David Maus writes:
> When `org-previous-item' is called on an item with nothing above it
> Orgmode enters an infinite loop. The reason is that
> `org-previous-item' searches for non-empty lines by moving point up
> line by line and if there is nothing above an item point gets stuck on
> begin of buffer.
>
> example.org
> ,----
> |
> | - Item
> `----
>
> Move point on Item, M-x org-previous-item RET and Orgmode enters the
> infinite loop.
>
> Attached patch adds a conditional clause to `org-previous-item' that
> leaves the search loop if point reaches beginning of buffer.
Daniel S. Sinder writes:
> Here's an "odd" problem when I call org-archive-subtree with a
> prefix argument. It seems that DONE subtrees are not found if
> I'm using odd level headlines. I've tried this minimal test
> case:
>
> ---- begin: test case 1 ----
> #+STARTUP: hidestars odd
>
> * DONE Project 1
> *** DONE Task 1.1
> *** DONE Task 1.2
> ---- end: test case 1 ----
>
> If I put the cursor on the level-1 headline and do C-u C-c C-x
> C-s, I am not prompted if I want to archive the level-3 children.
> However, if I remove 'odd' from the STARTUP line and move the
> level 3 headlines to level 2, so I have this:
>
> ---- begin: test case 1 ----
> #+STARTUP: hidestars
>
> * DONE Project 1
> ** DONE Task 1.1
> ** DONE Task 1.2
> ---- end: test case 1 ----
>
> then a repeat of the same command (C-u C-c C-x C-s) correctly
> asks if I want to archive the two level-2 headlines.
>
> I've removed my personal customizations and the problem does not
> go away.
Paul Griepentrog writes:
> Every once in a while I use org-mode in a buffer that is not
> associated with a file... and then org-goto gets confused. To repeat:
>
> BUFFER-NO-FILE
> ---------------
> * One
> - a
> * Two
> - b
> ---------------
>
> M-x org-mode
> C-c C-j
> org-get-refile-targets: Wrong type argument: stringp, nil
>
> [...]
>
> This patch fixes it:
Julien Barnier writes:
> I recntly noticed that in some specific cases, the final '}' was
> esacped when exproting an emphasis element to LaTeX.
>
> For example, the following element :
>
> /aa/
>
> Is exported to :
>
> \emph{aa\}
>
> This does not append if the string begins with a space or if it
> is ASCII-only. For example, the followig strings are exported
> correctly :
>
> /aaa/
> //
>
> I don't understand why the problem only occurs with non-ASCII chars,
> but I think that the regexp to protect added special chars in the
> org-export-latex-fontify function is missing a '?' in the
> beginning. Tha attached patch corrects it.
Bernt Hansen writes:
> ,----[ test.org ]
> |
> | * Main task
> | ** DONE Task 1
> | ** DONE Task 2
> | ** TODO Task 4
> | ** TODO Task 3
> | ** TODO Task 5
> | * Next task
> `----
>
> Put the point on * Main Task
> C-x n s to narrow to subtree
> C-c C-v to show active TODOs
> Put point on TODO Task 4
> M-down arrow
> M-up arrow
>
> generates
>
> Debugger entered--Lisp error: (error "before first heading")
Nicolas Girard writes:
> My point was, in the following two examples, the empty lines right
> before "C" should be preserved in the LaTeX output.
>
> Cheers,
> Nicolas
>
> #===
> - A2
> - B2
>
> C
> #===
>
>
> #===
> - A3
> - B3
>
>
> C
> #===
Add a variable org-complete-tags-always-offer-all-agenda-tags, which makes org
complete all tags from all agenda files if non-nil. Usually, setting it
locally to t in org-remember buffers is most convenient.
Avoid closing the currently clocking entry when clocking in the same task
again. Leave the clock entry open until some other task is clocked in.
This allows us to clock in tasks with hooks that are called frequently without
generating lots of short sequential clock entries for the same task.
Patch by Bernt Hansen.
