* lisp/org-agenda.el (org-agenda-local-vars): Clean up the variable list.
(org-agenda-get-restriction-and-command): Add a key for toggling
sticky agenda views.
* doc/org.texi (Agenda dispatcher): Document sticky agenda views
and the new key for them.
This is just an intermediate commit, to make sure that the comments
are all visible in the git history.
* lisp/org-agenda.el (org-agenda-local-vars): Final decisions about global/local
* lisp/org-agenda.el (org-agenda-force-single-file): Variable removed.
(org-prepare-agenda-window): Store pre-agenda window config locally.
(org-timeline): Introduce a scoped version of `org-agenda-show-log'.
(org-agenda-list): Introduce a scoped version of
`org-agenda-show-log'.
(org-agenda-get-progress): Use the scoped version of
`org-agenda-show-log'.
(org-agenda-local-vars): Write the analysis result as a comment - to
be cleaned up in the next iteration.
* lisp/org-agenda.el (org-toggle-sticky-agenda): Kill all agenda buffers
when toggling sticky-agendas.
(org-agenda-get-restriction-and-command): Add `C-c a C-k' as a key to
explicitly kill all agenda buffers.
(org-agenda-run-series): Remove any old agenda markers in the buffer
that is going to take the new block agenda.
(org-prepare-agenda): Reset markers before erasing the buffer anc
running `org-agenda-mode', because after that hte local variable
`org-agenda-markers' will have gone away.
(org-agenda-Quit):
(org-finalize-agenda): Install the marker resetter into
the `kill-buffer-hook'.
(org-agenda-save-markers-for-cut-and-paste): Look for markers in all
agenda buffers.
(org-agenda-kill-all-agenda-buffers): New function.
* org-agenda.el (org-agenda-tree-to-indirect-buffer): Fix handling of
indirect buffer and window.
Check if the window of last indirect buffer is still live and properly
handle the case of `org-last-indirect-buffer' being nil.
Changes suggested by Dave Abrahams in <m2boow1q9e.fsf@boostpro.com>.
* lisp/org-agenda.el (org-agenda-switch-to): Widen org buffer only if point is
outside the current restriction
Widen org buffer when visiting from agenda only if point is outside
current restriction.
Visiting a task with RET or TAB in the agenda should not affect the
org-mode buffer restriction unless the target task is not currently
visible due to the restriction.
* lisp/org-agenda.el (org-agenda-clock-in): Save restriction when clocking in from the agenda
Narrowed org buffers are now retained when clocking in from the agenda.
We only widen the buffer when the task to clock in is outside the existing
restriction.
* org-agenda.el: Add an alias for `org-agenda-filter'.
(diary-list-entries-hook): Use the non-obsolete hook.
(org-agenda-filter-apply): Silent compiler warning.
Rename `org-on-heading-p' and `org-on-target-p' to
`org-at-heading-p' and `org-at-target-p' to be more
consistent with the org-at-*-p family.
Also define two aliases.
* org-agenda.el (org-agenda-filter-preset): New alias.
(org-agenda-filter-by-category): New command.
(org-agenda-mode-map): Add the new command.
(org-agenda-custom-commands-local-options): Add category
filter preset.
(org-agenda-mark-filtered-text): Mark both tag and filter
overlays.
(org-agenda-category-filter-preset): New variable.
(org-finalize-agenda, org-agenda-redo)
(org-agenda-filter-make-matcher, org-agenda-filter-apply):
Handle both category and tag filters.
(org-agenda-filter-show-all-tag): Rename from
`org-agenda-filter-by-tag-show-all'.
(org-agenda-filter-show-all-cat): New function.
(org-agenda-set-mode-name): Show the category filter in the
modeline.
* org-faces.el (org-agenda-filter-category): New face.
* org.texi (Agenda commands): Update documentation about the
new category filtering feature.
This feature has been requested by several people -- thanks
to all of them for mentioning this possibility.
* org-agenda.el (org-agenda-write): Rename from
`org-write-agenda'.
(org-agenda-mode-map, org-agenda-menu)
(org-batch-store-agenda-views): Use new name
`org-agenda-write'.
* lisp/org-agenda.el (org-agenda-switch-to): Widen org buffer only if point is
outside the current restriction
Widen org buffer when visiting from agenda only if point is outside
current restriction.
Visiting a task with RET or TAB in the agenda should not affect the
org-mode buffer restriction unless the target task is not currently
visible due to the restriction.
* lisp/org-agenda.el (org-agenda-clock-in): Save restriction when clocking in from the agenda
Narrowed org buffers are now retained when clocking in from the agenda.
We only widen the buffer when the task to clock in is outside the existing
restriction.
* org-agenda.el (org-agenda-write-buffer-name): New variable.
(org-write-agenda): Use it.
Setting this variable through `org-agenda-exporter-settings' can
be useful -- thanks to Konstantin Ziegler for mentioning this need.
* org-agenda.el (org-agenda-do-tree-to-indirect-buffer): New
function.
(org-agenda-tree-to-indirect-buffer): Use the new function.
TINYCHANGE
Without this change, `org-agenda-follow-indirect' tends to cause the
window configration to bounce around chaotically as you move from item
to item.
* org-agenda.el (org-agenda-get-timestamps)
(org-agenda-get-sexps): Use face for highlighting "calendar"
events.
* org-faces.el: Add faces `org-agenda-calendar-event' and
`org-agenda-calendar-sexp'.
* org-agenda.el (org-agenda-set-mode-name): Highlight tags
used for filtering (shown in the mode-line).
* org-faces.el: Add face `org-agenda-filter-tags'.
* lisp/org-agenda.el (org-agenda-to-appt): Make sure filter-items are
strings before calling `string-match'.
Now it's possible to use (org-agenda-to-appt t '((headline "string"))).
TINYCHANGE
* org-agenda.el (org-agenda-to-appt): Allow to refine the
scope of entries to pass to `org-agenda-get-day-entries' and
allow to filter out entries using a function.
Thanks to Peter Münster for raising a related issue and to
Tassilo Horn for this idea.
* lisp/org-agenda.el (org-search-view): Simplify regexp.
(org-agenda-get-todos): Use new format string.
* lisp/org-archive.el (org-archive-all-done): Simplify regexp.
* lisp/org-ascii.el (org-export-as-ascii): More accurate regexp.
* lisp/org-colview-xemacs.el (org-columns-capture-view): Use new
format string and new string.
* lisp/org-colview.el (org-columns-capture-view): Use new format
string and new string.
* lisp/org-docbook.el (org-export-as-docbook): More accurate
regexp. Also use new regexp to match generic headlines.
* lisp/org-exp.el (org-export-protect-quoted-subtrees): More accurate
regexp. Also use new regexp to match generic headlines.
* lisp/org-html.el (org-export-as-html): More accurate regexp. Also
use new regexp to match generic headlines.
* lisp/org-mouse.el (org-mouse-match-todo-keyword): Removed unused
and now erroneous function.
* lisp/org.el (org-heading-regexp, org-heading-keyword-regexp-format):
New variables.
(org-set-regexps-and-options): Create regexps according to the
following rule: use spaces only to separate elements from an headline,
while allowing mixed tabs and spaces for any indentation job.
(org-nl-done-regexp, org-looking-at-done-regexp): Removed variables.
(org-set-font-lock-defaults): Fontify again headlines with a keyword
and no other text. Use new format strings.
(org-get-heading, org-toggle-comment, org-prepare-agenda-buffers,
org-toggle-fixed-width-section): Use new format string.
(org-todo): More accurate regexps.
(org-point-at-end-of-empty-headline): Simplify regexp.
(org-insert-heading): Headline can sometimes be nil.
This patch attempts to reduce the number of hard-coded headlines, by
providing two format strings and one generic string to cover most of
the cases of headline construction.
* org.el (org-format-agenda-item, org-scan-tags): Rename
`org-format-agenda-item' to `org-agenda-format-item'.
* org-agenda.el (org-search-view)
(org-get-entries-from-diary, org-agenda-get-todos)
(org-agenda-get-timestamps, org-agenda-get-sexps)
(org-agenda-get-progress, org-agenda-get-deadlines)
(org-agenda-get-scheduled, org-agenda-get-blocks)
(org-agenda-format-item, org-agenda-add-time-grid-maybe)
(org-agenda-change-all-lines)
(org-agenda-add-entry-to-org-agenda-diary-file): Rename
`org-format-agenda-item' to `org-agenda-format-item'.
Using the `org-agenda-' prefix makes more sense here.
