If the heading field in the remember template entry is either `top' or
`bottom', it is now OK to file to a file that is not in org mode, and
the content of the remember buffer is inserted without forcing an
Org-style header.
Rares Vernica writes:
> I think the standard references do not work correctly in the
> "remote" function. Moreover, the "edit all formulas" (C-c ')
> window replaces the internal references with standard
> references. Even if I toggle the references back to internal
> ones, the references in the "remote" function do not get
> updated.
>
> Here is an example:
>
> #+TBLNAME: TableA
> | 101 |
> #+TBLFM: @1$1=remote(TableC,@1$1)
>
> #+TBLNAME: TableB
> | A1 |
> #+TBLFM: @1$1=remote(TableC,A1)
>
> #+TBLNAME: TableC
> | 101 |
>
> If I do C-c * in TableA, it works correctly. In TableB it
> doesn't. If I do C-c ' in TableA and then (with or without
> C-c C-r) C-c C-c and C-c *, then the contents of TableA will
> be equivalent to the ones of TableB and the reference will
> be broken.
Standard references like A1 are now allowed in call to
remote().
Rares Vernica writes:
> I think I found another bug related to remote
> references. When I insert/remove a row/column using the
> table commands, the remote references to other tables are
> also updated. I think org treats "remote" as a regular
> function and updates the references inside it.
>
> Here is an example:
>
> #+TBLNAME: TableA
> | 101 |
> #+TBLFM: @1$1=remote(TableB,@1$1)
>
> #+TBLNAME: TableB
> | 101 |
>
> If I go in the cell of TableA and do M-S-down arrow, I get
> the following:
>
> #+TBLNAME: TableA
> | |
> | 101 |
> #+TBLFM: @2$1=remote(TableB,@2$1)
> ^^^^
>
> As you can see the remote reference has been updated. I
> similar update happens when I remove a row or insert/remove
> a column.
This commit makes sure that references inside calls to
remote() are not touched.
sha1-string is not autoloaded in sha1.el as in the version distributed
with Emacs 22. Instead of relying on autoloads, the sha1 library is
now required by org-feed.el.
When refiling, you can now create new parent nodes on the fly. To do
this, set the variable `org-refile-allow-creating-parent-nodes' to
`confirm'. Then, at a refiling prompt, proceed with completion until
you have an existing heading, and then add "/new heading", i.e. a
slash followed by the new heading. That heading will be created as a
child of the existing heading, and the entry to be refiled will end up
under that new heading.
New wrapper span around keyword plus time stamp, with class
timestamp-wrapper.
.timestamp-wrapper {float: right;}
could be a nice entry in a CSS style file.
Adam Elliot writes:
> Automatically resuming the clock after an Emacs restart
> fails under the following cases:
>
> 1. If org-log-states-order-reversed set to t (default), and
> a state change line precedes the clock line to resume.
> Error message is "Cannot restart clock because task does
> not contain unfinished clock".
>
[...]
> 2. If org-log-states-order-reversed set to nil. Error
> message is the same. Reason: point is placed *after*
> last clock line and so fails looking-at test.
>
This commit fixes the problem, in a slightly different way
than Adam proposed. Instead of trying to fix the old way to
find the position of the clock, we now simple search the
entry if there is an unfinished clock and go there. Since
new clocks are added before older ones, this should be a
safe bet.
Time stamps in LaTeX export now also honor custom time stamp formats.
Furthermore, the new option `org-export-latex-timestamp-markup' can
specify special markup for time stamps.
Some of the standard export options are now defined in backend
specific files. This commit makes sure that building the options
property list will not cause an error because of unneeded (for the
backend) undefined variables.
Samuel Wales writes:
> A lower case version of a todo kw at the beginning of a
> headline, when in lower case, causes sort to ignore the
> word.
>
> Also, setting priority with shift down causes the cookie to
> be inserted in the wrong place.
Both problems are address in this commit.
