.
The refile command allows to move a subtree to under some other
heading, in the current file or even in a different file.
Sometimes one has a number of sibling subtrees that should all be
refiled to the same location. This patch implements a simplification
for this process. You can mark the region of subtrees (using
transient-mark-mode in required for this) and then move them all with
a single command.
Org-mode produces summaries of clocked items in the form of Org-mode
tables. This patch implements the possibility to define formulas that
should be applied to the clock tables, in order to do additional
analysis.
Formulas for clock tables are supported in two ways.
First, a formula can simply be added by hand to a table. Part of this
patch makes sure that, when the previous version of the table contains
a #+TBLFM: line, it will be copied to the new version.
Secondly, the clocktable definition allows a new parameter
`:formula'. The string value of this parameter will be installed as
the formula line for the table. If a formula parameter is given, it
will overrule any previous formula line.
As a special case, using the symbol `%' as the formula will install a
formula that will compute the fraction of total time that was spent in
a subtree.
In both cases, the formulas will be immediately evaluated after the
table has been created.
Jurgen Defume asked for a way to display only logging information in
the agenda. This patch implements such a possibility. It works by
calling `org-agenda-log-mode' (bound to `l' in the agenda) with a
double prefix arg. This sets the variable `org-agenda-show-log' to a
special value `only' which is then interpreted by the agenda-creating
functions.
Org records (depending on setup) various information about progress
achieved with projects and tasks. It can record when an item is done
(when it is "closed"), it can record time spent working on these
entries (clocking), and it can record state changes.
In the daily/weekly agenda, turning on logbook mode with the `l' key
will lists the tasks closed or clocked on a day.
This patch implements showing recorded state changes in the agenda
logbook. By default, showing state changes is not turned on. But you
can configure the new variable `org-agenda-log-mode-items' to trigger
inclusion of state changes. An alternative way is to press `C-u l' in
the agenda, to temporarily force inclusion of all possible entries
(closed, clock, state) into the agenda display.
In passing, this patch renames the function `org-agenda-get-closed' to
the now more appropriate `org-agenda-get-progress'. The old name
continues to be available as an alias, but its use is deprecated.
Org-mode uses a special setup with a number of different customization
variables to specify how a file should be opened when following a
:file:..." link with `C-c C-o'. By using a `C-u' prefix, it was
possible to overrule the customized setup and to force opening the
file in Emacs.
Samuel Wales requested to amend this process, so that a double prefix
argument would do the opposite: force opening the application *outside*
of Emacs, using a system default application. This is what this patch
implements.
Internally this works through a new entry in system specific constants
`org-file-apps-defaults-gnu', org-file-apps-defaults-macosx', and
`org-file-apps-defaults-windowsnt'. The new entry has the car
`system' and specifies the command that should be used for the double
C-u calls. As before, the user option `org-file-apps' can overrule
these default settings.
Note that all this only applies to following "file:" links, and does
not make a difference for, for example, "http:" links.
Rick Moynihan noticed that a function name in an example does not
reflect correctly the purpose of this function, which does skip all
entries that do not have a WAITING tag.
This patch renames the function to remedy this situation.
Org-mode does sometimes included CSS definitions directly
into an exported XHTML file. To pass validation tests
for XHTML, these sections need to be wrapped in
order to pass as CDATA, not PCDATA. This patch
(written by Sebastian Rose) does implement this change.
It also fixes some typos.
On 28 Oct 2008, Eric Schulte wrote:
> Hi Charles, The patch looks great, I vote we drop it 'as is' into
> org-plot.el. The only enhancement that comes to mind would be to
> expose the `time-ind' variable as a plot option. Allowing users to
> specify different time formats, but really if they're that
> sophisticated in their use of gnuplot, then they can do that on their
> own through the `set:' option. Thanks for the addition! -- Eric
If I understand you correctly, then what we want to expose is the
"timefmt" that is put into the data file and then passed to gnuplot.
The following patch is a complete one against current which adds this
(it works for me, at least), and documents the new +PLOT option
behavior.
The one thing I'm not sure about is my method of passing the timefmt
parameter all the way into the temp file creation function. I made a
buffer-local variable there to do it. That seemed the least intrusive
way to accomplish this, but it seemed like poor practice. Thoughts?
You know, I really ought to allow a person to customize this variable (I
mean, using customize).
------------------------------------------------------------------------
Changes in origin/master
Modified doc/org.texi
C-c C-c still works with the cursor in a headline,
but I wanted a special binding as the default, mainly
in order to be able to set tags in a remember buffer.
This used to be Einstein's quote, but this is already in use for
demonstrating #+BEGIN_QUOTE. I've picked up AlexSchroeder's Haiku
as found here: http://www.emacswiki.org/cgi-bin/wiki/EmacsHaiku
trees that are marked with the ARCHIVE tag and even archive files
can now temporarily be included into an agenda view.
Press `v' in the agenda to get trees with ARCHIVE tags.
Press `C-u v' to get archive files included.
This only lead to a contributed file, this is neither robust nor fast.
But maybe throwing the existing code into a contrib file
will make someone come up with an idea.
The #+STARTUP etc lines that define settings on a per-file
basis can now be collected in a separate file and included
with a line:
#+SETUPFILE: "/path/to/setup.org"
This has been a frequent request in the past, now it is
finally possible.
These are implemented as part of plain lists, so a leading
"-" or "+" is still needed. Maybe this is not the most pretty
implementation, but it works without rewriting the quite
complex list formatting code. So all the list formatting
continues to work just fine. The description tag
is highlighted in bold, so still easy to spot.
The HTML exporter does export these already, the LaTeX
exporter still needs to be adapted.
Clock-related markers and agenda markers used to get lost
when editing a file using cut and paste. Now some cut
and past operations move the markers with them. In particular,
structure editing like moving subtrees up and down.
Also, when exiting a remember buffer with a running clock, the clock
can now be moved along with the entry to the target location.
Recently clocked tasks are now remembered as well as a default
task and an interrupted task.
There is no automatic clock-in yet.
Also, a number of bug fixes have sneaked into this patch,
sorry for the mess.
You can slice a single table full of calculations in different ways
into separate destinations. Or you can format the table differently.
There are many fun and exciting possible uses.
A fancier implementation would scan the document *once* for the
set of destinations. That could help implement another function
to update all destinations from all sources.
Refactor orgtbl-to-generic; explicitly separate heading from body.
Support last-line specializers.
Allow functions for some orgtbl parameters.
Add a :remove-nil-lines parameter to orgtbl-to-generic.
This is a new display mode in the agenda view. It appends a clock
table to the daily/weekly agenda view that covers clocked time
for the time span shown in the agenda, and also limited to the
files that were used to create the current view.
The default is now taken from the entry at point or the first
entry in the agenda, an can originate from a property, from
a #+COLUMNS line, or from the variable `org-columns-default-format'.
Carsten Dominik
Stephen Eglen
Julien Danjou
Eric Schulte
Tom Dye
Dan Davison
Bastien Guerry
Christian Egli
Tassilo Horn
Jan Böcker
Bernt Hansen
James TD Smith
John Wiegley
Charles Sebold
Carsten Dominik
Philip Rooke