Additionally, replace one
(or (org-mode-p) (derived-mode-p 'org-mode))
with
(derived-mode-p 'org-mode)
cause that is reflexive anyway (returns true, if the current mode is
org-mode).
Delete one check testing for org-mode or org derived mode
* lisp/org-agenda.el (org-agenda-move-date-from-past-immediately-to-today):
New option.
(org-agenda-date-later): Improve the logical structure.
* doc/org.texi (Agenda commands): Document that S-right on a line
representing a past date will immediately shift that date to today.
* lisp/org-agenda.el (org-agenda-follow-indirect): New option.
(org-agenda-follow-mode): Call `org-agenda-do-context-action' fro
follow mode.
(org-agenda-do-context-action): Also do indirect follow mode action.
By setting `org-agenda-follow-indirect' to a non-nil value,
`org-agenda-follow-mode' will use an indirect buffer to display only
the current item, rather than the whole agenda file in which it lives
Giovanni Ridolfi <giovanni.ridolfi@yahoo.it> writes:
> michael holzer <michi_holzer_news@gmx.at> writes:
>
>> When I have an entry that contains a time range, for example:
>>
>> * timerange
>> <2011-09-30 Fri 14:00>--<2011-09-30 Fri 18:00>
>>
>> this shows up in the agenda view as:
>>
>> uni: 14:00...... timerange
>>
>> while I would expect something like:
>>
>> uni: 14:00-18:00 timerange
>>
>
> |the manual says:
> |Time ranges can be specified with two timestamps,
> |like ‘<2005-05-10 Tue 20:30>--<2005-05-10 Tue 22:15>’.
> |
> | 20:30-22:15 Marvin escorts the Hitchhikers to the bridge
>
> I confirm this bug.
>
> Org-mode version 7.7 0e9d401519
> GNU Emacs 23.3.1 (i386-mingw-nt5.1.2600) of 2011-03-10 on 3249CTO
>
> Giovanni
>
>
Funny enough, I noticed this too last week, so I whipped up this patch.
It inserts the range when start date is the same as the end date. Please
test (it's still young) && include in Org if you so please.
#+begin_src diff
>From dcf81753aa5cab311f2a3a0272e4691e4bc6ea38 Mon Sep 17 00:00:00 2001
From: Niels Giesen <niels.giesen@gmail.com>
Date: Mon, 26 Sep 2011 11:43:55 +0200
Subject: [PATCH] Show timestamp ranges in agenda
* lisp/org-agenda.el (org-agenda-get-blocks): Show timestamp ranges in
agenda if start day is same as end day
* lisp/org.el (org-time-string-to-time):
(org-time-string-to-absolute): Add optional arguments BUFFER and POS
for error reporting.
* lisp/org-agenda.el (org-get-all-dates):
(org-agenda-get-timestamps):
(org-agenda-get-deadlines):
(org-agenda-get-scheduled):
(org-agenda-get-blocks): Call time stamp parsing functions with
information on where the timestamp was taken from.
* org-agenda.el (org-search-view, org-agenda-get-todos)
(org-agenda-get-deadlines, org-agenda-get-scheduled): Add
`category-pos' in let construct.
Thanks to Achim Gratz for spotting this.
* org-agenda.el (org-agenda-get-timestamps)
(org-agenda-get-sexps, org-agenda-get-progress): Correctly set
the `org-category-pos' property.
Thanks to Michael Brand for signaling this problem, and to Nick
Dokos and Erik Iverson for confirming it.
* org.el (org-refresh-category-properties): New text property
'org-category-position to point at the beginning of the
headline from which the category is set.
* org-agenda.el (org-search-view, org-agenda-get-todos)
(org-agenda-get-timestamps, org-agenda-get-sexps)
(org-agenda-get-progress, org-agenda-get-deadlines)
(org-agenda-get-scheduled, org-agenda-get-blocks)
(org-agenda-filter-by-tag-refine): Add the
'org-category-position text property.
This commit prepares for a future `org-agenda-set-category'
function allowing to set the category of the headline at point.
* lisp/org-agenda.el (org-agenda-include-all-todo): Declare this
option as no longer working.
(org-timeline): Rename the include-all argument to dotodo.
(org-arg-loc): Renamed from` org-include-all-loc'.
(org-agenda-list): Rename the INCLUDE-ALL argument to ARG, because its
function has changed.
Also remove blank lines before the ";;; org*el ends here" declarations.
Having a "Version" header forced us to update every file when releasing a
new version of Org; it also forced us to update every file when merging Org
with Emacs trunk, thus cluttering the diffs between the previously merged
version and the new one with useless information.
Glenn Morris suggested this in emacs-devel:
http://lists.gnu.org/archive/html/emacs-devel/2011-08/msg00322.html
* lisp/org-agenda.el (org-agenda-get-deadlines): Fix dfrac for the
case of wdays being 0. Don't pass wdays to org-agenda-deadline-face,
like before the old fix.
(org-agenda-deadline-face): Revert to old state that was without
wdays.
This allows a deadline warning period of "-0d" to work also with a
custom configuration like:
(setq org-agenda-deadline-faces
'((1.0001 . org-warning) ; due yesterday or before
(0.0 . org-upcoming-deadline))) ; due today or later
For org-agenda-deadline-faces left at default and all other settings
not exceeding 1.0, the face for a deadline warning of any length
remains untouched by this patch.
references to history:
* commit of the old fix
- http://orgmode.org/w/?p=org-mode.git;a=commitdiff;h=d0d6325
- git show d0d6325
* mailing list old thread
- http://thread.gmane.org/gmane.emacs.orgmode/5753
- http://lists.gnu.org/archive/html/emacs-orgmode/2008-02/msg00395.html
,----
| The functions `org-batch-agenda', `org-batch-agenda-csv', and
| `org-batch-store-agenda-views' are implemented as macros to provide
| a conveniant way for extracting agenda information from the command
| line. The Lisp does not evaluate parameters of a macro call; thus
| it is not necessary to quote the parameters passed to one of those
| functions. E.g. you can write:
|
| emacs -batch -l ~/.emacs -eval '(org-batch-agenda "a" org-agenda-span 7)'
|
| To export an agenda spanning 7 days. If `org-batch-agenda' would
| have been implemented as a regular function you'd have to quote the
| symbol org-agenda-span. Moreover: To use a symbol as parameter
| value you would have to double quote the symbol.
|
| This is a hack, but it works even when running Org byte-compiled.
`----
Use `org-outline-regexp' instead or `outline-regexp'. Also use the
new defconst `org-outline-regexp-bol' to match `org-outline-regexp'
at the beginning of line.
* org.el (org-outline-regexp-bol): New defconst.
(org-outline-level, org-set-font-lock-defaults, org-cycle)
(org-overview, org-content, org-flag-drawer)
(org-first-headline-recenter, org-insert-todo-heading)
(org-map-region, org-move-subtree-down, org-paste-subtree)
(org-kill-is-subtree-p, org-context-p, org-refile)
(org-refile-new-child, org-toggle-comment, org-todo)
(org-add-planning-info, org-add-log-setup, org-scan-tags)
(org-set-tags, org-insert-property-drawer)
(org-prepare-agenda-buffers, org-preview-latex-fragment)
(org-speed-command-default-hook, org-check-for-hidden)
(org-toggle-item, org-toggle-heading)
(org-indent-line-function, org-set-autofill-regexps)
(org-fill-paragraph, org-toggle-fixed-width-section)
(org-yank-generic, org-yank-folding-would-swallow-text)
(org-first-sibling-p, org-goto-sibling)
(org-goto-first-child, org-show-entry): Use
`org-outline-regexp' and `org-outline-regexp-bol'.
* org-remember.el (org-remember-handler): Use
`org-outline-regexp-bol'.
* org-mouse.el (org-mouse-match-todo-keyword, org-mode-hook)
(org-mouse-move-tree, org-mouse-transform-to-outline): Use
`org-outline-regexp' and `org-outline-regexp-bol'.
* org-macs.el (org-with-limited-levels)
(org-get-limited-outline-regexp): Use `org-outline-regexp'.
* org-indent.el (org-indent-outline-re)
(org-indent-refresh-section, org-indent-refresh-to): Use
`org-outline-regexp' and `org-outline-regexp-bol'.
* org-html.el (org-export-as-html): Use
`org-outline-regexp-bol'.
* org-footnote.el (org-footnote-at-definition-p)
(org-footnote-normalize): Use `org-outline-regexp' and
`org-outline-regexp-bol'.
* org-exp.el (org-export-preprocess-string): Don't redefine
`outline-regexp'.