The following contributed packages are (partially) obsolete.
org-browser-url.el
org-annotation-helper.el
The functionality of both these packages is a subset of
org-protocol.el, which is now part of the Emacs core
and is recommended.
org-depend.el
A significant fraction of the org-depend functionality
dependence on siblings, children, and parents) is now
built-in into the Org core. Org-depend remains
in the distribution as a proof-of-concept fro complex
and remote dependencies.
org-interactive-query.el
I believe that much of what this package was build for
is now available with tag filtering.
These packages are now marked in org-modules as such.
The command org-reload did not only reload any loaded files, but all
lisp files in the Org distribution. Also, it actually never reloaded
any files from the contrib directory. Both of these problems are now
fixed.
Mapping call a function for each matching entry. So far this has
always assumed that the entry stays in the buffer and search can
continue from there. However, when the mapper function removes the
tree, more control is needed to specify from where the search should
continue.
The action function handed to the mapping function can now set the
variable `org-map-continue-from' to the position from where mapping
should continue.
Daniel Hochheimer writes:
> It seems there is a bug in the handling of simple dependencies.
> I think an example tree is the best solution, to show you the bug:
>
> * Projects
> #+CATEGORY: Projects
> *** TODO foo bar project
> :PROPERTIES:
> :ORDERED: t
> :END:
> ***** TODO foo subproject :FooSubproject:
> ******* TODO Task 1
> ***** TODO bar subproject :BarSubproject:
> ******* TODO Task 1
>
> This is in my .emacs file:
> (setq org-enforce-todo-dependencies t)
> (setq org-agenda-dim-blocked-tasks 'invisible)
> (setq org-odd-levels-only t)
>
> the expected global todo agenda view imho is:
>
> Projects: Task 1 :FooSubproject:
>
> but actual it is unfortunately:
>
> Projects: Task 1 :FooSubproject:
> Projects: Task 1 :BarSubproject:
>
>
> Imho "Task 1" from "bar subproject" should not be visible,
> because "bar subproject " is blocked because of the
> ORDERED property (therefore it's childs should be blocked, too)
>
>
> Is it easy / possible to fix this bug? My whole GTD system is
> heavily based on such project / subproject-Constructs. But with
> this bug my global todo agenda view is unfortunately "polluted"
> a little bit with tasks from projects that shouldn't be active.
After some back and forth, Daniel convinced me, and this is now done
correctly.
If the trigger for a log mode entry in the agenda has notes, for
example a note associated with a state change or with a clock entry,
the first line of the notes will now be added to the logbook entry.
You can turn this off the with new variable
`org-agenda-log-mode-add-notes'.
The annotation and initial contents for a remember template are
normally taken from the variables `annotation' and `initial', which
are bound by remember. We now also check the property list for such
values, so that the link generating routine can force the right values
in there.
With the setting
(setq org-refile-use-outline-path 'file)
the file names ended up twice, like
"xxx.org/level 1/level 2 (xxx.org)"
Now the second occurrence is omitted.
During secondary agenda filtering, pressing "?" now will install a
filter that selects entries which do not have an effort defined.
This new model was necessary because we needed to stop interpreting
entries with no effort defines as 0 effort. This was inconsistent,
because for normal agenda sorting, the treatment of these entries
depends on the variable `org-sort-agenda-noeffort-is-high'. Now this
variable is also respected during filtering.
Rustom Mody writes:
> The last two lines of my org file are
>
> *** Vishnu Sahasranam
> *** Ram Navami
>
> without a newline at the end
>
> Trying to reorder these two lines I do a M-S-down on second last
> line I get
>
> *** Ram Navami*** Vishnu Sahasranam
This module implements inline tasks in Org-mode. Inline tasks are
tasks that have all the properties of normal outline nodes, including
the ability to store meta data like scheduling dates, TODO state, tags
and properties. However, these nodes are treated specially by the
visibility cycling and export commands.
RefTeX can now be used to create a citation in Org-mode buffers.
Setup the buffer with #+BIBLIOGRAPHY: bibbase style
and create citations with `C-c C-x ['.
The new variable `org-agenda-cmp-user-defined' can contain a function
to test how two entries should be compared during sorting.
user-defined-up and user-defined-down can then be part of any sorting
strategy.
