Francesco Pizzolante writes:
> Exporting multiple references to the same footnote to LaTeX lead to a wrong
> generated code.
>
> The following example:
>
> --8<---------------cut here---------------start------------->8---
> * Title
> This is my text[fn:1:This is my footnote.]. And another one[fn:1].
> --8<---------------cut here---------------end--------------->8---
>
> Will produce the following LaTeX code:
>
> --8<---------------cut here---------------start------------->8---
> \section{Title}
> \label{sec-1}
>
> This is my text\footnote{This is my footnote. }. And another one\$$^{1}$\$.
> --8<---------------cut here---------------end--------------->8---
>
> The correct code should be:
>
> --8<---------------cut here---------------start------------->8---
> \section{Title}
> \label{sec-1}
>
> This is my text\footnote{This is my footnote. }. And another one$^{1}$.
> --8<---------------cut here---------------end--------------->8---
Bernt Hansen writes:
> When org-agenda-diary-file is set to a special org file for diary
> entries and transient mark mode is enabled 'i' in the agenda fails
> with 'mark is not active now'
>
> My workaround for this is C-SPC to set the mark anywhere legal in the
> agenda display (ie not on the first or last line) and then hit 'i'
> to insert my diary entries.
Matt Lundin writes:
> The new org-agenda-diary-entry looks quite convenient.
>
> Would it be possible to add an option to bypass the date tree so as to
> add each new appointment as a simple first level heading? I prefer to
> keep my appointments organized by project and/or category and have no
> real use for the date tree. Ideally, new appointments would appear as
> first level headlines in the org-agenda-diary-file (i.e., my inbox),
> ready to be refiled.
Bernt Hansen writes:
> The org-agenda multi-occur search command (C-c a /) does not return
> results on buffers that are currently narrowed if the search would
> normally match outside the narrowed region. This prevents possible
> matches from being displayed.
David Maus writes:
> By accident I noticed that if you clone a subtree using C-c C-x c who
> or whose content is the last line of the file orgmode inserts the
> clone without the desired newline.
>
> example.org
> ,----
> | * Just a test
> `----
>
> If you move the point behind test and press C-c C-x c 1 <RET> <RET>
> the clone is inserted right behind "test".
>
> example.org
> ,----
> | * Just a test*Just a test
> `----
>
> Instead orgmode should insert a newline before inserting the clone
> when the file misses an empty line at the end.
Samuel Wales writes:
> I find that changing a task from a todoish state to blank
> causes blocking to occur. I normally want all todo state
> changes except those to doneish states to be non-blocked.
>
> I think the issue might be that blank is special-cased, as
> if it were a doneish state. I would prefer blank to be a
> todoish state just like any other.
Make org-agenda-columns-summarize work properly with the new summary types.
It was assuming the values should be summarised by adding them together. It's
now updated to use the summary functions in org-columns-compile-map, and also
handles summary types with calculated values properly.
Leave calculated columns blank if there is no underlying value.
Don't return zero if a property is missing.
Changes are also applied to xemacs colview.
Exporting drawers was not really supported, now it is.
Drawers that are selected for export are formatted using the function
specified in the variable `org-export-format-drawer-function'. If
that is nil, the default `org-export-format-drawer' will publish the
drawer as a colon example, i.e. verbatim and in fixed-width.
Sebastian Rose writes:
> The following code does not work as expected, when exported to PDF:
>
> => --->8----------------------------->8----------------------------->8---
> * Image basics
>
> Images are inserted into an Org file in a fashion similar to links:
> : [[file:///home/sebastian/develop/org/org-mode-unicorn.png]]
>
> <= ---8<-----------------------------8<-----------------------------8<---
>
> Result:
>
> The last line is exported as:
>
> \href{file:///home/sebastian/develop/org/org-mode-unicorn.png}{nil}
>
>
> Expected result:
>
> I expect the last line to be exported as fixed width text.
>
Saving the edit buffer is achieved by calling org-edit-src-exit,
saving the org buffer and returning to the edit buffer with
org-edit-src-code. When those two functions are used in this context,
they should not attempt to restore the saved window configuration, nor
alter the saved window configuration.
Rick Moynihan writes:
> I'm wondering if anyone logs rescheduled tasks with org-mode... As I
> find myself sometimes scheduling tasks for a future date, but then on
> the day not having the capacity to do them. In these situations I
> just reschedule them, but it'd be nice to record the dates for which
> an item was originally scheduled in the LOGBOOK.
>
> Has anyone configured org-mode to do this? lognotedone only appears to
> log state changes (rather than schedule/deadline changes).
Martin G. Skjaeveland writes:
> Then I write
>
> some text some text ~<<some_scr_block_name>>~.
>
> because I want "<<some_scr_block_name>>" written as verbatim in my latex
> export, I get, in latex,
>
> \texttt{\textbackslash{}label\{some\_src\_block\_name\}some\_src\_block\_name}.
>
> which gives me the text
>
> \label{some_src_block_name}some_src_block_name
>
> in verbatim.
This lets you see how long has passed since the specified timestamp property
each entry. The three operators (@min, @max, @mean) show either the age of the
youngest or oldest entry or the average age of the children.
Alessandro Paccacio writes:
> I've an outline like this:
>
> * Project A
> ** TODO Task A-1 [0/3]
> *** TODO Subtask A-1-a
> *** TODO Subtask A-1-b
> *** TODO Subtask A-1-c
>
> where level 1 heading is the name of a project, level 2 heading is a
> generic task broken into three level 3 headings. As suggested in
> section 5.5 of the manual, I've hooked the org-summary-todo function
> to org-after-todo-statistics-hook, in order to automatically change
> the level 2 TODO to DONE when all the subtasks are DONE.
> Unfortunately, when I change to DONE the first subtask, an unexpected
> TODO is added to level 1 heading:
>
> * TODO Project A
> ** TODO Task A-1 [1/3]
> *** DONE Subtask A-1-a
> *** TODO Subtask A-1-b
> *** TODO Subtask A-1-c
>
> From now on, the switch TODO->DONE or DONE/TODO applies to level 1
> heading, even if the [/] cookie in level 2 is correctly updated:
>
> * DONE Project A
> ** TODO Task A-1 [3/3]
> *** DONE Subtask A-1-a
> *** DONE Subtask A-1-b
> *** DONE Subtask A-1-c
>
> Is there a way to apply the automatic change of TODO to the parent
> heading only, as below?
>
> * Project A
> ** DONE Task A-1 [3/3]
> *** DONE Subtask A-1-a
> *** DONE Subtask A-1-b
> *** DONE Subtask A-1-c
This bug resulted from a recent patch which made a prefix arg of 2 to
mean refile to the clock. However, I forgot to actually test the
value of the prefix arg...