* org-docbook.el (org-export-as-docbook): Use
`org-outline-regexp-bol'.
* org-colview.el (org-columns, org-columns-compute): Use
`org-outline-regexp' and `org-outline-regexp-bol'.
* org-colview-xemacs.el (org-columns, org-columns-compute):
Use `org-outline-regexp-bol'.
* org-clock.el (org-clock-insert-selection-line)
(org-clock-in, org-clock-out, org-dblock-write:clocktable):
Use `org-outline-regexp' and `org-outline-regexp-bol'.
* org-ascii.el (org-export-as-ascii)
(org-export-ascii-push-links): Use `org-outline-regexp' and
`org-outline-regexp-bol'.
* org-archive.el (org-archive-to-archive-sibling)
(org-archive-all-done): Use `org-outline-regexp' and
`org-outline-regexp-bol'.
* org-agenda.el (org-agenda, org-search-view)
(org-agenda-list-stuck-projects, org-agenda-get-timestamps)
(org-agenda-get-progress, org-agenda-get-blocks): Use
`org-outline-regexp' and `org-outline-regexp-bol'.
* org-agenda.el (org-agenda-bulk-custom-functions): New
variable for custom bulk action functions.
(org-agenda-bulk-action): Use it.
Thanks to Julien Cubizolles for triggering this idea.
This reverts commit 5a2eec3207.
The replacement of `buffer-substring-filters' by
`filter-buffer-substring-functions' requires some rewriting
of functions like `org-indent-remove-properties-from-string'.
* org-agenda.el (org-agenda-compact-blocks): Improve docstring.
(org-agenda-block-separator): Add nil to docstring and customization.
(org-prepare-agenda): Skip agenda block separator additionally if
org-agenda-block-separator is nil.
(org-agenda-overriding-header): Improve docstring.
This change allows to disable the agenda block separator only and also
per block only. (The variable org-agenda-compact-blocks non-nil
disables agenda block separators together with the line containing the
agenda span name and week number and does this globally for all blocks
and all custom agenda commands.)
* lisp/ob.el (org-babel-sha1-hash): Adding optional argument KIND to
all org-called-interactively-p function invocations.
* lisp/org-agenda.el (org-agenda-redo): Adding optional argument KIND to
all org-called-interactively-p function invocations.
(org-agenda-show-1): Adding optional argument KIND to all
org-called-interactively-p function invocations.
(org-agenda-set-tags): Adding optional argument KIND to all
org-called-interactively-p function invocations.
* lisp/org-ascii.el (org-export-as-latin1): Adding optional argument
KIND to all org-called-interactively-p function invocations.
(org-export-as-latin1-to-buffer): Adding optional argument KIND to
all org-called-interactively-p function invocations.
(org-export-as-utf8-to-buffer): Adding optional argument KIND to all
org-called-interactively-p function invocations.
(org-export-region-as-ascii): Adding optional argument KIND to all
org-called-interactively-p function invocations.
* lisp/org-docbook.el (org-export-region-as-docbook): Adding optional
argument KIND to all org-called-interactively-p function
invocations.
* lisp/org-html.el (org-export-region-as-html): Adding optional
argument KIND to all org-called-interactively-p function
invocations.
* lisp/org-latex.el (org-export-region-as-latex): Adding optional
argument KIND to all org-called-interactively-p function
invocations.
* lisp/org-table.el (org-table-blank-field): Adding optional argument
KIND to all org-called-interactively-p function invocations.
(org-table-current-column): Adding optional argument KIND to all
org-called-interactively-p function invocations.
(org-table-current-dline): Adding optional argument KIND to all
org-called-interactively-p function invocations.
(org-table-sort-lines): Adding optional argument KIND to all
org-called-interactively-p function invocations.
(org-table-sum): Adding optional argument KIND to all
org-called-interactively-p function invocations.
(org-table-rotate-recalc-marks): Adding optional argument KIND to
all org-called-interactively-p function invocations.
(org-table-eval-formula): Adding optional argument KIND to all
org-called-interactively-p function invocations.
(orgtbl-send-table): Adding optional argument KIND to all
org-called-interactively-p function invocations.
* lisp/org.el (org-mode): Adding optional argument KIND to all
org-called-interactively-p function invocations.
(org-copy-subtree): Adding optional argument KIND to all
org-called-interactively-p function invocations.
(org-paste-subtree): Adding optional argument KIND to all
org-called-interactively-p function invocations.
(org-store-link): Adding optional argument KIND to all
org-called-interactively-p function invocations.
(org-todo): Adding optional argument KIND to all
org-called-interactively-p function invocations.
(org-occur): Adding optional argument KIND to all
org-called-interactively-p function invocations.
Interactive-p is an obsolete function as of Emacs 23.2.
`org-called-interactively-p' takes care of the current (x)Emacs
version and use either `interactive-p' (for XEmacs and Emacs<23.2)
or `called-interactively-p'.
* lisp/org-agenda.el (org-float): Aliases for `diary-float'.
This is just to make sure that all the diary sexp functions
have org- equivalents. org-float is just an alias because no
arguments need to be switched around.
* lisp/org-agenda.el (org-agenda-add-entry-to-org-agenda-diary-file):
Use stable internal `org-anniversary' instead of diary-anniversary.
(org-class): New function.
(org-diary-class): Use `org-class'.
(org-anniversary, org-cyclic, org-date, org-block): New functions.
This patch provides stable alternatives for a number of diary
functions to be used in diary sexp entries. The corresponding diary-*
functions swap around their input arguments depending on
`calendar-date-style', which is unstable and evil. The functions
provided here have a fixed order of arguments, the ISO order: year
month day.
Also, the `i a' key in the agenda now uses `org-anniversary' instead of
diary-anniversary.
* lisp/org-agenda.el (org-agenda-redo): Replacing call to now-defunct
function `interactive-p'.
(org-agenda-show-1): Replacing call to now-defunct function
`interactive-p'.
(org-agenda-set-tags): Replacing call to now-defunct function `interactive-p'.
* lisp/org-ascii.el: Replacing call to now-defunct function
`interactive-p'.
(org-export-as-latin1): Replacing call to now-defunct function
`interactive-p'.
(org-export-as-latin1-to-buffer): Replacing call to now-defunct
function `interactive-p'.
(org-export-as-utf8): Replacing call to now-defunct function
`interactive-p'.
(org-export-as-utf8-to-buffer): Replacing call to now-defunct function
`interactive-p'.
(org-export-region-as-ascii): Replacing call to now-defunct function
`interactive-p'.Replacing call to now-defunct function `interactive-p'.
* lisp/org-docbook.el: Replacing call to now-defunct function
`interactive-p'.
(org-export-region-as-docbook): Replacing call to now-defunct function
`interactive-p'.Replacing call to now-defunct function `interactive-p'.
* lisp/org-html.el: Replacing call to now-defunct function
`interactive-p'.
(org-export-region-as-html): Replacing call to now-defunct function
`interactive-p'.Replacing call to now-defunct function `interactive-p'.
* lisp/org-latex.el: Replacing call to now-defunct function
`interactive-p'.
(org-export-region-as-latex): Replacing call to now-defunct function
`interactive-p'.Replacing call to now-defunct function `interactive-p'.
* lisp/org-macs.el: Replacing call to now-defunct function
`interactive-p'.
(org-called-interactively-p): Replacing call to now-defunct function
`interactive-p'.Replacing call to now-defunct function `interactive-p'.
* lisp/org-table.el: Replacing call to now-defunct function
`interactive-p'.
(org-table-blank-field): Replacing call to now-defunct function
`interactive-p'.
(org-table-current-column): Replacing call to now-defunct function
`interactive-p'.Replacing call to now-defunct function
`interactive-p'.
(org-table-current-dline): Replacing call to now-defunct function
`interactive-p'.Replacing call to now-defunct function
`interactive-p'.
(org-table-sort-lines): Replacing call to now-defunct function
`interactive-p'.
(org-table-sum): Replacing call to now-defunct function
`interactive-p'.
(org-table-rotate-recalc-marks): Replacing call to now-defunct
function `interactive-p'.
(org-table-eval-formula): Replacing call to now-defunct function
`interactive-p'.
(orgtbl-send-table): Replacing call to now-defunct function `interactive-p'.
* lisp/org.el: Replacing call to now-defunct function `interactive-p'.
(org-mode): Replacing call to now-defunct function `interactive-p'.
(org-copy-subtree): Replacing call to now-defunct function
`interactive-p'.
(org-paste-subtree): Replacing call to now-defunct function
`interactive-p'.
