Custom commands can now bind `org-agenda-filter-preset'. This filter
will then be present in the agenda view and persist through refresh
and further filtering. Only a new agenda command will remove the
filter again.
uuidgen ids may start with a number and therefore are not valid names
in HTML. Therefore we now use and "ID-" prefix for such IDs when
exporting to HTML.
The variable org-priority-faces can now be used to set special faces
for different priority cookies.
Also, in the agenda, the default is now to fontify only the priority
cookie, not the entire task. See the variable
`org-agenda-fontify-priorities'.
Like TODO keywords before, now also tags each get their own CSS class,
given by the tag itself. Invalid characters in tags are all replaced
by "_" to make sure the resulting HTML remains valid.
Two new variables can be used to add a prefix to the class names for
TODO keywords and tags.
This commit adds a key (`C-c C-x o') to toggle the ORDERED property of
a tree. And it adds menu entries for doing this, which also reflect
the current state of the tree.
The variables =org-agenda-todo-ignore-with-date=,
=org-agenda-todo-ignore-with-date=, and
=org-agenda-todo-ignore-with-date= make it possible to
exclude TODO entries which have this kind of planning info
associated with them. This is most useful for people who
schedule everything, and who use the TODO list mainly to find
things that are not yet scheduled. Thomas Morgan pointed out
that also the tags-todo search may serve exactly this
purpose, and that it might be good to have a way to make
these variables also apply to the tags-todo search. I can
see than, but could not convince myself to make this the
default. A new variable must be set to make this happen:
=org-agenda-tags-todo-honor-ignore-options=.
Formulas can now refer to fields and regions in other tables, be it in
the same file or even in different files.
This also opens the door for more interesting R support, because
arbitrary tables in a file can now be accessed with appropriate
commands.
Finally, this commit also introduces a convenience for creating
references in tables. For the purpose of references, it will always
be *assumed* that there is another hline at the end if each table. So
for example in a table that has only a single hline, to separate
header from data, you can now access all of column two with
"@I$2..@II$2".
The conversion commands `C-c -' and `C-c *' are now better
behaved and therefore more useful, I hope.
If there is an active region, these commands will act on the
region, otherwise on the current line.
- C-c - :: This command turns headings or normal lines into
items, or items into normal lines. When there is a
region, everything depends on the first line of the
region:
- if it is a item, turn all items in the region into
normal lines.
- if it is a headline, turn all headlines in the region
into items.
- if it is a normal line, turn all lines into items.
- special case: if there is no active region and the
current line is an item, cycle the bullet type of the
current list.
- C-c * :: This command turns items and normal lines into
headings, or headings into normal lines. When there is
a region, everything depends on the first line of the
region:
- if it is a item, turn all items in the region into
headlines.
- if it is a headline, turn all headlines in the region
into normal lines.
- if it is a normal line, turn all lines into headlines.
The directory used for attachments to an entry is by default chosen
automatically, with a name derived from the entry ID to make sure it
is unique.
However, in some cases it may be better to assign a user-chosen
directory to and entry, to be used for attachments. This commits
implements this change. See the documentation changes for information
on how things work.
Thanks to Jason Jackson for pushing this part.
The second change made bu this commit is that it is now possible to
inherit the attachment directory from a parent, so that an entire
project subtree can use a single directory.
Two new variables, `org-export-html-inline-image-extensions' and
`org-export-latex-inline-image-extensions' now define the file
extensions that will be considered for inlining images. The default
for HTML is png, jpg, jpeg, and gif files. The default for LaTeX is
png, jpg, jpeg, and pdf, assuming processing with `pdflatex'.
For LaTeX export, this can lead to conflicts for links that point
to non-image PDF files. To avoid that such a link will be inlined by
accident, always give a description text for such a link, one that is
not equal to the path.
Lines preceded by a colon are treated as fixed-width examples.
This commit improves the moment when the protection of these lines
happens during preprocessing. And it enforces that a space must
follow the colon for the line to be treated in this way.
When including s file in example or src markup, you can now also
specify the switches for code references and line numbering that work
also when directly adding SRC or EXAMPLE blocks.
Reported by Manish.
The relative timer is now shown in the mode-line while running.
There is a new command to pause and continue it.
Thanks to Alan Davis for driving this change.
This commit add a new face for footnote labels, and activates footnote
labels for mouse clicks and for `C-c C-o', to jump to the
corresponding reference or definition.
This patch implements fully automatic creation of unique labels for
footnotes, which is also turned on as the default setting. The
automatic labels look like [fn:1], [fn:2], etc, using the first
available unused number.
The commit introduces a new variable, `org-footnote-auto-label' with a
number of different options ranging from no auto creation (prompting
the user for a label) to fully automatic creation.
Also, the commit introduces new #+STARTUP options that can be used to
select these settings on a per-file basis.
Setting org-footnote-section to nil now causes definitions to be
inserted at the end of the current outline node, instead of into a
special node names "Footnotes".
