The new keys are b and f. This used to be on the cursor keys, but
they do now again do cursor motion.
This is a significant change in the UI, I hope this will not cause too
many problems.
Using :timetamp t as an option in a clock report now allows
insertion of the timestamp for the clocked entry. Timestamps
are searched for in this order: SCHEDULING, TIMESTAMP, DEADLINE
and TIMESTAMP_IA.
Allow whitespace in code references. Allow the -r switch to remove the
references in the source code even when the lines are not numbered: the
labels can be explicit enough. Note that "-r -k" is the same than no
switch - as expected.
Thanks to Ulf Stegemann for bring this up.
This hook is called in org-clock-in earlier than the existing
org-clock-in-hook. This is useful for functions that need to
modify the Effort property, for example.
Customize the new variable org-footnote-auto-adjust or use the STARTUP
option fnadjust to get automatic renumbering and sorting of footnotes
after each insertion/deletion.
Agenda bulk commands on marked entries now can also set the scheduling
date or a deadline. Normally, all entries will be set to the
specified date. However, when writing the change as "++5d" or "++2w",
then each time stamp will independently be shifted by that amount.
TAB now cycles visibility in plain lists if the cursor is in a plain
list. This corresponds now to the new default value `t' of
`org-cycle-include-plain-lists'. If you want to treat plain list
items as part of the outline hierarchy during cycling of outline
headings (this is what a `t' value used to mean), set this variable to
`integrate'.
This commit implements refiling directly from the agenda.
It also implements a mechanism for selecting a number of entries in
the agenda and then executing a command on all of them. Possible
actions include archive, refile, todo state setting, and more.
Clicking on the clock in the mode line now pops up a menu with
clocking options.
A new command `C-c C-x C-e' allows to set or change the effort
estimate of the task currently being clocked. This is mainly useful
when using an alert notification when the task should be finished.
Based on a patch by Konstantin Antipin.
This commit changes which time is shown in the mode line while
clocking. Normally this will now be the total time ever clocked on
this task and its children.
However, when the task is a repeating one, only the time since the
last reset of the task will be shown. The time of the last reset is
now recorded in a LAST_REPEAT property.
You can also set the CLOCK_MODELINE_TOTAL property to the value
"current" to only show the current clocking instance. Or it may be
the value "today", to only add up the time spent today on this task.
Other possible values are "repeat", "all", or "auto".
Finally, you can set your default for this property with
`org-clock-modeline-total'.
This commit introduces two new variables:
- org-treat-insert-todo-heading-as-state-change
Default is nil. When set to t, adding a new TODO item will be done
by adding an item and the executing an "official" state change which
potentially will trigger state logging.
- org-treat-S-cursor-todo-seletion-as-state-change
Default is t. When set to nil, selecting a TODO state with
S-left/right will not trigger logging, only selecting a new state
with `C-c C-t'. I actually like this a lot and would even consider
making this the default.
Mikael Fornius writes:
> This is my suggestion of an implementation of min/mean/max computation
> in columnview summaries. If you like it feel free to use it.
>
> New operators: {min}, {max} and {mean} possibly prefixed with : for use
> with timevalues.
>
> Example from my running exercise diary:
>
> #+COLUMNS: %DISTANCE{+;%.1f} %HEARTRATE{mean;%.1f} %SPEED{:min} %CALORIES{+}
>
> Gives a colview with summaries:
>
> total distance, mean heartrate, fastest speed (min/km) and total
> calories.
>
> I have tested it on emacs-23 and it works well for me now, also with the
> interactive colview functions.
>
> But you never know really. ;-) Anyway, there should not be any emacs-23
> specific elisp code added afik.
>
> (Because I do not use xemacs I have not tested it with xemacs but the
> small changes I made should be compitable to both xemacs and emacs. I
> would appreciate if someone on this list who uses xemacs will give it a
> try for me. Thanks!)
