Mapping call a function for each matching entry. So far this has
always assumed that the entry stays in the buffer and search can
continue from there. However, when the mapper function removes the
tree, more control is needed to specify from where the search should
continue.
The action function handed to the mapping function can now set the
variable `org-map-continue-from' to the position from where mapping
should continue.
During secondary agenda filtering, pressing "?" now will install a
filter that selects entries which do not have an effort defined.
This new model was necessary because we needed to stop interpreting
entries with no effort defines as 0 effort. This was inconsistent,
because for normal agenda sorting, the treatment of these entries
depends on the variable `org-sort-agenda-noeffort-is-high'. Now this
variable is also respected during filtering.
RefTeX can now be used to create a citation in Org-mode buffers.
Setup the buffer with #+BIBLIOGRAPHY: bibbase style
and create citations with `C-c C-x ['.
The new variable `org-agenda-cmp-user-defined' can contain a function
to test how two entries should be compared during sorting.
user-defined-up and user-defined-down can then be part of any sorting
strategy.
This commit implements an important change: When, during a
stuck-project search, a project tree is identified as not stuck, so
far the search would continue after the end of the project tree. From
now on, the search continues in the subtree, so that stuck subprojects
can still be identified.
> Feature Request: that the pdf saved automatically from agenda be
> immediately displayed
> The saving of a pdf is a really nice feature. I had hacked
> org-agenda, I think, to automatically do this. However, it would
> be nicer if immediate display were optional. I don't know
> whether \C-u makes sense as a prefix to saving a file with \C-x
> \C-w. Perhaps not.
Why not, C-c C-x C-w is a fine idea for this. It should now work.
Anupam Sengupta writes:
> I routinely use time ranges (and occasionally time-stamp ranges)
> in my org files to document the scheduled block of time for a
> meeting or activity. As an example, I will mark meetings as:
>
> * A Meeting
> <2009-03-12 Thu 10:00-11:00>
>
> As often happens with meetings, rescheduling needs to be done and
> I use S-<up> or S-<down> on the time-stamp to make the
> modifications. While this works fine, it usually leads to a
> duplication when the *time* part of the time-stamp needs to be
> changed.
>
> For the same example above, if the time-block has now changed to
> 11:00-12:00, then I need to do S-<up> on both the "10:00" and the
> "11:00" string. I.e,
>
>
> * A Meeting
> <2009-03-12 Thu 11:00-11:00>
> ^
> +---------------- After the first S-<up>
>
> * A Meeting
> <2009-03-12 Thu 11:00-12:00>
> ^
> +---------------- After the second S-<up>
>
> Can we have a feature (with a toggle option perhaps) which would
> *move* the block (i.e., both time entries) by the same amount
> when either one is moved in the same direction. I.e., the
> proposal is to have:
>
> * A Meeting
> <2009-03-12 Thu 11:00-12:00>
> ^ ^
> | |
> | +---------- Automatically shifted
> +---------------- After the S-<up>
This is in fact how changing time works in many applications, and
it does make sense here as well. The commits implements this
change.
It also implements a way to change the start time of an entry from
the agenda. The date is normally changed with S-right/left.
Now, if you add a C-u prefix, the hour will be changed. If you
immediately press S-right/left again, hours will continue to be
changed.
A double prefix will do the same for minutes.
Installation of info files works differently in Debian. There is now
a new Makefile target `install-info-debian' to handle this, and this
fact is mentioned in the manual as well.
Undo will now remove up to 20 characters typed consecutively, just
like Emacs normally does. We need a special implementation for this
because Org has its own self-insert command.
The code for doing this is a patch by Martin Pohlack.
A line: #+MARCO: name replacement text
can be referenced by {{{name}}}. As special cases, {{{title}}} will
reference #+TITLE, and similar with similar lines.
orgstruct++-mode is an enhanced version of orgstruct mode that
also imports all indentation and paragraph settings into the major
mode. Furthermore, it now allows to use M-RET and M-S-RET in items
after the first line. The latter change was a request by Austin
Frank.