This patch introduces more hooks for preprocessing the export buffer,
at various strategic moments. See the Changes.org file for a
description of the hooks.
The dynamic block capturing column view has an :id parameter that does
select from where the column view should be captured. The routine
searching for this entry so far only searched the current file, now it
uses the full ID API to find the entry also in another file.
Furthermore, a value "file:path/to/file.org" will capture the global
column view of that file.
Report by Francois Lagarde.
Yesterday I pushed Org 6.16 into the Emacs CVS trunk, so we will see
this version when Emacs 23 gets released. Unless, of course, the
release is delayed and we can install more updates later.
Exporting tables to LaTeX suffered from the problem that Org tables
are often long, but that the tabular environment in LaTeX cannot
handle long tables. This patch fixes this issue.
LaTeX export can now deal with very long tables, by setting an option
in the "ATTR_LaTeX:" line. Also, you can specify the alignment by
hand. Here is an example:
Also, table export now correctly deals with tables that start with a
hline. In such a case, also the LaTeX version will have this extra
hline before the first line.
Unique identifiers for entries can now be used more efficiently.
Internally, a hash array has replaced the alist used so far to
keep track of the files in which an ID is defined. This makes it
quite fast to find an entry by ID.
There is now a new link type which looks like this:
id:GLOBALLY-UNIQUE-IDENTIFIER
This link points to a specific entry. When you move the entry to
a different file, for example if you move it to an archive
file, this link will continue to work.
The file /org-id.el/ contains an API that can be used to write
code using these identifiers, including creating IDs and finding
them wherever they are.
Org has its own method to create unique identifiers, but if the
system has /uuidgen/ command installed (Mac's and Linux systems
generally do), it will be used by default. You an also select
the method by hand, using the variable =org-id-method=.
If the ID system ever gets confused about where a certain ID is,
it initiates a global scan of all agenda files with associated
archives, all files previously known containing any IDs, and all
currently visited Org-mode files to rebuild the hash. You can
also initiate this by hand: =M-x org-id-update-id-locations=.
Running this command will also dump into the =*Messages*= buffer
information about any duplicate IDs. These should not exist, but
if you /copy/ an entry with its properties, duplicate IDs will
inevitably be produced. This is unavoidable in a plain text
system that allows you to edit the text in arbitrary ways, and a
portion of care on your side is needed to keep this system clean.
The hash is stored in the file =~/.emacs.d/.org-id-locations=.
This is also a change from previous versions where the file was
=~/.org=id-locations=. Therefore, you can remove this old file
if you have it. I am not sure what will happen if the =.emacs.d=
directory does not exists in your setup, but in modern Emacsen, I
believe it should exist. If you do not want to use IDs across
files, you can avoid the overhead with tracking IDs by
customizing the variable =org-id-track-globally=. IDs can then
still be used for links inside a single file.
IDs will also be used when you create a new link to an Org-mode
buffer. If you use =org-store-link= (normally at =C-c l=) inside
en entry in an Org-mode buffer, and ID property will be created
if it does not exist, and the stored link will be an =id:= link.
If you prefer the much less secure linking to headline text, you
can configure the variable =org-link-to-org-use-id=. The default
setting for this variable is =create-if-interactive=, meaning
that an ID will be created when you store a link interactively,
but not if you happen to be in an Org-mode file while you create
a remember note (which usually has a link to the place where you
were when starting remember).
The old syntax for setting HTML link attributes is no longer
supported. Existing links will not fail, but the attributes specified
in the old way will be ignored.
Tables, and Hyperlinks that represent inlined images, can now be
equipped with additional information that will be used during
export. The information will be taken from the following special
lines in the buffer and apply to the first following table or
link.
- #+CAPTION: :: The caption of the image or table. This string
should be processed according to the export backend, but
this is not yet done.
- #+LABEL: :: A label to identify the figure/table for cross
references. For HTML export, this string will become the
ID for the `<div class="figure">' element that encapsulates
the image tag and the caption. For LaTeX export, this
string will be used as the argument of a `\label{...}'
macro. These lables will be available for internal links
like `[[label][Table] ]'.
- #+ATTR_HTML: :: Attributes for HTML export of image, to be
added as attributes into the `<img...>' tag. This string
will not be processed, so it should have immediately the
right format.
- #+ATTR_LaTeX: :: Attributes for LaTeX export of images, to
be inserted into the optional argument of the
`\includegraphics[...]{file}' command, to specify scaling,
clipping and other options. This string will not be
processed, so it should have immediately the right
format, like `width=5cm,angle=90'
For LaTeX export, if either a caption or a label is given, the
element will be exported as a float, i.e. wrapped into a figure
or table environment.
Tassilo Horn asked for this, because he finds the default behavior of
silently choosing a different row too confusing. I actually do agree.
The main use of this feature was running averages, if you need this
feature, you can customize the variable
`org-table-error-on-row-ref-crossing-hline'.
Samuel Wales writes:
> It would be really nice if you could set tags to different
> faces the way you can with todo keywords.
>
> For example, you could set :urgent: to a bright color. Or
> set a face for all contexts.