>
> (This fix also opens up for using user defined lisp functions to
> calculate colview summaries, but I am not sure if that is something
> useful. Like this:
>
> (defun std (&rest values)
> "Compute standard deviation."
> ...)
>
> #+COLUMNS: %DATA{eval:std}
>
> If someone finds this attractive it would now be easy to implement as well.)
>
Hsiu-Khuern Tang writes:
> Hi Carsten,
>
> You recently changed org-edit-src-code to use a separate buffer
> instead of an indirect buffer. One side effect of this is that I
> can no longer edit several code examples at the same time:
> opening the second buffer will silently discard any changes made
> in the first. I would prefer this behavior: when opening the
> second edit source buffer, write any changes in the first buffer
> to the originating Org buffer (but don't save it, of course).
>
> Another approach is to use different buffer names.
The better approach is clearly to allow several buffers, now
implemented with this commit.
There is now a new export function, `org-export-as-org', which
basically creates a copy of the Org file with things like archived
trees, commented trees, and trees deselected by export tags,
stripped.
This commit adds:
{{{date(FORMAT)}}} current date/time, formatted with
`format-time-string'
{{{modification-time(FORMAT)}}} date/time of last modification of
file, formatted with `format-time-string'
{{{input-file}}} the file name of the source Org file.
The commit implements a general mechanism for providing special
(e.g. completion) support for specific link types when entering links
with `C-c C-l'. After calling `C-c C-l', you may now press RET after
inserting a link prefix, and Org will look for a function
`org-PREFIX-complete-link'. Such functions may be defined for any
link types, including link abbreviations. Currently, Org has
`org-file-complete-link' for file name completion, and
`org-bbdb-complete-link' for completion of record names from BBDB.
When refiling, you can now create new parent nodes on the fly. To do
this, set the variable `org-refile-allow-creating-parent-nodes' to
`confirm'. Then, at a refiling prompt, proceed with completion until
you have an existing heading, and then add "/new heading", i.e. a
slash followed by the new heading. That heading will be created as a
child of the existing heading, and the entry to be refiled will end up
under that new heading.
New wrapper span around keyword plus time stamp, with class
timestamp-wrapper.
.timestamp-wrapper {float: right;}
could be a nice entry in a CSS style file.
During secondary agenda filtering, pressing "?" now will install a
filter that selects entries which do not have an effort defined.
This new model was necessary because we needed to stop interpreting
entries with no effort defines as 0 effort. This was inconsistent,
because for normal agenda sorting, the treatment of these entries
depends on the variable `org-sort-agenda-noeffort-is-high'. Now this
variable is also respected during filtering.
This commit implements an important change: When, during a
stuck-project search, a project tree is identified as not stuck, so
far the search would continue after the end of the project tree. From
now on, the search continues in the subtree, so that stuck subprojects
can still be identified.
Anupam Sengupta writes:
> I routinely use time ranges (and occasionally time-stamp ranges)
> in my org files to document the scheduled block of time for a
> meeting or activity. As an example, I will mark meetings as:
>
> * A Meeting
> <2009-03-12 Thu 10:00-11:00>
>
> As often happens with meetings, rescheduling needs to be done and
> I use S-<up> or S-<down> on the time-stamp to make the
> modifications. While this works fine, it usually leads to a
> duplication when the *time* part of the time-stamp needs to be
> changed.
>
> For the same example above, if the time-block has now changed to
> 11:00-12:00, then I need to do S-<up> on both the "10:00" and the
> "11:00" string. I.e,
>
>
> * A Meeting
> <2009-03-12 Thu 11:00-11:00>
> ^
> +---------------- After the first S-<up>
>
> * A Meeting
> <2009-03-12 Thu 11:00-12:00>
> ^
> +---------------- After the second S-<up>
>
> Can we have a feature (with a toggle option perhaps) which would
> *move* the block (i.e., both time entries) by the same amount
> when either one is moved in the same direction. I.e., the
> proposal is to have:
>
> * A Meeting
> <2009-03-12 Thu 11:00-12:00>
> ^ ^
> | |
> | +---------- Automatically shifted
> +---------------- After the S-<up>
This is in fact how changing time works in many applications, and
it does make sense here as well. The commits implements this
change.
