Called with a numeric prefix argument, `org-timer-set-timer' uses
this numeric value as the duration of the timer.
Called with a `C-u' prefix argument, use `org-timer-default-timer'
without prompting the user for a duration.
With two `C-u' prefix arguments, use `org-timer-default-timer'
without prompting the user for a duration and automatically
replace any running timer."
This variable defaults to nil. When non-nil, this is the default
value when the user is prompted for a timer.
This patch also improves org-timer-set-timer so that the user can
replace the current timer by a new one.
Tom writes:
> if I have a heading like this:
>
>
> ** TODO test task
> stuff
> SCHEDULED: <2010-05-15 Sat 07:35 +1d>
>
>
> Then an empty line is inserted below the heading (before "stuff") if
> org-indent-mode is on and logging is set like this:
>
>
> (setq org-log-repeat nil)
> (setq org-log-done 'time)
>
>
>
> I tested it with a clean config using only the settings above.
This patch fixes the problem first reported by Tassilo Horn in
[mid:87y6fhxc47.fsf@thinkpad.tsdh.de]. Problem was that
`org-refile-cache-get' returned an invalid refile target table after
the refile cache was cleared.
Patch by Bernt Hansen:
> When org-clock-report-include-clocking-task is set we always add the
> current clocking task to the clock report. This is incorrect if you
> are looking at an agenda clock report for a time range that does not
> include the current clocking task (e.g. yesterday or last week).
>
> Now we only include the current clocking task if the clock report
> date range includes the current clocking task start time.
i/q/C-g Ignore this question; the same as keeping all the idle time.
k/K Keep X minutes of the idle time (default is all). If this
amount is less than the default, you will be clocked out
that many minutes after the time that idling began, and then
clocked back in at the present time.
g/G Indicate that you \"got back\" X minutes ago. This is quite
different from 'k': it clocks you out from the beginning of
the idle period and clock you back in X minutes ago.
s/S Subtract the idle time from the current clock. This is the
same as keeping 0 minutes.
C Cancel the open timer altogether. It will be as though you
never clocked in.
j/J Jump to the current clock, to make manual adjustments.
For all these options, using uppercase makes your final state
to be CLOCKED OUT.
Patch by Christian Moe, who writes:
> It looks like support for formatting custom link types in LaTeX export
> is broken?
>
> I was trying to implement a custom link type with its own formatting
> function for HTML and LaTeX export, following the steps in
> org-bbdb.el.
>
> I've found that org-bbdb-export does not italicize bbdb links in
> LaTeX, nor does my own org-cite-export turn my custom =cite:= links
> into LaTeX =\cite{}= citations. Everything works fine in HTML export,
> but in LaTeX all custom link types get formatted as =\texttt{descr}=.
>
> I see that org-export-as-html and org-export-as-docbook look up
> org-link-protocols to get the function for formatting the link, but it
> seems that org-export-as-latex doesn't.
>
>
Karl Eichwalder writes:
> Consider the following two files:
>
> * 2009
> #+TBLNAME: 2009
> :PROPERTIES:
> :ID: ea32e5b5-31ba-468e-8e31-3e0d09696bb0
> :END:
> |-----+-------|
> | mm | km |
> |-----+-------|
> | all | 946.8 |
> |-----+-------|
>
> * 2010
> #+TBLNAME: 2010
> :PROPERTIES:
> :ID: e0df84c4-8abc-458f-a1ee-eb53eb71b4f0
> :END:
> |-----+-------+-------+-------|
> | mm | km | B km | G km |
> |-----+-------+-------+-------|
> | all | 249.4 | 429.2 | 678.6 |
> |-----+-------+-------+-------|
>
> * all
> :PROPERTIES:
> :ID: 44751a7f-73a4-4c07-b3c2-e3edb9042acd
> :END:
> #+TBLNAME: all
> |------+--------|
> | yyyy | km |
> |------+--------|
> | 2009 | |
> | 2010 | 678.6 |
> |------+--------|
> | all | 1625.4 |
> |------+--------|
> #+TBLFM: @2$2=remote(ea32e5b5-31ba-468e-8e31-3e0d09696bb0,$LR2);%.1f::@3$2=remote(2010,$LR4);%.1f::$LR2=vsum(@2$2..@-1);%.1f
>
> Then, in the 2010 file, eval the formula of the "all" table by pressing
> C-c C-c.
> ==>
>
> It takes the km value from the 2009 file, but also puts the cursor
> (point) into the 2009 file in front of the ID:
>
> * 2009
> #+TBLNAME: 2009
> :PROPERTIES:
> :ID: -!-ea32e5b5-31ba-468e-8e31-3e0d09696bb0
> :END:
> |-----+-------|
> | mm | km |
> |-----+-------|
> | all | 946.8 |
> |-----+-------|
>
> -=-=-=-=-=-=-=-=-=-=-=-=-=- cut here -=-=-=-=-=-=-=-=-=-=-=-=-=-
>
> I'd prefer if the point would stay in the 2010 file.
Baoqui Cui writes:
> "robut@iinet.net.au" <robut@iinet.net.au> writes:
>
> I very much like the idea of native inline image display in Org-mode but can't
> seem to make it work.
>
> Given a 6.36 snapshot or 6.36 release and these org file contents
>
> * Test image
> Test image
> [[Screenshot.png]]
>
>
> I hoped org would display that image after C-c C-x C-v. Rather Org-mode returns
> "No images to display inline".
>
> I've tried different ways of linking that image, different image formats,
> relative vs complete paths, and my regular .emacs vs a near empty one and
> always the same result. If I toggle iimage-mode the image displays fine per se
> but does not affect how Org-mode works.
>
> Seems clear I am missing something simple. What?
>
> I like the idea of inline image display too, but hit the similar
> problems. After reading the code in org.el, I found that the inline
> image file link has to start with either "file:" or "./".
>
> For example, the following two links are OK:
>
> [[file:~/images/myImage.png]]
> [[./figures/org-mode-unicorn.svg]]
>
> but the following two are not:
>
> [[Screenshot.png]]
> [[~/images/myImage.png]]
>
> Here is a small patch that seems to work well for me, but I'd like
> Carsten to check whether it may break anything
Christian Egli
Bastien Guerry
David Maus
John Wiegley
Carsten Dominik
Bernt Hansen
Russell Adams