When exporting to html the source-code block name will be included
as a <label> immediately preceding the exported code. This <label>
is decorated with the 'org-src-name' css class.
When exporting to LaTeX with the listings package the source-code
block name will be included as a listings \title for the code
block. Currently the name will not be exported when the listings
package is not in use.
Charles Sebold writes:
> This is with a clean Emacs, nothing in .emacs except for what is
> necessary to add my org-mode lisp directory to the load path and
> (require 'org-install), Emacs pulled down from bzr this morning, and
> current git download of org-mode, pulled a few minutes ago.
>
> With an org file like this:
>
> ------------------------------------------------------------------------
> * TODO Try out [[elisp:(org-version)][link problem]] if possible
> ------------------------------------------------------------------------
>
> Pull this into an agenda view, then put cursor over the link and try to
> follow it. The result is as follows:
Christopher Suckling writes:
> Thank you, but not quite working yet:
>
> ,----
> | #+BIND: org-export-latex-title-command ""
> `----
>
> now appears to be having the *effect* of setting a global variable.
>
> I load Emacs then visit the below test org file. I then export the file.
>
> I get a \maketitle line.
>
> I then C-c C-c on the #+BIND: line and re-export.
>
> \maketitle is removed.
>
> I then export another org file without the #+BIND: line.
>
> There is no \maketitle, even though there should be.
>
> I add
>
> ,----
> | #+BIND: org-export-latex-title-command "\foobar"
> `----
>
> to the new org file, C-c C-c and export:
>
> \foobar is added to the exported file.
>
> Finally, I re-export the original test org file (without C-c C-c on the
> #+BIND: line):
>
> \foobar is added to the exported file.
>
> However,
>
> ,----
> | C-h v org-export-latex-title-command
> `----
>
> always returns the value "\\maketitle", no matter what the value of the
> #+BIND: line.
>
> Best, Christopher
Oscar Fuentes writes:
> When a [/] is used on a header that does not contain subitems, pressing
> C-c C-c on it signals an error on the minibuffer:
>
> org-update-statistics-cookies: No data for statistics cookie
>
> and the cookie appears with the same face (text color) as if it were
> incomplete.
>
> IMHO, [/] on a header without subitems should show [0/0] with the same
> face used for the case where all subitems are done.
_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.orghttp://lists.gnu.org/mailman/listinfo/emacs-orgmode
file+sys:/path/to/file will use the system to open the file, like
double-clicking would
file+emacs:/path/to/file will force opening by Emacs
Also, when using C-c C-o on a headline of get a list of links in the
entry, pressing RET will open *all* links. This allows something like
projects to be defined, with a number of files that have to be opened
by different applications.
These were requests by John Wiegley.
Adam Spiers writes:
> I really like the way `M-x org-agenda C' takes you straight to the
> *Customize Option: Org Agenda Custom Commands* buffer. Similarly, it
> would be nice if `M-x org-remember C' took you straight to the
> *Customize Option: Org Remember Templates* buffer.
This does now work, but only if the user has no template defined for
the access letter `C'.
>
> Although in both cases it would be even nicer if the keystroke for
> this was customisable, as no doubt some people already have `M-x
> org-remember C' set up to do something else.
It is not customizable, like for the agenda....
PT writes:
> [Orgmode] org-read-date-prefer-future 'time doesn't always prefer future
>
> This is a very useful setting, because it allows the user to
> quickly schedule a task into the future by simply entering the
> time, but it doesn't always do the right thing.
>
> Suppose I scheduled a task to 1pm, but I didn't have time to deal
> with it during the day. It's 5pm now. If I want to reschedule the task to
> tomorrow 10am then I can write simply 10am to the time prompt and
> it puts the task correctly to tomorrow 10am. However, if I want
> to reschedule it to tomorrow 2pm then I can't write simply 2pm,
> because then it schedules the task at 2pm today (which is past
> already, since it's 5 pm).
>
> The problem is the feature uses the task's own scheduled time to
> determine if a time is in the past, instead of the current time.
