* doc/org.texi (Literal examples in ODT export):
htmlfontify.el in Emacs-24.1 now supports fontification. So
ODT source blocks will be fontified by default.
(Evaluating code blocks, Evaluating code blocks):
Whitespace-only change.
I started from the 78ec8e commit then cherry-picked and squashed
commits that have been done in master since then, except the bad
commits that overwrote the tree (in master) with the tree in maint.
This commit also bumps the version number to 7.8.06.
The only "fix" that was made between 78ec8e and the previous commit
is e0072f which has been reported to break stuff.
doc/org.texi (section on Special Properties) Clarified that ITEM refers
to the headline of the entry not the whole entry text.
(section on Matching Tags and Properties) Clarified that matching on
the value of ITEM special property is not currently supported,
and added a footnote about a partial workaround.
Also added missing -if suffix to references to org-agenda-skip-entry-if.
TINYCHANGE
This fixes a wrong merge that should not have happened:
commit 7e903a merges the master branch into the maint branch,
while we really want to keep the maint branch a bugfix-only
branch.
This commit reverts back the maint branch to its state before
merging the master branch. From there, we will fix remaining
problems with the maint branch (e.g. copyright issues) then
release this maint branch as Org-mode 7.8.05.
* lisp/org-agenda.el (org-agenda-local-vars): Clean up the variable list.
(org-agenda-get-restriction-and-command): Add a key for toggling
sticky agenda views.
* doc/org.texi (Agenda dispatcher): Document sticky agenda views
and the new key for them.
2012-01-17 Jambunathan K <kjambunathan@gmail.com>
* etc/styles/OrgOdtContentTemplate.xml
(OrgIndentedSection-Level-*): New section styles. These
sections are indented to the same level as the corresponding
list entries. These sections hold tables that occur within a
list.
(OrgTable): Increased relative width from 90% to 96% for
aesthetic reasons.
* lisp/org-odt.el (org-odt-table-indentedp): New variable
(org-odt-begin-table): Modified. If the table is within a
list, temporarily leave the list and begin an indented section
before emitting the table.
(org-odt-end-table): Modified. If the table was within a
list, close the indented section and re-open the list
immediately after ending the table.
(org-odt-continue-list, org-odt-discontinue-list): Helper
routines to temporarily discontinue and continue a list.
(org-odt-list-stack-stashed): New variable to hold the state
of a pending list.
(org-odt-begin-list, org-odt-begin-list-item)
(org-odt-end-list-item): Modified. Handle nitty-gritties for
continuing a list and list item.
(org-odt-section-count): New variable that keeps track of
section count. Used in conjunction with naming of sections.
(org-odt-begin-section, org-odt-end-section): New defuns.
(org-odt-init-outfile): Initialize
`org-odt-list-stack-stashed' and `org-odt-section-count'.
* lisp/org-lparse.el (org-lparse-list-item-count): Removed. Was a
superfluous variable.
(org-lparse-list-level): Removed. Now derived from
`org-lparse-list-stack'.
(org-lparse-list-stack): New. List that records the list
types - ordered, unordered or descriptive - in the following
order: self, parent, grand-parent etc.
(org-do-lparse): Added, removed above let-bound vars.
Disallowed regular tables within list-table block.
(org-lparse-begin-list, org-lparse-end-list)
(org-lparse-begin-list-item, org-lparse-end-list-item):
Propagate above changes.
OpenDocument doesn't permit tables to occur in the middle of a
list. Use list continuations and indented sections to typeset
indented tables.
Fixes the following bug:
http://lists.gnu.org/archive/html/emacs-orgmode/2012-01/msg00515.html
Add support for indented tables in ODT export
2012-01-20 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-format-textbox): Honor user-specified
width in captioned images.
Fix for bug reported here:
http://lists.gnu.org/archive/html/emacs-orgmode/2012-01/msg00641.html
Honor user-specified width in captioned images
2012-01-23 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-table-style-format): New. Template for
auto-generated table styles.
(org-odt-automatic-styles, org-odt-object-counters): New
variables.
(org-odt-add-automatic-style): New function.
(org-odt-write-automatic-styles): New function. Create
automatic styles for tables that have custom :rel-width.
(org-odt-begin-table): Parse attributes specified with
"#+ATTR_ODT: " option and use it to create an automatic table
style.
