* lisp/org.el (org-set-autofill-regexps): use `org-item-re' in
`paragraph-start' to recognize alphabetical lists.
(org-fill-paragraph): enforce a pre-computed fill-prefix before
calling fill-paragraph when point in in an item. Also prevent
paragraphs getting merged into an adjacent list upon filling.
(org-adaptive-fill-function): make sure to determine real fill-prefix
for auto-fill.
(org-auto-fill-function): use a pre-computed fill-prefix before
calling do-auto-fill.
* lisp/org-list.el (org-list-item-body-column): new function
* lisp/org-inlinetask.el (org-inlinetask-at-task-p,
org-inlinetask-toggle-visibility): new functions.
* lisp/org-list.el (org-list-set-item-visibility): new function.
* lisp/org.el (org-cycle, org-cycle-internal-local): separate lists
and inline tasks from headlines.
(org-outline-level): do not consider lists as headlines.
Cycling visibility is using different tools.
* lisp/org-list.el (org-list-struct): mark items less indented than
top item of the list, so that they will be modified.
(org-list-struct-apply-struct): compare struct's indentation with
line's indentation instead of old-struct's. This is needed because
`org-list-struct' automatically fixes indentation so changes might not
be seen otherwise.
* lisp/org.el (org-ctrl-c-ctrl-c): small refactoring.
* lisp/org-list.el (org-update-checkbox-count): when a part of the
buffer is processed to count checkboxes, lists are read from top to
bottom, but inside lists (in drawers, blocks, or inline tasks) are
skipped. Thus, cookies cannot be updated. This patch enforces
reading of such lists if counter is itself in a special context.
* lisp/org-list.el (org-list-struct-apply-struct): inline tasks along
with their content must stay at column 0 even if the item is gaining
indentation. Moreover, fix indentation of text in an inline task,
now it can be in such a task within a list.
* lisp/org-list.el (org-at-item-p): also verify context is valid.
Otherwise it would recognize valid items where org-in-item-p
wouldn't.
(org-in-item-p, org-list-struct-apply-struct): use shorter version of
org-at-item-p.
(org-cycle-list-bullet): fix typo.
(org-list-parse-list): avoid calling org-at-item-p two times by using
an appropriate regexp
* lisp/org.el (org-indent-line-function): use an appropriate regexp
instead of calling org-at-item-p two times.
* lisp/org-list.el (org-in-item-p): When point was just after
org-list-end-re, check wouldn't be done for starting line. So, if
the first line was an item, it wouln't be noticed and function would
return nil. Simplify and comment code.
* lisp/org.el (org-toggle-item): when used on normal text, ensure
every line in region is included in the new item, regardless of its
original indentation.
* lisp/org-list.el (org-list-struct-apply-struct): if end of list was
at eol, for example, with list inside a block, the last list
wouldn't be shifted. Thus, the patch ensures no blank lines is
skipped.
* lisp/org.el (org-toggle-item): Now accepts a prefix argument. When
used without argument on normal text, it will make the whole region
one item. With an argument, it defaults to old behavior: change each
line in region into an item.
* lisp/org.el (org-return): when called from inside an item with the
indent flag, function should keep text moved inside the item. This
allows to use C-j to separate lines in an item: cursor won't go back
to column 0.
* lisp/org-list.el (org-list-struct): when a line has org-example
property, skip the entire block. This is needed during export, for
example when src blocks in org markup contain lists, and are
returned verbatim because org isn't in the list of interpreted
languages.
* lisp/org-list.el (org-list-insert-item-generic): change arguments.
The function now accepts structure and previous items alist. This
allow to insert an item programmatically more easily.
(org-insert-item): Apply changes to org-list-insert-item-generic. The
function now takes care about repairing structure and updating
checkboxes.
* lisp/org-timer.el (org-timer-item): Apply changes to
org-list-insert-item-generic. The function now takes care about
repairing structure.
* lisp/org-list.el (org-list-make-subtree): function now uses
org-list-parse-list mechanism.
(org-list-make-subtrees): removed function.
(org-list-to-generic): added a parameter and every parameter can be a
sexp returning a string, for finer control.
(org-list-to-html, org-list-to-latex, org-list-to-texinfo): slight
modifications to apply changes to org-list-to-generic.
