Of course, an updated patch is attached.
Best -- Eric
Carsten Dominik <carsten.dominik@gmail.com> writes:
> Hi Eric,
>
> I tried to apply the patch, but it does not apply cleanly, maybe due
> to other changes. Can I ask you to update and resubmit?
>
> Thanks!
>
> - Carsten
>
> On Jun 21, 2010, at 6:37 PM, Eric Schulte wrote:
>
>> Hi Robert,
>>
>> Thanks for the thoughtful message.
>>
>> I present a couple of solutions below.
>>
>> Robert Cunningham <robut@iinet.net.au> writes:
>>
>>> G'day All,
>>>
>>> I wonder if I've missed something and there is a better way.
>>>
>>> Essentially I'm trying to use org babel with R and LaTeX to create
>>> figures
>>> with both long and short captions (for contents)
>>>
>>> I'd started with:
>>>
>>> #+CAPTION: Nice data (filled points indicate less nice data)
>>> #+LABEL: fig:nicedata
>>> #+ATTR_LaTeX: width=0.98\textwidth
>>> #+begin_src R :file ndata.pdf :width 1000 :height 617 :exports
>>> results
>>> dotchart(data$ndata)
>>> #+end_src
>>>
>>> which pointed to the need for long/short captions...
>>>
>>> feeling hopeful I tried:
>>>
>>> #+CAPTION: Nice data [Nice data (filled points indicate less nice
>>> data)]
>>> #+LABEL: fig:nicedata
>>> #+ATTR_LaTeX: width=0.98\textwidth
>>> #+begin_src R :file ndata.pdf :width 1000 :height 617 :exports
>>> results
>>> dotchart(data$ndata)
>>> #+end_src
>>>
>>
>> I'm attaching a patch [1] which adds shortname support for captions.
>> Once
>> applied, the following syntax will result in a caption with a
>> shortname
>> and a longname.
>>
>> --8<---------------cut here---------------start------------->8---
>> some pre-table text
>>
>> #+source: g-nicedata
>> #+begin_src gnuplot :file graph.png :exports results
>> plot sin(x)
>> #+end_src
>>
>> #+Caption: [nice data]{a longer description of the niceness of the
>> data}
>> #+results: g-nicedata
>> [[file:graph.png]]
>>
>> some post-table text
>> --8<---------------cut here---------------end--------------->8---
>>
>> however, while this patch is still pending there is an Org-babel
>> solution below which should work immediately.
>>
>>>
>>>
>>> but no luck there.
>>>
>>> Next effort was to try to use R and LaTex more directly with
>>> noweb. I tried
>>> this:
>>>
>>>
>>>
>>> #+srcname: r-nicedata
>>> #+begin_src R :session :file ndata.pdf :results output :exports
>>> results
>>> dotchart(data$ndata)
>>> #+end_src
>>>
>>>
>>> #+begin_src latex :noweb yes
>>> \begin{figure}[htb!]
>>> \centering
>>> \includegraphics[width=0.98\textwidth]{<<r-nicedata()>>}
>>> \caption[Nice data]{Nice data (filled points indicate less nice
>>> data)}
>>> \label{fig:nicedata}
>>> \end{figure}
>>> #+end_src
>>>
>>>
>>>
>>> This does produce the figure and long/short contents BUT ALSO
>>> produces this:
>>>
>>> #+results: r-nicedata
>>> [[file:ndata.pdf]]
>>>
>>> which upon export results in a link and consequently the plot
>>> appearing both
>>> in the figure and elsewhere. This second plot is unwelcome.
>>>
>>> I've tried assorted :results and :output options but have not found
>>> how to
>>> suppress the #+results: but still obtain the figure. I've always used
>>> the :session option.
>>>
>>> I've also tried twigging an org-export option to suppress pdf
>>> export but the
>>> link is still exported so that is not a solution.
>>>
>>> The current "working" solution is to use the noweb approach and
>>> then use sed
>>> to clean out the links to the second image-ugly to say the least!
>>>
>>
>> You were very close with the noweb approach. The following
>> combination
>> should work -- notice the ":results silent" header argument to the
>> source block.