(org-store-link): Replacing call to now-defunct function
`interactive-p'.
(org-todo): Replacing call to now-defunct function `interactive-p'.
(org-occur): Replacing call to now-defunct function `interactive-p'.
* lisp/org-agenda.el (org-agenda-bulk-action): Fix bug caused by
`days-to-time, converting relative to 1 BC, while the code assumed it
would return a time relative to 1970.
For more information, see
http://thread.gmane.org/gmane.emacs.orgmode/42531
* lisp/org-agenda.el (org-agenda-get-todos): Call `org-agenda-skip' first,
then check if timestamps cause exclusion.
* lisp/org.el (org-scan-tags): Call `org-agenda-skip' first,
then check if timestamps cause exclusion.
For more information, see the following mailing list thread:
http://thread.gmane.org/gmane.emacs.orgmode/41052/focus=41052
charles.sebold@lcms.org writes:
> On 7 Apr 2011, Charles Sebold wrote:
>
>> Here's a test. Take the line below and put it in an agenda file, then
>> view the agenda.
>>
>> %%(format "%s" (concat "[[elisp:(info)]" "[Link to info]]"))
>>
>> The results as I see them give me a link that I can mouse-click on,
>> but I can't move point to it and hit C-c C-o.
>>
>> What do I need to do to make this a normal org link in every way? Or
>> is this a bug?
>>
Here's what seems to be going on.
Clicking with the mouse works because it calls org-open-at-mouse, which
(by calling org-open-at-point) simply looks at the text surrounding the
click point to find a link.
The function org-agenda-open-link, on the other hand, grabs part of the
headline as a string (the prefix), then jumps to the location in the
original buffer and calls org-offer-links-in-entry to look for links in
both the entry and the prefix of agenda text. Obviously, it won't find
your link in the original entry since it looks like this:
%%(format "%s" (concat "[[elisp:(info)]" "[Link to info]]"))
I think it shouldn't be a problem to pass the whole agenda line to
org-offer-links-in-entry. This will not result in duplicate links, since
org-offer-links-in-entry "uniquifies" the links.
I've attached a patch.
The bigger question, however, is why the expression above is even
showing up in the agenda, since it contains no scheduling information.
:)
Best,
Matt
>From 58c7621c0c84b9c1930098a098e4559aa516eec0 Mon Sep 17 00:00:00 2001
From: Matt Lundin <mdl@imapmail.org>
Date: Tue, 3 May 2011 15:54:35 -0400
Subject: [PATCH] Pass entire text of agenda line to org-offer-links-in-entry.
* lisp/org-agenda.el (org-agenda-open-link): Pass entire text of
agenda line to org-offer-links-in-entry.
This fixes bug noticed by Charles Sebold, in which links that are
dynamically formatted for the agenda view are ignored.
http://permalink.gmane.org/gmane.emacs.orgmode/40673
lisp/org-agenda.el (org-agenda-set-tags): Remove org-agenda-show to prevent
disrupting windows and changing point in original buffer.
(org-agenda-set-property): Same
(org-agenda-set-effort): Same
(org-agenda-toggle-archive-tag): Same
When setting a tag in the agenda, org-mode displays the corresponding
entry in the original org buffer by calling org-agenda-show. This has
the unwelcome side-effect of disrupting the current window arrangement
and changing the position of the point in the original buffer. This
behavior is inconsistent with the that of org-agenda-todo, which makes
all its changes "silently."
Here is the offending line (6799) in org-agenda-set-tags:
--8<---------------cut here---------------start------------->8---
(org-agenda-show) ;;; FIXME This is a stupid hack and should not be needed
--8<---------------cut here---------------end--------------->8---
The same line occurs in org-agenda-set-property, org-agenda-set-effort,
and org-agenda-toggle-archive tag.
* lisp/org-agenda.el (org-agenda-clock-consistency-checks): New option.
(org-agenda-list): Handle display change to clock check.
(org-agenda-get-progress): Show only clock entries if we are doing the
consistency check.
(org-agenda-show-clocking-issues): New function.
(org-agenda-check-clock-gap): New function.
(org-agenda-view-mode-dispatch): Offer consistency check.
(org-agenda-log-mode): Handle switch to clock only display.
(org-agenda-set-mode-name): Show lighter for Clockcheck.
* lisp/org.el (org-hh:mm-string-to-minutes): Accept an integer argument
and return it unchanged.
* doc/org.texi (Agenda commands): Document clock consistency checks.
* doc/orgcard.tex: Document key for clock consistency check.
* lisp/org-agenda.el (org-agenda-get-timestamps): Fix agenda display when headlines are missing
The following entry breaks the agenda display.
,----
| ****
| :PROPERTIES:
| :DateCreated: <2011-04-13 Mi 10:00>
| :END:
|
| [[gnus:nntp%2BGwene:gwene.org.emacsen.planet][gnus:nntp+Gwene:gwene.org.emacsen.planet]]
`----
Provide the empty string as the headline if the search for the
headline returns nil. org-format-agenda-items requires a string for
the headline parameter.
* lisp/org-agenda.el (org-agenda-bulk-action): Allow bulk scatter
in all possible agenda views. Use `org-agenda-schedule' instead of
`org-agenda-date-later'.
The bulk scatter command so far shifted the date that was causing an
entry to appear in the agenda. However, the true intend was to
reschedule onto dates in the near future. This patch fixes this
issue. A side effect is that you can now bulk scatter tasks that to
not yet have a date, for example also tasks picked from the TODO
list.
* lisp/org-agenda.el: Remove obsolete code for adding todo list in front
of the agenda
Todo lists should be built with the TODO list or a block agenda instead.
This code was triggered for C-u R in block agendas which is used to
limit the clock report to the current tags filter applied to the
agenda.
Luke Crook wrote:
> Is it possible to specify estimated effort in something other
> than hours (0.5, or 0:30)?
> For example 1w, 1m, 2d etc?
Here's a cleaned up patch that allows user-specified modifiers
for effort strings. The new variable `org-effort-durations'
lists modifiers, and their mapping to minutes (words, as well as
single-letter modifiers, are supported). The default value is:
(("h" . 60)
("d" . 480) ; 8 hours
("w" . 2400) ; five days
("m" . 9600) ; 4 weeks
("y" . 96000)) ; 40 weeks
But you can change this.
Old effort strings (HH:MM) are still interpreted correctly. See
the docstrings of `org-effort-durations' and
`org-duration-string-to-minutes' for more details.
>From a0e24b14755eb4087d9c47bb4eea11eb9151efcf Mon Sep 17 00:00:00 2001
From: Lawrence Mitchell <wence@gmx.li>
Date: Fri, 18 Feb 2011 11:01:46 +0000
Subject: [PATCH] Allow human-readable effort durations
To: emacs-orgmode@gnu.org
* lisp/org.el (org-effort-durations): New variable.
* lisp/org.el (org-duration-string-to-minutes): New function.
* lisp/org-agenda.el (org-agenda-filter-effort-form)
(org-format-agenda-item): Use it.
* lisp/org-clock.el (org-clock-notify-once-if-expired)
(org-clock-modify-effort-estimate, org-clock-get-clock-string): Use it.
Specifying large effort durations in hours and minutes is difficult.
Is 130:25 more than two weeks effort? More than three? This patch
allows specification of an effort duration as a friendly string. For
example 2w 5d is two weeks and five days of effort. Existing H:MM
entries will still be recognised correctly.
* org-agenda.el (org-agenda): Set the 'last-args property to
nil when calling `org-agenda'. Don't kill the local variable
`org-agenda-current-span'.
(org-run-agenda-series): Use the new property 'last-args.
(org-agenda-change-time-span): Use the dynamically set
`org-agenda-overriding-arguments' variable when non-nil.
Thanks to Matt Lundin and Michael Brand for reporting this.
* org-agenda.el (org-agenda-date-later)
(org-agenda-date-earlier): Enhance docstrings.
(org-agenda-bulk-mark-regexp): Only match against headlines.
Send a message when no entry is marked.
(org-agenda-bulk-action): Fix bug about scattering deadlines.
Send an error when trying to scatter outside an agenda or a
timeline view. Silently fail when trying to scatter sexp
entries.
* org-agenda.el (org-get-entries-from-diary): Put multiline
diary entries on a single line when lines don't start with a
diary time.
This was requested by Suvayu Ali.
Locally kill org-agenda-current-span as a variable, otherwise
the current value of org-agenda-current-span is taken as the
default value when redoing the buffer or calling org-agenda
with a different view.