(org-odt-save-as-outfile): Call
`org-odt-add-write-automatic-styles'.
(org-odt-init-outfile): Init newly add variables.
(org-odt-section-count): Remove it.
(org-odt-begin-section): Use `org-odt-add-automatic-style' to
generate an automatic section name.
Customize table width using :rel-width option. For example,
to create a table of width 60% use:
#+attr_odt: :rel-width 60
| A | B |
|---+---|
| | |
org-odt.el: Put table width under user-control
2012-01-23 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-label-styles): Add a new style.
(org-odt-category-map-alist): Use it.
Andreas Leha writes:
The following snippet exports correctly to LaTeX and to html, but
produces the text "Figure Figure" in odt.
Could the behaviour be synchronized?
=== example.org ==========================
* Test ref
plot(1:10, 1:10)
Here is a reference to Figure \ref{fig:bar}
=== example.org ==========================
org-odt.el: Make label references consistent with LaTeX export
2012-01-24 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-entity-frame-styles): Add frame params
for images that are anchored as character.
(org-export-odt-format-image): Handle new anchor type
"as-char".
(org-export-odt-default-image-sizes-alist): Misc. change.
(org-export-odt-format-formula): Misc. change.
With this change, one can use the below snippet to produce
images that are laid out side-by-side.
#+ATTR_ODT: :width 7 :height 7 :anchor as-char
#+header: :file foo.png
[[./foo.png]]
#+caption: bar
#+ATTR_ODT: :width 7 :height 7 :anchor as-char
#+header: :file bar.png
[[./bar.png]]
See http://lists.gnu.org/archive/html/emacs-orgmode/2012-01/msg00677.html.
org-odt.el: Allow images to be anchored as characters
2012-01-24 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-export-odt-format-formula): Use :style
property to specify custom table styles.
Continuation of the earlier commit titled: "Put table width
under user-control".
org-odt.el: Fix regression in typesetting of MathML formulae
2012-01-27 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-format-preamble): Don't insert TOC here.
Delay it till the end of export.
(org-odt-begin-document-body): Make a note of the default
position of TOC in `org-lparse-dyn-first-heading-pos'.
(org-odt-insert-toc): Insert TOC as directed by
[TABLE-OF-CONTENTS] line or at the default position.
(org-odt-end-export): Call `org-odt-insert-toc'.
Fix for the following bug:
http://lists.gnu.org/archive/html/emacs-orgmode/2012-01/msg00974.html
org-odt.el: Honor "[TABLE-OF-CONTENTS]" directive
2012-01-27 Jambunathan K <kjambunathan@gmail.com>
org-odt.el: Fix earlier commit
2012-01-30 Jambunathan K <kjambunathan@gmail.com>
* OrgOdtStyles.xml (OrgTitlePage): New page style. Include no
footer. Use "OrgFrontMatterPage" for the following page.
(OrgFrontMatterPage): New page style. Include a footer that
displays page numbers in Roman style. Use mirrored pages.
Use "OrgFrontMatterPage" for the following page.
(OrgPage): New page style. Include a footer that displays
page numbers. Use mirrored pages. Use "OrgPage" for the
following page.
(OrgFirstPage): New page style. Include a footer that
displays page numbers. Right page only. Use "OrgPage" for
the following page.
(Standard): Modify to include a footer that displays page
numbers. Use mirrored pages. Use "Standard" for the
following page.
None of the above page styles have a header.
The newly added page styles are not used as yet.
org-odt.el: By default, include page numbers in the page footer
2012-01-31 Jambunathan K <kjambunathan@gmail.com>
org-odt.el: Do `clear-image-cache' before `create-image'
2012-02-03 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-lparse.el (org-lparse-do-convert): Replace
`call-process' with `shell-command-to-string'.
* lisp/org-odt.el (org-export-odt-convert-processes): Add a new
converter which depends solely on LibreOffice and nothing
else.
(org-export-odt-convert-process): Make the above native
converter the default.
Thanks to Giles for introducing the "--convert-to" option of
soffice.exe. The option seems to be a fairly recent
development.
http://imperfectsoftware.blogspot.in/2012/01/one-of-my-less-enjoyable-tasks-is-to.html
With this change, one can export to pdf via odt by a simple
(setq org-export-odt-preferred-output-format "pdf")
There is no need to install additional converters.
org-odt.el: Make LibreOffice the default converter
2012-02-09 Jambunathan K <kjambunathan@gmail.com>
* org-odt.el (org-export-odt-convert-capabilities): Change the
default value.