>
>
> It's Org-mode version 6.33
Skip clocking out when we are clocking in the same task that
is currently clocking but go through the normal clock-in
setup so a modified task name or effort property is
updated in the modeline.
Avoid closing the currently clocking entry when clocking in the same task
again. Leave the clock entry open until some other task is clocked in.
This allows us to clock in tasks with hooks that are called frequently without
generating lots of short sequential clock entries for the same task.
Matt Lundin writes
> I believe that commit b8e0d6fdb4 broke
> accessing timestamps with the org-entry-get.
>
> With that commit, several functions I use to check whether an entry has
> a timestamp stopped working.
>
> In other words,
>
> (org-entry-get nil "TIMESTAMP_IA")
>
> or
>
> (org-entry-get nil "TIMESTAMP")
>
> always return nil, even if a timestamp exists.
>
> Strangely, the org-entry-properties alist includes values for TIMESTAMP
> and TIMESTAMP_IA.
>
> I tested this by evaluating the expressions in the sample entry below:
>
> --8<---------------cut here---------------start------------->8---
> * TODO Test 💻
> <2009-12-19 Sat>
> [2009-12-19 Sat 17:47]
>
> (org-entry-get nil "TIMESTAMP_IA")
> (org-entry-get nil "TIMESTAMP")
> (org-entry-properties)
> --8<---------------cut here---------------end--------------->8---
The regular expression was not optimal, and if there was a horizontal
rule, search would not start from the beginning of the buffer but from
after the rule!
Samuel Wales writes:
> I found three places where the lowercase version of a todo
> kw is treated specially in the latest org. For example,
>
> * todo this is lowercase
>
> First, in the agenda, they have a special face.
>
> Second, when inserting an id link, they are removed.
>
> Third, when printing the olpath, they are removed. To
> reproduce, place point at bol on 5 and press the spacebar.
> I expect todo to be in the olpath, but it is not.
>
> Thanks.
>
>
> Samuel
>
>
> * 1
> *** 2
> ***** here are some keywords i like
> ******* todo
> ********* 5
When an agenda custom command has an empty string as MATCH element, so
far this would lead to a meaningless search using an empty matcher.
Now and empty (or white) string will be interpreted just like a nil
matcher, i.e. the user will be prompted for the match.
David Maus writes:
> Just realized that there a lot of broken links in the published
> version of Worg. Seems like something went totally wrong with the
> export to html. For instance:
>
> http://orgmode.org/worg/
>
> "The main resources"
>
> The link to the official page reads http:/g and leads to
> http://orgmode.org/worg/g
>
> -or-
>
> http://orgmode.org/worg/org-contrib/org-protocol.php
>
> "Firefox"
>
> As of March 2009 Firefox users follow the steps documented on
> http:l. Here is a summary: ...
>
> the link reads "http:l" and leads to
> http://orgmode.org/worg/org-contrib/l
>
> And so on.
>
David Maus writes:
> When `org-previous-item' is called on an item with nothing above it
> Orgmode enters an infinite loop. The reason is that
> `org-previous-item' searches for non-empty lines by moving point up
> line by line and if there is nothing above an item point gets stuck on
> begin of buffer.
>
> example.org
> ,----
> |
> | - Item
> `----
>
> Move point on Item, M-x org-previous-item RET and Orgmode enters the
> infinite loop.
>
> Attached patch adds a conditional clause to `org-previous-item' that
> leaves the search loop if point reaches beginning of buffer.
Daniel S. Sinder writes:
> Here's an "odd" problem when I call org-archive-subtree with a
> prefix argument. It seems that DONE subtrees are not found if
> I'm using odd level headlines. I've tried this minimal test
> case:
>
> ---- begin: test case 1 ----
> #+STARTUP: hidestars odd
>
> * DONE Project 1
> *** DONE Task 1.1
> *** DONE Task 1.2
> ---- end: test case 1 ----
>
> If I put the cursor on the level-1 headline and do C-u C-c C-x
> C-s, I am not prompted if I want to archive the level-3 children.