>>
>> --8<---------------cut here---------------start------------->8---
>> some pre-table text
>>
>> #+source: g-nicedata
>> #+begin_src gnuplot :file graph.png :results silent :exports none
>> plot sin(x)
>> #+end_src
>>
>> #+begin_src latex :noweb yes
>> \begin{figure}[htb!]
>> \centering
>> \includegraphics[width=0.98\textwidth]{<<g-nicedata()>>}
>> \caption[Nice data]{some nice data -- filled points indicate less
>> nice data}
>> \label{fig:nicedata}
>> \end{figure}
>> #+end_src
>>
>> some post-table text
>> --8<---------------cut here---------------end--------------->8---
>>
>> is exported to the following latex,
>>
>> --8<---------------cut here---------------start------------->8---
>> some pre-table text
>>
>>
>>
>> \begin{figure}[htb!]
>> \centering
>> \includegraphics[width=0.98\textwidth]{graph.png}
>> \caption[Nice data]{some nice data -- filled points indicate less
>> nice data}
>> \label{fig:nicedata}
>> \end{figure}
>>
>> some post-table text
>> --8<---------------cut here---------------end--------------->8---
>>
>> Hope this helps,
>>
>> Best -- Eric
>>
>>>
>>>
>>>
>>> All this with org version 6.36c
>>>
>>>
>>> What have I missed? What is the best way to do this?
>>>
>>>
>>> Cheers,
>>>
>>> Robert Cunningham
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Please use `Reply All' to send replies to the list.
>>> Emacs-orgmode@gnu.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>> Footnotes:
>> [1] From 6a55dcab99bbd7840117b8390ab5db347d2573ef Mon Sep 17
>> 00:00:00 2001
>> From: Eric Schulte <schulte.eric@gmail.com>
>> Date: Mon, 21 Jun 2010 09:02:37 -0700
>> Subject: [PATCH] add short-names to #+captions with support for
>> latex export
>>
>> captions specified with the following syntax
>> #+CAPTION: [shortname]{longname}
>> will have their short and longnames handled appropriately.
>>
>> Thanks to Robert Cunningham for suggesting this feature.
>>
>> * lisp/org-exp.el (org-export-attach-captions-and-attributes): adding
>> a shortname attribute to caption strings under the symbol name
>> org-caption-shortn.
>>
>> * lisp/org-latex.el (org-export-latex-tables): handling caption short
>> names on table export
>>
>> (org-export-latex-convert-table.el-table): handling caption short
>> names on table.el type table export
>>
>> (org-export-latex-links): handling caption short names on link/image
>> export
>>
>> (org-export-latex-format-image): now takes an optional argument
>> specifying a caption short name
>> ---
>> lisp/org-exp.el | 14 +++++++++-----
>> lisp/org-latex.el | 21 ++++++++++++++-------
>> 2 files changed, 23 insertions(+), 12 deletions(-)
>>
>> diff --git a/lisp/org-exp.el b/lisp/org-exp.el
>> index 029e4d7..466d7da 100644
>> --- a/lisp/org-exp.el
>> +++ b/lisp/org-exp.el
>> @@ -1256,7 +1256,7 @@ the current file."
>> (goto-char (point-min))
>> (while (re-search-forward org-bracket-link-regexp nil t)
>> (org-if-unprotected-at (1+ (match-beginning 0))
>> - (let* ((md (match-data))
>> + (let* ((md (match-data))
>> (desc (match-end 2))
>> (link (org-link-unescape (match-string 1)))
>> (slink (org-solidify-link-text link))
>> @@ -1381,8 +1381,8 @@ removed as well."
>> select-tags "\\|")
>> "\\):"))
>> (re-excl (concat ":\\(" (mapconcat 'regexp-quote
>> - exclude-tags "\\|")
>> - "\\):"))
>> + exclude-tags "\\|")
>> + "\\):"))
>> beg end cont)
>> (goto-char (point-min))
>> (when (and select-tags
>> @@ -1593,11 +1593,14 @@ table line. If it is a link, add it to the
>> line containing the link."
