This change provides for better export of named source-code blocks,
with specific support for more attractive html export. The arguments
are included with the source code name, and both the source code name
and code body are wrapped in a div to support styling with css. For
example the following CSS can be used to associate a source-code block
name with it's code body, and to slightly indent the body.
.org-src-container {
border-left: 4px solid gray;
padding: 0.5em 0.5em 0.5em 1em; }
.org-src-container pre {
margin-left: 1em; }
Wes Hardaker writes:
> Attached is a patch that lets local variables define whether or not todo
> dependency blocking should be used (both for TODOs and for checkboxes).
> I have one file in particular that I'm using checkboxes to quickly
> indicate multi-selections from a list but for most of my files I want
> TODOs blocked by uncompleted checkboxes.
>
> Normally org uses hook methods for checking for TODO blocks and this
> patch just inserts a check at the top to test and see if the variable
> turning on the blocking type is still set.
zwz writes:
> I use org-remember for my contact records.
>
> This is a template in org-remember-templates
> ("Contact" ?c "* %^{Name} \n%[~/.contact]\n" "contact.org" "Contacts")
>
> the content of the file "~/.contact":
> :PROPERTIES:
> :Mobile: %^{mobile}
> :Email:
> :Added: %u
> :END:
>
> I found that the prompt "%^{mobile}" works, but *the inactive time stamp "%u"
> does not.* It is not replaced.
>
> I guess it is a bug.
Bill Jackson writes:
> When exporting to LaTeX, curly brackets in a command will be escaped
> if that command also contains angle brackets. This can be a problem
> when using beamer. An example input file:
>
> ------------------------------------------------------------------------
>
> #+LaTeX_CLASS: beamer
>
> * The One and Only Frame
> When LaTeX \alert<2>{commands} contain angle brackets, the curly
> brackets are erroneously escaped in the output. \alert{Commands}
> that do not contain angle brackets work properly.
>
> ------------------------------------------------------------------------
>
> Typing C-c C-e l will generate the output file:
>
> ------------------------------------------------------------------------
>
> % Created 2010-01-15 Fri 13:57
> \documentclass{beamer}
> \usepackage[latin1]{inputenc}
> \usepackage[T1]{fontenc}
> \usepackage{graphicx}
> \usepackage{longtable}
> \usepackage{float}
> \usepackage{wrapfig}
> \usepackage{soul}
> \usepackage{amssymb}
> \usepackage{hyperref}
>
>
> \title{escCurly}
> \author{}
> \date{15 January 2010}
>
> \begin{document}
>
> \maketitle
>
> \begin{frame}
> \frametitle{Outline}
> \setcounter{tocdepth}{3}
> \tableofcontents
> \end{frame}
>
> \begin{frame}
> \frametitle{The One and Only Frame}
> \label{sec-1}
>
> When \LaTeX{} \alert<2>\{commands\} contain angle brackets, the curly
> brackets are erroneously escaped in the output. \alert{Commands}
> that do not contain angle brackets work properly.
> \end{frame}
>
> \end{document}
Bill Jackson writes:
> When exporting to LaTeX, the commands \LaTeX and \TeX are not
> processed consistently. In particular, the backslash for \LaTeX is
> escaped. This might not be a bug, but it is a bit confusing. An
> example input file:
>
> ------------------------------------------------------------------------
>
> * The One and Only Header
> The command \LaTeX generates an escaped backslash, while \TeX and
> \alpha do not. Note that LaTeX is converted to a command, while TeX
> is not.
>
> ------------------------------------------------------------------------
>
> Typing C-c C-e l will generate the output file:
>
> ------------------------------------------------------------------------
>
> % Created 2010-01-15 Fri 13:47
> \documentclass[11pt]{article}
> \usepackage[latin1]{inputenc}
> \usepackage[T1]{fontenc}
> \usepackage{graphicx}
> \usepackage{longtable}
> \usepackage{float}
> \usepackage{wrapfig}
> \usepackage{soul}
> \usepackage{amssymb}
> \usepackage{hyperref}
>
>
> \title{escLaTeX}
> \author{}
> \date{15 January 2010}
>
> \begin{document}
>
> \maketitle
>
> \setcounter{tocdepth}{3}
> \tableofcontents
> \vspace*{1cm}
> \section{The One and Only Header}
> \label{sec-1}
>
> The command \\LaTeX{} generates an escaped backslash, while \TeX and
> $\alpha$ do not. Note that \LaTeX{} is converted to a command, while TeX
> is not.
>
> \end{document}
The coding system of the LaTeX class will now only be set to the value
corresponding to the buffer's file coding system if the class
specifies \usepackage[AUTO]{inputenc}. Any other value for the coding
system will not be modified.
Jan Bcker writes:
> Consider the following situation:
>
> * A
> Some text.
> * B
>
> - Place the cursor on A, press C-x n w (org-narrow-to-subtree).
> - Go to the very end of the buffer and insert "xyz".
> - C-x n w (widen).
>
> You end up with:
>
> * A
> Some Text
> xyz* B
Patch by Stephen Eglen, who writes:
> Just a small suggestion here. In the agenda, an entry like:
> * <2010-01-20 Wed 09:00-09:30> test
>
> gets formatted as follows:
>
> Wednesday 20 January 2010
> 8:00...... ----------------
> test: 9:00- 9:30 test
> 10:00...... ----------------
>
> the leading whitespace before '9:00' and '9:30' is needed to align the
> times, but having the space after the dash looks odd (at least to my
> latex-trained eyes). Would it be possible to patch org-agenda to put a
> leading zero rather than leading whitespace. With this patch, I see:
>
> Wednesday 20 January 2010
> 08:00...... ----------------
> test: 09:00-09:30 test
> 10:00...... ----------------
This patch introduces a new user option to select this behavior.
Stephen Eglen writes
> Within the agenda buffer, if I type 'i j' to jump to the current date I
> get:
>
> Debugger entered--Lisp error: (void-function org-datetree-find-date-create)
> org-datetree-find-date-create((1 20 2010))
> org-agenda-diary-entry-in-org-file()
> org-agenda-diary-entry()
> call-interactively(org-agenda-diary-entry nil nil)
>
> If I then do M-x load-library org-datetree
>
> and repeat 'i j', it works. Should this function be autoloaded?
the progress-marker local variable set inside of a let in
org-exp-blocks is used to constrain searches in org-babel-exp to
ensure that a babel block doesn't overwrite non-babel src blocks
Carsten Dominik
Eric Schulte
Dan Davison