Modified by Carsten
Scot Beker writes:
> I cite my references in org like
> this.\autocite[231]{bibtexkey_2009}, where '231' is the
> relevant page number. When exporting to LaTeX, Org thinks
> that the value in square brackets is a footnote number and
> produces a document with a "footnote definition not found:
> 231" error message at the bottom of the document. My
> settings are below, and I've searched pretty hard through
> them to look for anything that might have caused it. Any
> ideas?
Lukas Stelmach writes:
> Isn't it wrong when a note like this:
>
> * A very interesting meeting 11:15-12:00
> <2009-11-30 Mon>--<2009-12-01 Tue>
>
> Shows up in the agenda time gird only on monday while being untimed on
> tuesday? To make it right I do
>
> * A very interesting meeting
> <2009-11-30 Mon 11:15>--<2009-11-30 Mon 12:00>
> <2009-12-01 Tue 11:15>--<2009-12-01 Tue 12:00>
>
> or simply
>
> * A very interesting meeting 11:15-12:00
> <2009-11-30 Mon>
> <2009-12-01 Tue>
>
> Which works but doesn't show the recurrence counter.
Ian Barton writes:
> I am not sure if this is intended behaviour or not.
> If I start a new document with no headings and type:
>
> - item 1
>
> then press M_Ret, I get:
>
> - item 1
> *
>
> If my document is like:
>
> * Heading
> - item 1
>
> M-Ret works as expected.
If there was a title set for a column, org-agenda-colview-summarize would look
for the title instead of the property, resulting in empty summaries. This is now
fixed.
All the colors used now relate on the color wheel. The blues have been
shifted to 15% less saturation than greens, and reds are shifted to 10%
greater saturation. The colors are very close to what was there before,
but now they harmonize much more closely.
Francesco Pizzolante writes:
> Exporting multiple references to the same footnote to LaTeX lead to a wrong
> generated code.
>
> The following example:
>
> --8<---------------cut here---------------start------------->8---
> * Title
> This is my text[fn:1:This is my footnote.]. And another one[fn:1].
> --8<---------------cut here---------------end--------------->8---
>
> Will produce the following LaTeX code:
>
> --8<---------------cut here---------------start------------->8---
> \section{Title}
> \label{sec-1}
>
> This is my text\footnote{This is my footnote. }. And another one\$$^{1}$\$.
> --8<---------------cut here---------------end--------------->8---
>
> The correct code should be:
>
> --8<---------------cut here---------------start------------->8---
> \section{Title}
> \label{sec-1}
>
> This is my text\footnote{This is my footnote. }. And another one$^{1}$.
> --8<---------------cut here---------------end--------------->8---
Bernt Hansen writes:
> When org-agenda-diary-file is set to a special org file for diary
> entries and transient mark mode is enabled 'i' in the agenda fails
> with 'mark is not active now'
>
> My workaround for this is C-SPC to set the mark anywhere legal in the
> agenda display (ie not on the first or last line) and then hit 'i'
> to insert my diary entries.
Matt Lundin writes:
> The new org-agenda-diary-entry looks quite convenient.
>
> Would it be possible to add an option to bypass the date tree so as to
> add each new appointment as a simple first level heading? I prefer to
> keep my appointments organized by project and/or category and have no
> real use for the date tree. Ideally, new appointments would appear as
> first level headlines in the org-agenda-diary-file (i.e., my inbox),
> ready to be refiled.
Bernt Hansen writes:
> The org-agenda multi-occur search command (C-c a /) does not return
> results on buffers that are currently narrowed if the search would
> normally match outside the narrowed region. This prevents possible
> matches from being displayed.
Sebastian Rose writes:
> * This is how it works:
>
> Each project in `org-protocol-project-alist' may now have a new
> element `:rewrites'. `:rewrites' is a list of cons cells, that maps
> regular expressions to relative paths.
>
>
>
> * Example:
>
> (setq org-protocol-project-alist
> '(("http://fairposter.de/"
> :base-url "http://example-web-shop.de/"
> :working-directory "/path/to/working/directory/"
> :online-suffix ".php"
> :working-suffix ".php"
> :rewrites (("example-web-shop.de/cars/" . "products.php")
> ("example-web-shop.de/$" . "index.php")
> ))
>
> ;; .... more projects here
> ))
>
>
> Today, if I visit http://www.example-web-shop.de/, the URL would
> not match a path to any of the files below my working directory.