>> "^[ \t]*\\(|[^-]\\)"
>> "\\|"
>> "^[ \t]*\\[\\[.*\\]\\][ \t]*$"))
>> - cap attr label end)
>> + cap shortn attr label end)
>> (while (re-search-forward re nil t)
>> (cond
>> ((match-end 1)
>> - (setq cap (concat cap (if cap " " "") (org-trim (match-string 1)))))
>> + (setq cap (concat cap (if cap " " "") (org-trim (match-string 1))))
>> + (when (string-match "\\[\\(.*\\)\\]{\\(.*\\)}" cap)
>> + (setq shortn (match-string 1 cap)
>> + cap (match-string 2 cap))))
>> ((match-end 2)
>> (setq attr (concat attr (if attr " " "") (org-trim
>> (match-string 2)))))
>> ((match-end 3)
>> @@ -1609,6 +1612,7 @@ table line. If it is a link, add it to the
>> line containing the link."
>> (point-at-eol)))
>> (add-text-properties (point-at-bol) end
>> (list 'org-caption cap
>> + 'org-caption-shortn shortn
>> 'org-attributes attr
>> 'org-label label))
>> (if label (push (cons label label) target-alist))
>> diff --git a/lisp/org-latex.el b/lisp/org-latex.el
>> index 01a4b05..6c2aab2 100644
>> --- a/lisp/org-latex.el
>> +++ b/lisp/org-latex.el
>> @@ -1576,7 +1576,7 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (org-table-last-column-widths (copy-sequence
>> org-table-last-column-
>> widths))
>> fnum fields line lines olines gr colgropen line-fmt align
>> - caption label attr floatp longtblp)
>> + caption shortn label attr floatp longtblp)
>> (if org-export-latex-tables-verbatim
>> (let* ((tbl (concat "\\begin{verbatim}\n" raw-table
>> "\\end{verbatim}\n")))
>> @@ -1585,6 +1585,8 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (progn
>> (setq caption (org-find-text-property-in-string
>> 'org-caption raw-table)
>> + shortn (org-find-text-property-in-string
>> + 'org-caption-shortn raw-table)
>> attr (org-find-text-property-in-string
>> 'org-attributes raw-table)
>> label (org-find-text-property-in-string
>> @@ -1652,7 +1654,8 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (if floatp "\\begin{table}[htb]\n"))
>> (if floatp
>> (format
>> - "\\caption{%s%s}"
>> + "\\caption%s{%s%s}"
>> + (if shortn (concat "[" shortn "]") "")
>> (if label (concat "\\\label{" label
>> "}") "")
>> (or caption "")))
>> (if (and longtblp caption) "\\\\\n" "\n")
>> @@ -1680,10 +1683,11 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>>
>> (defun org-export-latex-convert-table.el-table ()
>> "Replace table.el table at point with LaTeX code."
>> - (let (tbl caption label line floatp attr align rmlines)
>> + (let (tbl caption shortn label line floatp attr align rmlines)
>> (setq line (buffer-substring (point-at-bol) (point-at-eol))
>> label (org-get-text-property-any 0 'org-label line)
>> caption (org-get-text-property-any 0 'org-caption line)
>> + shortn (org-get-text-property-any 0 'org-caption-shortn line)
>> attr (org-get-text-property-any 0 'org-attributes line)
>> align (and attr (stringp attr)
>> (string-match "\\<align=\\([^ \t\n\r,]+\\)" attr)
>> @@ -1721,7 +1725,8 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (setq tbl (concat "\\begin{center}\n" tbl "\\end{center}")))
>> (when floatp
>> (setq tbl (concat "\\begin{table}\n"
>> - (format "\\caption{%s%s}\n"
>> + (format "\\caption%s{%s%s}\n"
>> + (if shortn (format "[%s]" shortn) "")
>> (if label (format "\\label{%s}" label) "")
>> (or caption ""))
>> tbl
>> @@ -1822,6 +1827,7 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> "file")))
>> (coderefp (equal type "coderef"))
>> (caption (org-find-text-property-in-string 'org-caption
>> raw-
>> path))
>> + (shortn (org-find-text-property-in-string
>> org-caption-shortn raw-path))
>> (attr (or (org-find-text-property-in-string
>> org-attributes raw-
>> path)
>> (plist-get org-export-latex-options-plist
>> :latex-image-
>> options)))
>> (label (org-find-text-property-in-string 'org-label raw-path))
>> @@ -1859,7 +1865,7 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (plist-get org-export-latex-options-plist :inline-images))
>> ;; OK, we need to inline an image
>> (insert
>> - (org-export-latex-format-image raw-path caption label attr)))
>> + (org-export-latex-format-image raw-path caption label
>> attr shortn)))
>> (coderefp
>> (insert (format
>> (org-export-get-coderef-format path desc)
>> @@ -1889,7 +1895,7 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (t (insert "\\texttt{" desc "}")))))))
>>
>>
>> -(defun org-export-latex-format-image (path caption label attr)
>> +(defun org-export-latex-format-image (path caption label attr
>> &optional shortn)
>> "Format the image element, depending on user settings."