It also implements a way to change the start time of an entry from
the agenda. The date is normally changed with S-right/left.
Now, if you add a C-u prefix, the hour will be changed. If you
immediately press S-right/left again, hours will continue to be
changed.
A double prefix will do the same for minutes.
orgstruct++-mode is an enhanced version of orgstruct mode that
also imports all indentation and paragraph settings into the major
mode. Furthermore, it now allows to use M-RET and M-S-RET in items
after the first line. The latter change was a request by Austin
Frank.
This commit makes it possible to force new lines and even empty lines
in the fast tag selection interface, either by splitting tags
definition into several lines, or by inserting "\n" into the tags
list, or by inserting (:newline) into the tags alist.
This is largely a patch from Christopher Suckling
The variables `org-agenda-todo-ignore-deadlines' and
`org-agenda-todo-ignore-with-date, and
`org-agenda-tags-todo-honor-ignore-options' are now all mentioned in
the docs.
Wanrong Lin writes:
2. Can we put all of those state change history logging messages
into a drawer like "STATE-HIST" (when the drawer is defined in
org-drawers), so it is less intrusive in the file?
Yes we can. This commit provides this functionality. It introduces a
new drawer, LOGBOOK. When the variable
`org-log-state-notes-into-drawer' is set, state change time stamps and
notes will go into this drawer, or another one specified by that
variable.
David Lord writes:
I can see that org-clock-persistence-insinuate appeared in 6.11
but I can't find it in the manual. Does it need to be added?
Yes, right.
Emacs 23 introduces `shift-selection-mode', and even turns it on by
default. Therefore, it is fair to assume that users of Emacs 23 will
expect to be able to select a region by holding down shift will moving
the cursor. This conflicts with the use of shifted cursor keys in
Org-mode for other purposes, in particular to "change the item under
the cursor", like it is done for time stamps, item bullet types, TODO
keywords and priorities.
This commit tries to support `shift-selection-mode' as much as possible,
while retaining these valuable commands keys for Org-mode. The
following things are changed:
1. The range of contexts where Org's commands do act is reduced.
- S-up and S-down no longer jump to the previous and next plain list
item - you can use the paragraph commands C-up and C-down for this
quite well.
- S-left and S-right only change the bullet type of a plain list
item when the cursor is *exactly* on the bullet, not just anywhere
in the item line.
2. When a S-cursor key is used outside a special context, a region is
started or extended.
3. When a region has already been started, it will be continue to
extend even if the S-cursor keys move the cursor into a special
context.
4. If you want S-cursor selection to work in headlines as well, you
can set the variable `org-support-shift-select' to
`even-in-headlines'. Then you need to rely on `C-c C-t' to set
TODO keywords, and on `C-c ,' to set priorities.
If you want everything to behave the way it was, set
`org-support-shift-select' to nil.
Formulas can now refer to fields and regions in other tables, be it in
the same file or even in different files.
This also opens the door for more interesting R support, because
arbitrary tables in a file can now be accessed with appropriate
commands.
Finally, this commit also introduces a convenience for creating
references in tables. For the purpose of references, it will always
be *assumed* that there is another hline at the end if each table. So
for example in a table that has only a single hline, to separate
header from data, you can now access all of column two with
"@I$2..@II$2".
Lines preceded by a colon are treated as fixed-width examples.
This commit improves the moment when the protection of these lines
happens during preprocessing. And it enforces that a space must
follow the colon for the line to be treated in this way.
The relative timer is now shown in the mode-line while running.
There is a new command to pause and continue it.
Thanks to Alan Davis for driving this change.
The dynamic block capturing column view has an :id parameter that does
select from where the column view should be captured. The routine
searching for this entry so far only searched the current file, now it
uses the full ID API to find the entry also in another file.
