* test-org.el (test-org/org-link-escape-ascii-character)
(test-org/org-link-escape-ascii-ctrl-character)
(test-org/org-link-escape-multibyte-character)
(test-org/org-link-escape-custom-table)
(test-org/org-link-escape-custom-table-merge)
(test-org/org-link-unescape-ascii-character)
(test-org/org-link-unescape-ascii-ctrl-character)
(test-org/org-link-unescape-multibyte-character)
(test-org/org-link-unescape-ascii-extended-char): New tests for
unicode aware percent escaping
All tests for escaping/unescaping multibyte characters are expected to
fail at the moment, because org-link-escape/unescape is not yet
unicode aware.
* lisp/org-latex.el (org-export-latex-make-header): Run the title through
`org-export-latex-fontify-headline'.
(org-export-latex-fontify-headline): Do the protection of math
snippets also here
* lisp/org-latex.el (org-export-as-latex): Sent the section title
through the preprocessor.
Hi all,
This patch fixes the issue I originally described here:
http://article.gmane.org/gmane.emacs.orgmode/32281
It preserves math-mode delimiters (e.g. "$" and "\(") in the document
title when exporting to LaTeX. (That is, it prevents them from being
escaped, by running the title through org-export-preprocess-string,
which marks them with the org-protected property.) It should work
regardless of whether the title is pulled from a headline, from the text
before the first headline, or from an explicit #+TITLE declaration.
(This is my first time contributing a patch to a Free Software project
-- so please, let me know what you think!)
Best,
Richard
* lisp/org.el (org-open-at-point): Don't do footnote action if cursor is
on a bracket link.
Sebastian Mengin writes:
> Hi,
>
> Consider the following minimal example:
>
> Text[fn:1]
>
> * Footnotes
> [fn:1] Note with a [[file:abecedaire.jpg][link]].
>
> Here with orgmode 7.02, doing C-c C-o on the link moves the cursor on
> [fn:1] and says in the minibuffer: "Position saved mark to ring, go back
> with C-c &", instead of opening the linked file.
>
> Is this a bug?
>
* lisp/org-clock.el (org-get-clocktable)
previous patch incorrectly required whitespace in front of #+BEGIN: and #+END:
TINYCHANGE - This patch is in the public domain.
* lisp/org-src.el (org-edit-src-code): Allow region to be inherited by
edit buffer when mark is one character beyond end of src block.
Thanks to Jambunathan K. for the bug report:
C-c C-v C-M-h and C-c C-v C-x interaction
In the block below do
1. C-c C-v C-M-h, C-c C-v C-x C-M-\
2. Mark (just) the code-block with C-SPC etc etc. C-c C-v C-x C-M-\
See the difference in behaviour.
<text:p text:style-name="Standard">This is a xref to
<text:bookmark-ref text:reference-format="text"
text:ref-name="__RefHeading__1669_1684552201">Heading8
</text:bookmark-ref>.</text:p>
I have transient mark mode on.
Thanks to Nicolas Goaziou for pointing this out
* lisp/ob-ref.el (org-babel-ref-at-ref-p): Use higher level function
for testing list membership.
* lisp/ob.el (org-babel-read-result): Use higher level function for
testing list membership.
(org-babel-result-end): Use higher level function for testing list
membership.
* lisp/ob-sqlite.el (ob-eval): require ob-eval for external command
execution
(org-babel-execute:sqlite): no longer uses the init option for
passing commands to sqlite
* lisp/org.el (org-indent-line-function): drawers and blocks have no
influence on indentation of text below. Also fix indentation problem
with a block at column 0 and add a special case for literal examples.
* lisp/ob-ref.el (org-babel-ref-resolve): Recognize `list' as a unique
type of data
(org-babel-ref-at-ref-p): Recognize `list' as a unique type of data
* lisp/ob.el (org-babel-read-result): Recognize `list' as a unique
type of data
(org-babel-read-list): A function to read a textual Org-mode list
into an emacs-lisp list.
(org-babel-insert-result): Recognizes the "list" result param to
insert data as an Org-mode list.