>> (let (ind floatp wrapp multicolumnp placement figenv)
>> (setq floatp (or caption label))
>> @@ -1932,7 +1938,7 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (floatp "\\begin{figure}%placement
>> \\centering
>> \\includegraphics[%attr]{%path}
>> -\\caption{%labelcmd%caption}
>> +\\caption%shortn{%labelcmd%caption}
>> \\end{figure}")
>> (t "\\includegraphics[%attr]{%path}")))
>>
>> @@ -1953,6 +1959,7 @@ The conversion is made depending of STRING-
>> BEFORE and STRING-AFTER."
>> (expand-file-name path)
>> path))
>> (cons "attr" attr)
>> + (cons "shortn" (if shortn (format "[%s]" shortn) ""))
>> (cons "labelcmd" (if label (format "\\label{%s}"
>> label)""))
>> (cons "caption" (or caption ""))
>> --
>> 1.7.0.4
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Please use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
> - Carsten
>From 5cbb38e25a2d2eae7c3c688d347f80619ecb8463 Mon Sep 17 00:00:00 2001
From: Eric Schulte <schulte.eric@gmail.com>
Date: Thu, 1 Jul 2010 08:07:17 -0700
Subject: [PATCH] add short-names to #+captions with support for latex export
captions specified with the following syntax
#+CAPTION: [shortname]{longname}
will have their short and longnames handled appropriately.
Thanks to Robert Cunningham for suggesting this feature.
* lisp/org-exp.el (org-export-attach-captions-and-attributes): adding
a shortname attribute to caption strings under the symbol name
org-caption-shortn.
* lisp/org-latex.el (org-export-latex-tables): handling caption short
names on table export
(org-export-latex-convert-table.el-table): handling caption short
names on table.el type table export
(org-export-latex-links): handling caption short names on link/image
export
(org-export-latex-format-image): now takes an optional argument
specifying a caption short name
* lisp/org-latex.el (org-export-latex-fixed-width): now checking
org-example rather than org-protected on verbatim export, because by
default all ": " prefixed lines are marked protected
* lisp/org-latex.el: items are no longer skipped when their first line
ends on a protected element.
* lisp/org-list.el: protected environments looking like lists are not
exported anymore.
Thanks to Nicolas Goaziou <n.goaziou@gmail.com> for this patch.
Environments coming from latex backend specific instructions (#+LaTeX)
are already protected and won't be treated as normal environments.
* lisp/org-latex.el (org-export-latex-preprocess): Environments coming
from latex backend specific instructions (#+LaTeX) are already
protected and won't be treated as normal environments.
* lisp/org-latex.el (org-export-latex-fontify): Avoid fontifying
several stars in a row.
* lisp/org.el (org-emphasis-alist): Mention
`org-export-docbook-emphasis-alist' in the docstring.
Patch by Christian Moe, who writes:
> It looks like support for formatting custom link types in LaTeX export
> is broken?
>
> I was trying to implement a custom link type with its own formatting
> function for HTML and LaTeX export, following the steps in
> org-bbdb.el.
>
> I've found that org-bbdb-export does not italicize bbdb links in
> LaTeX, nor does my own org-cite-export turn my custom =cite:= links
> into LaTeX =\cite{}= citations. Everything works fine in HTML export,
> but in LaTeX all custom link types get formatted as =\texttt{descr}=.
>
> I see that org-export-as-html and org-export-as-docbook look up
> org-link-protocols to get the function for formatting the link, but it
> seems that org-export-as-latex doesn't.