(org-list-to-subtree): new function.
* lisp/org-docbook.el (org-export-docbook-list-line): even with
alphabetical lists, Org shouldn't enforce a particular list type to
exporters. This is a job for style files.
* lisp/org-html.el (org-html-export-list-line): ib idem.
* lisp/org-list.el (org-at-item-counter-p): new function.
(org-list-parse-list): handle counters and list depth.
(org-list-to-generic): a special string is used when an item has a
counter.
(org-list-to-latex): use new special string for counters. This fixes
the counter bug in LaTeX export, as the enumi counter was the only one
modified.
* lisp/org-latex.el (org-export-latex-lists): use new
`org-list-parse-list' output.
* lisp/org-list.el (org-list-get-list-type): new function.
(org-list-parse-list): use new function.
* lisp/org-html.el (org-html-export-list-line): use new function.
* lisp/org-docbook.el (org-export-docbook-list-line): use new function.
* lisp/org-list.el (org-alphabetical-lists): new variable
(org-item-re, org-list-full-item, org-cycle-list-bullet,
org-list-struct-fix-bul, org-list-inc-bullet-maybe): reflect
introduction of the new variable.
(org-item-beginning-re): changed into a function, so any modification
of `org-alphabetical-lists' will not require reloading Org.
(org-at-item-p, org-toggle-checkbox, org-update-checkbox-count,
org-list-parse-list, org-list-send-list): reflect changes to
`org-item-beginning-re'.
(org-list-use-alpha-bul-p): new function.
* lisp/org.el (org-check-for-hidden): reflect changes to
`org-item-beginning-re'.
* lisp/org-capture.el (org-capture-place-item): reflect changes to
`org-item-beginning-re'.
* lisp/org-docbook.el (org-export-docbook-list-line): handle new type
of items.
* lisp/org-exp.el (org-export-mark-list-end,
org-export-mark-list-properties): reflect changes to
`org-item-beginning-re'.
* lisp/org-html.el (org-html-export-list-line): handle new type of
items.
* lisp/org-latex.el (org-export-latex-lists): handle new type of items
and reflect changes to `org-item-beginning-re'.
* lisp/org-ascii.el (org-export-ascii-preprocess): handle new counters.
Modified from a patch by Nathaniel Flath.
* lisp/org-list.el (org-list-end-re): removed function and made it a
variable. There's no need for the overhead of calling the function
every at every line in a list. User will have to reload Org if he
change value of either `org-list-end-regexp' or
`org-empty-line-terminates-plain-lists'.
(org-in-item-p,org-list-struct,org-list-parse-list): apply change.
* lisp/org-exp.el (org-export-mark-list-end,
org-export-mark-list-properties): apply change
* lisp/org-latex.el (org-export-latex-lists): apply change. Also
prevent items with org-example property to be considered as real
items.
When the function needs to know if cursor is in a plain list and move
to item beginning if it is the case, a fast way is to ignore errors on
(goto-char (org-in-item-p)).
* lisp/org-inlinetask.el (org-inlinetask-export-templates): slightly
modify templates so environment boundaries don't interfere with
content of task. Unprotect content of task so it might benefit from
further transformations. Set original-indentation property to a high
value to ensure that task is always in the last item of the list.
Also, apply templates later in export process.
* lisp/org-list.el (org-list-struct): fix inline task skipping.
* lisp/org-latex.el (org-export-latex-lists): Search for unprotected
items only, and redefine `org-at-item'. This change is required when
verbatim lists are inserted during export, usually by Babel.
* lisp/ob.el (org-babel-result-end): end position is end of current
sublist instead of bottom point, as results might be inserted in a
list themselves.
* lisp/org-list.el (org-list-automatic-rules): removed insert rule.
(org-list-insert-item-generic): removed code preventing user to insert
another item in a block within a list. It is because new list context
make it impossible to see if a point in a block is also in a list.
* lisp/org-exp.el (org-export-preprocess-string): mark list endings
before babel blocks preprocessing starts, so blank lines that may be
inserted do not break list's structure. Then, mark list with special
properties required by exporters. Thus output from babel can easily
be included in lists.