This might be a temporary fix, as Julien is looking for a
more general solution. See his message here:
http://article.gmane.org/gmane.emacs.orgmode/37359
* lisp/org-agenda.el (org-agenda-filter-by-tag): Refresh agenda when
updating the filter while the clock report is following the filter.
When the clock table in the agenda has been set up to respect the
current agenda tags filter, modifying the filter will now
automatically rebuild the agenda to make sure that also the clock
report is updated along with it. Updating the entire agenda is not
strictly necessary - updating the table would be enough. However,
right now we do not really have a function that will update only the
clock table, as inserting the table is currently part of building the
agenda itself. Maybe someone can optimize this in the future.
This feature was requested by Sebastien Vauban.
On Sat, Feb 05 2011, Matt Lundin wrote:
> This results in only a day view because org-agenda-current-span is still
> 'day.
Here's a proposal fix.
I could have setq org-agenda-current-span to nil as a work around, but
it seems more logical to just kill all the local variables. That is, a
custom agenda view would not keep any of the local variable of the
previous agenda, which seems logical to me.
>From b48fc7c395dffea60df20c23b26e362ac0354b01 Mon Sep 17 00:00:00 2001
From: Julien Danjou <julien@danjou.info>
Date: Mon, 7 Feb 2011 12:36:42 +0100
Subject: [PATCH] org-agenda: kill local variables in agenda view
* org-agenda.el (org-agenda): Kill all local variables. This
assures we are not keeping buffer variable from an old agenda view
when switching to a new custom agenda.
Signed-off-by: Julien Danjou <julien@danjou.info>
* lisp/org-agenda.el (org-agenda-get-day-entries): Compare DATE with
modified today.
When a user sets org-extend-today-until, the agenda TODO list would
come up empty when requested in the extension period between midnight
and org-extend-today-until. This problem is new, it was caused by a
patch that introduced the function org-today and used it also
in org-todo-list.
The reason why this caused a problem is a bit difficult. The agenda
need a date to be defined, and getting todo entries is subject to the
current date being today. This is a leftover condition from the times
when the TODO list was often part of the daily agenda listing, and the
test is there to avoid that the TODO list comes also up when looking
at the agenda for tomorrow. Much of this is irrelevant now, because
people use either block agendas, or separate views - but the old
functionality is retained for backward compatibility.
This patch fixes the problem by making `org-agenda-get-day-entries'
check for the date computed by `org-today'.
* org-agenda.el (org-agenda-bulk-mark-regexp): New command.
(org-agenda-menu): Add the new command to the menu.
(org-agenda-mode-map): Add % as the keybinding for the new
command.
* org-agenda.el (org-agenda-repeating-timestamp-show-all):
Allow to use a list of TODO keywords as the value of this
variable. The agenda will show repeating stamps for entries
matching these TODO keywords.
(org-agenda-get-timestamps, org-agenda-get-deadlines)
(org-agenda-get-scheduled): Allow the use of a list of
keywords in `org-agenda-repeating-timestamp-show-all'.
---
This was suggested by Jeff Horn and supported by Detlef Steuer.
On Mon, Jan 17 2011, Carsten Dominik wrote:
> have you been following this thread? I think this has to do with your
> rewrite of the dagenda span stuff. Maybe you can find out better and
> faster that I why this goes wrong? Please read the entire thread.
I've followed but not sure I understood what the bug is. But from my
various tries, I found a bug: when pressing 'j', the current span is
discarded.
Attached is a patch that should fix that, even for future use of
`org-agenda-list' with the span unspecified. :)
>From 9dd2fe6650b858a4083ebc083bb8d10a0d6ac7f2 Mon Sep 17 00:00:00 2001
From: Julien Danjou <julien@danjou.info>
Date: Mon, 17 Jan 2011 16:05:28 +0100
Subject: [PATCH] Fix agenda span on date jump
* org-agenda.el (org-agenda-list): Use org-agenda-current-span as a
possible default span if it is set.
Signed-off-by: Julien Danjou <julien@danjou.info>
* org-agenda.el (org-agenda-get-progress): Fix regexp for statep: it
must has \\ at the end of the line. This avoid matching the following
heading when there's no newline between the logged state and the next
heading.
Signed-off-by: Julien Danjou <julien@danjou.info>
* lisp/org-agenda.el: (org-agenda-todo-ignore-deadlines): New option.
(org-agenda-todo-ignore-scheduled): New option.
(org-agenda-todo-ignore-timestamp): New option.
(org-agenda-check-for-timestamp-as-reason-to-ignore-todo-item): Allow user
to specify custom distance to ignore (future or past).
(org-agenda-todo-custom-ignore-p): New function.
This patch gives users greater control over which past or future items
they would like to ignore in the global todo list. By setting
org-agenda-todo-ignore-scheduled to 7, for instance, a user can ignore
all items scheduled 7 or more days in the future. Similarly, by
setting org-agenda-todo-ignore-scheduled to -1, a user can ignore all
items that are truly in the past (unlike the 'past setting, which
ignores items scheduled today). Thanks to Paul Sexton for the idea for
this new functionality.
* org-agenda.el (org-agenda-get-blocks): Fix time of start/end
of events with range. This display things like:
<2011-01-22 Sat 14:00>--<2011-01-23 Sun 20:00>
correctly, with the event starting at 14:00 and ending at 20:00.
Signed-off-by: Julien Danjou <julien@danjou.info>
On Mon, Jan 17 2011, Bernt Hansen wrote:
>
> Thanks for this patch. I think this fixes the issue I was having with
> 'j' in the agenda switching from week-view back to single-day view when
> org-agenda-ndays is set to 1.
>
> There is still a (new?) problem with jumping to today.
>
> Set the following variable
>
> (setq org-agenda-start-on-weekday 6)
>
> | Key Sequence | Notes |
> |--------------+------------------------------------------------|
> | C-c a a | Display weekly agenda |
> | f | Go forward a week |
> | d | Display day agenda |
> | . | Go to to day - but it goes to Saturday instead |
>
> This should go to today and not the first day of the week.
Attached is a fix for that.
>From f566a5612560f997f4760144ca850dda5c06bc5e Mon Sep 17 00:00:00 2001
From: Julien Danjou <julien@danjou.info>
Date: Mon, 17 Jan 2011 18:09:30 +0100
Subject: [PATCH] Fix org-agenda-goto-today not respecting the current span.
* org-agenda.el (org-agenda-goto-today): Respect current span.
Signed-off-by: Julien Danjou <julien@danjou.info>
* lisp/org-agenda.el (org-agenda-skip-function-global): New option.
(org-agenda-skip-eval): New function.
(org-agenda-skip): Use `org-agenda-skip-eval' and also check for the
global skipping condition.
This was a request by John Wiegley
* lisp/org-agenda.el (org-agenda-goto): Display invisible entry text
* lisp/org-agenda.el (org-agenda-switch-to): Display invisible entry text
Visiting clock lines with RET or TAB in the agenda can put point on a
folded clock drawer. This means you are editing invisible/hidden text
inside the task entry. Now when moving to invisible regions show the
entry so point is always visible.
* lisp/org-agenda.el: (org-agenda-get-scheduled) Don't call
org-is-habit-p until after checking for for
org-agenda-skip-scheduled-if-done.
Org-agenda-get-scheduled was calling org-is-habit-p on every scheduled
item (including DONE items when org-agenda-skip-scheduled-if-done was
set to t). Tweaking the timing of the test shaves some time off of
agenda construction when org-habit is loaded and
org-agenda-skip-scheduled-if-done is t.
Before: org-is-habit-p 478 0.2434439999 0.0005092970
After: org-is-habit-p 81 0.057944 0.0007153580
* lisp/org-faces.el (org-agenda-current-time): New face.
* lisp/org-agenda.el (org-agenda-show-current-time-in-grid):
(org-agenda-current-time-string): New options.
(org-agenda-add-time-grid-maybe): Add current time to time grid.
suvayu ali <fatkasuvayu+linux@gmail.com> writes:
> I actually tried to set the text properties for the string instead,
> but looks like org-agenda is ignoring that.
>
> (defun jd:org-current-time ()
> "Return current-time if date is today."
> (when (equal date (calendar-current-date))
> (propertize (format-time-string "%H:%M Current time") 'font-lock-face
> '(:weight bold :foreground "DodgerBlue4" :background "snow"))))
To accomplish this you'd have to apply the following patch and use 'face
property rather than font-lock-face.
Why can't a sexp choose its 'face after all?