This patch add a new customization variable `org-tag-faces' that can
be used to specify such faces. The rest of the patch implements these
new faces in Org-mode buffers as well as in the agenda.
Harri Kiiskinen suggested that it might be useful to make the LOCATION
property an inherited property during iCalendar export. In this way
you can have set the LOCATION for a whole set of items by setting it
only in the parent.
While this will slow down iCalendar export for large files, I think it
can be quite useful. This patch does implement the basic code needed
for this functionality. However, you still need to tell Org that
LOCATION should be inherited, by setting org-use-property-inheritance.
If you set it to t, beware that this may trigger a significant
slowdown when creating the match view in the agenda. So it may be
better to set this variable to
(setq org-use-property-inheritance '("LOCATION"))
instead.
This patch improves the internal handling of the large number of
export options that Org-mode has. In particular, it now defines a
single constant, `org-export-plist-vars' that contains the full list
of options, and how these can be accessed through variables, and
through the #+OPTIONS line. Before the patch, there used to be a
separate list or the OPTIONS handling, which has gotten out of sync.
This now no longer can happen.
Also, this patch adds two new variables, `org-export-with-priority',
and `org-export-with-todo-keywords', which can be used to turn the
export of TODO keywords and priority cookies on and off, so that these
can simply disappear and not be shown in the exported file. In fact,
the default for the priority cookie is to remove it.
In addition to "<now>", "<today>", "<yesterday>", and
"<tomorrow>", there are more special values accepted now in
time comparisons in property searches: You may use strings
like =<+3d>= or =<-2w>=, with units d, w, m, and y for day,
week, month, and year, respectively
Thanks to Linday Todd for this proposal.
So far, the only way to select tags for inheritance was to
allow it for all tags, or to do a positive selection using
one of the more complex settings for
`org-use-tag-inheritance'. It may actually be better to
allow inheritance for all but a few tags, which was difficult
to achieve with this methodology.
This patch introduces a new option,
`org-tags-exclude-from-inheritance' which allows to specify an
exclusion list for inherited tags.
This patch does a lot of things. First, it makes sure that the tags
transferred to the agenda as text properties on each line are do carry
information about there origin (in the form of an `inherited' text
property). Then it modifies the function creating agenda lines so
that inherited tags will be listed and identified as such in the
agenda.
This new feature can be turned off with a new variable,
`org-agenda-show-inherited-tags'.
This file implements a special function to copy text from a w3m buffer
in a way that when the text is yanked back into an Org-mode buffer,
the links will be translated to Org syntax.
This cleans up the implementation of the timer. Most important change
is that, after starting a time list with `C-c C-x -', you can then
simply use M-RET to add new items, which is addictive!
This patch implements a relative time for taking timed notes, useful
for example while watching a video, or during a meeting which is also
recorded. Here are the new commands:
- `C-c C-x .' ::
Insert a relative time into the buffer. The first time
you use this, the timer will be started. When called
with a prefix argument, the timer is reset to 0.
- `C-c C-x -' ::
Insert a description list item with the current relative
time. With a prefix argument, first reset the timer to 0.
- `C-c C-x 0' ::
Reset the timer without inserting anything into the buffer.
By default, the timer is reset to 0. When called with a
`C-u' prefix, reset the timer to specific starting
offset. The user is prompted for the offset, with a
default taken from a timer string at point, if any, So this
can be used to restart taking notes after a break in the
process. When called with a double prefix argument
`C-c C-u', change all timer strings in the active
region by a certain amount. This can be used to fix timer
strings if the timer was not started at exactly the right
moment.
I didn't fix everything since there are differences in word spellings
in different countries. This patch corrects obvious errors in names
and spelling.
Jurgen Defume asked for a way to display only logging information in
the agenda. This patch implements such a possibility. It works by
calling `org-agenda-log-mode' (bound to `l' in the agenda) with a
double prefix arg. This sets the variable `org-agenda-show-log' to a
special value `only' which is then interpreted by the agenda-creating
functions.
When yanking a cut/copied subtree or a series of trees, even
the nomal yank key `C-y' does now adjust the level of the tree
to make it fit into the current outline position, without
loosing its identity, and without swallowing other subtrees.
This uses the command `org-past-subtree'. An additional
change in that command has been implemented: Normally, this
command picks the right outline level from the surrounding
*visible* headlines, and uses the smaller on. So it the
cursor is between a level 4 and a level 3 headline, the tree
will be pasted as level 3. Now, if the cursor is actually
*at* the beginning of a headline, the level of that headline
will be used. So lets say you have a tree like this:
* Level one
** Level two
(1)
(2)* Level one again
with (1) and (2) indicating possible cursor positions for the
insertion. When at (1), the tree will be pasted as level 2.
When at (2), it will be pasted as level 1.
If you do not like `C-y' to behave like this, configure the
variable `org-yank-adjusted-subtrees'.
Thanks to Samuel Wales for this idea and a partial implementation.
Carsten Dominik
Bernt Hansen