Chris Randle writes:
> I've just noticed that creating a sparse tree with `C-c / r' is
> not displaying matches in my org file. It hasn't always been this
> way, I *think* things were working OK around 6.29, but it's hard
> to be sure.
>
> I've managed to pare my org file down to a few lines that
> demonstrate the problem
>
> ===============================
>
> * Customers
> ** Customer A
> *** Billing
> **** Support during September :ARCHIVE:
> ** Customer B
> 07964-xxxxxx
>
> *** Problem with Laptop
> ** Customer C
> *** Current Details
>
> *** Test of 07968 showing up
> ** Customer D
> 01673-xxxxxx
> 07968-xxxxxx
>
> *** Laptop slowdown fix
> spoolsv.exe at 99%
>
> ===================================
>
> Setting a sparse tree by regexp 0796[48] returns "3 match(es) for
> regexp 0796[48]", but the tree doesn't expand at the hit
> locations. If I manually expand the tree at the locations of the
> hits, the results are highlighted. It makes no difference if the
> hits are in a headline or in notes beneath a headline.
>
> Remove the ARCHIVE tag from the "Support during September"
> headline with `C-c C-x a' and redo the sparse tree. Everything
> now appears expanded as I'd expect.
Hmm, maybe the outline behavior of hide-subtree has changed???
Anyway, we now just use our own function for this.
Adam Spiers writes:
> The code for handling %^{PROP}p in org-remember templates seems to
> have a bug:
>
> ((equal char "p")
> (edebug)
> (let*
> ((prop (org-substring-no-properties prompt))
> (pall (concat prop "_ALL"))
> (allowed
> (with-current-buffer
> (get-buffer (file-name-nondirectory file))
>
> Here get-buffer can return nil, in which case `org-remember' fails
> with the error:
>
> Wrong type argument: stringp, nil
>
> It seems to be assuming that the non-directory part of the filename
> corresponds to the buffer name, but this is not guaranteed. Perhaps I
> noticed it because I am using uniquify.el ?
RET will only do this if the cursor is on the link and
`org-return-follows-link' is set. `C-c C-o' will work anywhere in the
line.
Requested by Chris Leyon.
The following keys now do archiving
C-c C-x C-a archive using the command specified in
`org-archive-default-command'
This variable is by default set to `org-archive-subtree', which means
arching to the archive file.
The three specific archiving commands are available through
C-c C-x C-s archive to archive file
C-c C-x a toggle the archive tag
C-c C-x A move to archive sibling
These bindings work the same in an Org file, and in the agenda.
In addition:
- In the agenda you can also use `a' to call the default archiving
command, but you need to confirm the command with `y' so that this
cannot easily happen by accident.
- For backward compatibility, `C-c $' in an org-mode file, and `$' in
the agenda buffer continue to archive to archive file.
Dan Davison writes:
> If a file contains "-1" followed by a newline and nothing else,
> org-table-import on that file fails. The first commit with this
> property is a commit (below) to do with CVS tables made a few
> days ago. I have given up trying to work out a good solution to
> this :) In case it is useful, the failure occurs when
> org-table-align is called at the end of
> org-table-convert-region. I think it is long-standing behaviour
> that hitting tab inside of
>
> |-1|
>
> doesn't make a table containing "-1", so presumably there is
> something different about the context in which org-table-align is
> now being called.
Daniel Hackney writes:
> When attempting to use radio lists for exporting in LaTeX, I
> found that they didn't work. I am using the example file shown
> below:
>
> ---BEGIN_EXAMPLE---
>
> #+LaTeX: % BEGIN RECEIVE ORGLST programs
> #+LaTeX: % END RECEIVE ORGLST programs
>
> #+ORGLST: SEND programs org-list-to-latex
> - Emacs text editor
> - Ubuntu Linux
> - Git version control system
> - Firefox web browser
> - Drupal content management system
> - Subversion version control system
> - Eclipse integrated development environment
>
> ---END_EXAMPLE---
>
> I eventually ran `org-list-send-list' manually on the list, and
> got the following error:
>
> funcall: Wrong type argument: number-or-marker-p, (unordered
> #("Emacs text editor" [snip...]
>
> I started debugging `org-list-send-list' and found that the error
> occurred when calling (funcall transform list). Looking back, I
> saw that `transform' was assigned (in the let*) after
> `item-beginning'. Stepping through the execution, I saw that
> `transform' was being assigned a value of `-'. It turns out when
> assigning to `item-beginning', (org-list-item-beginning) is
> called, which runs a regular expression with a capture group,
> overwriting the previously matched capture group.
>
> Luckily, the fix is simple; all that needs be done is to switch
> the assignment to `transform' with `item-beginning' so the regex
> in (org-list-item-beginning) doesn't override the match-string
> data. I tried this fix out and it worked perfectly.
Brenton Kenkel writes:
> I found an apparent minor bug with links containing quotation marks in
> LaTeX export. If the first character in the name of a link is a
> quotation mark, it is converted to a closing mark rather than an
> opening mark. For example:
>
> ,----
> | * test
> |
> | [[http://www.google.com]["hello"]]
> | [[http://www.google.com]["two" "quotes"]]
> `----
>
> This produces:
>
> ,----
> | \href{http://www.google.com}{''hello''}
> | \href{http://www.google.com}{''two'' ``quotes''}
> `----
John Wiegley writes:
> In `org-id-update-id-locations', it uses the value of
> org-id-extra-files and calls file-truename on all its members,
> assuming them to be filenames.
>
> However, my `org-id-extra-files' is the symbol
> `org-agenda-text-search-extra-files', which contains the symbol
> `agenda-archives'. I get an error because Org is calling
> file-truename on that symbol. This stops me from doing "id"
> based link lookups within archive files.
Richard Moreland writes:
> (setq org-agenda-custom-commands
> '(("X" agenda "" nil ("agenda.html"))))
> ;; This seems to break org-mobile-push?
> ;;(setq org-agenda-exporter-settings
> ;; '((org-agenda-add-entry-text-maxlines 5)
> ;; (htmlize-output-type 'font)))
>
> I have the lines above in my .emacs file. When I uncomment the 3
> commented lines, org-mobile-push just hangs after OVERVIEW.
>
> I don't understand exactly what is going on, but if I hit C-g or
> C-c enough I can regain control, but the sync never finishes.
Kai Tetzlaff writes:
> i noticed that when using the org-mode clock persistence, the
> stored clock data gets deleted when i start emacs and exit again
> without turning on org-mode in between.