See http://lists.gnu.org/archive/html/emacs-orgmode/2012-02/msg00293.html.
Offer "docx" as an option in `org-export-odt-preferred-output-format'
2012-02-12 Jambunathan K <kjambunathan@gmail.com>
org-odt.el: Fix indentation
2012-02-12 Jambunathan K <kjambunathan@gmail.com>
org-odt.el: Tag all custom variables with Emacs version
2012-02-12 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-export-odt-convert-processes): Re-define
(org-export-odt-convert-capabilities): Fix an accidental
regression.
* lisp/org-lparse.el (org-lparse-do-convert): Related change.
Simplify definition of `org-export-odt-convert-processes'
2012-02-12 Jambunathan K <kjambunathan@gmail.com>
Retire support for BasicODConverter
2012-02-14 Jambunathan K <kjambunathan@gmail.com>
* org-odt.el (org-export-as-odt-to-buffer)
(org-replace-region-by-odt, org-export-region-as-odt): Remove
these interactive functions. They are of questionable value.
org-odt.el: Remove interactive functions of questionable value
2012-02-15 Jambunathan K <kjambunathan@gmail.com>
Improve converting from ODT to other formats
2012-02-15 Jambunathan K <kjambunathan@gmail.com>
* org-odt.el (org-export-odt-image-size-probe-method)
(org-odt-do-image-size): Use imagemagick preferentially to
determine image sizes.
See http://lists.gnu.org/archive/html/emacs-orgmode/2012-02/msg00288.html
org-odt.el: Use imagemagick to determine image sizes
2012-02-16 Jambunathan K <kjambunathan@gmail.com>
* org.texi (Top, OpenDocument Text export)
(ODT export commands, Extending ODT export)
(Images in ODT export, Tables in ODT export)
(Configuring a document converter): Add or Update.
org.texi: Update ODT section
* doc/org.texi: Decapitalize file name in references to Calc manual.
On a case sensitive file system the references from the HTML Org
manual (e. g. the link href="Calc.html#Embedded-Mode" or
href="../Calc/Embedded-Mode.html#Embedded-Mode") to the HTML Calc
manual (e. g. the file calc.html or calc/Embedded-Mode.html) do not
match.
* doc/org.texi (MobileOrg): Change the wording to reflect that the
Android Version is no longer just the little brother of the iOS version.
* doc/orgguide.texi (MobileOrg): Change the wording to reflect that the
Android Version is no longer just the little brother of the iOS version.
* org.el (org-set-regexps-and-options): Set the value of
`org-drawers' by adding the value of the infile #+DRAWERS
option to that of the existing `org-drawers'.
* org.texi (Drawers): Clearly states that #+DRAWERS will add
drawers to the one originally listed in `org-drawers'.
* org.el (org-insert-property-drawer): Not an interactive
command anymore.
(org-insert-drawer): With a prefix argument, insert a property
drawer. Check for headline within the region before inserting
the drawer. Don't include special drawers in the completion
table.
(org-mode-map): New keybinding `C-c C-x d' for
`org-insert-drawer'.
* org.texi (Drawers): How to insert/complete drawers.
Thanks to Nicolas Goaziou for the discussion and the patch.
* doc/org.texi (noweb-sep): Document new header argument.
* lisp/ob.el (org-babel-common-header-args-w-values): Add new header
argument.
(org-babel-expand-noweb-references): Use header argument rather than
customization variable.
* lisp/ob.el (org-babel-noweb-separator): Custom variable for
accumulated noweb references.
(org-babel-expand-noweb-references): Allow separator for noweb
references.
* doc/org.texi (noweb-ref): Documentation of this new custom variable.
Using lowercase for environment keywords is not as readable
as using uppercase. Using lowercase just for #+results looks
weird -- instead, we use uppercase for *all* environment and
option keywords, explicitely explaining that the user can use
either lowercase or uppercase in their file.
Also explain this convention.
Two exceptions: #+results, as it is dynamically inserted and
has always been lowercase, and #+BEGIN_LaTeX, with mixed case
to respect Lamport's will. But all these keywords can be
written with lower/upper/mixed case.