--8<---------------cut here---------------start------------->8---
--8<---------------cut here---------------end--------------->8---
B S will cause tasks to be rescheduled a random number of days into the
future, with 7 as the default. This is useful if you've got a ton of
tasks scheduled for today, you realize you'll never deal with them all,
and you just want them to be distributed across the next N days.
* org-agenda.el (org-agenda-custom-commands-local-options):
Allow org-agenda-span to be a symbol.
(org-agenda-ndays): Make obsolete.
(org-agenda-span): New variable superseding org-agenda-ndays.
(org-agenda-menu): Use org-agenda-current-span.
(org-agenda-current-span): New local variable storing current
span.
(org-agenda-list): Take a span instead of ndays as argument.
This function is now responsible for computing the ndays based
on span.
(org-agenda-ndays-to-span): Return span only if number of days
really matches.
(org-agenda-span-to-ndays): New function.
(org-agenda-manipulate-query): Use org-agenda-compute-starting-span.
(org-agenda-goto-today): Use org-agenda-compute-starting-span.
(org-agenda-later): Do not give compute a new span, use the
current one.
(org-agenda-day-view, org-agenda-week-view)
(org-agenda-month-view, org-agenda-year-view): Stop touching
org-agenda-ndays.
(org-agenda-change-time-span): Only compute starting-span.
(org-agenda-compute-starting-span): New function derived from
the old org-agenda-compute-time-span.
(org-agenda-set-mode-name): Compute mode based on
org-agenda-current-span.
(org-agenda-span-name): New function.
* org-mouse.el: Replace Replace org-agenda-ndays by
org-agenda-current-span.
* org.texi, orgguide.texi: Replace org-agenda-ndays by
org-agenda-span. Add a paragraph about org-agenda-span and say that
org-agenda-ndays is now deprecated.
This patch is pretty huge, so I'll give a bit of context about it.
I'm weird, but I used org-agenda-ndays set to 14. Unfortunately, this
settings was interpreted as a month view. Pressing 'f' key to see later,
would show me the next month, which was not at all what I wanted.
On the same idea, day view or week view would change my org-agenda-ndays
settings, which I think is not a good idea. Changing user setting is *bad*.
:-)
So I rewrote the things this way:
- Rename org-agenda-span to org-agenda-current-span
Which has the same meaning has before, except it can be numeric.
- Rename org-agenda-ndays to org-agenda-span
I think the name is better choosen. You can set it to a symbol instead of
only a numeric value. That means you can set it to 'month and it will show
you the number of days of the current month in your agenda. Better than
30. But you can still set it to 30, or 31, or whatever you want.
- Do not change org-agenda-span. Never.
- Use org-agenda-current-span for navigation.
That means if you press 'f', it will shows you really the next
org-agenda-current-span ndays, and not something based on "I think you
want a weekly view".
* lisp/org-agenda.el: (org-format-agenda-item) The value of
org-category is not converted to a string unless it is defined.
This fixes commit 3061c7083d, which
resulted in org-format-agenda-item always returning the symbol-name for
org-category even if it was not defined. I.e., in some instances,
org-format-agenda-item returned the string "nil", thus bypassing the
buffer-file-name method of deriving the category.
* org-agenda.el (org-format-agenda-item): Convert category to a string
if it is a symbol. This fixes the following call to
org-agenda-get-category-icon which fails if category is not a string.
Signed-off-by: Julien Danjou <julien@danjou.info>
* lisp/org-agenda.el (org-agenda-timegrid-use-ampm): New option.
(org-agenda-time-of-day-to-ampm): New function.
(org-agenda-time-of-day-to-ampm-maybe): New function.
(org-format-agenda-item): Call org-agenda-time-of-day-to-ampm-maybe.
Patch by Christoph Allen Webber
* lisp/org-agenda.el (org-agenda-today): New function.
(org-agenda-get-day-face): New function.
(org-timeline): Use org-agenda-today and org-agenda-get-day-face.
(org-agenda-list): Use org-agenda-today and org-agenda-get-day-face.
(org-todo-list): Use org-agenda-today.
(org-get-all-dates): Use org-agenda-today.
(org-agenda-day-face-function): New variable.
(org-agenda-get-day-face): Use org-agenda-day-face-function.
Signed-off-by: Julien Danjou <julien@danjou.info>
Signed-off-by: Julien Danjou <julien@danjou.info>
* doc/org.texi (Categories): Document category icons.
* lisp/org-agenda.el (org-agenda-prefix-format): Insert place holder for icon.
(org-agenda-category-icon-alist): New option.
(org-agenda-get-category-icon): New function.
(org-format-agenda-item): Support for icons.
(org-compile-prefix-format): Support for icons.
* lisp/org.el (org-shorten-string): New function.
* lisp/org-exp.el (org-export-convert-protected-spaces): New function.
(org-export-preprocess-string): Call
`org-export-convert-protected-spaces' to handle new hard spaces.
* lisp/org-clock.el (org-clocktable): New customization group.
(org-clocktable-defaults): New option.
(org-clock-clocktable-formatter): New option.
(org-clock-clocktable-default-properties): New option.
(org-dblock-write:clocktable): Rewrite to split out functionality
into separate functions.
(org-clocktable-write-default):
(org-clocktable-indent-string):
(org-clock-get-table-data): New functions.
* lisp/org-agenda.el (org-agenda-list):
(org-agenda-redo):
(org-agenda-clockreport-mode):
(org-agenda-set-mode-name): Rewrite to implement filtered clock tables.
* doc/org.texi (Clocking commands):
(The clock table): New sections.
(Agenda commands): Document filtered clock reports.
* lisp/org-agenda.el (org-agenda-get-sexps): Handle lists as return values
from diary entries
* lisp/org-bbdb.el (org-bbdb-anniversaries): Handle lists of anniversaries
* lisp/org.el (org-diary-sexp-entry): Handle lists as return values
from diary entries.
ukasz Stelmach <lukasz.stelmach@iem.pw.edu.pl> writes:
> I've disovered, that %%(org-bbdb-anniversaries) returns (as every other
> sexp) a string. Which is OK if there is only one.
>
> Anniversaries: John Doe's 10th wedding anniversary
>
> Unfortunately the agenda view becomes awful if we have noted Jane's
> weeding date too
>
> Anniversaries: John Doe's 10th wedding anniversary; Jane Doe's 10th wedding anniversary
>
> And what if we know 3 Eves and 5 Adams and it's Christmas Eve? (Hint:
> their name day)
[...]
As Thomas Bauman pointed out, there are functions that can be used in
sexps which return cons cells like this
(nil . "Full Moon 3:35am (CEST)")
(this one is diary-lunar-phases), these aren't properly supported by the
previous version of my patch. This one can distinguish between such a
cons cell and a "real" list.
("John Doe's 10th wedding anniversary"
"Jane Doe's 10th wedding anniversary")
This is because
(consp (cdr '(a . b))) ; => nil
so org-diary-sexp-entry can be made return (cdr result) only in case of
the former cons cell. The third condition in the `cond' block is IMHO
enough as it is now, but if you think adding
(listp (cdr result))
may help then be it.
* lisp/org-agenda.el (org-agenda-add-time-grid-maybe): Pad clock times
with zeros. Start applying face earlier.
Hello,
Here a tiny patch to:
- have padding with 0 for the clock time
- begin applying face org-time-grid from position 2, in order to be properly
aligned with the rest of the agenda (you don't see that if you don't have a
face with background color)
[My apologies, but I'm afraid my first attempt at this patch mistook a
necessary second check for redundancy. Here is an improved version.]
* lisp/org-agenda.el (org-prepare-agenda): If the agenda is called
from within the agenda via an elisp link, such as
[[elisp:(org-agenda-list)]], org-prepare-agenda erases the buffer of
the file containing the link, since that buffer is current during
org-prepare agenda (due to a with-current-buffer in
org-agenda-open-link). An additional test now ensures that the
agenda buffer is in fact current when the buffer is erased and local
variables for the agenda are set.
* lisp/org-agenda.el (org-agenda-add-entry-text): Make sure we move
forward even if there is no text to be added.
Adding entry text with org-agenda-add-entry-text-maxlines greater than
0 could result in an infinite loop.
* org-agenda.el (org-agenda-clock-goto): Use `\C-c\C-x\C-j' for
`org-clock-goto' and `J' for `org-agenda-clock-goto'. If the heading
currently clocked in is not listed in the agenda, display this entry
in another buffer. If there is no running clock, display a help
message.
* org-clock.el (org-clock-set-current): append the filename after the
heading.
* lisp/org-agenda.el (org-agenda-menu-show-match): New option.
(org-agenda-menu-two-column): New option.