(org-export-mark-list-end): new function
(org-export-mark-list-properties): new function
(org-export-mark-lists): removed function. It was split into the two
preceding functions.
* lisp/org-list.el (org-update-checkbox-count): do not recompute every
list before next heading when there are more than one cookie in an
headline. Moreover, ignore the case where cookie is inserted neither
at an heading nor at an item.
* lisp/org-list.el (org-sort-list): fix number of arguments to
`org-list-repair', plus make end-record go to end of item before any
blank line to keep them from being swallowed in the sorting.
* lisp/org-list.el (org-list-forbidden-blocks): variable renamed from
org-list-blocks.
(org-list-export-context): new variable
* list/org-exp.el (org-export-mark-lists): use new variable.
* list/org-latex.el (org-export-latex-lists): use new variable
* lisp/org-list.el (org-list-search-generic): renamed form
org-search-unenclosed-generic to reflect now behavior. Now, match
can only be in a valid context for lists, as determined by
`org-list-context'.
(org-list-search-backward): renamed from
org-search-backward-unenclosed.
(org-list-search-forward): renamed from org-search-forward-unenclosed.
(org-toggle-checkbox,org-update-checkbox-count): use new functions.
(org-sort-list): using default regexp search functions as context is
not required in this case.
* lisp/org-ascii.el (org-export-ascii-preprocess): use new function
* lisp/org-capture.el (org-capture-place-item): use new function
* lisp/org-exp.el (org-export-mark-lists): new function, replacing
org-export-mark-list-ending. It adds information as text properties
to every list, before changes done by exporter destruct them.
* lisp/org-html.el (org-export-as-html): delegate list handling to
external function org-html-export-list-line.
(org-html-export-list-line): new function.
* lisp/org-latex.el (org-export-latex-lists): small modification.
* lisp/org-list.el (org-list-get-first-item): new alias for
org-list-get-list-begin
(org-list-get-last-item): new function
(org-list-get-list-end): use org-list-get-last-item
* lisp/org.el (org-get-string-indentation): moved in generally useful
functions section, as it wasn't specific to plain lists and that no
code was using it in org-list.el.
* lisp/org.el (org-skip-over-state-notes,org-store-log-note): use new
accessors.
* list/ob.el (org-babel-result-end): use new accessors.
* list/org-exp.el (org-export-mark-list-ending): use new accessors.
* list/org-list.el (org-list-indent-item-generic): remove error
messages happening before process. This belongs to interactive
functions.
(org-indent-item,org-indent-item-tree,
org-outdent-item,org-outdent-item-tree): ensure point or region is
correct before computing list structure. Return an error message
otherwise.
* lisp/org-list.el (org-apply-on-list): use new structures. Function
is now applied in reverse order so modifications do not change
positions of items in buffer.
* org-list.el (org-list-parse-list): rewrite of function to allow text
following a sub-list in the same item. See docstring for an example
of output.
(org-list-to-generic): use new parsing function.
(org-list-to-latex,org-list-to-html): minor change for clearer export.
* org-list.el (org-list-has-child-p): renamed from org-list-get-child.
Returning first child is only useful as a predicate, as we're
allowing an item to have more than one sub-list.
(org-list-indent-item-generic): use `org-list-has-child-p' instead of
org-list-get-child.
(org-in-item-p): also return item beginning when list starts at
context beginning.
(org-list-get-parent): use of `org-list-struct-parent-alist' helper
function is not optional anymore.
(org-list-get-all-items): shorten code with the help of cl.el.
(org-list-get-children): now returns all children of item, even if
they do not belong to the same list. Renamed from
org-list-get-all-children.
(org-list-get-list-begin): function wasn't return value when item was
already the first item of the list at point.
(org-list-get-list-end): function wasn't return value when item was
already the last item of the list at point.
(org-list-struct-fix-box,org-update-checkbox-count): now uses
`org-list-get-children'.
* org.el (org-indent-line-function): Indentation of item's body starts
just after the bullet, not after a checkbox. Moreover, As
`org-in-item-p' also returns item beginning position when point is
in a list, do not compute it a second time.
* org.el (org-ctrl-c-ctrl-c): when called at a list item, replace
usage `org-repair-list', forcing another reading of the list, with
only needed subroutines.