> However, if I remove 'odd' from the STARTUP line and move the
> level 3 headlines to level 2, so I have this:
>
> ---- begin: test case 1 ----
> #+STARTUP: hidestars
>
> * DONE Project 1
> ** DONE Task 1.1
> ** DONE Task 1.2
> ---- end: test case 1 ----
>
> then a repeat of the same command (C-u C-c C-x C-s) correctly
> asks if I want to archive the two level-2 headlines.
>
> I've removed my personal customizations and the problem does not
> go away.
Paul Griepentrog writes:
> Every once in a while I use org-mode in a buffer that is not
> associated with a file... and then org-goto gets confused. To repeat:
>
> BUFFER-NO-FILE
> ---------------
> * One
> - a
> * Two
> - b
> ---------------
>
> M-x org-mode
> C-c C-j
> org-get-refile-targets: Wrong type argument: stringp, nil
>
> [...]
>
> This patch fixes it:
Julien Barnier writes:
> I recntly noticed that in some specific cases, the final '}' was
> esacped when exproting an emphasis element to LaTeX.
>
> For example, the following element :
>
> /aa/
>
> Is exported to :
>
> \emph{aa\}
>
> This does not append if the string begins with a space or if it
> is ASCII-only. For example, the followig strings are exported
> correctly :
>
> /aaa/
> //
>
> I don't understand why the problem only occurs with non-ASCII chars,
> but I think that the regexp to protect added special chars in the
> org-export-latex-fontify function is missing a '?' in the
> beginning. Tha attached patch corrects it.
Bernt Hansen writes:
> ,----[ test.org ]
> |
> | * Main task
> | ** DONE Task 1
> | ** DONE Task 2
> | ** TODO Task 4
> | ** TODO Task 3
> | ** TODO Task 5
> | * Next task
> `----
>
> Put the point on * Main Task
> C-x n s to narrow to subtree
> C-c C-v to show active TODOs
> Put point on TODO Task 4
> M-down arrow
> M-up arrow
>
> generates
>
> Debugger entered--Lisp error: (error "before first heading")
Nicolas Girard writes:
> My point was, in the following two examples, the empty lines right
> before "C" should be preserved in the LaTeX output.
>
> Cheers,
> Nicolas
>
> #===
> - A2
> - B2
>
> C
> #===
>
>
> #===
> - A3
> - B3
>
>
> C
> #===
Add a variable org-complete-tags-always-offer-all-agenda-tags, which makes org
complete all tags from all agenda files if non-nil. Usually, setting it
locally to t in org-remember buffers is most convenient.
Avoid closing the currently clocking entry when clocking in the same task
again. Leave the clock entry open until some other task is clocked in.
This allows us to clock in tasks with hooks that are called frequently without
generating lots of short sequential clock entries for the same task.
Patch by Bernt Hansen.
Modified by Carsten
Scot Beker writes:
> I cite my references in org like
> this.\autocite[231]{bibtexkey_2009}, where '231' is the
> relevant page number. When exporting to LaTeX, Org thinks
> that the value in square brackets is a footnote number and
> produces a document with a "footnote definition not found:
> 231" error message at the bottom of the document. My
> settings are below, and I've searched pretty hard through
> them to look for anything that might have caused it. Any
> ideas?
Lukas Stelmach writes:
> Isn't it wrong when a note like this:
>
> * A very interesting meeting 11:15-12:00
> <2009-11-30 Mon>--<2009-12-01 Tue>
>
> Shows up in the agenda time gird only on monday while being untimed on
> tuesday? To make it right I do
>
> * A very interesting meeting
> <2009-11-30 Mon 11:15>--<2009-11-30 Mon 12:00>
> <2009-12-01 Tue 11:15>--<2009-12-01 Tue 12:00>
>
> or simply
>
> * A very interesting meeting 11:15-12:00
> <2009-11-30 Mon>
> <2009-12-01 Tue>
>
> Which works but doesn't show the recurrence counter.
