When the agenda buffer for an agenda series is created, this was so
far done without the options of the custom agenda command in place.
This meant that some options would not take effect, because the only
place where that did would have an effect was during creation of that
buffer.
This commit makes sure that the global options of an agenda series are
in fact in place when the buffer is created.
This commit changes which time is shown in the mode line while
clocking. Normally this will now be the total time ever clocked on
this task and its children.
However, when the task is a repeating one, only the time since the
last reset of the task will be shown. The time of the last reset is
now recorded in a LAST_REPEAT property.
You can also set the CLOCK_MODELINE_TOTAL property to the value
"current" to only show the current clocking instance. Or it may be
the value "today", to only add up the time spent today on this task.
Other possible values are "repeat", "all", or "auto".
Finally, you can set your default for this property with
`org-clock-modeline-total'.
The content of blocks like #+begin_example will be marked with a
separate face. That same face is also used for single lines
introducing text for specific backends.
This commit introduces two new variables:
- org-treat-insert-todo-heading-as-state-change
Default is nil. When set to t, adding a new TODO item will be done
by adding an item and the executing an "official" state change which
potentially will trigger state logging.
- org-treat-S-cursor-todo-seletion-as-state-change
Default is t. When set to nil, selecting a TODO state with
S-left/right will not trigger logging, only selecting a new state
with `C-c C-t'. I actually like this a lot and would even consider
making this the default.
Nicolas Goaziou writes:
> As I was saying in anoter post, it looks like there's something
> weird happening when using C-k in agenda view:
>
> 1. Create two new remember entries (i.e. test and test2) with the
> same tag (I used @office)
> 2. Narrow down the agenda view to only see the @office entries.
> 3. Kill the last but one entry (it should be "test") : both of
> "test" and "test2" disappear frow the view. Actually, "test2" is
> not properly killed, but it is scary nonetheless.
>
> It only happens with two last entries.
>
> Is anyone able to reproduce this ?
All export commands now push the result to the kill ring by default.
This is subject to the variable `org-export-push-to-kill-ring'.
Also, this commit adds a new variable
`org-export-show-temporary-export-buffer' which can be used to turn
off the display of the temporary buffer containing the exported text.
Since this stuff is now automatically pushed onto the kill ring, some
people might prefer not to see this buffer.
Mikael Fornius writes:
> This is my suggestion of an implementation of min/mean/max computation
> in columnview summaries. If you like it feel free to use it.
>
> New operators: {min}, {max} and {mean} possibly prefixed with : for use
> with timevalues.
>
> Example from my running exercise diary:
>
> #+COLUMNS: %DISTANCE{+;%.1f} %HEARTRATE{mean;%.1f} %SPEED{:min} %CALORIES{+}
>
> Gives a colview with summaries:
>
> total distance, mean heartrate, fastest speed (min/km) and total
> calories.
>
> I have tested it on emacs-23 and it works well for me now, also with the
> interactive colview functions.
>
> But you never know really. ;-) Anyway, there should not be any emacs-23
> specific elisp code added afik.
>
> (Because I do not use xemacs I have not tested it with xemacs but the
> small changes I made should be compitable to both xemacs and emacs. I
> would appreciate if someone on this list who uses xemacs will give it a
> try for me. Thanks!)
>
> (This fix also opens up for using user defined lisp functions to
> calculate colview summaries, but I am not sure if that is something
> useful. Like this:
>
> (defun std (&rest values)
> "Compute standard deviation."
> ...)
>
> #+COLUMNS: %DATA{eval:std}
>
> If someone finds this attractive it would now be easy to implement as well.)
>
Setting the new option `org-hierarchical-todo-statistics' to nil will
make TODO statistics to be computed recursively. This means, not only
the direct children of a node contribute to its TODO statistics, but
the entire subtree.
You can also set the COOKIE_DATA property and add the word "recursive"
there to get recursive statistics for a specific tree.
Publishing a project with prefix argument to
force publishing was broken. Actually, the entire interactive side of
this function was implemented badly. Fixed now.
Hsiu-Khuern Tang writes:
> Hi Carsten,
>
> You recently changed org-edit-src-code to use a separate buffer
> instead of an indirect buffer. One side effect of this is that I
> can no longer edit several code examples at the same time:
> opening the second buffer will silently discard any changes made
> in the first. I would prefer this behavior: when opening the
> second edit source buffer, write any changes in the first buffer
> to the originating Org buffer (but don't save it, of course).
>
> Another approach is to use different buffer names.
The better approach is clearly to allow several buffers, now
implemented with this commit.
Harri Kiiskinen writes:
> There is an elusive bug in the ICal export functions. To
> demonstrate it, open this file, allow for the use of the local
> variable, and run 'org-export-icalendar-this-file'. What I get is
> the message "Wrong type argument: stringp, nil"
>
> -----------------------------
> #+FILETAGS: test
> * TODO header
>
> # Local Variables:
> # org-use-tag-inheritance: "^[t]"
> # End:
> -----------------------------
>
> Now, the funny thing is, that if you change the filetag from
> "test" to "est", close the file, and open it again, the file will
> be exported fine! It seems, that if the filetag does match the
> regular expression in org-use-tag-inheritance, then the result is
> error.