Thanks to François Pinard for raising this issue.
* org-agenda.el (org-agenda-filter-preset): New alias.
(org-agenda-filter-by-category): New command.
(org-agenda-mode-map): Add the new command.
(org-agenda-custom-commands-local-options): Add category
filter preset.
(org-agenda-mark-filtered-text): Mark both tag and filter
overlays.
(org-agenda-category-filter-preset): New variable.
(org-finalize-agenda, org-agenda-redo)
(org-agenda-filter-make-matcher, org-agenda-filter-apply):
Handle both category and tag filters.
(org-agenda-filter-show-all-tag): Rename from
`org-agenda-filter-by-tag-show-all'.
(org-agenda-filter-show-all-cat): New function.
(org-agenda-set-mode-name): Show the category filter in the
modeline.
* org-faces.el (org-agenda-filter-category): New face.
* org.texi (Agenda commands): Update documentation about the
new category filtering feature.
This feature has been requested by several people -- thanks
to all of them for mentioning this possibility.
* org-exp.el (org-export-date-timestamp-format): New option to
define the way a timestamp in #+DATE will be exported.
(org-infile-export-plist): Use the new option.
Thanks to Torsten Wagner for this idea.
* org.texi (Plain lists): Split the table to fix the display
of items.
Thanks to Elias Assarsson for spotting this, and to Takaaki
ISHIKAWA for providing a preliminary patch.
* doc/org.texi: Use 'Org mode' instead of alternatives like
'Org-mode' or 'org-mode', as suggested in Phil's notes
('doc/Documentation_Standards.org').
Org manual: Fix double-spaces at the end of sentences
* doc/org.texi: End sentences with two spaces.
>From 19e39b67f4a8dbee3f1015f636fac4f77e59d3c2 Mon Sep 17 00:00:00 2001
From: Julian Gehring <julian.gehring@googlemail.com>
Date: Mon, 12 Dec 2011 19:19:20 +0100
Subject: [PATCH] Org manual: Fix double-spaces at the end of sentences
* doc/org.texi: End sentences with two spaces.
Hi Bastien and others,
Lately I have been seeing a lot of bug reports sent using the
org-submit-bug-report. The reporter usually reports the bug from a
session they have been using with their full blown customisations. And
often they are requested to reproduce the bug with emacs -Q. So I
thought it would be easier if the manual mentioned this little detail.
A patch is attached.
Hope this helps.
PS: I marked the patch as TINY CHANGE.
* doc/org.texi (External links): Document the link types file+sys and
file+emacs, slightly narrow used page width.
* lisp/org.el (org-offer-links-in-entry): Make list when assigning a
single link.
"M-1 C-c C-o" or (org-open-at-point 1) or (org-offer-links-in-entry 1)
on a headline followed by two links enters Lisp error. Both changes
are remainders of the commit release_6.33f-189-g3e0c61d.
* doc/org.texi (eval): Documenting the full range of :eval header
argument values.
* lisp/ob.el (org-babel-confirm-evaluate): Adding support for new
range of :eval header arguments.
* testing/lisp/test-ob.el (test-ob/eval-header-argument): Testing the
:eval header argument.
* doc/org.texi (eval): Documentation of the new :eval option.
* lisp/ob.el (org-babel-confirm-evaluate): Inhibit evaluation during
export when eval is set to "non-export".
* lisp/org-clock.el (org-clock-in):
(org-clock-find-position): Make space after date optional.
* lisp/org.el (org-set-regexps-and-options):
(org-ts-regexp):
(org-ts-regexp-both):
(org-ts-regexp1):
(org-ctrl-c-ctrl-c): Make `C-c C-c' on date fix the time stamp
* doc/org.texi (Creating timestamps): Document the effect of `C-c C-c'
on a timestamp.
* doc/org.texi (Literal examples): A new link to the template for
inserting empty code blocks.
(Structure of code blocks): A new link to the template for inserting
empty code blocks.
Hyperlinks in the form "info:file#node" work with plain spaces in the
"node" part and do not need to have spaces encoded as %20. This is
the case for me, who is using the Debian emacs-snapshot package,
version 20110926-1.
TINYCHANGE
* org.texi (External links): Add footnote on how the behavior of the
text search in Org files are controled by the variable
org-link-search-must-match-exact-headline.