>
>
This bug was introduced in commit
1b40601ebd
which sets the body-only option to true when called with a simple
prefix argument, however it does not check that the prefix argument
is non-null.
Thanks to Valentin Wüstholz for reporting this bug
This new code will search #+INDEX lines in the buffer. For LaTeX, it
will simple convert these into LaTeX \index{} commands. For other
backends, it will copy thee entries to a new file, with extension
orgx. These files can then later be post-processed to create the index.
Keith writes:
> I noticed something strange and I think it's might be a bug converting
> to tex file. I've been trying to put a special symbol inside a
> bracket, e.g.
>
> air temperature (degree Celsius)
>
> and the symbol should look like ^{\circ}C in org file. It works well
> if it is standalone. However, when I put the brackets out of it, say
> (^{\circ}C), the pdf output looks bizarre. I have checked the tex
> output and the converting results from orgmode file are
>
> ^{\circ}C --> $^{\circ}$C
> (^{\circ}C) --> (^\{\circ}C)
Jambunathan K. writes:
> I would like to add the following observation as well -
>
> ---> org input <---
> #+AUTHOR: Jambunathan K\cr\href{mailto:{{{EMAIL}}}}{{{{EMAIL}}}}
>
> ---> actual tex output <---
> \author{Jambunathan K\cr\href{mailto:kjambunathan@gmail.com}\{kjambunathan@gmail.com\}}
>
> The above tex snippet has the effect of getting the "Url Box" wrong.
>
> I was hoping to produce the following line -
> \author{Jambunathan K\cr\href{mailto:kjambunathan@gmail.com}{kjambunathan@gmail.com}}
>
> Generally speaking, macro expansion in author string behaves strangely.
Lukasz Stelman writes:
I've create some presentation on programming (some more to do) and to my
surprise I've discovered that if org-mode escapes one "&" properly it
doesn't do its job in case of "&&" (and a single "^" too). I get "\&&"
in latex file which of course is wrong.
This support was totally broken. It works now again. Unfortunately
it is not possible to edit the table directly in the org-mode buffer
anymore - to edit such a table, you have to use C-c '
Bill Jackson writes:
> When exporting to LaTeX, curly brackets in a command will be escaped
> if that command also contains angle brackets. This can be a problem
> when using beamer. An example input file:
>
> ------------------------------------------------------------------------
>
> #+LaTeX_CLASS: beamer
>
> * The One and Only Frame
> When LaTeX \alert<2>{commands} contain angle brackets, the curly
> brackets are erroneously escaped in the output. \alert{Commands}
> that do not contain angle brackets work properly.
>
> ------------------------------------------------------------------------
>
> Typing C-c C-e l will generate the output file:
>
> ------------------------------------------------------------------------
>
> % Created 2010-01-15 Fri 13:57
> \documentclass{beamer}
> \usepackage[latin1]{inputenc}
> \usepackage[T1]{fontenc}
> \usepackage{graphicx}
> \usepackage{longtable}
> \usepackage{float}
> \usepackage{wrapfig}
> \usepackage{soul}
> \usepackage{amssymb}
> \usepackage{hyperref}
>
>
> \title{escCurly}
> \author{}
> \date{15 January 2010}
>
> \begin{document}
>
> \maketitle
>
> \begin{frame}
> \frametitle{Outline}
> \setcounter{tocdepth}{3}
> \tableofcontents
> \end{frame}
>
> \begin{frame}
> \frametitle{The One and Only Frame}
> \label{sec-1}
>
> When \LaTeX{} \alert<2>\{commands\} contain angle brackets, the curly
> brackets are erroneously escaped in the output. \alert{Commands}
> that do not contain angle brackets work properly.
> \end{frame}
>
> \end{document}
Bill Jackson writes:
> When exporting to LaTeX, the commands \LaTeX and \TeX are not
> processed consistently. In particular, the backslash for \LaTeX is
> escaped. This might not be a bug, but it is a bit confusing. An
> example input file:
>
> ------------------------------------------------------------------------
>
> * The One and Only Header
> The command \LaTeX generates an escaped backslash, while \TeX and
> \alpha do not. Note that LaTeX is converted to a command, while TeX
> is not.