This bug was due to a missing save-match-data around a call to
org-get-tags-at. However, when studying this bug it turned out
that explicitly checking for the archive tag is not needed,
because we already have a call to `org-agenda-skip' in the same
loop.
Peter Frings writes:
> Good day, org-ers
>
> I have seen a *small* problem in the Agenda's log mode.
>
> Org-mode version 6.26d
> GNU Emacs 22.3.1 (i386-apple-darwin9.5.0, Carbon Version 1.6.0) of 2008-11-01
>
>
> I have this in time-sheets.org:
>
>
> * Project AI
> ** Enhancement PT <2009-04-30 Thu 10:00-11:00 +1w>
> CLOCK: [2009-05-14 Thu 09:55]--[2009-05-14 Thu 10:45] => 0:50
>
>
> But, the Agenda shows this:
>
> Day-agenda (W20):
> Thursday 14 May 2009
> 9:00...... ----------------
> planning: 9:12- 9:55 Clocked: (0:43) BUSY Notifications
> time-sheet: 10:00-11:00 Clocked: (0:50) Enhancement PT
> time-sheet: 10:00-11:00 Enhancement PT
> 10:00...... ----------------
> 11:00...... ----------------
>
He is right. Progress lines should never take their
time from the headline, always only from the triggering line.
Benjamin Andresen writes:
> I was curious as to why a value such log-mode wasn't customizable
> to be run on start-up as follow-mode and clock-report-mode are.
>
> If Carsten thinks this is a good idea, I've attached a patch that
> may shave of 5 seconds of him adding it. It applies cleanly to
> current git HEAD.
This commit applies Beanjamin's patch
There is now a new export function, `org-export-as-org', which
basically creates a copy of the Org file with things like archived
trees, commented trees, and trees deselected by export tags,
stripped.
This commit adds:
{{{date(FORMAT)}}} current date/time, formatted with
`format-time-string'
{{{modification-time(FORMAT)}}} date/time of last modification of
file, formatted with `format-time-string'
{{{input-file}}} the file name of the source Org file.
entries.
Guy Wiener writes:
> Hello everyone,
>
> I use orgmode to write down TODO tasks with dependencies (using
> org-enforce-todo-dependencies). I want to export the tasks to an
> iCalendar file, but *without* the blocked tasks (i.e, tasks that have
> unfinished dependencies). The agenda view hides these tasks if you set
> org-agenda-dim-blocked-tasks. It there a way to configure the
> iCalendar export to ignore these tasks too, like in the agenda view?
This commit implements this, when the value of
`org-icalendar-include-todo' is the symbol `unblocked'.
The commit implements a general mechanism for providing special
(e.g. completion) support for specific link types when entering links
with `C-c C-l'. After calling `C-c C-l', you may now press RET after
inserting a link prefix, and Org will look for a function
`org-PREFIX-complete-link'. Such functions may be defined for any
link types, including link abbreviations. Currently, Org has
`org-file-complete-link' for file name completion, and
`org-bbdb-complete-link' for completion of record names from BBDB.
Peter Westlake writes:
> On Fri, 8 May 2009 06:24:54 +0200, "Carsten Dominik"
> <carsten.dominik@gmail.com> said:
>
> I anyone could make an example that allos me to reproduce this
> problem, then I might be able to fix it.
>
> It's trivial:
>
> * top
> ** sub 1
> Set org-cycle-include-plain-lists.
> Type TAB on this line, and the whole of top gets folded.
>
> ** sub 2
> This entry is not needed to reproduce the bug. It just
> makes it more visible.
There was indeed a bug, I think it is fixed now.
Shaun Johanson writes:
> Consider the following Org file:
>
> * Test
>
> See [[(foo)][FOOBIE]]
>
> #+BEGIN_EXAMPLE
> <foo>: blah blah (ref:foo)
> #+END_EXAMPLE
>
> Question 1)
> In Org mode the link displays as FOOBIE, in the exported HTML it
> displays as (foo). Is there any way to cause the link to use the
> description (FOOBIE) in HTML? If not would this be a useful option
> to add?
This was a bug, fixed now.
Editing source code examples and pictures is not done in a truly
separate buffer, not in an indirect buffer. Indirect buffers had
caused problems with fontification, for example.
Jason Riedy writes:
> I'm trying to change org-export-latex-image-default-option
> to "width=.7\\linewidth" in a file local variable. It's set
> correctly as a buffer local variable, and it's having no
> effect on the export. My guess is that the buffer-local
> property is stopping it as soon as org-export-as-latex runs
> set-buffer.
>
> I can smuggle the value in by adding an entry to org-export-plist-vars
> referring to org-export-latex-image-default-option and pulling the value
> from the plist, but that feels incorrect.
It is actually the correct way to do this, and I have
implemented this change.
Samuel Wales writes:
> I frequently export to ascii without wanting a file to be created,
> especially not in a useful directory, as the files are temporary.
>
> Is there a way to export ascii to just a buffer?
There is now, `C-c C-e A'.