(org-babel-result-end): Find the end of an Org-mode list.
(org-babel-merge-params): Add "list" as a result param.
* doc/org.texi (results): Documentation of the new "list" results
header argument.
* lisp/org-table.el (orgtbl-after-send-table-hook): New hook.
(orgtbl-ctrl-c-ctrl-c): Run `orgtbl-after-send-table-hook' when a
table was sent.
(orgtbl-send-table): Return the number of sent tables, or nil if no
sending has happened.
Patch by Seweryn Kokot. TINYCHANGE
* lisp/org-clock.el (org-get-clocktable):
(org-in-clocktable-p):
(org-clocktable-shift):
(org-clocktable-steps): Fix regexp to allow for indented clock tables
#+BEGIN: and #+END: were expected only at the first column in some
places.
#BEGIN: and #END: were erroneously recognized inside normal lines in
other instances.
always allow whitespace after #BEGIN: and #END:, not just a single space
TINYCHANGE - This patch is in the public domain.
This patch supports org-capture (with fallback to org-remember) for
org-velocity. It also effects some internal changes, principally due to
the use of `Electric-command-loop' to replace an expedient equivalent.
* doc/org.texi (Include files): Document :minlevel.
* lisp/org-exp.el (org-export-handle-include-files): Support :minlevel
property.
(org-get-file-contents): New argument minlevel to demote included
content.
On Sat, Nov 13, 2010 at 1:12 AM, Carsten Dominik
<carsten.dominik@gmail.com> wrote:
>
> On Nov 10, 2010, at 3:46 AM, Jianshi Huang wrote:
>
>> Hi,
>>
>> I know I can include any file using #+INCLUDE.
>>
>> I need to include several org files, but they were edited
>> independently as a complete document.
>>
>> Now I want to lower the levels of headers in these org files
>> automatically during inclusion. Is there a way to do that?
>
> No. But since #+include accepts arguments, it could be implemented,
> something like
>
> #+include "aaa.org" :minlevel 4
>
> or so. I would accept a good patch to this effect.
Here's a patch. I tested it with a simple document and works fine.
Thanks,
Puneeth
Carsten Dominik <carsten.dominik@gmail.com> writes:
> On Oct 29, 2010, at 5:22 AM, Jambunathan K wrote:
>
>> "Thomas S. Dye" <tsd@tsdye.com> writes:
>>
>>> Aloha Jambunathan K.,
>>>
>>> Yes, thanks for that suggestion. It should work on your example, but
>>> it breaks external links, like this:
>>>
>>> \hyperref[http://www.ctan.org/tex-archive/macros/latex/contrib/koma-script/
>>> ]{KOMA-script}
>>>
>>> External links require the \href{}{} command. It appears the LaTeX
>>> export process no longer distinguishes internal and external links,
>>> as
>>> I believe it used to do.
>>>
>>
>> This is the problematic commit:
>>
>> commit f5918bdcc0
>> parent df5894cdcb
>> Date: Sun Oct 17 08:29:51 2010 +0000
>>
>> LaTeX export: use org-export-latex-hyperref-format
>
> I have just reverted this commit.
>
> - Carsten
>
Looks like time to change the variable name which is actually confusing.
Since href and hyperref are two different things, I renamed the existing
`org-export-latex-hyperref-format' variable as
`org-export-latex-href-format' and introduced a new one
`org-export-latex-hyperref-format'.
* org-latex.el (org-export-latex-hyperref-format): New option.
(org-export-latex-href-format): Renamed the existing variable
`org-export-latex-hyperref-format' as `org-export-latex-href-format'
(org-export-latex-links): Use `org-export-latex-hyperref-format' and
`org-export-latex-href-format'
Thanks and Regards
Noorul
>>
>> * lisp/org-latex.el (org-export-latex-links) : Replaced hard coded
>> hyperref format with custom
>> variable `org-export-latex-hyperref-format'
>>
>> Note that href is not same as hyperref.
>>
>> Jambunthan K.
