Chris Leyon writes:
> For some semi-short time, org-ido-switchb has been broken, complaining
> about wrong type arguments. The attached one-line patch corrects
> this.
Patch by Chris fixes this problem.
The new variable `org-agenda-search-headline-for-time' also turned off
time searching for diary items as an unwanted side-effect. This
commit makes sure that diary entries are always parsed for a time.
Harri Kiiskinen writes:
> It seems that org-use-tag-inheritance set to regexp, the use of
> #+FILETAGS: and org-todo-list do not work together. It seems, that a
> regexp in org-use-tag-inheritance matching a tag set in #+FILETAGS
> causes this error:
>
> Debugger entered--Lisp error: (wrong-type-argument stringp nil)
> string-match("^ +" nil)
> [...]
> when org-use-tag-inheritance is set to regexp "te"
> with this file:
>
> --------
> #+STARTUP:
> #+FILETAGS: tea
> * TODO testing :test:
> ** TODO too :data:
> -----
>
> When the regexp is "tes", so that the FILETAG does not match,
> org-todo-list produces a correct list.
This is indeed a bug. The all to `org-get-tags-at' does change the
match data if there is a match for the inheritance regexp. This
problem is now avoided by first extracting (match-string 1), and then
getting the tags.
Studying this bug also exposed another one, namely that file tags are
not marked as inherited tags. This is now fixed, immediately when
the #+FILETAGS line is parsed.
Chris Randle writes:
> I have one giant Org-mode file for everything. I frequently use
> `C-c C-x b' to take the current node and show it in a new frame
> with narrow subtree so that I can concentrate on just that region
> of my file. Rather like hoist in GrandView, if anyone remembers
> that.
>
> My Org Manual (6.24b) says "The indirect buffer...will contain
> the entire buffer, but will be narrowed to the current
> tree. Editing the indirect buffer will also change the original
> buffer, but without affecting visibility in that buffer.
>
> I've noticed that, when working in the new frame, changing the
> TODO state of any item within the frame to DONE (when it is the
> currently clocked in item) does not stop the clock. Going back to
> my main frame and doing the same thing there on the same item
> does stop the clock.
>
> I haven't altered `org-clock-out-when-done', and Emacs reports
> its value as t.
This was caused by the fact that markers seem to point to the
base buffer always, so we need to check if the current buffer's
base buffer is equal to the marker buffer.
Chritopher Suckling writes:
> All,
>
> For various reasons (mainly Spotlight and an excess of HTML mail
> send by employers), I've migrated back to Mail.app after some
> time in Mutt (and how I miss the speed and threading).
>
> I habitually flag mails that need attention at a later date, and
> rather than use both org-mode and Mail.app to keep track of what
> needs doing, I've written a couple of hybrid elisp AppleScript
> functions to suck links to my flagged email into org-mode.
>
org-mac-message.el now contains these new functions.
When setting the variable `org-remember-back-directory', each
remember buffer created will now get its own unique file name in that
directory. So if you, by accident, overwrite a remember buffer or
remove it before storing it, there will be a backup.
Items are listed in the agenda sometimes in bright colors, to draw
attention to important tasks or deadlines. When such an item is
switched to DONE, the state change is reflected by the new TODO
keyword, but the line itself might still be bright. Org de-emphasizes
the line by changing the face of the line. It used to change it to
the face `org-done', but now we use a new, independent face
`org-agenda-done'.
When a tags/property match does match an entry and its sublevels, the
sublevels used to be indented by dots, to indicate that the matches
likely result from tag inheritance. This is now no longer the
default, but you can get it back with
(setq org-tags-match-list-sublevels 'indented)
David Maus writes:
> When I start to clock a headline (C-c C-x C-i) that does not have a
> LOGBOOK drawer orgmode inserts one but removes the indentation of the
> first line below the headline:
>
> Example:
>
> * TODO Do something
> Do this, do that etc.
>
> after C-c C-x C-i becomes
>
> * TODO Do something
> :LOGBOOK:
> CLOCK: [2009-03-20 Fr 19:03]--[2009-03-20 Fr 19:03] => 0:00
> :END:
> Do this, do that etc.