This commit also implements commands
- org-export-as-ascii-to-buffer
- org-replace-region-by-ascii
- org-export-region-as-ascii
which are similar to what is available for HTML and LaTeX.
`C-c C-e A' used to be the key for publishing all projects.
This functionality has now been moved to `C-c C-e E'.
Scot Beker writes:
> I have org-remember working successfully (I can't believe that it took
> me so long to experiment with it. It has made a huge difference in my
> work).
>
> But if, after calling the extension with C-c r, I type a "wrong" tag
> selector (e.g. I mistype a right one), I get
> (1) the error message 'no template' (good)
> (2) a remember buffer without a bullet point, with the point at the
> very top of the file (sure, what do I expect?)
> (3) but, having realized my mistake, I can't get out of it gracefully.
> I can't abort (C-c C-k), and can't (C-c C-c).
> I get the error message "Args out of range 0, 1"
>
> Any idea whether I've set something up wrong or if org just has no
> mercy on those who can't manage to type one of the selected values?
> Otherwise, org-remember works well.
This situation is now avoided by forcing the selection of a valid
template.
Matt Lundin writes:
> When I select a region and invoke
> org-replace-region-by-latex, the region is removed, but no
> latex output is put in its place. In other words, the region
> is simply deleted.
>
> Strangely, if I select multiple headlines, they are
> converted to latex. But if I select only text underneath a
> headline, it is not replaced.
This is hopefully fixed now.
Alex Mizrahi writes:
> I'm trying to use column view to work with effort estimates, but it
> does not seem to work in XEmacs. When I press C-c C-x C-c columns
> show up in agenda view (I'm not sure if 100% correcly, but
> more-or-less so), but when I try editing anything, column view goes
> away and error appears:
>
> Wrong number of arguments: #<subr local-variable-p>, 1
Chris Gray had the idea to have arbitrary blocks turned in LaTeX
environments and HTML divs. These three new hooks allow
implementation has an add-on rather than a patch.
Thomas Morgan writes:
> I just tried exporting an Org file with LaTeX fragments to HTML
> on a computer that doesn't have dvipng. There were error messages
> in *Messages* ("Failed to create png file..."), but this wasn't
> obvious to me at first glance because those messages were replaced
> in the echo area by "Exporting... done" before I could see them.
>
> So I was wondering, is there a good way to make the user aware of
> those errors? Maybe by printing "Exporting... done (with errors)"?
There is now a better error message when either the latex or the
dvipng program does not exist.
Carsten Dominik writes:
> On Apr 26, 2009, at 12:08 AM, Samuel Wales wrote:
>
> > I noticed the following regarding
> > org-remember-backup-directory:
> >
> > 1) auto-saving does not save contents
> > - solution: put (auto-save-mode 1) before or after (not
> > sure which) the call to org-set-local in the
> > following lines in org-remember:
> >
> > # (expand-file-name
> > # (format-time-string "remember-%Y-%m-%d-%H-%M-%S")
> > # org-remember-backup-directory))
> > # (save-buffer)
> > # (org-set-local 'auto-save-visited-file-name t))
> > # (when (save-excursion
>
> Done.
>
>
> > 2) save-buffer is called before there are any contents
> > - this causes files without useful content to stick
> > around in the dir if the buffer is killed or
> > something.
> > - solution: don't save the buffer; let auto-saving do
> > that work. will this work?
>
> Usually, the template expansion will have filled in stuff like
> links and initial contents, so I would prefer to keep the
> save-buffer here and let the user deal with the extra files.
>
> > 3) if you have auto-save-file-name-transforms set,
> > auto-saving is done according to that variable instead
> > of saving in place.
> >
> > I am now turning that variable off, locally in the remember buffer.
> > Does that fix the problem?
>
> - Carsten
>
> > - solution: is this an emacs bug? i am not sure. the
> > auto-saving should be done in place, saving in
> > org-remember-backup-directory and not saving in the
> > place where the transforms variable tells it to save.
> > perhaps each user can kludge transforms or perhaps
> > emacs needs fixing? i have reached debugging ability
> > limit.
Tassilo Horn writes:
> I have this entry in an org-file.
>
> --8<---------------cut here---------------start------------->8---
> ** bung Grundlagen der Softwaretechnik (B 016) :teaching:
> <2009-04-22 Wed 08:30-10:00 +1w>
> <2009-04-29 Wed 10:15-11:45> (Fr Hannes bernehmen)
> --8<---------------cut here---------------end--------------->8---
>
> I expect it to be displayed every wednesday after 2009-04-22
> for 08:30-10:00 and on 2009-04-29 it should be displayed
> twice: one at the usual time and one for 10:15-11:45.
>
> But the agenda shows only the regular entry (08:30-10:00)
> and omitts the exception. If I reorder the timestamps, so
> that the exception comes first, only the exception will be
> shown on 2009-04-29. Every other wednesday shows the
> regular repeater date.
>
> What do I have to do to make that entry showing up twice on
> 29th April?
This commit adds a new option
`org-agenda-skip-additional-timestamps-same-entry'. When set
to t, an entry that has multiple active time stamps will get
multiple lines in the agenda.
Carsten Dominik