>
> Tomorrow, /path/to/working/directory/index.php is opened, because there's
> a matching rewrite.
>
>
> Today, a rewritten URL like
> http://example-web-shop.de/cars/lamborghini/Gallardo_LP560-4_MY09
> would not match a path to any of the files below my working
> directory, because URLS like `..../cars/' would be rewritten on the
> server and served through http://example-web-shop.de/products.php.
>
> Tomorrow, that URL will be mapped to
> /path/to/working/directory/products.php, because there's a matching
> rewrite defined.
David Maus writes:
> By accident I noticed that if you clone a subtree using C-c C-x c who
> or whose content is the last line of the file orgmode inserts the
> clone without the desired newline.
>
> example.org
> ,----
> | * Just a test
> `----
>
> If you move the point behind test and press C-c C-x c 1 <RET> <RET>
> the clone is inserted right behind "test".
>
> example.org
> ,----
> | * Just a test*Just a test
> `----
>
> Instead orgmode should insert a newline before inserting the clone
> when the file misses an empty line at the end.
Samuel Wales writes:
> I find that changing a task from a todoish state to blank
> causes blocking to occur. I normally want all todo state
> changes except those to doneish states to be non-blocked.
>
> I think the issue might be that blank is special-cased, as
> if it were a doneish state. I would prefer blank to be a
> todoish state just like any other.
Make org-agenda-columns-summarize work properly with the new summary types.
It was assuming the values should be summarised by adding them together. It's
now updated to use the summary functions in org-columns-compile-map, and also
handles summary types with calculated values properly.
Leave calculated columns blank if there is no underlying value.
Don't return zero if a property is missing.
Changes are also applied to xemacs colview.
Exporting drawers was not really supported, now it is.
Drawers that are selected for export are formatted using the function
specified in the variable `org-export-format-drawer-function'. If
that is nil, the default `org-export-format-drawer' will publish the
drawer as a colon example, i.e. verbatim and in fixed-width.
Sebastian Rose writes
> 1. Open an *.org file you can export to PDF. Ensure the file is not
> located where your Org-mode sources are (org-*.el files). Choose a
> file, that includes some images or a SETUPFILE using relative
> paths.
> 2. M-x default-directory RET
> to see the value of that variable in the current buffer.
> 3. C-c C-e p
> to export to PDF and verify it works.
> 4. C-c C-x !
> to `org-reload'
> 5. Now repeat steps 2 and 3. Note, that the export fails.
Sebastian also submitted the basic patch to fix this
Sebastian Rose writes:
> The following code does not work as expected, when exported to PDF:
>
> => --->8----------------------------->8----------------------------->8---
> * Image basics
>
> Images are inserted into an Org file in a fashion similar to links:
> : [[file:///home/sebastian/develop/org/org-mode-unicorn.png]]
>
> <= ---8<-----------------------------8<-----------------------------8<---
>
> Result:
>
> The last line is exported as:
>
> \href{file:///home/sebastian/develop/org/org-mode-unicorn.png}{nil}
>
>
> Expected result:
>
> I expect the last line to be exported as fixed width text.
>
Saving the edit buffer is achieved by calling org-edit-src-exit,
saving the org buffer and returning to the edit buffer with
org-edit-src-code. When those two functions are used in this context,
they should not attempt to restore the saved window configuration, nor
alter the saved window configuration.
Eric Fraga sent this test file:
> * Problem with underscore (subscript) in emphasised text.
> 1. Design for CO_2 capture.
> 2. The paper /Design for CO_2 capture/ is very interesting.
> 3. This item is combined with the previous and the previous is
> actually formatted wrongly.
> 4. This item seems to come out just fine.
Rick Moynihan writes:
> I'm wondering if anyone logs rescheduled tasks with org-mode... As I
> find myself sometimes scheduling tasks for a future date, but then on
> the day not having the capacity to do them. In these situations I
> just reschedule them, but it'd be nice to record the dates for which
> an item was originally scheduled in the LOGBOOK.