Chris Leyon writes:
> For some semi-short time, org-ido-switchb has been broken, complaining
> about wrong type arguments. The attached one-line patch corrects
> this.
Patch by Chris fixes this problem.
The new variable `org-agenda-search-headline-for-time' also turned off
time searching for diary items as an unwanted side-effect. This
commit makes sure that diary entries are always parsed for a time.
Harri Kiiskinen writes:
> It seems that org-use-tag-inheritance set to regexp, the use of
> #+FILETAGS: and org-todo-list do not work together. It seems, that a
> regexp in org-use-tag-inheritance matching a tag set in #+FILETAGS
> causes this error:
>
> Debugger entered--Lisp error: (wrong-type-argument stringp nil)
> string-match("^ +" nil)
> [...]
> when org-use-tag-inheritance is set to regexp "te"
> with this file:
>
> --------
> #+STARTUP:
> #+FILETAGS: tea
> * TODO testing :test:
> ** TODO too :data:
> -----
>
> When the regexp is "tes", so that the FILETAG does not match,
> org-todo-list produces a correct list.
This is indeed a bug. The all to `org-get-tags-at' does change the
match data if there is a match for the inheritance regexp. This
problem is now avoided by first extracting (match-string 1), and then
getting the tags.
Studying this bug also exposed another one, namely that file tags are
not marked as inherited tags. This is now fixed, immediately when
the #+FILETAGS line is parsed.
Chris Randle writes:
> I have one giant Org-mode file for everything. I frequently use
> `C-c C-x b' to take the current node and show it in a new frame
> with narrow subtree so that I can concentrate on just that region
> of my file. Rather like hoist in GrandView, if anyone remembers
> that.
>
> My Org Manual (6.24b) says "The indirect buffer...will contain
> the entire buffer, but will be narrowed to the current
> tree. Editing the indirect buffer will also change the original
> buffer, but without affecting visibility in that buffer.
>
> I've noticed that, when working in the new frame, changing the
> TODO state of any item within the frame to DONE (when it is the
> currently clocked in item) does not stop the clock. Going back to
> my main frame and doing the same thing there on the same item
> does stop the clock.
>
> I haven't altered `org-clock-out-when-done', and Emacs reports
> its value as t.
This was caused by the fact that markers seem to point to the
base buffer always, so we need to check if the current buffer's
base buffer is equal to the marker buffer.
Chritopher Suckling writes:
> All,
>
> For various reasons (mainly Spotlight and an excess of HTML mail
> send by employers), I've migrated back to Mail.app after some
> time in Mutt (and how I miss the speed and threading).
>
> I habitually flag mails that need attention at a later date, and
> rather than use both org-mode and Mail.app to keep track of what
> needs doing, I've written a couple of hybrid elisp AppleScript
> functions to suck links to my flagged email into org-mode.
>
org-mac-message.el now contains these new functions.
When setting the variable `org-remember-back-directory', each
remember buffer created will now get its own unique file name in that
directory. So if you, by accident, overwrite a remember buffer or
remove it before storing it, there will be a backup.
Items are listed in the agenda sometimes in bright colors, to draw
attention to important tasks or deadlines. When such an item is
switched to DONE, the state change is reflected by the new TODO
keyword, but the line itself might still be bright. Org de-emphasizes
the line by changing the face of the line. It used to change it to
the face `org-done', but now we use a new, independent face
`org-agenda-done'.
When a tags/property match does match an entry and its sublevels, the
sublevels used to be indented by dots, to indicate that the matches
likely result from tag inheritance. This is now no longer the
default, but you can get it back with
(setq org-tags-match-list-sublevels 'indented)
David Maus writes:
> When I start to clock a headline (C-c C-x C-i) that does not have a
> LOGBOOK drawer orgmode inserts one but removes the indentation of the
> first line below the headline:
>
> Example:
>
> * TODO Do something
> Do this, do that etc.
>
> after C-c C-x C-i becomes
>
> * TODO Do something
> :LOGBOOK:
> CLOCK: [2009-03-20 Fr 19:03]--[2009-03-20 Fr 19:03] => 0:00
> :END:
> Do this, do that etc.
Fixed with this commit, a patch written by Peter Jones.