The new command `org-reload' allows to reload all Org lisp files.
By default it will load compiled files if these are available. If
not, or when called with a C-u prefix argument, uncompiled code will
be loaded. This is good for producing a meaningful backtrace when an
error occurs.
Like TODO keywords before, now also tags each get their own CSS class,
given by the tag itself. Invalid characters in tags are all replaced
by "_" to make sure the resulting HTML remains valid.
Two new variables can be used to add a prefix to the class names for
TODO keywords and tags.
This commit makes it possible to force new lines and even empty lines
in the fast tag selection interface, either by splitting tags
definition into several lines, or by inserting "\n" into the tags
list, or by inserting (:newline) into the tags alist.
This is largely a patch from Christopher Suckling
The variables `org-agenda-todo-ignore-deadlines' and
`org-agenda-todo-ignore-with-date, and
`org-agenda-tags-todo-honor-ignore-options' are now all mentioned in
the docs.
Selecting files for publishing was strictly based on extension.
Richard Klinda provided this patch to allow the symbol `any' as an
indicator to actually take all files in a directory.
Wanrong Lin writes:
2. Can we put all of those state change history logging messages
into a drawer like "STATE-HIST" (when the drawer is defined in
org-drawers), so it is less intrusive in the file?
Yes we can. This commit provides this functionality. It introduces a
new drawer, LOGBOOK. When the variable
`org-log-state-notes-into-drawer' is set, state change time stamps and
notes will go into this drawer, or another one specified by that
variable.
Wanrong Lin writes:
Right now in the HTML export the TODO keywords have either
class="todo", or class="done". That loses all the face properties
in the original TODO keywords. I think the TODO keywords faces are
important visual aids to differentiate different types of TODO
items, so I just wonder whether it is possible to keep the faces
in the HTML.
This makes sense. This commit adds, to each TODO keyword, an
additional class named after the keyword. For example:
<span class="todo WAITING">WAITING</span>
So each todo keyword gets class "todo" or "done" depending on which
general type it is. And in addition it gets itself as class.
So go to your CSS file and configure like this:
.todo { font-weight:bold; }
.done { font-weight:bold; }
.TODO { color:red; }
.WAITING { color:orange; }
.DONE { color:green; }
Thanks to Sebastian Rose for the multiple-classes trick.
David Lord writes:
I can see that org-clock-persistence-insinuate appeared in 6.11
but I can't find it in the manual. Does it need to be added?
Yes, right.
Turns out a number of people set their variables too late so that
activating dependencies does not work correctly. We now double-check
in the mode hook that everything is in order.....
This commit adds a key (`C-c C-x o') to toggle the ORDERED property of
a tree. And it adds menu entries for doing this, which also reflect
the current state of the tree.
I have changed my mind and turned off shift-selection support again by
default, because it causes confusing behavior, sometimes calling an Org
command and sometimes doing shift selection. The default behavior is
now:
- in special contexts, execute Org commands
- outside special contexts, create an error that will point users to
configure the variable `org-support-shift-select'. Hopefully that
will make them read the docstring and then decide for themselves
what to do.
Emacs 23 introduces `shift-selection-mode', and even turns it on by
default. Therefore, it is fair to assume that users of Emacs 23 will
expect to be able to select a region by holding down shift will moving
the cursor. This conflicts with the use of shifted cursor keys in
Org-mode for other purposes, in particular to "change the item under
the cursor", like it is done for time stamps, item bullet types, TODO
keywords and priorities.
This commit tries to support `shift-selection-mode' as much as possible,
while retaining these valuable commands keys for Org-mode. The
following things are changed:
1. The range of contexts where Org's commands do act is reduced.
- S-up and S-down no longer jump to the previous and next plain list
item - you can use the paragraph commands C-up and C-down for this
quite well.
- S-left and S-right only change the bullet type of a plain list
item when the cursor is *exactly* on the bullet, not just anywhere
in the item line.
2. When a S-cursor key is used outside a special context, a region is
started or extended.
3. When a region has already been started, it will be continue to
extend even if the S-cursor keys move the cursor into a special
context.