>
> When looking at org-clock-persistence-insinuate it looks like
> org-clock load will only run after org-mode gets started whereas
> org-clock-save will always be called when exiting emacs:
>
> (defun org-clock-persistence-insinuate ()
> "Set up hooks for clock persistence"
> (add-hook 'org-mode-hook 'org-clock-load)
> (add-hook 'kill-emacs-hook 'org-clock-save))
>
> Not running org-mode-hook (i.e. not starting org-mode) thus does
> not load clock data but org-clock-save overwrites any prviously
> saved data when exiting emacs.
>
> An easy fix for that would be to just add org-clock-load to e.g.
> emacs-startup-hook. But this will only work if the code in
> org-clock-load does not depend on any org-mode initialization
> code (or would require loading org-mode).
>
> So org-clock-save should probably check if org-clock-load has
> been running during the current emacs session (or if clock
> persistence was just enabled) and only then save clock data when
> exiting emacs. I tried to add this to the code in org-clock-save:
Now the recommendation is to use clock persistence only for the
history, and to use John's code for resolving a clock that has been
idle (either because the user stopped working or exited Emacs).
org-habit.el (org-habit-get-priority): A new function that determines
the relative priority of a habit, based on how long past its scheduled
date it is, and how near the deadline is.
org-agenda.el (org-agenda-get-scheduled): Set habit priority using
`org-habit-get-priority'.
org-habit.el: New file, which implements code to build a "habit
consistency graph".
org-agenda.el (org-agenda-get-deadlines)
(org-agenda-get-scheduled): Display consistency graphs when outputting
habits into the agenda. The graphs are always relative to the current
time.
(org-format-agenda-item): Added new parameter `habitp', which indicates
whether we are formatting a habit or not. Do not display "extra"
leading information if habitp is true.
(org-repeat-re): Improved regexp to include .+ and ++ leaders for repeat
strings.
(org-get-repeat): Now takes a string parameter `tagline', so the caller
can obtain the SCHEDULED repeat, or the DEADLINE repeat.
(org-clock-disable-clock-resolution): New customization variable that
disable automatic clock resolution on clock in.
(org-clock-in): If `org-clock-disable-clock-resolution' is set, do not
automatically resolve anything. This is does not affect idle-time
resolution, however, if `org-clock-idle-time' is set.
(org-agenda-auto-exclude-function): New customization variable for
allowing the user to create an "auto exclusion" filter for doing
context-aware auto tag filtering.
(org-agenda-filter-by-tag): Changes to support the use of
`org-agenda-auto-exclude-function'. See the new manual addition,.
See the new manual section on "Resolving idle time".
(org-clock-resolve-clock): If keeping or subtracting time results in a
clock out at a time in the past, and if the resolution occurred due to
idleness or invoking `M-x org-resolve-clocks', remember that past moment
in time. On the next clock in, the user will be prompted to see if they
want to back-date their new clock to then.
(org-clock-resolve): Do not jump the user to the location of a dangling
clock if the resolution is occuring due to an idle timeout. In that
case there is typically only one dangling clock, the active one, and
there is no value gained by shuffling their windows around to show it to
them. Being prompted to resolve an idle clock should be as inobtrusive
as possible.
(org-resolve-clocks-if-idle): New function that resolves only the
currently active clock if the user has exceeded the time returned by
`org-user-idle-seconds', based on the value of `org-clock-idle-time'.
(org-clock-in): If, after resolving clocks,
(org-clock-out): Cancel the `org-clock-idle-timer' on clock out.
This file should be with the other org files, and not in the staging
area. Also, when file names in mobileorg.org are interpreted, this
should be relative to org-directory. So we also require now that the
user set this variable.
(org-clock-resolve-clock): New function that resolves a clock to a
specific time, closing or resuming as need be, and possibly even
starting a new clock.
(org-clock-resolve): New function used by `org-resolve-clocks' that sets
up for the call to `org-clock-resolve-clock'. It determines the time to
resolve to based on a single-character selection from the user to either
keep time, subtract away time or cancel the clock.
(org-resolve-clocks): New user command which resolves dangling clocks --
that is, open but not active -- anywhere in the file list returned by
`org-files-list'.
(org-clock-in): Automatically resolve dangling clocks whenever a user
clocks in.
(org-clock-cancel): If the user cancels the solely clock in a LOGBOOK,
remove the empty drawer.
(org-clock-idle-time): New user customizable option for detecting
whether the user has left a clock idle. Note: it is only used in this
commit to test whether it's worthwhile to check OS X to get the Mac
user's current idle time. If the Emacs idle time is less than the
value, the user hasn't been away long enough to be worth checking (a
more expensive test than just getting Emacs idle time).
(org-user-idle-seconds, org-mac-idle-seconds)
(org-emacs-idle-seconds): This three functions, in conjunction
with the user customization variable `org-clock-idle-time', return
the number of seconds (as a floating point) that the user has been
away from their Emacs (or, if running on OS X, their computer).
(org-find-open-clocks): New function that returns a list of all open
clocks in the given FILE. Note that each clock it returns is a cons
cell of the format (MARKER . START-TIME). This "clock" value is used by
several of the new clock module utility functions.
(org-is-active-clock): New inline function which tests whether the given
clock value is the same as the currently active clock. Returns non-nil
if this is the case.
(org-with-clock-position): New macro that evaluates FORMS with point in
the buffer and at the position of the given clock. Changes to the
current clock are global.
(org-with-clock): New macro that evaluates FORMS with point in the
buffer and at the position of the given clock. However, changes to the
current clock are local and have no effect on the user's active clock.
This allows, for example, far any clock to be cancelled without
cancelling the active clock.
(org-clock-clock-in): New inline function that switches the active clock
to the given clock. If either the argument RESUME, or the global
`org-clock-in-resume', are non-nil, it will resume a clock that was
previously left open.
(org-clock-clock-out): New inline function that clocks out the given
clock value without affecting the currently active clock.
(org-clock-clock-cancel): New inline function that cancels the given
clock value without affecting the currently active clock.
(org-clock-out): Accept new third parameter `at-time', which permits a
clock to be clocked out at a specific time. Note that no attempt is
made to verify that the clock out time is later than the clock in time.
(org-files-list): New utility function for returning a list of all open
org-mode buffers, plus all files used to build the agenda buffer. Note
that not all the files will necessarily be visited by a buffer at time
of call.
(org-entry-beginning-position): Like the function
`line-beginning-position', this inline function returns the beginning
position of the current heading/entry.
(org-entry-end-position): Like the function `line-end-position', this
inline function returns the end position of the current heading/entry.
(org-clock-idle-time): New user customizable option for detecting
whether the user has left a clock idle. Note: it is only used in this
commit to test whether it's worthwhile to check OS X to get the Mac
user's current idle time. If the Emacs idle time is less than the
value, the user hasn't been away long enough to be worth checking (a
more expensive test than just getting Emacs idle time).