>
> ------------------------------------------------------------------------
>
> Typing C-c C-e l will generate the output file:
>
> ------------------------------------------------------------------------
>
> % Created 2010-01-15 Fri 13:47
> \documentclass[11pt]{article}
> \usepackage[latin1]{inputenc}
> \usepackage[T1]{fontenc}
> \usepackage{graphicx}
> \usepackage{longtable}
> \usepackage{float}
> \usepackage{wrapfig}
> \usepackage{soul}
> \usepackage{amssymb}
> \usepackage{hyperref}
>
>
> \title{escLaTeX}
> \author{}
> \date{15 January 2010}
>
> \begin{document}
>
> \maketitle
>
> \setcounter{tocdepth}{3}
> \tableofcontents
> \vspace*{1cm}
> \section{The One and Only Header}
> \label{sec-1}
>
> The command \\LaTeX{} generates an escaped backslash, while \TeX and
> $\alpha$ do not. Note that \LaTeX{} is converted to a command, while TeX
> is not.
>
> \end{document}
The coding system of the LaTeX class will now only be set to the value
corresponding to the buffer's file coding system if the class
specifies \usepackage[AUTO]{inputenc}. Any other value for the coding
system will not be modified.
Christopher Suckling writes:
> Thank you, but not quite working yet:
>
> ,----
> | #+BIND: org-export-latex-title-command ""
> `----
>
> now appears to be having the *effect* of setting a global variable.
>
> I load Emacs then visit the below test org file. I then export the file.
>
> I get a \maketitle line.
>
> I then C-c C-c on the #+BIND: line and re-export.
>
> \maketitle is removed.
>
> I then export another org file without the #+BIND: line.
>
> There is no \maketitle, even though there should be.
>
> I add
>
> ,----
> | #+BIND: org-export-latex-title-command "\foobar"
> `----
>
> to the new org file, C-c C-c and export:
>
> \foobar is added to the exported file.
>
> Finally, I re-export the original test org file (without C-c C-c on the
> #+BIND: line):
>
> \foobar is added to the exported file.
>
> However,
>
> ,----
> | C-h v org-export-latex-title-command
> `----
>
> always returns the value "\\maketitle", no matter what the value of the
> #+BIND: line.
>
> Best, Christopher
The regular expression was not optimal, and if there was a horizontal
rule, search would not start from the beginning of the buffer but from
after the rule!
Julien Barnier writes:
> I recntly noticed that in some specific cases, the final '}' was
> esacped when exproting an emphasis element to LaTeX.
>
> For example, the following element :
>
> /aa/
>
> Is exported to :
>
> \emph{aa\}
>
> This does not append if the string begins with a space or if it
> is ASCII-only. For example, the followig strings are exported
> correctly :
>
> /aaa/
> //
>
> I don't understand why the problem only occurs with non-ASCII chars,
> but I think that the regexp to protect added special chars in the
> org-export-latex-fontify function is missing a '?' in the
> beginning. Tha attached patch corrects it.
Francesco Pizzolante writes:
> Exporting multiple references to the same footnote to LaTeX lead to a wrong
> generated code.
>
> The following example:
>
> --8<---------------cut here---------------start------------->8---
> * Title
> This is my text[fn:1:This is my footnote.]. And another one[fn:1].
> --8<---------------cut here---------------end--------------->8---
>
> Will produce the following LaTeX code:
>
> --8<---------------cut here---------------start------------->8---
> \section{Title}
> \label{sec-1}
>
> This is my text\footnote{This is my footnote. }. And another one\$$^{1}$\$.
> --8<---------------cut here---------------end--------------->8---
>
> The correct code should be:
>
> --8<---------------cut here---------------start------------->8---
> \section{Title}
> \label{sec-1}
>
> This is my text\footnote{This is my footnote. }. And another one$^{1}$.
> --8<---------------cut here---------------end--------------->8---
Sebastian Rose writes:
> The following code does not work as expected, when exported to PDF:
>
> => --->8----------------------------->8----------------------------->8---
> * Image basics
>
> Images are inserted into an Org file in a fashion similar to links:
> : [[file:///home/sebastian/develop/org/org-mode-unicorn.png]]
>
> <= ---8<-----------------------------8<-----------------------------8<---
>
> Result:
>
> The last line is exported as:
>
> \href{file:///home/sebastian/develop/org/org-mode-unicorn.png}{nil}
>
>
> Expected result:
>
> I expect the last line to be exported as fixed width text.