>
> Has anyone configured org-mode to do this? lognotedone only appears to
> log state changes (rather than schedule/deadline changes).
Martin G. Skjaeveland writes:
> Then I write
>
> some text some text ~<<some_scr_block_name>>~.
>
> because I want "<<some_scr_block_name>>" written as verbatim in my latex
> export, I get, in latex,
>
> \texttt{\textbackslash{}label\{some\_src\_block\_name\}some\_src\_block\_name}.
>
> which gives me the text
>
> \label{some_src_block_name}some_src_block_name
>
> in verbatim.
This lets you see how long has passed since the specified timestamp property
each entry. The three operators (@min, @max, @mean) show either the age of the
youngest or oldest entry or the average age of the children.
Alessandro Paccacio writes:
> I've an outline like this:
>
> * Project A
> ** TODO Task A-1 [0/3]
> *** TODO Subtask A-1-a
> *** TODO Subtask A-1-b
> *** TODO Subtask A-1-c
>
> where level 1 heading is the name of a project, level 2 heading is a
> generic task broken into three level 3 headings. As suggested in
> section 5.5 of the manual, I've hooked the org-summary-todo function
> to org-after-todo-statistics-hook, in order to automatically change
> the level 2 TODO to DONE when all the subtasks are DONE.
> Unfortunately, when I change to DONE the first subtask, an unexpected
> TODO is added to level 1 heading:
>
> * TODO Project A
> ** TODO Task A-1 [1/3]
> *** DONE Subtask A-1-a
> *** TODO Subtask A-1-b
> *** TODO Subtask A-1-c
>
> From now on, the switch TODO->DONE or DONE/TODO applies to level 1
> heading, even if the [/] cookie in level 2 is correctly updated:
>
> * DONE Project A
> ** TODO Task A-1 [3/3]
> *** DONE Subtask A-1-a
> *** DONE Subtask A-1-b
> *** DONE Subtask A-1-c
>
> Is there a way to apply the automatic change of TODO to the parent
> heading only, as below?
>
> * Project A
> ** DONE Task A-1 [3/3]
> *** DONE Subtask A-1-a
> *** DONE Subtask A-1-b
> *** DONE Subtask A-1-c
Martin Skjaeveland writes:
> Hi all,
>
> when I import the file
>
> --8<---------------cut here---------------start------------->8---
> -----------------
> | grandmother |
> =================
> | sim:Jackeline |
> | sim:Mona |
> -----------------
> --8<---------------cut here---------------end------------->8---
>
> using the command
>
> #+INCLUDE "grandmothers.txt" example
>
> and export to latex it turns into
>
>
> \begin{verbatim}
> -----------------
> | grandmother |
> \texttt{===============}
> | sim:Jackeline |
> | sim:Mona |
> -----------------
> \end{verbatim}
>
>
> I would like to remove \texttt{ }. I have tried different export
> option settings, but I can't make it work.
>
This bug resulted from a recent patch which made a prefix arg of 2 to
mean refile to the clock. However, I forgot to actually test the
value of the prefix arg...
Chris Randle writes:
> I've just noticed that creating a sparse tree with `C-c / r' is
> not displaying matches in my org file. It hasn't always been this
> way, I *think* things were working OK around 6.29, but it's hard
> to be sure.
>
> I've managed to pare my org file down to a few lines that
> demonstrate the problem
>
> ===============================
>
> * Customers
> ** Customer A
> *** Billing
> **** Support during September :ARCHIVE:
> ** Customer B
> 07964-xxxxxx
>
> *** Problem with Laptop
> ** Customer C
> *** Current Details
>
> *** Test of 07968 showing up
> ** Customer D
> 01673-xxxxxx
> 07968-xxxxxx
>
> *** Laptop slowdown fix
> spoolsv.exe at 99%
>
> ===================================
>
> Setting a sparse tree by regexp 0796[48] returns "3 match(es) for
> regexp 0796[48]", but the tree doesn't expand at the hit
> locations. If I manually expand the tree at the locations of the
> hits, the results are highlighted. It makes no difference if the
> hits are in a headline or in notes beneath a headline.