Furthermore, a value "file:path/to/file.org" will capture the global
column view of that file.
Report by Francois Lagarde.
After the failed implementation of `@0' as a reference for the last
line, this is a second attempt to provide such references. I would
have liked to allow `@last' as the reference, that would have been
beautiful. However, too many regular expressions directly search for
`@' followed by a number, so this is too hard to implement.
Therefore, I am now turning the last row into a row of implicitly
named fields. From now on, $LR1, $LR2,... can be used to refer to
fields in the last row. These names may also appear on the left hand
side of formulas.
Exporting tables to LaTeX suffered from the problem that Org tables
are often long, but that the tabular environment in LaTeX cannot
handle long tables. This patch fixes this issue.
LaTeX export can now deal with very long tables, by setting an option
in the "ATTR_LaTeX:" line. Also, you can specify the alignment by
hand. Here is an example:
Also, table export now correctly deals with tables that start with a
hline. In such a case, also the LaTeX version will have this extra
hline before the first line.
Tables, and Hyperlinks that represent inlined images, can now be
equipped with additional information that will be used during
export. The information will be taken from the following special
lines in the buffer and apply to the first following table or
link.
- #+CAPTION: :: The caption of the image or table. This string
should be processed according to the export backend, but
this is not yet done.
- #+LABEL: :: A label to identify the figure/table for cross
references. For HTML export, this string will become the
ID for the `<div class="figure">' element that encapsulates
the image tag and the caption. For LaTeX export, this
string will be used as the argument of a `\label{...}'
macro. These lables will be available for internal links
like `[[label][Table] ]'.
- #+ATTR_HTML: :: Attributes for HTML export of image, to be
added as attributes into the `<img...>' tag. This string
will not be processed, so it should have immediately the
right format.
- #+ATTR_LaTeX: :: Attributes for LaTeX export of images, to
be inserted into the optional argument of the
`\includegraphics[...]{file}' command, to specify scaling,
clipping and other options. This string will not be
processed, so it should have immediately the right
format, like `width=5cm,angle=90'
For LaTeX export, if either a caption or a label is given, the
element will be exported as a float, i.e. wrapped into a figure
or table environment.
This patch improves the internal handling of the large number of
export options that Org-mode has. In particular, it now defines a
single constant, `org-export-plist-vars' that contains the full list
of options, and how these can be accessed through variables, and
through the #+OPTIONS line. Before the patch, there used to be a
separate list or the OPTIONS handling, which has gotten out of sync.
This now no longer can happen.
Also, this patch adds two new variables, `org-export-with-priority',
and `org-export-with-todo-keywords', which can be used to turn the
export of TODO keywords and priority cookies on and off, so that these
can simply disappear and not be shown in the exported file. In fact,
the default for the priority cookie is to remove it.
There were bugs in the mapping API, pointed to by Samuel Wales:
Manual says:
The following example counts the number of entries with TODO keyword
WAITING, in all agenda files.
(length (org-map-entries t "/+WAITING" nil 'agenda))
Org says invalid function for the string.
First of all, the example in the manual was wrong, the "nil" should be
gone. Second, the mapping function did not return all results in a
list, so that `length' could not count them.
This patch fixes these issues.
In addition to "<now>", "<today>", "<yesterday>", and
"<tomorrow>", there are more special values accepted now in
time comparisons in property searches: You may use strings
like =<+3d>= or =<-2w>=, with units d, w, m, and y for day,
week, month, and year, respectively
Thanks to Linday Todd for this proposal.
So far, the only way to select tags for inheritance was to
allow it for all tags, or to do a positive selection using
one of the more complex settings for
`org-use-tag-inheritance'. It may actually be better to
allow inheritance for all but a few tags, which was difficult
to achieve with this methodology.
This patch introduces a new option,
`org-tags-exclude-from-inheritance' which allows to specify an
exclusion list for inherited tags.