>
Eric Fraga sent this test file:
> * Problem with underscore (subscript) in emphasised text.
> 1. Design for CO_2 capture.
> 2. The paper /Design for CO_2 capture/ is very interesting.
> 3. This item is combined with the previous and the previous is
> actually formatted wrongly.
> 4. This item seems to come out just fine.
Martin G. Skjaeveland writes:
> Then I write
>
> some text some text ~<<some_scr_block_name>>~.
>
> because I want "<<some_scr_block_name>>" written as verbatim in my latex
> export, I get, in latex,
>
> \texttt{\textbackslash{}label\{some\_src\_block\_name\}some\_src\_block\_name}.
>
> which gives me the text
>
> \label{some_src_block_name}some_src_block_name
>
> in verbatim.
Brenton Kenkel writes:
> I found an apparent minor bug with links containing quotation marks in
> LaTeX export. If the first character in the name of a link is a
> quotation mark, it is converted to a closing mark rather than an
> opening mark. For example:
>
> ,----
> | * test
> |
> | [[http://www.google.com]["hello"]]
> | [[http://www.google.com]["two" "quotes"]]
> `----
>
> This produces:
>
> ,----
> | \href{http://www.google.com}{''hello''}
> | \href{http://www.google.com}{''two'' ``quotes''}
> `----
Nick Dokos writes:
> I've been running with the following patch for a little while and have
> seen no problems (it does \centering rather than \centerline but I don't
> think it makes a difference for an image - it would make a difference for a
> floating centered paragraph with multiple lines however.)
>
> There is another problem as well: there is a \n added after the
> \end{figure} which leads to spurious paragraphs. The patch fixes
> that too.
Thomas S. Dye writes:
> I'm trying to generate $^{14}$C, or an equivalent, from org-mode
> to represent the isotope of carbon important in archaeological
> dating.
>
> Reading the manual, I tried this:
>
> ** A Brief History of Attempts to Interpret the ^{14}C Dates
> *** The ^{14}C Dates
>
> Which, in my #+LaTeX_CLASS: beamer export, yields
>
> \subsection{A Brief History of Attempts to Interpret the \^{}{14}C Dates}
> ...
> \begin{frame}\frametitle{The \^{}{14}C Dates}
>
> The problem seems to be the space before the ^.
>
> This input:
>
> ** A Brief History of Attempts to Interpret the x^{14}C Dates
> *** The x^{14}C Dates
>
> yields the correct LaTeX:
>
> \subsection{A Brief History of Attempts to Interpret the x$^{\mathrm{14}}$C Dates}
> ...
> \begin{frame}\frametitle{The x$^{\mathrm{14}}$C Dates}
>
> Am I missing something? Or, is the LaTeX export thrown off by
> the space before ^?
Indeed, a space before the caret was not allowed in LaTeX export
Jeff Kowalczyk writes:
> Is there a way to escape backslashes (\) in code and verbatim that
> will export to LaTeX correctly?
>
> When writing =\\host\share= or =C:\path\to=, pdftolatex output is
> incorrect.
Karl Stump writes:
> When exporting a table with a horizontal line the column count is wrong.
>
> Output from pdflatex run:
>
> ! Extra alignment tab has been changed to \cr.
> <template> \endtemplate
>
> l.32 ....\multicolumn{4}{r}{Continued on next page}
> \
> ?