(org-user-idle-seconds, org-mac-idle-seconds)
(org-emacs-idle-seconds): This three functions, in conjunction
with the user customization variable `org-clock-idle-time', return
the number of seconds (as a floating point) that the user has been
away from their Emacs (or, if running on OS X, their computer).
(org-find-open-clocks): New function that returns a list of all open
clocks in the given FILE. Note that each clock it returns is a cons
cell of the format (MARKER . START-TIME). This "clock" value is used by
several of the new clock module utility functions.
(org-is-active-clock): New inline function which tests whether the given
clock value is the same as the currently active clock. Returns non-nil
if this is the case.
(org-with-clock-position): New macro that evaluates FORMS with point in
the buffer and at the position of the given clock. Changes to the
current clock are global.
(org-with-clock): New macro that evaluates FORMS with point in the
buffer and at the position of the given clock. However, changes to the
current clock are local and have no effect on the user's active clock.
This allows, for example, far any clock to be cancelled without
cancelling the active clock.
(org-clock-clock-in): New inline function that switches the active clock
to the given clock. If either the argument RESUME, or the global
`org-clock-in-resume', are non-nil, it will resume a clock that was
previously left open.
(org-clock-clock-out): New inline function that clocks out the given
clock value without affecting the currently active clock.
(org-clock-clock-cancel): New inline function that cancels the given
clock value without affecting the currently active clock.
(org-clock-out): Accept new third parameter `at-time', which permits a
clock to be clocked out at a specific time. Note that no attempt is
made to verify that the clock out time is later than the clock in time.
(org-files-list): New utility function for returning a list of all open
org-mode buffers, plus all files used to build the agenda buffer. Note
that not all the files will necessarily be visited by a buffer at time
of call.
(org-entry-beginning-position): Like the function
`line-beginning-position', this inline function returns the beginning
position of the current heading/entry.
(org-entry-end-position): Like the function `line-end-position', this
inline function returns the end position of the current heading/entry.
The default in search view is not that the search expression is
searched for as a substring, i.e. the different words must occur in
direct sequence. The old way is only used it the first word in
the search string is preceded by a plus or a minus.
This was, more-or-less, requested by John Wiegley.
When a backend selects its #+begin_backend ... #+end_backend
code, the markers need to be removed so that a package like
org-special-blocks.el does not try to work on the block again.
Bernt Hansen writes:
> If you narrow to subtree when there is a following task the narrowed
> buffer has a blank line at the end. If you are on this line and
> clock-in it starts the clock for the _following_ task (outside the
> narrowed subtree) and not the task you are looking at.
>
> I stumbled across this today because the following task was already
> over the estimated limit when I clocked it in - which triggered my
> alarm sound.
>
> ,----[ test.org ]
> | #+STARTUP:
> | * TODO One
> | * TODO Two
> `----
>
> ,----[ minimal.emacs ]
> | (add-to-list 'load-path (expand-file-name "~/git/org-mode/lisp"))
> | (add-to-list 'auto-mode-alist
> | '("\\.\\(org\\|org_archive\\|txt\\)$" . org-mode))
> | (require 'org-install)
> |
> | (global-set-key "\C-cl" 'org-store-link)
> | (global-set-key "\C-ca" 'org-agenda)
> | (global-set-key "\C-cb" 'org-iswitchb)
> `----
>
> Key sequence to reproduce:
>
> $ emacs -q -l minimal.emacs test.org
>
> | Key | Notes |
> |-------------------------------+-------------------------------|
> | C-n | Go to first task '* TODO One' |
> | M-x org-narrow-to-subtree RET | Narrow to subtree |
> | C-n | Move to last blank line |
> | C-c C-x C-i | Clock in (next) task |
> |-------------------------------+-------------------------------|
>
> -Bernt
>
> Emacs : GNU Emacs 22.2.1 (i486-pc-linux-gnu, GTK+ Version 2.12.11)
> of 2008-11-09 on raven, modified by Debian
> Package: Org-mode version 6.31trans (release_6.31.8.g7485)
PT writes:
> Currently, I'm using Google Calendar and it's quick add syntax is very
> convenient:
>
> http://www.google.com/support/calendar/bin/answer.py?hl=en&answer=36604#text
>
>
> Of course, Org has similar capabilites, but I found one thing which
> google calendar does better: if it's 4pm and I add an event for 8am
> then GCal schedules it for 8am tomorrow.
>
> Org, on the the other hand, schedules it for 8am today even if that
> time is already passed.
>
> I never add past events and I think it's quite atypical. Shouldn't be
> an option similar to org-read-date-prefer-future for times too, so
> that timestamps also prefer the future when no date given?
This is now possible, but it is not the default. You need to set
(setq org-read-date-prefer-future 'time)
Thomas S. Dye writes:
> I'm trying to generate $^{14}$C, or an equivalent, from org-mode
> to represent the isotope of carbon important in archaeological
> dating.
>
> Reading the manual, I tried this:
>
> ** A Brief History of Attempts to Interpret the ^{14}C Dates
> *** The ^{14}C Dates
>
> Which, in my #+LaTeX_CLASS: beamer export, yields
>
> \subsection{A Brief History of Attempts to Interpret the \^{}{14}C Dates}
> ...
> \begin{frame}\frametitle{The \^{}{14}C Dates}
>
> The problem seems to be the space before the ^.
>
> This input:
>
> ** A Brief History of Attempts to Interpret the x^{14}C Dates
> *** The x^{14}C Dates
>
> yields the correct LaTeX:
>
> \subsection{A Brief History of Attempts to Interpret the x$^{\mathrm{14}}$C Dates}
> ...
> \begin{frame}\frametitle{The x$^{\mathrm{14}}$C Dates}
>
> Am I missing something? Or, is the LaTeX export thrown off by
> the space before ^?
Indeed, a space before the caret was not allowed in LaTeX export
Peter Westlake writes:
> One small thing, though - in the agenda TODO view, pressing "t"
> to mark the task as Done messes up the layout:
>
> [[http://orgmode.org][Org-Mode]]: TODO Demonstrate problem with link
> in category
>
> (which appears as:
>
> Org-Mode: TODO Demonstrate problem with link in category)
>
>
> Press T on that line:
>
> [[http://orgmode.org][Org-Mode]]: TODO Demonstrate problemDONE
> Demonstrate problem with link in category
>
> (which appears as:
>
> Org-Mode: TODO Demonstrate problemDONE Demonstrate problem with
> link in category)
Matt Lundin writes:
> I have org-footnote-section set to "Footnotes." If I insert a new
> footnote while...
>
> 1. the "* Footnotes" tree already exists and
>
> 2. the "* Footnotes" tree is folded
>
> ...the footnote definition label is inserted, but the "* Footnotes"
> subtree remains folded and the cursor jumps to the "* Footnotes"
> headline rather than the definition line.