>
> Remove the ARCHIVE tag from the "Support during September"
> headline with `C-c C-x a' and redo the sparse tree. Everything
> now appears expanded as I'd expect.
Hmm, maybe the outline behavior of hide-subtree has changed???
Anyway, we now just use our own function for this.
Adam Spiers writes:
> The code for handling %^{PROP}p in org-remember templates seems to
> have a bug:
>
> ((equal char "p")
> (edebug)
> (let*
> ((prop (org-substring-no-properties prompt))
> (pall (concat prop "_ALL"))
> (allowed
> (with-current-buffer
> (get-buffer (file-name-nondirectory file))
>
> Here get-buffer can return nil, in which case `org-remember' fails
> with the error:
>
> Wrong type argument: stringp, nil
>
> It seems to be assuming that the non-directory part of the filename
> corresponds to the buffer name, but this is not guaranteed. Perhaps I
> noticed it because I am using uniquify.el ?
RET will only do this if the cursor is on the link and
`org-return-follows-link' is set. `C-c C-o' will work anywhere in the
line.
Requested by Chris Leyon.
With these changes, if org-src-preserve-indentation is non-nil, or if
the block has a -i switch, then the behaviour of org-exp-blocks is
altered as follows:
1. Indentation is not removed before passing the block contents to the
block-transforming plugin.
2. The result returned by the plugin is not re-indented.
The following keys now do archiving
C-c C-x C-a archive using the command specified in
`org-archive-default-command'
This variable is by default set to `org-archive-subtree', which means
arching to the archive file.
The three specific archiving commands are available through
C-c C-x C-s archive to archive file
C-c C-x a toggle the archive tag
C-c C-x A move to archive sibling
These bindings work the same in an Org file, and in the agenda.
In addition:
- In the agenda you can also use `a' to call the default archiving
command, but you need to confirm the command with `y' so that this
cannot easily happen by accident.
- For backward compatibility, `C-c $' in an org-mode file, and `$' in
the agenda buffer continue to archive to archive file.
Dan Davison writes:
> If a file contains "-1" followed by a newline and nothing else,
> org-table-import on that file fails. The first commit with this
> property is a commit (below) to do with CVS tables made a few
> days ago. I have given up trying to work out a good solution to
> this :) In case it is useful, the failure occurs when
> org-table-align is called at the end of
> org-table-convert-region. I think it is long-standing behaviour
> that hitting tab inside of
>
> |-1|
>
> doesn't make a table containing "-1", so presumably there is
> something different about the context in which org-table-align is
> now being called.
Daniel Hackney writes:
> When attempting to use radio lists for exporting in LaTeX, I
> found that they didn't work. I am using the example file shown
> below:
>
> ---BEGIN_EXAMPLE---
>
> #+LaTeX: % BEGIN RECEIVE ORGLST programs
> #+LaTeX: % END RECEIVE ORGLST programs
>
> #+ORGLST: SEND programs org-list-to-latex
> - Emacs text editor
> - Ubuntu Linux
> - Git version control system
> - Firefox web browser
> - Drupal content management system
> - Subversion version control system
> - Eclipse integrated development environment
>
> ---END_EXAMPLE---
>
> I eventually ran `org-list-send-list' manually on the list, and
> got the following error:
>
> funcall: Wrong type argument: number-or-marker-p, (unordered
> #("Emacs text editor" [snip...]
>
> I started debugging `org-list-send-list' and found that the error
> occurred when calling (funcall transform list). Looking back, I
> saw that `transform' was assigned (in the let*) after
> `item-beginning'. Stepping through the execution, I saw that
> `transform' was being assigned a value of `-'. It turns out when
> assigning to `item-beginning', (org-list-item-beginning) is
> called, which runs a regular expression with a capture group,
> overwriting the previously matched capture group.
>
> Luckily, the fix is simple; all that needs be done is to switch
> the assignment to `transform' with `item-beginning' so the regex
> in (org-list-item-beginning) doesn't override the match-string
> data. I tried this fix out and it worked perfectly.