Ian Barton writes:
> I am not sure if this is intended behaviour or not.
> If I start a new document with no headings and type:
>
> - item 1
>
> then press M_Ret, I get:
>
> - item 1
> *
>
> If my document is like:
>
> * Heading
> - item 1
>
> M-Ret works as expected.
If there was a title set for a column, org-agenda-colview-summarize would look
for the title instead of the property, resulting in empty summaries. This is now
fixed.
All the colors used now relate on the color wheel. The blues have been
shifted to 15% less saturation than greens, and reds are shifted to 10%
greater saturation. The colors are very close to what was there before,
but now they harmonize much more closely.
Francesco Pizzolante writes:
> Exporting multiple references to the same footnote to LaTeX lead to a wrong
> generated code.
>
> The following example:
>
> --8<---------------cut here---------------start------------->8---
> * Title
> This is my text[fn:1:This is my footnote.]. And another one[fn:1].
> --8<---------------cut here---------------end--------------->8---
>
> Will produce the following LaTeX code:
>
> --8<---------------cut here---------------start------------->8---
> \section{Title}
> \label{sec-1}
>
> This is my text\footnote{This is my footnote. }. And another one\$$^{1}$\$.
> --8<---------------cut here---------------end--------------->8---
>
> The correct code should be:
>
> --8<---------------cut here---------------start------------->8---
> \section{Title}
> \label{sec-1}
>
> This is my text\footnote{This is my footnote. }. And another one$^{1}$.
> --8<---------------cut here---------------end--------------->8---
Bernt Hansen writes:
> When org-agenda-diary-file is set to a special org file for diary
> entries and transient mark mode is enabled 'i' in the agenda fails
> with 'mark is not active now'
>
> My workaround for this is C-SPC to set the mark anywhere legal in the
> agenda display (ie not on the first or last line) and then hit 'i'
> to insert my diary entries.
Matt Lundin writes:
> The new org-agenda-diary-entry looks quite convenient.
>
> Would it be possible to add an option to bypass the date tree so as to
> add each new appointment as a simple first level heading? I prefer to
> keep my appointments organized by project and/or category and have no
> real use for the date tree. Ideally, new appointments would appear as
> first level headlines in the org-agenda-diary-file (i.e., my inbox),
> ready to be refiled.
Bernt Hansen writes:
> The org-agenda multi-occur search command (C-c a /) does not return
> results on buffers that are currently narrowed if the search would
> normally match outside the narrowed region. This prevents possible
> matches from being displayed.
Sebastian Rose writes:
> * This is how it works:
>
> Each project in `org-protocol-project-alist' may now have a new
> element `:rewrites'. `:rewrites' is a list of cons cells, that maps
> regular expressions to relative paths.
>
>
>
> * Example:
>
> (setq org-protocol-project-alist
> '(("http://fairposter.de/"
> :base-url "http://example-web-shop.de/"
> :working-directory "/path/to/working/directory/"
> :online-suffix ".php"
> :working-suffix ".php"
> :rewrites (("example-web-shop.de/cars/" . "products.php")
> ("example-web-shop.de/$" . "index.php")
> ))
>
> ;; .... more projects here
> ))
>
>
> Today, if I visit http://www.example-web-shop.de/, the URL would
> not match a path to any of the files below my working directory.
>
> Tomorrow, /path/to/working/directory/index.php is opened, because there's
> a matching rewrite.
>
>
> Today, a rewritten URL like
> http://example-web-shop.de/cars/lamborghini/Gallardo_LP560-4_MY09
> would not match a path to any of the files below my working
> directory, because URLS like `..../cars/' would be rewritten on the
> server and served through http://example-web-shop.de/products.php.
>
> Tomorrow, that URL will be mapped to
> /path/to/working/directory/products.php, because there's a matching
> rewrite defined.
David Maus writes:
> By accident I noticed that if you clone a subtree using C-c C-x c who
> or whose content is the last line of the file orgmode inserts the
> clone without the desired newline.