>
> I've tried using org-reveal (C-c C-r) to open the "Footnotes" section,
> but nothing happens. I've tried typing C-c C-c to go back to the
> footnote, but since the cursor is on a headline, the result is a tag
> prompt. When I hit TAB to cycle, the cursor remains on the headline.
The new variable org-mobile-files can now be configured to include
non-agenda files into the staging area for MobileOrg. Furthermore,
files that are located in a subdirectory of `org-directory' will also
end up in a sub-directory in the staging area.
Dan Davison writes:
> If you start a numbered list with
>
> 1.
>
> and hit M-RET then you get
>
> 2.
> ^
> with a space, i.e. '2. '
>
> However, when creating the 10th list item, there is no space after
> '10.'. Same for 99 -> 100. This isn't entirely trivial, because if you
> start typing blindly after hitting M-RET, then the line you have created
> (lacking the space) will not be recognised as a list item and so
> e.g. the next M-RET will create a new heading, not a list item. [Has
> this changed recently? This seems like something obvious that others
> would have noticed.]
>
> Here's my patch.
>
> --8<---------------cut here---------------start------------->8---
> diff --git a/lisp/org-list.el b/lisp/org-list.el
> index 2fea57b..8ece3ea 100644
> --- a/lisp/org-list.el
> +++ b/lisp/org-list.el
> @@ -813,7 +813,7 @@ with something like \"1.\" or \"2)\"."
> (buffer-substring (point-at-bol) (match-beginning 3))))
> ;; (term (substring (match-string 3) -1))
> ind1 (n (1- arg))
> - fmt bobp old new)
> + fmt bobp old new delta)
> ;; find where this list begins
> (org-beginning-of-item-list)
> (setq bobp (bobp))
> @@ -835,7 +835,9 @@ with something like \"1.\" or \"2)\"."
> (delete-region (match-beginning 2) (match-end 2))
> (goto-char (match-beginning 2))
> (insert (setq new (format fmt (setq n (1+ n)))))
> - (org-shift-item-indentation (- (length new) (length old))))))
> + (setq delta (- (length new) (length old)))
> + (org-shift-item-indentation delta)
> + (if (= (org-current-line) line) (setq col (+ col delta))))))
> (org-goto-line line)
> (org-move-to-column col)))
> --8<---------------cut here---------------end--------------->8---
>
> Dan
Jeff Kowalczyk writes:
> Is there a way to escape backslashes (\) in code and verbatim that
> will export to LaTeX correctly?
>
> When writing =\\host\share= or =C:\path\to=, pdftolatex output is
> incorrect.
George Pearson writes:
> I have been getting the following message in the minibuffer
> area when marking tasks done in the daily agenda:
>
> Error in post-command-hook: (error Cannot switch buffers in a dedicated
> window)
>
> The item in the underlying org file IS marked DONE, and items with
> repeaters appear to be rescheduled properly. HOWEVER, the log lines,
> like
>
> - State "DONE" from "TODO" [2009-09-07 Mon 10:36]
>
> do NOT appear.
>
> Note I have been using:
>
> org-agenda-window-setup 'other-frame
>
> for some time now, but I notice there has been a recent change
> related to this variable. Could this be the source of the
> problem?
>
> I believe the error message appears on other operations in the
> daily agenda as well, but have not yet studied this in detail.
Many agenda commands split the current window, which is not allowed on
a frame containing a dedicated window.
Therefore, we now just kill the frame by hand when exiting the agenda.
priority
So far the headline had to match the one specified in the template
exactly, except for tags. Now a TODO keyword and a priority can be
added, and the headline will still be found.
Reported by Samuel Wales and Bernt Hansen.
Jeff Kowalczyk writes:
> I frequently use clocktables, and always use scope: subtree. The
> default scope is file.
>
> If it doesn't exist already (I didn't find it with grep), an org
> customization variable for this preference would be very helpful.
Francesco Pizzolante writes:
> I'm using orgmode 6.30c and I still have this problem: if
> the #+TBLNAME: tag is not located in column 0, the remote
> reference does not work.
>
> Here's my little test:
>
> #+TBLNAME: A
> | | T |
> |---+-------|
> | | 2.00 |
> | | 5.00 |
> |---+-------|
> | # | 9.00 |
> | ^ | total |
> #+TBLFM: $2=vsum(@-I..@-II);%.2f
>
> #+TBLNAME: price
> | T | PU | Total |
> |------+-------+-------|
> | 9.00 | 10.25 | 92.25 |
> |------+-------+-------|
> #+TBLFM: @2$1=remote(A,$total);%.2f::@2$3=$1*$2;%.2f
>
>
> Just add a few spaces at the first line and when you recompute
> the second table you get a "Can't find remote table A" message.
>
> Moreover, in a LaTeX environment, using the orgtbl minor mode,
> the highlighting (font locking) does not work on the #+TBLNAME:
> line, even if located in column 0.
Peter Westlake writes:
> Could I request this as a small feature enhancement, please?
> Commands like org-refile have an agenda equivalent so that
> the same keys work in the agenda, and it would be very nice
> to be able to store a link to an item that way as well.
When odd levels are being used, change the interpretation of a
numerical arg to S-TAB.
Michael Brand writes:
> I like the org-indent-mode with the soft-indentation but even more I
> like the hard-indentation with `#+STARTUP: odd hidestars' instead for
> which I have a question.
>
> This is the content of the example file oddeven:
> -*- mode: org -*-
> #+STARTUP: oddeven hidestars content
> * 1 Org Mode
> ** 1.1 Introduction
> *** 1.1.1 Installation
>
> This is the content of the example file odd:
> -*- mode: org -*-
> #+STARTUP: odd hidestars content
> * 1 Org Mode
> *** 1.1 Introduction
> ***** 1.1.1 Installation
>
> The different _Emacs-faces_ (colors) for the heading levels are the same
> when comparing the two files. This Emacs-internal adaptation I
> appreciate a lot.
>
> C-u 2 S-Tab shows _two_ levels with the file oddeven but only _one_ with
> the file odd. Is this how it is intended to work for the file odd?
org.el (org-offer-links-in-entry): Don't use "Select link" as a prompt
in the temporary window.
org-agenda.el (org-agenda-bulk-mark): Use a slightly soberer prefix for
marked entries in the agenda view.
> > New mode to show some entry body text in the agenda
> > ----------------------------------------------------
> > There is now a new agenda sub-mode called
> > `org-agenda-entry-text-mode'. It is toggled with the `E' key.
> > When active, all entries in the agenda will be accompanied by a
> > few lines from the outline entry. The amount of text can be
> > customized with the variable `org-agenda-entry-text-maxlines'.
>
>
> this already avoids displaying drawer lines.