Outline levels below the headline boundary are now treated better, as
proper list. The variable `org-export-latex-low-levels' can now also
be `itemize' or `enumerate', to get the corresponding list structure.
The new default is `itemize', to make it parallel with the behavior in
HTML.
When exporting to a temporary buffer, images to replace LaTeX
fragments cannot be produced, because there is no useful location
where they can be put. Therefore, these images are not produced in
this case.
This commit implements an important change: When, during a
stuck-project search, a project tree is identified as not stuck, so
far the search would continue after the end of the project tree. From
now on, the search continues in the subtree, so that stuck subprojects
can still be identified.
In verse environments, line breaks are now enforced both in LaTeX and
in HTML. Centering is now implemented using a div rather than a
paragraph, so that there may be several paragraphs in the centering
environment. Blockquotes now also may have several paragraphs.
When a note is taken, the new drawer is created before the note is
taken. Now the drawer is removed again if the note gets aborted and
if the drawer is empty.
Anupam Sengupta writes:
> I routinely use time ranges (and occasionally time-stamp ranges)
> in my org files to document the scheduled block of time for a
> meeting or activity. As an example, I will mark meetings as:
>
> * A Meeting
> <2009-03-12 Thu 10:00-11:00>
>
> As often happens with meetings, rescheduling needs to be done and
> I use S-<up> or S-<down> on the time-stamp to make the
> modifications. While this works fine, it usually leads to a
> duplication when the *time* part of the time-stamp needs to be
> changed.
>
> For the same example above, if the time-block has now changed to
> 11:00-12:00, then I need to do S-<up> on both the "10:00" and the
> "11:00" string. I.e,
>
>
> * A Meeting
> <2009-03-12 Thu 11:00-11:00>
> ^
> +---------------- After the first S-<up>
>
> * A Meeting
> <2009-03-12 Thu 11:00-12:00>
> ^
> +---------------- After the second S-<up>
>
> Can we have a feature (with a toggle option perhaps) which would
> *move* the block (i.e., both time entries) by the same amount
> when either one is moved in the same direction. I.e., the
> proposal is to have:
>
> * A Meeting
> <2009-03-12 Thu 11:00-12:00>
> ^ ^
> | |
> | +---------- Automatically shifted
> +---------------- After the S-<up>
This is in fact how changing time works in many applications, and
it does make sense here as well. The commits implements this
change.
It also implements a way to change the start time of an entry from
the agenda. The date is normally changed with S-right/left.
Now, if you add a C-u prefix, the hour will be changed. If you
immediately press S-right/left again, hours will continue to be
changed.
A double prefix will do the same for minutes.
If a link is [[#name][desc]], the href wil be exacty href="#name".
So starting a link target with # will indicate that there will be an
explicit target for this.
Hsiu-Khuern Tang writes:
> If I export the file
>
> --------------------------------------------------
> #+OPTIONS: ^:{}
>
> * test
>
> a_{\alpha}
>
> a_{foo}
> --------------------------------------------------
>
> as HTML, I get "a_{α}" but "a<sub>foo</sub>": \alpha is not
> subscripted but foo is. I was expecting both to be subscripted,
> since they are in {}.
This is a bug, fixed now.
Wanrong Lin writes:
> Suppose I have an org file with following lines:
>
> * Test1
> Test2
>
> Now if I put the cursor at the beginning of the "Test2" line and
> press "M-S-RET" (Alt-Shift-Return on my machine), I got this:
>
> * Test1
> * Test2TODO
>
> The "TODO" keyword was inserted at the end instead of the
> beginning of the task text. This seems a bug to me.
Yes, this is a bug that occurs in the special case when the
heading stars are inserted in front of an existing line. The
commit adds code to make sure the correct position is used.
The default for the sitemap file was "index.org" which is really
terrible because it will overwrite the index.html file. Now the
default is "sitemap.org".
Adam Elliott writes:
> When run in day-step mode, the clocktable header line for each day's
> table contains an active timestamp. I figure it should be an inactive
> timestamp, since otherwise I get a junk entry in the agenda each day
> (whatever heading was previous to the clocktable).