>
> example.org
> ,----
> | * Just a test
> `----
>
> If you move the point behind test and press C-c C-x c 1 <RET> <RET>
> the clone is inserted right behind "test".
>
> example.org
> ,----
> | * Just a test*Just a test
> `----
>
> Instead orgmode should insert a newline before inserting the clone
> when the file misses an empty line at the end.
Samuel Wales writes:
> I find that changing a task from a todoish state to blank
> causes blocking to occur. I normally want all todo state
> changes except those to doneish states to be non-blocked.
>
> I think the issue might be that blank is special-cased, as
> if it were a doneish state. I would prefer blank to be a
> todoish state just like any other.
Make org-agenda-columns-summarize work properly with the new summary types.
It was assuming the values should be summarised by adding them together. It's
now updated to use the summary functions in org-columns-compile-map, and also
handles summary types with calculated values properly.
Leave calculated columns blank if there is no underlying value.
Don't return zero if a property is missing.
Changes are also applied to xemacs colview.
Exporting drawers was not really supported, now it is.
Drawers that are selected for export are formatted using the function
specified in the variable `org-export-format-drawer-function'. If
that is nil, the default `org-export-format-drawer' will publish the
drawer as a colon example, i.e. verbatim and in fixed-width.
Sebastian Rose writes
> 1. Open an *.org file you can export to PDF. Ensure the file is not
> located where your Org-mode sources are (org-*.el files). Choose a
> file, that includes some images or a SETUPFILE using relative
> paths.
> 2. M-x default-directory RET
> to see the value of that variable in the current buffer.
> 3. C-c C-e p
> to export to PDF and verify it works.
> 4. C-c C-x !
> to `org-reload'
> 5. Now repeat steps 2 and 3. Note, that the export fails.
Sebastian also submitted the basic patch to fix this
Sebastian Rose writes:
> The following code does not work as expected, when exported to PDF:
>
> => --->8----------------------------->8----------------------------->8---
> * Image basics
>
> Images are inserted into an Org file in a fashion similar to links:
> : [[file:///home/sebastian/develop/org/org-mode-unicorn.png]]
>
> <= ---8<-----------------------------8<-----------------------------8<---
>
> Result:
>
> The last line is exported as:
>
> \href{file:///home/sebastian/develop/org/org-mode-unicorn.png}{nil}
>
>
> Expected result:
>
> I expect the last line to be exported as fixed width text.
>
Saving the edit buffer is achieved by calling org-edit-src-exit,
saving the org buffer and returning to the edit buffer with
org-edit-src-code. When those two functions are used in this context,
they should not attempt to restore the saved window configuration, nor
alter the saved window configuration.
Eric Fraga sent this test file:
> * Problem with underscore (subscript) in emphasised text.
> 1. Design for CO_2 capture.
> 2. The paper /Design for CO_2 capture/ is very interesting.
> 3. This item is combined with the previous and the previous is
> actually formatted wrongly.
> 4. This item seems to come out just fine.
Rick Moynihan writes:
> I'm wondering if anyone logs rescheduled tasks with org-mode... As I
> find myself sometimes scheduling tasks for a future date, but then on
> the day not having the capacity to do them. In these situations I
> just reschedule them, but it'd be nice to record the dates for which
> an item was originally scheduled in the LOGBOOK.
>
> Has anyone configured org-mode to do this? lognotedone only appears to
> log state changes (rather than schedule/deadline changes).
Martin G. Skjaeveland writes:
> Then I write
>
> some text some text ~<<some_scr_block_name>>~.
>
> because I want "<<some_scr_block_name>>" written as verbatim in my latex
> export, I get, in latex,
>
> \texttt{\textbackslash{}label\{some\_src\_block\_name\}some\_src\_block\_name}.
>
> which gives me the text
>
> \label{some_src_block_name}some_src_block_name
>
> in verbatim.
Carsten Dominik
Eric Schulte
Bernt Hansen
John Wiegley
Tassilo Horn
Jan Böcker
James TD Smith
Dan Davison