> I also see lines like:
>
> - State "DONE" from "WARTEN" [2009-08-04 Di 16:19]
> - State "DONE" from "WARTEN" [2009-07-02 Do 09:43]
> ...
>
> and in my remeber templates I always create lines like:
>
> created: [2009-08-03 Mo 11:46]
>
> with the creation date of the entry.
> Would it be possible and make sense to set up a variable for a
> regexp to exclude lines like the ones above from showing?
This commit sets up such a variable, and also a hook.
Matt Lundin writes:
> When I call org-remember or org-store-link above the first headline in
> an org buffer, I receive the following error message:
>
> Before first headline at position 1 in buffer index.org
>
> It seems that either org-remember or org-store-link (or both) calls
> org-back-to-heading in order to grab the relevant heading for
> annotation. As a result, if I try to store a link above the first
> heading, emacs spits out the error message above because there is no
> heading to return to.
>
> Is this the intended behavior? Sometimes I prefer to create a link to
> the file as a whole rather than to a particular headline. E.g., I might
> want to create a todo to organize notes.org, which is not an agenda
> file. In this instance, it does not matter whether org-remember creates
> a link to a particular headline. In fact, I would prefer a link to the
> file as a whole and thus expect to be able to store a link while on the
> first empty line of the file or on #+TITLE.
Tassilo Horn writes:
> When I want to set a tag using `C-c C-q TAB' I get a iswitchb completion
> prompt, cause org-completion-use-iswitchb is t. I also use iswitchb's
> virtual files feature (iswitchb-use-virtual-buffers set to t), which
> includes files that aren't opened in a buffer, but are in the recentf
> list. This is a cool thing when switching buffers (I barely use C-x C-f
> anymore and switch to the virtual buffer instead), but totally useless
> and annoying for tab completion in org.
>
> So when completing anything (files/tags/...) in org with iswitchb,
> switchb-use-virtual-buffers should be let-bound to nil before.
PT writes:
> I tried this new setting with 6.30 and it works well, thanks for
> this.
>
> The only strange case is when a header line doesn't have any
> content, only empty lines.
>
> So if there are 2 empty lines between headers
>
> * header1
>
>
> * header2
>
>
> Then the first empty line after header1 is folded regardless of
> the -1 setting. If I understand the feature correctly no folding
> should occur in this case either.
The category can contain a bracket link. This commit makes sure that
the prefix in the agenda looks OK if there is a link, and that the
link is accessible with `C-c C-o 0'.
Karl Stump writes:
> Table Editing Cycle With Multiple Windows On One Buffer Does Not
> Return to Start State
>
> When I have two windows open on two buffers, one to a table in a
> file that I'm editing, the other to some other file of interest,
> the editing cycle of C-` ... C-c C-c works great, meaning that
> when the cycle is finished, the windows are restored to the start
> state.
>
> But when I have two windows open on the same buffer, one window
> on the table, and the other window somewhere else, the editing
> cycle does not restore to the beginning state.
Peter Westlake writes:
> This is quite obscure, and an odd corner case, but here it is.
>
> If you have an item which is:
>
> - a TODO
> - scheduled
> - ordered
> - blocked by a child TODO
>
> then it leaves an empty line in the agenda.
>
> Here's a test case:
> ,----
> | * Press t r on this line in the agenda
> | SCHEDULED: <2009-09-02 Wed>
> | :PROPERTIES:
> | :ORDERED: t
> | :END:
> | *** TODO Report invisible scheduled items
> `----
>
> C-a a a will show an agenda with "Scheduled: Press t r ...".
> Press "t" on that line to add a TODO.
> Press "r" to redisplay, and see the line go blank.
>
> Peter.
There was an issue that lines starting with a space followed by #
would be protected when importing the file, but not unprotected when
formatting the example. The reason for this issue is that we recently
changed to protect indented #+ lines.
Karl Stump writes:
> When exporting a table with a horizontal line the column count is wrong.
>
> Output from pdflatex run:
>
> ! Extra alignment tab has been changed to \cr.
> <template> \endtemplate
>
> l.32 ....\multicolumn{4}{r}{Continued on next page}
> \
> ?
>
> Here's the table in the tex file:
>
> \begin{longtable}{||lll||}
> \caption{This is a long table with lines around and between cells}\\
> Heading1 & Heading2 & Heading3 \\
> \hline
> \endhead
> \hline\multicolumn{4}{r}{Continued on next page}\
> \endfoot
> \endlastfoot
> \hline
> alpha & beta & gamma \\
> & & \\
> \end{longtable}
>
> Here's the org file:
>
> ** table export test
>
> #+CAPTION: This is a long table with lines around and between cells
> #+LATEX_HEADER: \usepackage[landscape]{geometry}
> #+LATEX_HEADER: \geometry{left=0.12in,right=0.12in,top=0.25in,bottom=0.25in}
> #+ATTR_LaTeX: longtable align=||lll||
>
> | / | <30> | <10> | <10> |
> | | Heading1 | Heading2 | Heading3 |
> |---+----------+----------+----------|
> | | alpha | beta | gamma |
> | | | | |
Nick Dokos replies:
> I believe it's because of the dummy "calculation-mark" column,
> which is not exported. However, the variable org-table-last-alignment
> (a list, whose length becomes the value of the \multicolumn argument)
> ends up having the value (nil nil nil nil), i.e. it counts the dummy
> column as well. What the proper place to adjust the value is, I don't
> know, but it should be easy for Carsten to fix it. For the time being,
> you can either get rid of the dummy row and column (e.g. if you don't
> need the widths) or fix it by hand in the LaTeX file.
Indeed, and this commit pops `org-table-last-alignment' if the first
column has been removed by `org-table-clean-before-export'. The same
problem must have caused a one-off error when setting the alignment in
LaTeX tables, bu it seems nobody has noticed this so far. Anyway,
also this is fixed now.
Bernt Hansen writes:
> I ran into this a few weeks ago and it's been bugging me.
>
> I reorganized a project which had a deadline on the main task and moved
> it down to multiple subtasks in the project.
>
> ,----
> | * TODO Project task
> | DEADLINE: <2009-08-28 Fri>
> | ** TODO Step 1
> | ** TODO Step 2
> | ...
> | ** TODO Step n
> `----
>
> I decided the DEADLINE really doesn't belong at the top -- since the
> deadline was for step 2 (and a few other tasks)... so I moved it the
> hard way. Instead of cutting it out and pasting it back in the right
> tree I just used C-c C-d and entered the same date on step 2 (because I
> was moving the date a bit from the original date).
>
> ,----
> | * TODO Project task
> | DEADLINE: <2009-08-28 Fri>
> | ** TODO Step 1
> | ** TODO Step 2
> | DEADLINE: <2009-08-28 Fri>
> | ...