4. If you want S-cursor selection to work in headlines as well, you
can set the variable `org-support-shift-select' to
`even-in-headlines'. Then you need to rely on `C-c C-t' to set
TODO keywords, and on `C-c ,' to set priorities.
If you want everything to behave the way it was, set
`org-support-shift-select' to nil.
Formulas can now refer to fields and regions in other tables, be it in
the same file or even in different files.
This also opens the door for more interesting R support, because
arbitrary tables in a file can now be accessed with appropriate
commands.
Finally, this commit also introduces a convenience for creating
references in tables. For the purpose of references, it will always
be *assumed* that there is another hline at the end if each table. So
for example in a table that has only a single hline, to separate
header from data, you can now access all of column two with
"@I$2..@II$2".
The conversion commands `C-c -' and `C-c *' are now better
behaved and therefore more useful, I hope.
If there is an active region, these commands will act on the
region, otherwise on the current line.
- C-c - :: This command turns headings or normal lines into
items, or items into normal lines. When there is a
region, everything depends on the first line of the
region:
- if it is a item, turn all items in the region into
normal lines.
- if it is a headline, turn all headlines in the region
into items.
- if it is a normal line, turn all lines into items.
- special case: if there is no active region and the
current line is an item, cycle the bullet type of the
current list.
- C-c * :: This command turns items and normal lines into
headings, or headings into normal lines. When there is
a region, everything depends on the first line of the
region:
- if it is a item, turn all items in the region into
headlines.
- if it is a headline, turn all headlines in the region
into normal lines.
- if it is a normal line, turn all lines into headlines.
The directory used for attachments to an entry is by default chosen
automatically, with a name derived from the entry ID to make sure it
is unique.
However, in some cases it may be better to assign a user-chosen
directory to and entry, to be used for attachments. This commits
implements this change. See the documentation changes for information
on how things work.
Thanks to Jason Jackson for pushing this part.
The second change made bu this commit is that it is now possible to
inherit the attachment directory from a parent, so that an entire
project subtree can use a single directory.
Two new variables, `org-export-html-inline-image-extensions' and
`org-export-latex-inline-image-extensions' now define the file
extensions that will be considered for inlining images. The default
for HTML is png, jpg, jpeg, and gif files. The default for LaTeX is
png, jpg, jpeg, and pdf, assuming processing with `pdflatex'.
For LaTeX export, this can lead to conflicts for links that point
to non-image PDF files. To avoid that such a link will be inlined by
accident, always give a description text for such a link, one that is
not equal to the path.
Matt Lundin writes:
I had one more question/request concerning archives. Would
it perhaps be possible to enable the file name
substitution (i.e., "%s") after the double semi-colon, so
that the file name can be used as a headline within the
archive file? My ideal setup would be to have a single
archive file for each year's work, with headlines named
according to the original files of the archived subtrees.
E.g.,
,----
| * finances.org
| ** archived item
| * notes.org
| ** archived item
| ** another archived item
`----
This commit does implement this request.
Lines preceded by a colon are treated as fixed-width examples.
This commit improves the moment when the protection of these lines
happens during preprocessing. And it enforces that a space must
follow the colon for the line to be treated in this way.
The relative timer is now shown in the mode-line while running.
There is a new command to pause and continue it.
Thanks to Alan Davis for driving this change.
Sorting footnotes used to be almost like normalization, in that all
footnotes would be collected into a single location. Now sorting
respects the setting of `org-footnote-section'. If that is nil,
sorting will actually move each footnote into the outline node of its
first reference.
This commit add a new face for footnote labels, and activates footnote
labels for mouse clicks and for `C-c C-o', to jump to the
corresponding reference or definition.
This patch implements fully automatic creation of unique labels for
footnotes, which is also turned on as the default setting. The
automatic labels look like [fn:1], [fn:2], etc, using the first
available unused number.
The commit introduces a new variable, `org-footnote-auto-label' with a
number of different options ranging from no auto creation (prompting
the user for a label) to fully automatic creation.