* org-list.el (org-list-separating-blank-lines-number): use new
accessors.
(org-list-insert-item-generic): use list structures to insert a new
item.
(org-list-exchange-items): refactor and comment code. Now return new
struct instead of modifying it, as list sorting would sometimes eat
first item.
(org-move-item-down,org-move-item-up): reflect changes to
`org-list-exchange-items'.
(org-insert-item): as `org-in-item-p' also computes item beginning
when applicable, reuse the result.
* org-timer.el (org-timer-item): as `org-in-item-p' also computes item
beginning when applicable, reuse the result.
* lisp/org-list.el (org-list-in-item-p): unify methods for this predicate.
(org-list-in-item-p-with-indent): removed function
(org-list-ending-between): removed function
(org-list-maybe-skip-block): removed function
(org-list-in-item-p-with-regexp): removed function
(org-list-top-point-with-regexp): removed function
(org-list-top-point-with-indent): removed function
(org-list-bottom-point-with-indent): removed function
(org-list-bottom-point-with-regexp): removed function
(org-list-get-item-same-level): removed function
(org-list-top-point): removed function
(org-list-bottom-point): removed function
(org-get-item-beginning): renamed to org-list-get-item-begin to be
consistent with naming policy of non-interactive functions.
(org-get-beginning-of-list): removed function
(org-beginning-of-item-list): use new accessors
(org-get-end-of-list): removed function
(org-end-of-list): use new accessors
(org-get-end-of-item): removed function
(org-end-of-item): use new accessors
(org-get-previous-item): removed function
(org-previous-item): use new accessors
(org-get-next-item): removed function
(org-next-item): use new accessors
(org-end-of-item-before-blank): renamed to
(org-list-get-item-end-before-blank): Use new accessors.
* org-list.el (org-list-repair): removed optional argument
FORCE-BULLET. The job of this interactive function is to completely
fix a list at point. Changing bullets is a separate task. Also
removed others optional arguments TOP and BOTTOM to follow the new
structures.
(org-list-indent-item-generic): remove need for TOP and BOTTOM. STRUCT
is a new required argument. This avoids computing a list structure
many times when function is called more than once in a row, for
example in org-cycle-item-indentation. Use new accessors. Now, also
call `org-update-checkbox-count-maybe'.
(org-outdent-item,org-indent-item,org-outdent-item-tree,org-indent-item-tree):
remove need for TOP and BOTTOM.
(org-list-insert-item-generic): reflect changes to `org-list-repair'.
(org-list-exchange-items): use new accessors. Now modify struct to
avoid re-reading it later.
(org-move-item-down): reflect changes to `org-list-repair'. Use new
accessors.
(org-move-item-up): reflect changes to `org-list-repair'. Use new
accessors.
(org-cycle-list-bullet): use new structures. Also use a shortcut to
`org-list-struct-fix-struct' in order to avoid unnecessary fixes, like
`org-list-struct-fix-box'
(org-sort-list): use of new structures. Renamed an internal function
for a little more clarity.
(org-cycle-item-indentation): remove dependency on org-list-repair.
Use new accessors.
(org-list-get-child): correct bug when asking for the child of the
last item
(org-list-exchange-items): use new accessors.
* lisp/org-list.el (org-list-blocks): new variable
(org-list-context): new function
(org-list-full-item-re): new variable
(org-list-struct-assoc-at-point): use new varible
(org-list-struct): rewrite of function. Now, list data is collected by
looking at the list line after line. It reads the whole list each time
because reading only a subtree was not enough for some operations,
like fixing checkboxes. It also removes the need to get
`org-list-top-point' and `org-list-bottom-point' first. An added data
is the position of item ending. This aims to be able to have list
followed by text inside an item.
(org-list-struct-assoc-end): new function
(org-list-struct-parent-alist): new function
(org-list-get-parent): new function
(org-list-get-child): new function
(org-list-get-next-item): new function
(org-list-get-prev-item): new function
(org-list-get-subtree): use helper function `org-list-struct-prev-alist'.
(org-list-get-all-items): new function
(org-list-get-all-children): new function
(org-list-get-top-point): new function
(org-list-get-bottom-point): new function
(org-list-get-counter): new function
(org-list-get-item-end): new function
(org-list-struct-fix-bul): rewrite for cleaner code. Make use of new
accessors.