Fixed with this commit, a patch written by Peter Jones.
Outline levels below the headline boundary are now treated better, as
proper list. The variable `org-export-latex-low-levels' can now also
be `itemize' or `enumerate', to get the corresponding list structure.
The new default is `itemize', to make it parallel with the behavior in
HTML.
When exporting to a temporary buffer, images to replace LaTeX
fragments cannot be produced, because there is no useful location
where they can be put. Therefore, these images are not produced in
this case.
This commit implements an important change: When, during a
stuck-project search, a project tree is identified as not stuck, so
far the search would continue after the end of the project tree. From
now on, the search continues in the subtree, so that stuck subprojects
can still be identified.
In verse environments, line breaks are now enforced both in LaTeX and
in HTML. Centering is now implemented using a div rather than a
paragraph, so that there may be several paragraphs in the centering
environment. Blockquotes now also may have several paragraphs.
When a note is taken, the new drawer is created before the note is
taken. Now the drawer is removed again if the note gets aborted and
if the drawer is empty.
Anupam Sengupta writes:
> I routinely use time ranges (and occasionally time-stamp ranges)
> in my org files to document the scheduled block of time for a
> meeting or activity. As an example, I will mark meetings as:
>
> * A Meeting
> <2009-03-12 Thu 10:00-11:00>
>
> As often happens with meetings, rescheduling needs to be done and
> I use S-<up> or S-<down> on the time-stamp to make the
> modifications. While this works fine, it usually leads to a
> duplication when the *time* part of the time-stamp needs to be
> changed.
>
> For the same example above, if the time-block has now changed to
> 11:00-12:00, then I need to do S-<up> on both the "10:00" and the
> "11:00" string. I.e,
>
>
> * A Meeting
> <2009-03-12 Thu 11:00-11:00>
> ^
> +---------------- After the first S-<up>
>
> * A Meeting
> <2009-03-12 Thu 11:00-12:00>
> ^
> +---------------- After the second S-<up>
>
> Can we have a feature (with a toggle option perhaps) which would
> *move* the block (i.e., both time entries) by the same amount
> when either one is moved in the same direction. I.e., the
> proposal is to have:
>
> * A Meeting
> <2009-03-12 Thu 11:00-12:00>
> ^ ^
> | |
> | +---------- Automatically shifted
> +---------------- After the S-<up>
This is in fact how changing time works in many applications, and
it does make sense here as well. The commits implements this
change.
It also implements a way to change the start time of an entry from
the agenda. The date is normally changed with S-right/left.
Now, if you add a C-u prefix, the hour will be changed. If you
immediately press S-right/left again, hours will continue to be
changed.
A double prefix will do the same for minutes.
If a link is [[#name][desc]], the href wil be exacty href="#name".
So starting a link target with # will indicate that there will be an
explicit target for this.
Hsiu-Khuern Tang writes:
> If I export the file
>
> --------------------------------------------------
> #+OPTIONS: ^:{}
>
> * test
>
> a_{\alpha}
>
> a_{foo}
> --------------------------------------------------
>
> as HTML, I get "a_{α}" but "a<sub>foo</sub>": \alpha is not
> subscripted but foo is. I was expecting both to be subscripted,
> since they are in {}.
This is a bug, fixed now.
Wanrong Lin writes:
> Suppose I have an org file with following lines:
>
> * Test1
> Test2
>
> Now if I put the cursor at the beginning of the "Test2" line and
> press "M-S-RET" (Alt-Shift-Return on my machine), I got this:
>
> * Test1
> * Test2TODO
>
> The "TODO" keyword was inserted at the end instead of the
> beginning of the task text. This seems a bug to me.
Yes, this is a bug that occurs in the special case when the
heading stars are inserted in front of an existing line. The
commit adds code to make sure the correct position is used.
The default for the sitemap file was "index.org" which is really
terrible because it will overwrite the index.html file. Now the
default is "sitemap.org".
Carsten Dominik
Bastien Guerry