This change is necessary in order to avoid misleading the user as
regards of the behavior of the search, in particular because the
default value of org-link-search-must-match-exact-headline is
'query-to-create.
TINYCHANGE
* lisp/org-agenda.el (org-agenda-move-date-from-past-immediately-to-today):
New option.
(org-agenda-date-later): Improve the logical structure.
* doc/org.texi (Agenda commands): Document that S-right on a line
representing a past date will immediately shift that date to today.
* lisp/ob.el (org-babel-params-from-buffer): Removing #+BABEL: lines
in favor of general #+PROPERTIES: lines.
* doc/org.texi (Buffer-wide header arguments): Removing documentation
of the defunct #+BABEL: structure.
* org.texi (Exporting Agenda Views): Fix command line syntax.
You cannot use 'emacs -f org-batch-store-agenda-view' because it is
implemented as macro, not function.
* lisp/ob-keys.el (org-babel-key-bindings): Bound to C-c C-v k.
* lisp/ob.el (org-babel-map-regexp): New generic mapping macro.
(org-babel-map-inline-src-blocks): Rewritten to use new macro.
(org-babel-kill-results): Remove some or all results in the current
file.
* lisp/ob-lob.el (org-babel-map-call-lines): Map over all lob call
lines in the current file.
* doc/orgcard.tex: Document new keybinding.
This allows to display the output of duration computations
as a fraction of days, hours, minutes or seconds.
Thanks to Daniel E. Doherty for bringing up this need.
* org-table.el (org-table-duration-custom-format): New
defcustom to select output format of durations computations.
(org-table-time-seconds-to-string): Use the new variable.
(org-table-eval-formula): Allow `t' as a flag, on top of `T'.
`t' will use the custom output format defined in
`org-table-duration-custom-format.
* org-capture.el (org-capture-templates): docstring fix.
* org.texi (Template expansion): order template sequences in
the proper order.
Thanks to Philipp Möller for this fix.
* lisp/ob.el (org-babel-view-src-block-info): New function to inspect code blocks.
* lisp/ob-keys.el (org-babel-key-bindings): Key bindings for org-babel-view-src-block-info.
* doc/orgcard.tex: Documentation of new Babel function.
* org-table.el (org-table-eval-formula): Fix bug when a
formula "range" is just one cell.
(org-table-time-string-to-seconds): don't check whether
we manipulate a string.
(org-deadline, org-schedule): Improve docstrings.
(org-add-planning-info): Allow relative time like "-2d" or
"++2w" for the TIME argument.
The user can now call `org-schedule' and `org-deadline'
and use "+1d" to say that the task must be scheduled one
day later than today, or "++1d" to say that the task must
be scheduled one day later than the current SCHEDULED date,
if any.
This also works in agenda: you can select several entries
and reschedule them to +2d.
Thanks to Memnon Anon for insisting an finding a solution
for this!
* Makefile: remove target install-info-debian and modify target
install-info so that it is compatible with the older dpkg version
of install-info that resides in /usr/sbin and may be picked up
when root is installing info files
Initial reporting by Jude DaShiell, suggestions for changing Makefile
by Nick Dokos. The solution implemented re-arranges the arguments to
install-info to be compatible with both the dpkg and GNU version of
the program. On Debian, /usr/bin/install-info is actually a wrapper
that calls /usr/bin/ginstall-info and issues the following warning
when called as root:
This is not dpkg install-info anymore, but GNU install-info
See the man page for ginstall-info for command line arguments
This warning can be safely ignored since we actually prefer that GNU
install-info is called even though we've arranged the arguments to
be compatible with dpkg install-info.
Tested on openSuSE Tumbleweed, Win7/Pro (both MSys and Cygwin) and by
Jude DaShiell on Debian Squeeze and Slackware.
TINYCHANGE
The org-export-* prefix is confusing here, as these functions
seem to be part of org-exp.el. Let's name them by the library
they are in (and rely on) for now -- maybe this will change
when we move the ODT exporter to the core.
* Mention use of keywords like multicolumn and float
* Remove previous mention of hack with placement option
as per comments on the mailing list. The hack is
better suited for Worg.
Complete org-crypt config example with a hackish workaround
to disabling auto-save locally in a buffer:
# -*- buffer-auto-save-file-name: nil; -*-
Thanks to Bill Day for suggesting this.