(org-list-struct-fix-ind): make use of new accessors.
(org-list-struct-fix-box): new function
(org-list-struct-fix-checkboxes): removed function
(org-list-struct-outdent): use new accessors. Use the fact that there
is no longer a virtual item at beginning of structure.
(org-list-struct-indent): use helper functions
`org-list-struct-prev-alist' and `org-list-struct-parent-alist'. Also
use new accessors.
(org-list-struct-fix-struct): comment function. Call directly
`org-list-struct-apply-struct', without removing unchanged items
first.
(org-list-struct-apply-struct): comment function. Rewrite using new
accessors. Use new variable `org-list-full-item-re'.
(org-list-shift-item-indentation): removed function, now included in
`org-list-struct-apply-struct' because it is too specific.
Conflicts:
lisp/org-list.el
org-list: new way to get structure of a list and new accessors
* lisp/org-list.el (org-list-blocks): new variable
(org-list-context): new function
(org-list-full-item-re): new variable
(org-list-struct-assoc-at-point): use new varible
(org-list-struct): rewrite of function. Now, list data is collected by
looking at the list line after line. It reads the whole list each time
because reading only a subtree was not enough for some operations,
like fixing checkboxes. It also removes the need to get
`org-list-top-point' and `org-list-bottom-point' first. An added data
is the position of item ending. This aims to be able to have list
followed by text inside an item.
(org-list-struct-assoc-end): new function
(org-list-struct-parent-alist): new function
(org-list-get-parent): new function
(org-list-get-child): new function
(org-list-get-next-item): new function
(org-list-get-prev-item): new function
(org-list-get-subtree): use helper function `org-list-struct-prev-alist'.
(org-list-get-all-items): new function
(org-list-get-all-children): new function
(org-list-get-counter): new function
(org-list-get-item-end): new function
(org-list-struct-fix-bul): rewrite for cleaner code. Make use of new
accessors.
(org-list-struct-fix-ind): make use of new accessors.
(org-list-struct-fix-box): new function
(org-list-struct-fix-checkboxes): removed function
(org-list-struct-outdent): use new accessors. Use the fact that there
is no longer a virtual item at beginning of structure.
(org-list-struct-indent): use helper functions
`org-list-struct-prev-alist' and `org-list-struct-parent-alist'. Also
use new accessors.
(org-list-struct-fix-struct): comment function. Call directly
`org-list-struct-apply-struct', without removing unchanged items
first.
(org-list-struct-apply-struct): comment function. Rewrite using new
accessors. Use new variable `org-list-full-item-re'.
(org-list-shift-item-indentation): removed function, now included in
`org-list-struct-apply-struct' because it is too specific.
Conflicts:
lisp/org-list.el
* lisp/org-list.el (org-list-get-all-items): new function
(org-list-get-all-children): new function
(org-list-get-nth): new function
(org-list-set-nth): new function
(org-list-get-ind): new function
(org-list-set-ind): new function
(org-list-get-bullet): new function
(org-list-set-bullet): new function
(org-list-get-checkbox): new function
(org-list-set-checkbox): new function
(org-list-struct-fix-bul): use new accessors
(org-list-repair): use new accessors
(org-list-indent-item-generic): make use of accessors
(org-list-get-parent): renamed from org-list-struct-get-parent
(org-list-get-child): renamed from org-list-struct-get-child
(org-list-struct-fix-ind): make use of accessors
(org-list-get-next-item): new function
(org-list-get-subtree): new function
* lisp/org-list.el (org-list-struct-assoc-at-point): add checkbox to
list structure
* lisp/org-list.el (org-list-struct-assoc-at-point): add checkbox as
value in structure
* lisp/org-list.el (org-list-struct-apply-struct): also apply checkboxes
* org-protocol.el (org-protocol-unhex-single-byte-sequence)
(org-protocol-unhex-string, org-protocol-unhex-compound): Change date
of obsolete declaration to 2011-02-17.
* org.el (org-link-unescape): Simpler algorithm for replacing percent
escapes.