>>
>>
>>> All the best,
>>> Tom
>>>
>>> On Oct 28, 2010, at 3:30 PM, Jambunathan K wrote:
>>>
>>>>
>>>> Thomas
>>>>
>>>> There was a hint at possible solution (or atleast a partial
>>>> solution) in
>>>> my original post. Did you try it before jumping in to rough waters
>>>> or
>>>> digging deeper?
>>>>
>>>> Do
>>>>
>>>> ,----
>>>> | M-x customize-variable RET org-export-latex-hyperref-format'
>>>> `----
>>>>
>>>> so that your .emacs has an entry like this
>>>>
>>>> ,---- [.emacs]
>>>> |
>>>> | (custom-set-variables
>>>> | '(org-export-latex-hyperref-format "\\hyperref[%s]{%s}"))
>>>> |
>>>> `----
>>>>
>>>> The above setting solves the problem for me with the following
>>>> simple
>>>> Org file.
>>>>
>>>> * Heading1
>>>> Make this section as large as possible so that it fills atleast a
>>>> page.
>>>>
>>>> * Heading2
>>>> Links to [[Heading1]]
>>>>
>>>> Jambunathan K.
>>>>
>>>> "Thomas S. Dye" <tsd@tsdye.com> writes:
>>>>
>>>>> On Oct 28, 2010, at 12:35 PM, Nick Dokos wrote:
>>>>>
>>>>>> Thomas S. Dye <tsd@tsdye.com> wrote:
>>>>>>
>>>>>>> On Oct 28, 2010, at 11:01 AM, Jambunathan K wrote:
>>>>>>>
>>>>>>>
>>>>>>> This is a regression. release-7.01h is good. HEAD is bad. I get
>>>>>>> the
>>>>>>> following line with release-7.01h.<
>>>>>>>
>>>>>>> Links to \hyperref[sec-1]{Heading1}
>>>>>>>
>>>>>>> Jambunathan K.
>>>>>>>
>>>>>>> Aloha Jambunathan K.,
>>>>>>>
>>>>>>> Very many thanks for this information. I have Org-mode version
>>>>>>> 7.01trans
>>>>>>> (release_7.01h.880.g7531f). I take it the problem I'm having is
>>>>>>> due to a relatively recent change
>>>>>>> to Org-mode. If there is anything I can do to help isolate the
>>>>>>> problem, please let me know.
>>>>>>>
>>>>>>
>>>>>> Tom,
>>>>>>
>>>>>> If you have the time and the inclination, you might try bisecting
>>>>>> your
>>>>>> way through. Bisecting org-mode problems is actually a very good
>>>>>> way
>>>>>> to
>>>>>> practice because the turnaround time is very small.
>>>>>>
>>>>>> Prerequisites:
>>>>>>
>>>>>> * you have a clone of the org-mode git repository.
>>>>>>
>>>>>> * you have an org test file.
>>>>>>
>>>>>>
>>>>>> Steps:
>>>>>>
>>>>>> * [optional, but it makes me feel a little safer] create a test
>>>>>> branch
>>>>>> and switch to it:
>>>>>>
>>>>>> git checkout -b test-branch master
>>>>>>
>>>>>> * I clean out all the compiled files while doing a bisection: it's
>>>>>> quicker
>>>>>> than regenerating them every time and I don't have to worry (much)
>>>>>> about
>>>>>> emacs loading a wayward .elc file:
>>>>>>
>>>>>> make clean
>>>>>>
>>>>>> * start the bisection and tell git which commit is known good and
>>>>>> which is known bad:
>>>>>>
>>>>>> git bisect start
>>>>>>
>>>>>> # current version is bad
>>>>>> git bisect bad
>>>>>>
>>>>>> # release_7.01h was good - I got the name with ``git tag''
>>>>>> git bisect good release_7.01h
>>>>>>
>>>>>> That checks out a revision half-way in between the bad and good
>>>>>> commits: since
>>>>>> there are about 900 commits in between, you'll be at approx the
>>>>>> 450-
>>>>>> mark and it
>>>>>> should take about 10 bisections to get it down to a single commit.
>>>>>>
>>>>>> * LOOP Now all you have to do is repeat the following steps:
>>>>>>
>>>>>> # since you did ``make clean'' you don't have to worry about .elc
>>>>>> files
>>>>>> # just reload all the .el files.