(org-agenda-get-restriction-and-command): Implement dispatch menu
without showing the matcher, and with two-column display.
This command jumps to the headline of the clocking task within the
agenda buffer. `org-agenda-clock-goto' is bound to `C-c C-x C-j'.
It is different from `org-clock-goto', which jumps to the currently
clocking entry itself (bound to `J').
* lisp/org-agenda.el (org-agenda-filter-preset): Document the limitation
for the filter preset - it can only be used for an entire agenda view,
not in an individual block in a block agenda.
* doc/org.texi (Agenda commands): Document the limitation
for the filter preset - it can only be used for an entire agenda view,
not in an individual block in a block agenda.
This patch makes some straightforward corrections to a number of
docstrings. Each change is normally to:
- correct a typo, or
- fix up hyperlinks to function or variable names, or
- ensure slightly better conformance with the documentation guidelines
and tips given in the Elisp manual
No attempt is made to provide missing docstrings or document arguments.
Cheers,
Phil
* org-agenda.el (org-search-view): Fixed inclusion of agenda-archives
in org-agenda-text-search-extra-files.
org-search-view lacked a local binding for
org-agenda-text-search-extra-files. Thus when pop was called on the
variable, the agenda-archives symbol was removed and subsequent
searches failed to include the archives.
* lisp/org-agenda.el (org-agenda-action): Document capture key and add it
to the prompt.
TINYCHANGE
A trivial patch to add some documentation for 'capture' to org-agenda (against
HEAD).
* org-agenda.el (org-agenda-bulk-action): Don't create marker for
position if target is entire file.
If the target of a bulk refile operation is the entire file,
`org-refile-get-location' returns nil for the refile position.
Creating a marker for the target file's buffer at position nil returns
a marker that points nowhere (Cf. GNU Emacs Lisp Reference Manual,
31.6). `org-refile' adds headings to level 1 if the target position
for the target file is nil -- and hence a marker that points nowhere
is not nil, tries to jump to nowhere.
* lisp/org-agenda.el (org-agenda-get-progress): Avoid reusing previous
value of EXTRA.
Sebastien Vauban writes:
> Finally reporting the following bug. Has been there for as long as I can
> remember, but never did report it when seeing it. And kept forgetting.
>
> So, now...
>
> --8<---------------cut here---------------start------------->8---
> * 2010
>
> ** 2010-06 June
>
> *** Admin
>
> **** Organization
> :LOGBOOK:
> CLOCK: [2010-06-30 Wed 13:30]--[2010-06-30 Wed 17:50] => 4:20
> - DUPLICATED TeXt.
> :END:
>
> **** Emails and News
> :LOGBOOK:
> CLOCK: [2010-06-28 Mon 09:10]--[2010-06-28 Mon 10:40] => 1:30
> CLOCK: [2010-06-30 Wed 10:30]--[2010-06-30 Wed 12:30] => 2:00
> :END:
>
> *** ABC
> :LOGBOOK:
> CLOCK: [2010-06-30 Wed 09:30]--[2010-06-30 Wed 10:30] => 1:00
> - Transfer of files to ABC.
> :END:
> --8<---------------cut here---------------end--------------->8---
>
> generates the following timeline:
>
> --8<---------------cut here---------------start------------->8---
> Timeline of file /home/sva/Projects/ecm.org
>
> 2010-06-28 Mon _________________________________
> Clocked: (1:30) Emails and News
>
> 2010-06-29 Tue _________________________________
>
> 2010-06-30 Wed _________________________________
> Clocked: (1:00) ABC - Transfer of files to ABC.
> Clocked: (2:00) Emails and News - DUPLICATED TeXt.
> Clocked: (4:20) Organization - DUPLICATED TeXt.
> --8<---------------cut here---------------end--------------->8---
>
> As you can see, the fact that I never put a descriptive text for "reading
> emails" is wrongly reported: previous text is used in the timeline, instead.
* lisp/org-agenda.el (org-agenda-get-timestamps): No errors
while getting TODO state.
(org-agenda-highlight-todo): No error when no keyword has
been matched.
Eric Arneson writes:
> I've discovered a bug in `org-agenda-get-timestamps' wherein an active
> timestamp before the first headline causes it to fail. I realize that
> this is probably an error in my use of active timestamps, but there was
> no really handy error message and this bugged me for weeks.
>
> I'm not familiar enough with org-mode to know what the correct behavior
> should be here (it'd be nice to get an error message saying "Don't use
> active timestamps that way!"), but here's an example .org file that will
> trigger the bug:
>
> --8<---------------cut here---------------start------------->8---
> #+BEGIN: clocktable :maxlevel 3 :scope today
> Clock summary at [2010-06-20 Sun 13:09]
>
> | L | Headline | Time |
> |---+---------------------------------------+--------|
> | | *Total time* | *0:13* |
> |---+---------------------------------------+--------|
> | 1 | Track down funky bug <2010-06-20 Sun> | 0:13 |
> #+END:
>
> * Track down funky bug <2010-06-20 Sun>
> :LOGBOOK:
> CLOCK: [2010-06-20 Sun 12:43]
> CLOCK: [2010-06-20 Sun 12:30]--[2010-06-20 Sun 12:43] => 0:13
> :END:
> --8<---------------cut here---------------end--------------->8---
>
> I hope this can help somebody else track down the right place to fix
> this bug.
Bernt Hansen writes:
> I was talking to Jeff Stern about tags todo matching offlist and we
> think the documentation for tags-todo matching can probably be improved.
>
> The description of C-c a M at
> http://orgmode.org/manual/Matching-tags-and-properties.html
> states
>
> C-c a M
>
> Like C-c a m, but only select headlines that are also TODO items and
> force checking subitems (see variable
> org-tags-match-list-sublevels). To exclude scheduled/deadline items,
> see the variable org-agenda-tags-todo-honor-ignore-options. Matching
> specific TODO keywords together with a tags match is also possible,
> see Tag searches.
>
> When I read this I think TODO items is any todo keyword but this isn't
> the case. It is only non-done TODO state keywords. This makes
> tags-todo matching not work for finding tasks to archive (normally
> DONE | CANCELLED keywords in my setup)
>
> Should we explicitly state that 'headlines that are also TODO items'
> does not match DONE state keywords? Or alternatively should TODO items
> and DONE items be separate (and explicitly defined) in the documentation
> -- like org-todo-keywords and org-done-keywords?
>
> I still think 'TODO keyword' matches any todo keyword defined in
> org-todo-keywords and maybe I need to be re-educated :)
Bernt is right, and this patch tries to clarify the issue.
* lisp/org-agenda.el (org-agenda-action): Make `c' key call org-capture.
* lisp/org-capture.el: New file.
* lisp/org-compat.el (org-get-x-clipboard): Function moved here from
remember.el.
* lisp/org-mks.el: New file
* lisp/org.el (org-set-regexps-and-options): Allow statistic cookies as
part of complex headlines.
(org-find-olp): New argument THIS-BUFFER. When set, assume that the
OLP does not contain a file name.
(org-agenda-get-scheduled):
* lisp/org.el (org-time-string-to-seconds):
For deadline and scheduled agenda display ignore the cyclic repeater
when calculating how many days late the task is. If you have a weekly
task and miss the date the agenda view will show more than a week late
now instead of resetting on the cyclic repeating date. This makes it
much more obvious when you missed a repeating task after the repeater.
Thanks to Bernt Hansen for this patch.
Hello, Org mode hackers,
This patch defines a variable `org-agenda-persistent-filters'.
When it is set, filters persist from one agenda view to the next.
I've found this convenient when using tags for contexts like @home,
@net, etc., some of which commonly remain applicable for a while.
Thanks,
Thomas
From 052ef9205845c78cb24d6fea8f89484bbe12a528 Mon Sep 17 00:00:00 2001
From: Thomas Morgan <tlm@ziiuu.com>
Date: Fri, 23 Apr 2010 11:48:03 +0200
Subject: [PATCH] New option `org-agenda-persistent-filters'.
When set, keep filters from one agenda view to the next.
Patch by Matt Lundin
Matt writes:
> The missing piece of the puzzle is integration with "diary" and
> "cal-tex" functions via the org-diary sexp. I have found org-diary to be
> excruciatingly slow when called for anything more than a couple of days.
> I have the following line in my diary file:
>
> &%%(org-diary :timestamp :sexp)
>
> If I try to view 20 or so upcoming days in the diary by typing C-u 20 d
> on a date in the calendar, it can take upwards of 30 seconds to generate
> the diary display. This is of little consequence, since I can, after
> all, simply use the custom agenda command. But I often want to print out
> a nice LaTeX calendar of my appointments with cal-tex-cursor-month. And
> that takes upwards of 50 seconds (see attached elp-results file).