(org-link-unescape-compound): Use cond statements instead of nested
if, convert hex string with string-to-number, save match data.
(org-link-unescape-single-byte-sequence): Use mapconcat and
string-to-number for unescaping single byte sequence.
* org-protocol.el (org-protocol-unhex-string)
(org-protocol-unhex-compound)
(org-protocol-unhex-single-byte-sequence): Declare obsolete and
alias to respective org-link-unescape-* functions.
* org-macs.el (org-char-to-string): Inline function to properly decode
utf8 characters in Emacs 22. Moved and renamed from org-protocol.el.
* org-protocol.el (org-protocol-unhex-compound): Use renamed inline
function.
* org.el (org-link-escape-chars, org-link-escape-chars-browser): New
format of percent escape table.
(org-link-escape): Use new table format.
Just a plain list with the chars that should be escaped.
* org-protocol.el (org-protocol-unhex-single-byte-sequence): New
function. Decode hex-encoded singly byte sequences.
(org-protocol-unhex-compound): Use new function if decoding sequence
as unicode character failed.
* org-publish.el (org-publish-cache-ctime-of-src): improve
docstring.
(org-publish-find-title): New option to explicitly reset the
title in the cache.
(org-publish-format-file-entry): Use this new option.
Thanks to Jonathan Bisson for reporting this.
* org-exp.el (org-export-preprocess-string): Set the source
buffer and use `org-clone-local-variables' to get local
variables from it.
* org.el (org-clone-local-variables): New function.
* lisp/org-exp.el (org-export-format-source-code-or-example):
Allow empty string as second element in minted/listings options
Both
(setq org-export-latex-minted-options
'(("frame" "lines")
("fontsize" "\\scriptsize")
("linenos" "")))
and
(setq org-export-latex-minted-options
'(("frame" "lines")
("fontsize" "\\scriptsize")
("linenos")))
will result in latex like
\begin{minted}[frame=lines,fontsize=\scriptsize,linenos]{common-lisp}
Three new user-customizable variables:
org-export-latex-listings-options (default nil)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Association list of options for the latex listings package.
These options are supplied as a comma-separated list to the
\\lstset command. Each element of the association list should be
a list containing two strings: the name of the option, and the
value. For example,
(setq org-export-latex-listings-options
'((\"basicstyle\" \"\\small\")
(\"keywordstyle\" \"\\color{black}\\bfseries\\underbar\")))
will typeset the code in a small size font with underlined, bold
black keywords.
Note that the same options will be applied to blocks of all
languages.
See ftp://ftp.tex.ac.uk/tex-archive/macros/latex/contrib/listings/listings.pdf
customization group: org-export-latex
org-export-latex-minted-options (default nil)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Association list of options for the latex minted package.
These options are supplied within square brackets in
\\begin{minted} environments. Each element of the alist should be
a list containing two strings: the name of the option, and the
value. For example,
(setq org-export-latex-minted-options
'((\"bgcolor\" \"bg\") (\"frame\" \"lines\")))
will result in src blocks being exported with
\\begin{minted}[bgcolor=bg,frame=lines]{<LANG>}
as the start of the minted environment. Note that the same
options will be applied to blocks of all languages."
customization group: org-export-latex
See minted.googlecode.com/files/minted.pdf
org-export-latex-custom-lang-environments (default nil)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Association list mapping languages to language-specific latex
environments used during export of src blocks by the listings
and minted latex packages. For example,
(setq org-export-latex-custom-lang-environments
'((python \"pythoncode\")))
* lisp/org-exp.el (org-export-format-source-code-or-example):
Support new user-customizable options
(org-export-latex-custom-lang-environments): Ensure new variable is defined
(org-export-latex-listings-options): Ensure new variable is defined
(org-export-latex-minted-options): Ensure new variable is defined
* lisp/org-latex.el (org-export-latex-listings-options): New variable
(org-export-latex-minted-options): New variable
(org-export-latex-custom-lang-environments): New variable
* org-html.el (org-export-as-html): handle the case when
`org-export-html-validation-link' is nil to keep backward
compatible with the old default value of this variable.
Thanks to Sébastien Vauban for spotting this.
Nicolas Goaziou
Bastien Guerry
David Maus
Sebastian Rose
Dan Davison