>>>>>> M-x org-reload
>>>>>>
>>>>>> visit your org test file, export to LaTeX, check for \href/
>>>>>> \hyperref (or
>>>>>> whatever other telltale sign shows badness/goodness).
>>>>>>
>>>>>> # tell git about it
>>>>>> git bisect good *OR* git bisect bad
>>>>>>
>>>>>> This last step will check out another revision and in about 10
>>>>>> repetitions
>>>>>> of the loop, you are done.
>>>>>>
>>>>>> * Tell git you are done, so it can clean up:
>>>>>>
>>>>>> git bisect reset
>>>>>>
>>>>>> Theoretically, you could do all of this in your master branch
>>>>>> without
>>>>>> creating a test-branch and this last step will reset everything to
>>>>>> the
>>>>>> way it was before ``git start''.
>>>>>>
>>>>>> * Post the offending commit to the list.
>>>>>>
>>>>>> * Get back to your master branch:
>>>>>>
>>>>>> git checkout master
>>>>>>
>>>>>> * If you created a test-branch, clean it out:
>>>>>>
>>>>>> git branch -d test-branch
>>>>>>
>>>>>> * [Optional] Recreate your .elc files and reload them:
>>>>>>
>>>>>> make
>>>>>> M-x org-reload
>>>>>>
>>>>>>
>>>>>> And that's it: a half-hour of fun and games. Unless of course, you
>>>>>> hit upon a revision that is neither good nor bad (in the above
>>>>>> restricted
>>>>>> sense): you might get some other problem that prevents you from
>>>>>> being
>>>>>> able to answer. That might or might not be easy to resolve, so
>>>>>> I'll
>>>>>> leave that as an advanced topic (truth be told, I came up against
>>>>>> this
>>>>>> situation a couple of days ago and I didn't know how to proceed:
>>>>>> so
>>>>>> it's ignorance more than anything else that prevents me from
>>>>>> saying
>>>>>> anything more).
>>>>>>
>>>>>> If you want to try, I'd be happy to answer questions - I might try
>>>>>> the
>>>>>> bisection later on tonight myself in any case. And btw, this is of
>>>>>> course archeology of a different (and much easier) kind, so I
>>>>>> imagine
>>>>>> you'll take to it like a fish in water :-)
>>>>>>
>>>>>> HTH,
>>>>>> Nick
>>>>>
>>>>> Hi Nick,
>>>>>
>>>>> Irresistible hook at the end there. I wish this stuff were as easy
>>>>> as
>>>>> archaeology is for me. Your instructions are terrific, though.
>>>>>
>>>>> I did hit on a revision that was neither good nor bad:
>>>>>
>>>>> commit 8562273b27
>>>>> Author: Eric Schulte <schulte.eric@gmail.com>
>>>>> Date: Sat Oct 16 13:21:47 2010 -0600
>>>>>
>>>>> ob-ref: don't forget arguments to referenced code blocks
>>>>>
>>>>> * lisp/ob-ref.el (org-babel-ref-resolve): bringing the referent
>>>>> arguments back to their params before evaluation
>>>>>
>>>>> This one puts these lines in *Messages* when I export to LaTeX
>>>>>
>>>>> executing Org code block...
>>>>> if: Symbol's value as variable is void: result-type
>>>>>
>>>>> I tried using different commits for the initial git bisect good,
>>>>> hoping that would skip by the problem, but this one appears to have
>>>>> stuck around a while. My other two tries both ended with this same
>>>>> error, but with different commits.
>>>>>
>>>>> I'm not sure what to do next. This problem isn't yielding to my
>>>>> archaeo-logic. :)
>>>>>
>>>>> All the best,
>>>>> Tom
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Please use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Eric Schulte
David Maus
Carsten Dominik
Richard Lawrence
Achim Gratz
Dan Davison
Nicolas Goaziou
John Wiegley
Bastien Guerry
Achim Gratz
Paul M. Rodriguez
Puneeth Chaganti
Noorul Islam