> | ** TODO Step n
> `----
>
> Now to remove the deadline from the Project task I just did C-u C-c C-d
> on the Project task but this removed all the deadlines in the subtree
> and my deadline in Step 2 (and others) is now gone.
>
> AFAICT SCHEDULED: works the same way. This doesn't feel natural to me
> but I know it is documented this way.
>
> Does the way it works now really make sense or would just removing the
> deadline from the task you are working on be better.
>
> C-c C-d sets a deadline just for this task, so it felt natural to me
> that C-u C-c C-d would remove the deadline just for this task -- but
> that's what I get for not reading the manual (or forgetting since I read
> it ;)
Bernt Hansen writes:
> I think I have something that is reproducible.
>
> ,----[ /tmp/x.org ]
> |
> | * Refile Targets
> | ** TODO One
> | ** TODO Two
> | ** TODO Three
> | ** TODO Four
> | ** TODO Five
> | ** TODO Six
> | *** TODO Six.one
> | *** TODO Six.two
> | **** TODO Clock me
> | ** TODO Seven
> | ** TODO Eight
> | ** TODO Nine
> | ** TODO Ten
> | * Refile Tasks
> | ** TODO Refile Me
> `----
>
> ,----[ /tmp/minimal.emacs ]
> | (add-to-list 'load-path (expand-file-name "~/git/org-mode/lisp"))
> | (add-to-list 'auto-mode-alist '("\\.\\(org\\|org_archive\\|txt\\)$" . org-mode))
> | (require 'org-install)
> |
> | (global-set-key "\C-cl" 'org-store-link)
> | (global-set-key "\C-ca" 'org-agenda)
> | (global-set-key "\C-cb" 'org-iswitchb)
> |
> | (setq org-log-done (quote time))
> | (setq org-log-into-drawer t)
> | (setq org-agenda-files '("/tmp/x.org"))
> | (setq user-init-file "/tmp/custom.el")
> |
> | (setq org-refile-allow-creating-parent-nodes nil)
> | (setq org-refile-targets (quote ((nil :maxlevel . 2) (org-agenda-files :maxlevel . 2))))
> | (setq org-refile-use-outline-path nil)
> | (setq org-todo-keywords (quote ((sequence "TODO(t!)" "STARTED(s!)" "|" "DONE(d!/!)") (sequence "WAITING(w@/!)" "SOMEDAY(S!)" "OPEN(O@)" "|" "CANCELLED(c@/!)") (sequence "QUOTE(q!)" "QUOTED(Q!)" "|" "APPROVED(A@)" "EXPIRED(E@)" "REJECTED(R@)"))))
> `----
>
> Steps to reproduce:
>
> 1. Save the files /tmp/x.org and /tmp/minimal.emacs
> 2. emacs -q -l /tmp/minimal.emacs /tmp/x.org
> 3. Go to CONTENTS view with S-TAB twice
> 4. Put point on **** TODO Clock Me
> 5. Clock in the task with C-c C-x C-i
>
> This adds a logbook drawer with the clock
>
> 6. Fold to OVERVIEW view with S-TAB
>
> So it looks like this
>
> ,----[ x.org folder ]
> |
> | * Refile Targets...
> | * Refile Tasks...
> `----
>
> 7. M-x org-clock-goto
>
> This reveals the buffer like so:
>
> ,----
> |
> | * Refile Targets...
> | **** TODO Clock me
> | :LOGBOOK:...
> | ...
> | * Refile Tasks...
> `----
>
> I think this is the critical step.
>
> 8. Put point on Refile Tasks
> 9. Show task to refile with TAB
> 10. Put point on ** TODO Refile Me
> 11. Refile to Ten with C-c C-w Ten RET
> 12. Put point on Refile Me
> 13. Reveal with C-c C-r
>
> Shows that we are under TODO Ten. So far so good
>
> ,----
> |
> | * Refile Targets...
> | **** TODO Clock me
> | :LOGBOOK:...
> | ...
> | ** TODO Ten
> | *** TODO Refile Me
> | * Refile Tasks
> `----
>
> 14. Now repeat steps 10-13 but refile to 'Two' instead of 'Ten'
>
> This goes to the wrong place. This files under Nine for me
>
> ,----
> |
> | * Refile Targets...
> | **** TODO Clock me
> | :LOGBOOK:...
> | ...
> | ** TODO Nine
> | *** TODO Refile Me
> | ** TODO Ten
> | * Refile Tasks
> `----
>
> 15. Repeat steps 10-13 with refiling to 'Two' each time
>
> This moves Refile Me up one task at a time until it gets to Two
> ie. it refiles to Eight, then Seven, then Six, then Five, then
> Four then Three, then Two.
>
> If you show contents view with S-TAB and then refile it goes to the
> right place immediately. So this definitely has something to do with
> the folded view of the org file.
>
Henry Atting writes:
> If org agenda is displayed in an other frame then windows aren*t
> restored when quitting, I have to kill the frame manually. I
> really would like it to behave like e.g. gnus-other-frame which
> automatically kills his frame on quitting.
The new keys are b and f. This used to be on the cursor keys, but
they do now again do cursor motion.
This is a significant change in the UI, I hope this will not cause too
many problems.
Longmin Wang writes:
> Hi,
>
> I am using org-mode integrated in emacs 23.1.1. When I export
> the org file to html file, the enumerations will be interrupted
> by some displayed math formulae. For example, the codes
>
> 1. The first.
>
> 2. A displayed formula: \[ \int_0^{+\infty} \frac{c}{1+x^2}dx=1. \]
>
> 3. The third.
>
> will generate
>
> 1. The first.
> 2. A displayed formula:
> <the formula>
> 1. The third.
>
> Is it a bug? Or I made some mistakes in the source file.
`org-cycle-separator-lines' can now get a negative value, to indicate
that, if the number of empty lines before a visible entry is greater
than the specified number, then *all* empty lines should be shown.
Use `gnus-summary-article-header' function when in gnus-summary-mode.
This way the article doesn't get displayed unnecessarily. We don't use
this function in the gnus-article-mode because it is not reliable.
Thanks to Leo for this suggestion.
Eric Schulte writes:
> Attached is a small patch for a small issue.
>
> Sometimes a language uses a major mode which can't be guessed
> from it's name. This patch introduces the `org-src-lang-modes'
> variable which can be used to map language names to major modes
> when this is the case. This is used when editing a source-code
> block, or when exporting fontified source-code with htmlize.
>
> So far the only instance of this that I know of is ocaml and
> tuareg-mode, so that's the only thing that `org-src-lang-modes'
> is pre-populated with. Maybe there are other instances as well?
Nick Dokos writes:
> I define a LaTeX macro at the top of my document, like so:
>
> ,----
> | ...