>
> I'm talking about the output from a spec such as the following:
>
> #+BEGIN: clocktable :block thisweek :step day
This commit is the patch Adam sent in.
Message-mode assigns auto-safe file names to temporary buffers, in the
draft directory. This causes problems when running message-mode in a
temporary buffer with with-temp-buffer. When the form tries to kill
the buffer, is asks for saving it....
This commit turns off the buffer-modified flag and so avoids the
query.
Patch by Nick Dokos.
Running a command that would use the tag scanner could suffer a large
slow-down when many entries match, because the tag list with
inheritance forces each matching entry to walk the hierarchy.
Now, it is possible to avoid this penalty by using the variable
`org-scanner-tags', or by binding the `org-trust-scanner-tags' to t
around calls to `org-get-tags-at' and `org-entry-properties' when
retrieving tags and properties for the current entry in the
scanner/mapper.
An agenda item carries a full list of tags. The list must normally be
made, but not during a tags scan. So now the tags scan does pass on
its list instead, which should make things faster.
Jeff Mickey writes:
> Hey all,
>
> To reproduce:
>
> * TODO Make Bicycle :project:workshop:
> ** TODO Buy stuff
> ** TODO Build stuff
> ** TODO Test stuff
>
> (setq org-use-tag-inheritance t)
> (setq org-tags-exclude-from-inheritance '("project"))
>
> <C-a m> to type in a match string to search, I type in "project"
>
> I expected to see:
> TODO Make Bicycle
>
> I saw:
> TODO Make Bicycle
> .TODO Buy stuff
> .TODO Build stuff
> .TODO Test stuff
>
> I assume this isn't what is supposed to happen. I'm currently at work
> so I can't investigate and provide a diff, but it seems like there
> needs to be a check in org.el:10144:org-get-tags-at to remove tags
> that are explicitly excluded from inheritance.
This commit fixes the bug.
Custom commands can now bind `org-agenda-filter-preset'. This filter
will then be present in the agenda view and persist through refresh
and further filtering. Only a new agenda command will remove the
filter again.
uuidgen ids may start with a number and therefore are not valid names
in HTML. Therefore we now use and "ID-" prefix for such IDs when
exporting to HTML.
The variable org-priority-faces can now be used to set special faces
for different priority cookies.
Also, in the agenda, the default is now to fontify only the priority
cookie, not the entire task. See the variable
`org-agenda-fontify-priorities'.
Before, the bibliography will exist inside the outline structure, as
part of the last section. This commit adds code to find it, cut it
out, and move it to a better location.
Before this patch, org-agenda-quit would delete the agenda window if
the frame had more than one window. This patch changes that behavior
slightly so that if org-agenda-window-setup is 'current-window, the
agenda window won't be deleted.
Org erroneously filed top-level headings as level 2, because it
assumes that if should file below some heading. However, if there is
no heading to file under, this should be turned off.
Patch by igrekster.
When inserting new list entries, sometime empty lines will be
inserted automatically. This, however, makes only sense if empty
lines do not terminate the list, as configured by
`org-empty-line-terminates-plain-lists'.
This commit makes sure that, if
`org-empty-line-terminates-plain-lists' is set, automatic empty lines
will never be inserted.
Ian Barton writes:
>
> This has been happening for a while. I suspect it's something in my
> settings, but I can't work out what. When I publish a single file, I
> get the following error:
>
> Debugger entered--Lisp error: (wrong-type-argument arrayp nil)
> file-truename(nil)
> org-publish-file("/home/ian/nfs/firewall/Documents/org/holiday/holiday.org")
> org-publish-current-file(nil)
> call-interactively(org-publish-current-file)
> org-export(nil)
> call-interactively(org-export)
>
> Publishing a whole project works fine.
This was caused by an attempt of the publishing code to always find
the top enclosing project. While this makes sense when publishing a
project, for a single file we want just the smallest enclosing
project. This commit makes sure that this difference is treated
correctly.
A new hook is introduced, `org-agenda-before-write-hook'.