Also, the commit introduces new #+STARTUP options that can be used to
select these settings on a per-file basis.
The dynamic block capturing column view has an :id parameter that does
select from where the column view should be captured. The routine
searching for this entry so far only searched the current file, now it
uses the full ID API to find the entry also in another file.
Furthermore, a value "file:path/to/file.org" will capture the global
column view of that file.
Report by Francois Lagarde.
After the failed implementation of `@0' as a reference for the last
line, this is a second attempt to provide such references. I would
have liked to allow `@last' as the reference, that would have been
beautiful. However, too many regular expressions directly search for
`@' followed by a number, so this is too hard to implement.
Therefore, I am now turning the last row into a row of implicitly
named fields. From now on, $LR1, $LR2,... can be used to refer to
fields in the last row. These names may also appear on the left hand
side of formulas.
A prefix argument to the `org-agenda-show' command is now interpreted
to make sure the entire entry is made visible in the other window, not
only the headline.
Exporting tables to LaTeX suffered from the problem that Org tables
are often long, but that the tabular environment in LaTeX cannot
handle long tables. This patch fixes this issue.
LaTeX export can now deal with very long tables, by setting an option
in the "ATTR_LaTeX:" line. Also, you can specify the alignment by
hand. Here is an example:
Also, table export now correctly deals with tables that start with a
hline. In such a case, also the LaTeX version will have this extra
hline before the first line.
The last data line in a table is often a line with important data, for
example sums of a column. In tables with varying length, the row
number of this line is constantly changing, which makes it hard to
write programs creating tables and then installing formulas.
This patch introduces @0 as a special reference to the last row, so
that @0$3 would be the field in the last row, 3rd column.
Unique identifiers for entries can now be used more efficiently.
Internally, a hash array has replaced the alist used so far to
keep track of the files in which an ID is defined. This makes it
quite fast to find an entry by ID.
There is now a new link type which looks like this:
id:GLOBALLY-UNIQUE-IDENTIFIER
This link points to a specific entry. When you move the entry to
a different file, for example if you move it to an archive
file, this link will continue to work.
The file /org-id.el/ contains an API that can be used to write
code using these identifiers, including creating IDs and finding
them wherever they are.
Org has its own method to create unique identifiers, but if the
system has /uuidgen/ command installed (Mac's and Linux systems
generally do), it will be used by default. You an also select
the method by hand, using the variable =org-id-method=.
If the ID system ever gets confused about where a certain ID is,
it initiates a global scan of all agenda files with associated
archives, all files previously known containing any IDs, and all
currently visited Org-mode files to rebuild the hash. You can
also initiate this by hand: =M-x org-id-update-id-locations=.
Running this command will also dump into the =*Messages*= buffer
information about any duplicate IDs. These should not exist, but
if you /copy/ an entry with its properties, duplicate IDs will
inevitably be produced. This is unavoidable in a plain text
system that allows you to edit the text in arbitrary ways, and a
portion of care on your side is needed to keep this system clean.
The hash is stored in the file =~/.emacs.d/.org-id-locations=.
This is also a change from previous versions where the file was
=~/.org=id-locations=. Therefore, you can remove this old file
if you have it. I am not sure what will happen if the =.emacs.d=
directory does not exists in your setup, but in modern Emacsen, I
believe it should exist. If you do not want to use IDs across
files, you can avoid the overhead with tracking IDs by
customizing the variable =org-id-track-globally=. IDs can then
still be used for links inside a single file.
IDs will also be used when you create a new link to an Org-mode
buffer. If you use =org-store-link= (normally at =C-c l=) inside
en entry in an Org-mode buffer, and ID property will be created
if it does not exist, and the stored link will be an =id:= link.
If you prefer the much less secure linking to headline text, you
can configure the variable =org-link-to-org-use-id=. The default
setting for this variable is =create-if-interactive=, meaning
that an ID will be created when you store a link interactively,
but not if you happen to be in an Org-mode file while you create
a remember note (which usually has a link to the place where you
were when starting remember).
Carsten Dominik
Bastien Guerry