>
> Here's the table in the tex file:
>
> \begin{longtable}{||lll||}
> \caption{This is a long table with lines around and between cells}\\
> Heading1 & Heading2 & Heading3 \\
> \hline
> \endhead
> \hline\multicolumn{4}{r}{Continued on next page}\
> \endfoot
> \endlastfoot
> \hline
> alpha & beta & gamma \\
> & & \\
> \end{longtable}
>
> Here's the org file:
>
> ** table export test
>
> #+CAPTION: This is a long table with lines around and between cells
> #+LATEX_HEADER: \usepackage[landscape]{geometry}
> #+LATEX_HEADER: \geometry{left=0.12in,right=0.12in,top=0.25in,bottom=0.25in}
> #+ATTR_LaTeX: longtable align=||lll||
>
> | / | <30> | <10> | <10> |
> | | Heading1 | Heading2 | Heading3 |
> |---+----------+----------+----------|
> | | alpha | beta | gamma |
> | | | | |
Nick Dokos replies:
> I believe it's because of the dummy "calculation-mark" column,
> which is not exported. However, the variable org-table-last-alignment
> (a list, whose length becomes the value of the \multicolumn argument)
> ends up having the value (nil nil nil nil), i.e. it counts the dummy
> column as well. What the proper place to adjust the value is, I don't
> know, but it should be easy for Carsten to fix it. For the time being,
> you can either get rid of the dummy row and column (e.g. if you don't
> need the widths) or fix it by hand in the LaTeX file.
Indeed, and this commit pops `org-table-last-alignment' if the first
column has been removed by `org-table-clean-before-export'. The same
problem must have caused a one-off error when setting the alignment in
LaTeX tables, bu it seems nobody has noticed this so far. Anyway,
also this is fixed now.
A `save-excursion' around a call to org-table-align make point end up
*before* the table. The reason is that a table align replaces the
entire table, including the newline before it. When the table is
removed in order to be replaced, the marker created by
`save-excursion' slips. `org-table-align' has it's own, built-in
`save-excursion' by remembering the line and column where the cursor
was before the align.
Dan Griswold writes:
> Hi there,
>
> Well, I think this a bug.
>
> Given this org input file:
>
> ,----
> | * Things
> | ** A Heading
> | - some
> | - stuff
> | - in
> | - a
> | - list
> | ** Another heading
> | - another
> | - list
> `----
>
> then if I select the level one heading (titled "Things")
> with C-c @, and export to LaTeX using C-c C-e l, I get this
> output:
>
> ,----
> | % Created 2009-07-29 Wed 20:24
> | \documentclass[12pt]{article}
> | \usepackage[utf8]{inputenc}
> | \usepackage[T1]{fontenc}
> | \usepackage{graphicx}
> | \usepackage{longtable}
> | \usepackage{hyperref}
> |
> |
> | \title{Things}
> | \author{Daniel M. Griswold}
> | \date{July 29, 2009}
> |
> | \begin{document}
> |
> | \maketitle
> |
> | ** A Heading
> | \begin{itemize}
> | \item some
> | \item stuff
> | \item in
> | \item a
> | \item list
> | \end{itemize}
> | ** Another heading
> | \begin{itemize}
> | \item another
> | \item list
> | \end{itemize}
> |
> | \end{document}
> `----
>
> Note that the top level headings ("A Heading" and "Another
> Heading") are not exported as \section, but with the
> asterisks they have in the org file:
>
> ,----
> | ** A Heading
> | \begin{itemize}
> |
> | ... snip ...
> |
> | \end{itemize}
> | ** Another heading
> `----
>
> Exporting the whole file does what it's supposed to do:
> export the headlines as \section and \subsection.
This commit fixes the issue.
`org-export-latex-first-lines' was rather stupid and would
discard the end of the region with the region was active.
Thanks to Holst Thomas for this bug report.
Many different people want to set many different variables in a
buffer-local way for export. This cannot be done with file variables,
because the Org buffer is not current while the exporter is running.
Lots of variables can be set with the #+OPTIONS lines, but finding
abbreviations goes only so far.
Therefore we have now a general mechanism that can be used to bind
variables during export operations.
a line like: #+BIND: variable value
will bind the variable to value. For example,
the line
>> #+OPTIONS: toc:nil
can now equivalently be written as
>> #+BIND: org-export-with-toc nil
Some propel process LaTeX filed not directly to pdf, but go
through dvi and then to ps or pdf. In that case, allowed images
are ps and eps files, not pdf and jpg.
This commit adds the two extensions, so that export using that
alternative path can be supported better. However, it is up to the
user to make sure that the images are actually compatible with the
backend.
Eric Schulte
Bastien Guerry
Nicolas Goaziou
Carsten Dominik
Bernt Hansen