> | #+LATEX_HEADER: \newcommand{\rowstyle}[1]{\gdef\currentrowstyle{#1}%
> | #+LATEX_HEADER: #1\ignorespaces
> | #+LATEX_HEADER: }
> | ...
> `----
>
> and export - I get the following inserted:
>
> ,----
> | ...
> | \begin{document}
> |
> |
> |
> |
> |
> | \$\^{}{1}\$ FOOTNOTE DEFINITION NOT FOUND: 1
> | ...
> `----
>
> Obviously, the macro argument spec is mistaken for a footnote.
This bug was caused by commit
8c177dc832, and reported by Matt
Lundin. The problem was that this commit tried to remove the text
propertes of the MATCH part of an agenda command. However, in block
commands, the MATCH part is not a string.
An entry `#+TODO:' without content make `M-x org-mode' fail.
While it may cause problems to have no TODO keywords defined, this
should not make entering the mode fail.
It is possible that the regular expressions for LaTeX snippets match
at nested locations. For example, Nick Dokos submitted this:
,----
| #+LaTeX_HEADER: \usepackage{amsmath}
|
| * foo
|
| \[
| \begin{matrix}
| 1&d\\
| d&d\\
| \end{matrix}
| \]
|
`----
where the snippet regexps match at \[ ... \] and also at
\\begin{matrix}.
This would lead to two nested overlays being placed. With this
commit, only the outer one will remain.
A `save-excursion' around a call to org-table-align make point end up
*before* the table. The reason is that a table align replaces the
entire table, including the newline before it. When the table is
removed in order to be replaced, the marker created by
`save-excursion' slips. `org-table-align' has it's own, built-in
`save-excursion' by remembering the line and column where the cursor
was before the align.
However, if you are using arguments, it is required that the opening
parenthesis is attached to the macro name, and that the closing
parenthesis is attached to the three closing braces.
New variable `org-agenda-skip-scheduled-if-deadline-is-shown' to avoid
that a entry shows up in the agenda for today for both a scheduling
and a deadline entry. See the docstring of the variables for more
details.
Leo writes:
> Hi there,
>
> ,----[ (info "(org)Structure editing") ]
> | `C-<RET>'
> | Just like `M-<RET>', except when adding a new heading below the
> | current heading, the new heading is placed after the body instead
> | of before it. This command works from anywhere in the entry.
> `----
>
> Inside a substree and with the point at the beginning of a line, C-RET
> turns the current line into a heading. In the following example, ><
> indicates where the point is.
>
> ----------------
> * Sample
> < This is not a heading
> ----------------
>
> After C-RET, it changes to
> ----------------
> * Sample
> * This is not a heading
> ----------------
>
> I can reproduce this with org 6.29c as included in Emacs. Can someone
> else reproduce this bug?
Dan Griswold writes:
> Hi there,
>
> Well, I think this a bug.
>
> Given this org input file:
>
> ,----
> | * Things
> | ** A Heading
> | - some
> | - stuff
> | - in
> | - a
> | - list
> | ** Another heading
> | - another
> | - list
> `----
>
> then if I select the level one heading (titled "Things")
> with C-c @, and export to LaTeX using C-c C-e l, I get this
> output:
>
> ,----
> | % Created 2009-07-29 Wed 20:24
> | \documentclass[12pt]{article}
> | \usepackage[utf8]{inputenc}
> | \usepackage[T1]{fontenc}
> | \usepackage{graphicx}
> | \usepackage{longtable}
> | \usepackage{hyperref}
> |
> |
> | \title{Things}
> | \author{Daniel M. Griswold}
> | \date{July 29, 2009}
> |
> | \begin{document}
> |
> | \maketitle
> |
> | ** A Heading
> | \begin{itemize}
> | \item some
> | \item stuff
> | \item in
> | \item a
> | \item list
> | \end{itemize}
> | ** Another heading
> | \begin{itemize}
> | \item another
> | \item list
> | \end{itemize}
> |
> | \end{document}
> `----
>
> Note that the top level headings ("A Heading" and "Another
> Heading") are not exported as \section, but with the
> asterisks they have in the org file:
>
> ,----
> | ** A Heading
> | \begin{itemize}
> |
> | ... snip ...
> |
> | \end{itemize}
> | ** Another heading
> `----
>
> Exporting the whole file does what it's supposed to do:
> export the headlines as \section and \subsection.
This commit fixes the issue.
Bernt Hansen writes:
> Every so often I run into a situation where bulk refiling
> doesn't work anymore.
>
> I currently have 15 items in my refile.org file that I want
> to refile to other locations. I marked a few of them and
> bulk refiled them just fine. Then I marked a few more and B
> r fails with "Cannot find entry for marker #<marker at
> 297156 in norang.org>"
>
> I think this happens when I mark multiple tasks in the same
> subtree (i.e. the parent and a sibling) and refile both to
> the same location. After that it gets confused.
>
> If I have a task like this in refile.org
>
> #+FILETAGS: REFILE
> * Test
> ** Test 2
>
> and run a tags match on REFILE I see both tasks. Mark both
> with m in the agenda and B r to some other location. It
> refiles the first (and this moves the sibling too) and then
> it's broken after that.
>
> I get the following backtrace
>
> Debugger entered--Lisp error: (error "Cannot find entry for
> marker #<marker at 297156 in norang.org>")
Indeed the happens because, when a parent gets refiled or
achieved, any entries corresponding to its children are
removed from the agenda.
We address this issue by
- sorting the markers, to make sure parents will be handled
before children
- No longer throwing an error when a bulk action entry no
longer is present in the agenda - most likely it was taken
care of together with its parent.
Gregory Grubbs writes:
> When exporting a table with ido-mode active, an error is
> raised in org-ido-completing-read. I think
> ido-completing-read is being called with incorrect
> arguments, but the fix is beyond me.
>
> Steps to reproduce the error:
> Org-mode version: 6.28trans
> Emacs version: GNU Emacs 23.0.91.1 (i486-pc-linux-gnu, GTK+ Version
> 2.16.0) of 2009-04-05 on palmer, modified by Debian
>
>
> Turn on ido-mode: M-x ido-mode RET
> visit a file using C-x C-f /tmp/test.org RET
> Create a simple table:
> |column a|column b|
> |-
> |one|two|
> |three|four|
>
> Org-magic-tabelize it by hitting TAB somewhere in a column
>
> M-x org-table-export RET /tmp/test.csv
>
> Here's the backtrace I get:
>
> Debugger entered--Lisp error: (wrong-type-argument listp "orgtbl-to-tsv")
This error is due to the fact that org-ido-completing-read does
convert alists to flat lists for completion. Now we check if the list
really is an alist before converting it.
Carsten Dominik
Eric Schulte
John Wiegley
James TD Smith
Dan Davison
Bastien Guerry