This patch implements a relative time for taking timed notes, useful
for example while watching a video, or during a meeting which is also
recorded. Here are the new commands:
- `C-c C-x .' ::
Insert a relative time into the buffer. The first time
you use this, the timer will be started. When called
with a prefix argument, the timer is reset to 0.
- `C-c C-x -' ::
Insert a description list item with the current relative
time. With a prefix argument, first reset the timer to 0.
- `C-c C-x 0' ::
Reset the timer without inserting anything into the buffer.
By default, the timer is reset to 0. When called with a
`C-u' prefix, reset the timer to specific starting
offset. The user is prompted for the offset, with a
default taken from a timer string at point, if any, So this
can be used to restart taking notes after a break in the
process. When called with a double prefix argument
`C-c C-u', change all timer strings in the active
region by a certain amount. This can be used to fix timer
strings if the timer was not started at exactly the right
moment.
When starting the publishing process with
`org-publish-current-project' from a file that is located in a project
that is also a component of a parent project, this patch now makes
sure that the entire parent project is published instead.
This patch defines a new minor mode, `org-remember-mode', which is
turned on when Org-mode is used to handle a remember buffer. This
provides a safe way to modify keybindings (in
`org-remember-mode-map'), without overwriting keys in `org-mode-map'.
Since Org put remember buffers into Org-mode, remember-mode-map will
be entirely ignored.
This patch implements the possibility to translate links.
It can be useful if use both planner and Org-mode, if you sometimes
copy text from one side to the other and you do not want to worry
about link syntax. This patch allows links created with planner to
function correctly in Org-mode. I would probably be simple to
implement the reverse conversion in planner as well.
This patch is a first shot at this functionality and very likely can
be improved.
The refile command allows to move a subtree to under some other
heading, in the current file or even in a different file.
Sometimes one has a number of sibling subtrees that should all be
refiled to the same location. This patch implements a simplification
for this process. You can mark the region of subtrees (using
transient-mark-mode in required for this) and then move them all with
a single command.
Org-mode produces summaries of clocked items in the form of Org-mode
tables. This patch implements the possibility to define formulas that
should be applied to the clock tables, in order to do additional
analysis.
Formulas for clock tables are supported in two ways.
First, a formula can simply be added by hand to a table. Part of this
patch makes sure that, when the previous version of the table contains
a #+TBLFM: line, it will be copied to the new version.
Secondly, the clocktable definition allows a new parameter
`:formula'. The string value of this parameter will be installed as
the formula line for the table. If a formula parameter is given, it
will overrule any previous formula line.
As a special case, using the symbol `%' as the formula will install a
formula that will compute the fraction of total time that was spent in
a subtree.
In both cases, the formulas will be immediately evaluated after the
table has been created.
Jurgen Defume asked for a way to display only logging information in
the agenda. This patch implements such a possibility. It works by
calling `org-agenda-log-mode' (bound to `l' in the agenda) with a
double prefix arg. This sets the variable `org-agenda-show-log' to a
special value `only' which is then interpreted by the agenda-creating
functions.
Org-mode uses a special setup with a number of different customization
variables to specify how a file should be opened when following a
:file:..." link with `C-c C-o'. By using a `C-u' prefix, it was
possible to overrule the customized setup and to force opening the
file in Emacs.
Samuel Wales requested to amend this process, so that a double prefix
argument would do the opposite: force opening the application *outside*
of Emacs, using a system default application. This is what this patch
implements.
Internally this works through a new entry in system specific constants
`org-file-apps-defaults-gnu', org-file-apps-defaults-macosx', and
`org-file-apps-defaults-windowsnt'. The new entry has the car
`system' and specifies the command that should be used for the double
C-u calls. As before, the user option `org-file-apps' can overrule
these default settings.
Note that all this only applies to following "file:" links, and does
not make a difference for, for example, "http:" links.
Carsten Dominik
Bastien Guerry