>
> Judging from the elp-results, the culprit seems to be
> org-prepare-agenda-buffers (46 seconds), which is called 31 times (once
> for each day). It seems to me that since org-diary is being called 31
> times in quick succession by the same function (diary-sexp-entry), one
> should only need to call org-prepare-agenda-buffers once.
>
> The only solution I could see to this problem was to add a test to see
> if org-diary had been called less than 1 second ago. Thus, I added the
> variable org-diary-last-run-time and a conditional in org-diary that
> only runs org-prepare-agenda-buffers if org-diary-last-run-time is less
> than 1 second in the past.
>
> With the patch, it now takes appr. 5 seconds to generate the LaTeX
> calendar with cal-tex and org-prepare-agenda-buffers is called only
> once.
Allow C-2 C-c C-w to work in the agenda.
Update agenda after refiling
This rebuilds the agenda buffer after the refile operation completes.
It was removing the to-be-refiled task before prompting for the location
which felt a little strange. While on the prompt you can't see
the task you are refiling anymore since it was just removed from the
agenda list and if you aborted from the refile operation
with C-g then the task to be refiled has already been removed.
org-agenda.el (org-agenda-include-deadlines): Added new
customization variable to determine whether unscheduled tasks
should appear in the agenda solely because of their deadline.
Default to true, which was the previous behavior (it just wasn't
configurable).
(org-agenda-mode-map, org-agenda-view-mode-dispatch): Bind ! in
the agenda to show/hide deadline tasks.
(org-agenda-menu): Added menu option for show/hide deadlines.
(org-agenda-list): Make the agenda list sensitive to the value of
`org-agenda-include-deadlines'.
(org-agenda-toggle-deadlines): New function to toggle the value of
`org-agenda-include-deadlines' and repaint the modeline
indicators.
(org-agenda-set-mode-name): Show "Deadlines" in the agenda
modeline if deadline tasks are being displayed.
Patch by Matt Lundin
Matt writes:
> Below is a patch I've been using to speed up the construction of
> agenda views limited to certain types of entries (e.g., timestamps and
> sexps). Previously, I had constructed "calendar" views consisting
> only of timestamps and sexps by using the variable
> org-agenda-skip-function to exclude scheduled items and deadlines from
> the agenda. This, however, proved somewhat slow (3-4 seconds for
> weekly calendars, 10-12 seconds for monthly calendars). The patch
> below cuts the times to 1 and 3 seconds respectively. I believe it
> provides an efficient alternative to the skip function by allowing the
> user to tweak the arguments passed to org-agenda-get-day-entries.
Patch by Stephen Eglen, who writes:
> Just a small suggestion here. In the agenda, an entry like:
> * <2010-01-20 Wed 09:00-09:30> test
>
> gets formatted as follows:
>
> Wednesday 20 January 2010
> 8:00...... ----------------
> test: 9:00- 9:30 test
> 10:00...... ----------------
>
> the leading whitespace before '9:00' and '9:30' is needed to align the
> times, but having the space after the dash looks odd (at least to my
> latex-trained eyes). Would it be possible to patch org-agenda to put a
> leading zero rather than leading whitespace. With this patch, I see:
>
> Wednesday 20 January 2010
> 08:00...... ----------------
> test: 09:00-09:30 test
> 10:00...... ----------------
This patch introduces a new user option to select this behavior.
Stephen Eglen writes
> Within the agenda buffer, if I type 'i j' to jump to the current date I
> get:
>
> Debugger entered--Lisp error: (void-function org-datetree-find-date-create)
> org-datetree-find-date-create((1 20 2010))
> org-agenda-diary-entry-in-org-file()
> org-agenda-diary-entry()
> call-interactively(org-agenda-diary-entry nil nil)
>
> If I then do M-x load-library org-datetree
>
> and repeat 'i j', it works. Should this function be autoloaded?
Patch by Stephan Schmitt, who writes:
> An error was thrown when all tags of a headline are hidden by
> org-agenda-hide-tags-regexp (in this case the function
> get-text-property got nil as third argument)
Samuel Wales writes:
> I found three places where the lowercase version of a todo
> kw is treated specially in the latest org. For example,
>
> * todo this is lowercase
>
> First, in the agenda, they have a special face.
>
> Second, when inserting an id link, they are removed.
>
> Third, when printing the olpath, they are removed. To
> reproduce, place point at bol on 5 and press the spacebar.
> I expect todo to be in the olpath, but it is not.
>
> Thanks.
>
>
> Samuel
>
>
> * 1
> *** 2
> ***** here are some keywords i like
> ******* todo
> ********* 5
When an agenda custom command has an empty string as MATCH element, so
far this would lead to a meaningless search using an empty matcher.
Now and empty (or white) string will be interpreted just like a nil
matcher, i.e. the user will be prompted for the match.
Lukas Stelmach writes:
> Isn't it wrong when a note like this:
>
> * A very interesting meeting 11:15-12:00
> <2009-11-30 Mon>--<2009-12-01 Tue>
>
> Shows up in the agenda time gird only on monday while being untimed on
> tuesday? To make it right I do
>
> * A very interesting meeting
> <2009-11-30 Mon 11:15>--<2009-11-30 Mon 12:00>
> <2009-12-01 Tue 11:15>--<2009-12-01 Tue 12:00>
>
> or simply
>
> * A very interesting meeting 11:15-12:00
> <2009-11-30 Mon>
> <2009-12-01 Tue>
>
> Which works but doesn't show the recurrence counter.
Bernt Hansen writes:
> When org-agenda-diary-file is set to a special org file for diary
> entries and transient mark mode is enabled 'i' in the agenda fails
> with 'mark is not active now'
>
> My workaround for this is C-SPC to set the mark anywhere legal in the
> agenda display (ie not on the first or last line) and then hit 'i'
> to insert my diary entries.
Matt Lundin writes:
> The new org-agenda-diary-entry looks quite convenient.
>
> Would it be possible to add an option to bypass the date tree so as to
> add each new appointment as a simple first level heading? I prefer to
> keep my appointments organized by project and/or category and have no
> real use for the date tree. Ideally, new appointments would appear as
> first level headlines in the org-agenda-diary-file (i.e., my inbox),
> ready to be refiled.
RET will only do this if the cursor is on the link and
`org-return-follows-link' is set. `C-c C-o' will work anywhere in the
line.
Requested by Chris Leyon.
The following keys now do archiving
C-c C-x C-a archive using the command specified in
`org-archive-default-command'
This variable is by default set to `org-archive-subtree', which means
arching to the archive file.
The three specific archiving commands are available through
C-c C-x C-s archive to archive file
C-c C-x a toggle the archive tag
C-c C-x A move to archive sibling
These bindings work the same in an Org file, and in the agenda.
In addition:
- In the agenda you can also use `a' to call the default archiving
command, but you need to confirm the command with `y' so that this
cannot easily happen by accident.
- For backward compatibility, `C-c $' in an org-mode file, and `$' in
the agenda buffer continue to archive to archive file.
Richard Moreland writes:
> (setq org-agenda-custom-commands
> '(("X" agenda "" nil ("agenda.html"))))
> ;; This seems to break org-mobile-push?
> ;;(setq org-agenda-exporter-settings
> ;; '((org-agenda-add-entry-text-maxlines 5)
> ;; (htmlize-output-type 'font)))
>
> I have the lines above in my .emacs file. When I uncomment the 3
> commented lines, org-mobile-push just hangs after OVERVIEW.
>
> I don't understand exactly what is going on, but if I hit C-g or
> C-c enough I can regain control, but the sync never finishes.
Carsten Dominik
Max Mikhanosha
Bastien Guerry
Adam Spiers
David Maus
Karl Fogel
Bernt Hansen
Dave Abrahams
Sebastien Vauban
Rob Giardina
Nicolas Goaziou
Matt Lundin
Peter Münster
Tassilo Horn
Leo
niels giesen
Michael Brand
emacs
Rémi Vanicat
Michael Markert
Eric Schulte
Julien Danjou
Puneeth Chaganti
Lawrence Mitchell
Osamu Okano
John Wiegley
Łukasz Stelmach
Robert Pluim
Achim Gratz
Christopher Allan Webber
Sébastien Vauban
Manish Sharma
Jambunathan K
Julien Barnier
Philip Rooke
Dirk-Jan C. Binnema
Thomas Morgan
Andy Lutomirski