A function that ca be added to this hook is
`org-agenda-add-entry-text'. When this is done, each of the entries
shown in the agenda is amended with text that in the original buffer
is part of the entry text below the headline. Drawers are not copied,
and also the line with scheduling and deadline information is not
used. Finally, the number of ines to be added is imited by
`org-agenda-add-entry-text-maxlines'.
Links with description not create a note before the next headline that
contains the link. In the text, the description will be shown.
The new variable `org-export-ascii-links-to-notes' can be configured
to turn off this behavior, then the reference will be inserted inline
in the text. If the line becomes too long because of this, it will
be wrapped.
If the headline contains a time-of-day in one format or another, it
will be used to sort the entry into the time sequence of items for a
day. Some people have time stamps in the headline that refer to the
creation time or so, and then this produces an unwanted side effect.
If this is the case for your, use the new option
`org-agenda-search-headline-for-time' to turn off searching the
headline for a time.
Undo will now remove up to 20 characters typed consecutively, just
like Emacs normally does. We need a special implementation for this
because Org has its own self-insert command.
The code for doing this is a patch by Martin Pohlack.
Alan E. Davis writes:
> I have found the behavior of the cursor at the beginning of
> the line to be clumsy, and troublesome. I cannot easily set
> a region, for example.
>
> However, the special setting of ctrl-e is extremely useful.
>
> A single variable controls these two variables, in a unified
> way. This variable also has two aliases. The aliases are
> not recognized by the functions that are affected by these
> variables in org.el: org-beginning-of-line, and
> org-end-of-line. As far as I can see, there seems no reason
> to keep these two aliased variables as references to a
> single unified variable, insofar as the underlying code is
> concerned.
>
> Because, at least for me, the behaviors have sufficiently
> distinct behaviors, I propose these should be separated.
This is a reasonable request, and this commit implements it.
To have separate values, set org-special-ctrl-a/e to a cons
cell with the setting for C-a in the car and the setting for
C-e in the cdr.
This commit fixes the bug discussed in:
http://thread.gmane.org/gmane.emacs.orgmode/11106
The reason for the empty line being inserted is subtle:
The function `org-add-planning-info' is used to add and remove planning
info time stamps (deadline, scheduled, closed) from the second line in
an entry. Usually, the function is called to add something, with an
optional argument to also remove something. In doing so, it assumes
that the second line must be there, and if it is not there, it creates
it.
Now, sometimes `org-add-planning-info' is called only to remove a time
stamp. In this particular case it was to remove the CLOSED time
stamp. This happens when the state is changed from a DONE or nil
state to a not-done state. The idea behind this is that maybe to
entry was marked earlier as DONE, but the user has changed his mind,
so the timestamp recording when it was finished should be removed.
So in this case, an empty line was created, assuming that there would
be something to add - only nothing was added.
This commit arranges for checking if there is something to add before
creating an empty line.
orgstruct++-mode is an enhanced version of orgstruct mode that
also imports all indentation and paragraph settings into the major
mode. Furthermore, it now allows to use M-RET and M-S-RET in items
after the first line. The latter change was a request by Austin
Frank.
The new command `org-reload' allows to reload all Org lisp files.
By default it will load compiled files if these are available. If
not, or when called with a C-u prefix argument, uncompiled code will
be loaded. This is good for producing a meaningful backtrace when an
error occurs.
Like TODO keywords before, now also tags each get their own CSS class,
given by the tag itself. Invalid characters in tags are all replaced
by "_" to make sure the resulting HTML remains valid.
Two new variables can be used to add a prefix to the class names for
TODO keywords and tags.
Russel Adams writes:
> That worked, the only point I may make would be to exclude
> LATEX_HEADER and TEXT from that list.
>
> I'm also trying to resolve an ordering issue. I want to have a
> header/footer line declared in the header, but I want to use these
> orgTITLE macros in that. Currently LATEX_HEADER and the class go first
> before the definitions, and TEXT occurs inside the document. If the
> macro isn't defined before the header/footer, you get an error.
>
> I may have to manually code those, which defeats the purpose of using
> the org options.
OK, I removed those two fields, and I switched things around so that
the new macros are defined earlier.
Carsten Dominik
Bastien Guerry
Peter Jones