Brenton Kenkel writes:
> I found an apparent minor bug with links containing quotation marks in
> LaTeX export. If the first character in the name of a link is a
> quotation mark, it is converted to a closing mark rather than an
> opening mark. For example:
>
> ,----
> | * test
> |
> | [[http://www.google.com]["hello"]]
> | [[http://www.google.com]["two" "quotes"]]
> `----
>
> This produces:
>
> ,----
> | \href{http://www.google.com}{''hello''}
> | \href{http://www.google.com}{''two'' ``quotes''}
> `----
John Wiegley writes:
> In `org-id-update-id-locations', it uses the value of
> org-id-extra-files and calls file-truename on all its members,
> assuming them to be filenames.
>
> However, my `org-id-extra-files' is the symbol
> `org-agenda-text-search-extra-files', which contains the symbol
> `agenda-archives'. I get an error because Org is calling
> file-truename on that symbol. This stops me from doing "id"
> based link lookups within archive files.
These changes provides frame / window management preferences for the
edit buffer generated using C-c ' on a source code block. Preferences
are specified by a new variable org-src-window-setup, which is based
on org-agenda-window-setup and has the same four options:
current-window, other-window, reorganize-frame, other-frame. These
behave as follows:
* current-window
The edit buffer appears in the current window.
* other-window
`switch-to-buffer-other-window' is used to switch to the edit buffer
in the same frame.
* reorganize-frame [default]
The current frame is reorganized so that it is split between the
source code edit buffer and the parent org buffer.
* other-frame
The edit buffer appears in a new frame. That frame is deleted when
exiting the edit buffer with C-c '.
In org-edit-src-save, point and mark were being restored inside the
save-window-excursion. As it happens, although mark is lost, point
nevertheless retained its position with switch-to-buffer being used to
switch between org and edit buffers, as is currently the
case. However, the failure to restore point correctly is exposed if
more complex options controlling window and frame management are
provided for the edit buffer.
Richard Moreland writes:
> (setq org-agenda-custom-commands
> '(("X" agenda "" nil ("agenda.html"))))
> ;; This seems to break org-mobile-push?
> ;;(setq org-agenda-exporter-settings
> ;; '((org-agenda-add-entry-text-maxlines 5)
> ;; (htmlize-output-type 'font)))
>
> I have the lines above in my .emacs file. When I uncomment the 3
> commented lines, org-mobile-push just hangs after OVERVIEW.
>
> I don't understand exactly what is going on, but if I hit C-g or
> C-c enough I can regain control, but the sync never finishes.
Kai Tetzlaff writes:
> i noticed that when using the org-mode clock persistence, the
> stored clock data gets deleted when i start emacs and exit again
> without turning on org-mode in between.
>
> When looking at org-clock-persistence-insinuate it looks like
> org-clock load will only run after org-mode gets started whereas
> org-clock-save will always be called when exiting emacs:
>
> (defun org-clock-persistence-insinuate ()
> "Set up hooks for clock persistence"
> (add-hook 'org-mode-hook 'org-clock-load)
> (add-hook 'kill-emacs-hook 'org-clock-save))
>
> Not running org-mode-hook (i.e. not starting org-mode) thus does
> not load clock data but org-clock-save overwrites any prviously
> saved data when exiting emacs.
>
> An easy fix for that would be to just add org-clock-load to e.g.
> emacs-startup-hook. But this will only work if the code in
> org-clock-load does not depend on any org-mode initialization
> code (or would require loading org-mode).
>
> So org-clock-save should probably check if org-clock-load has
> been running during the current emacs session (or if clock
> persistence was just enabled) and only then save clock data when
> exiting emacs. I tried to add this to the code in org-clock-save:
Now the recommendation is to use clock persistence only for the
history, and to use John's code for resolving a clock that has been
idle (either because the user stopped working or exited Emacs).
This happens regardless of types and presence of source-code blocks
in the buffer. Previously interblocks were only exported when
source-code blocks of the same "type" were present in the org-mode
buffer. This decision was placed around the assumption that
exporting small inline non-block objects only made sense in the
presence of some related block type. This assumption is
artificially limiting and is now removed from org-exp-blocks.