* lisp/org-habit.el: (org-habit-parse-todo) Don't parse more days than
needed.
When constructing a consistency graph, org-habit now stops searching
for timestamps when the number of matches exceeds the span of time
displayed in the graph. This can lead to a significant speedup in
agenda construction, especially for entries with many logbook entries.
Previously, org-habit would parse all logbook timestamps, even if they
numbered in the hundreds.
* lisp/ob.el (org-babel-map-inline-src-blocks): Macro for executing
code in each inline code block.
(org-babel-execute-buffer): Executes inline code blocks as well as
regular code blocks.
* lisp/org-clock.el (org-clock-before-select-task-hook): New hook.
(org-clock-select-task): Run new hook.
Hi Org-moders,
I am often frustrated because I clock a lot of things and some of them
are repeated (i.e, coffee, read mails, etc.). So when I want to clock
time I spend drinking coffee, the best I found was to search for a
headline matching "Coffee". Or to tag frequent clocks and do some
agenda research on this tag. Too long. :-)
So here is a solution for this need : to add a shortcut property to
entries I would like to "bookmark" and insert matching entries in the
org-clock-select-task menu. This can be done with :
* TODO Pause and drink coffee
:PROPERTIES:
:SHORTCUT: p
:END:
then C-u C-c C-x C-i p. And voil, "Pause and drink coffee" is clocked!
Here is a patch that adds a hook into org-clock-select-task and a module
that adds the shortcut feature. I tried to be the least intrusive
possible, if this proves to be useful, the hook trick might not be
needed.
Benj
TINYCHANGE
* org-agenda.el (org-agenda-get-blocks): Fix time of start/end
of events with range. This display things like:
<2011-01-22 Sat 14:00>--<2011-01-23 Sun 20:00>
correctly, with the event starting at 14:00 and ending at 20:00.
Signed-off-by: Julien Danjou <julien@danjou.info>
* lisp/org-ascii.el (org-ascii-level-start): Catch the case of levels
which do not have an equivalent in the list of underline characters.
For more information see
http://thread.gmane.org/gmane.emacs.orgmode/36097
Hi Carsten,
On Sat, Jan 8, 2011 at 11:35 PM, Carsten Dominik
<carsten.dominik@gmail.com> wrote:
> Hi Puneeth,
>
> can cou please augment the patch with a propert ChangeLog-like entry, and
> with documentation for the manual, and then resubmit?
Here is a patch with a ChangeLog entry and documentation for the
manual. Please tell me if it looks OK. Also, I hope using
git-format-patch is the right way to send this page. If not, what is
the right way?
Thanks,
Puneeth
>From 4a9be5b1a7a19c5d092ed14a86d29ad83122e9a8 Mon Sep 17 00:00:00 2001
From: Puneeth Chaganti <punchagan@gmail.com>
Date: Sun, 9 Jan 2011 00:48:51 +0530
Subject: [PATCH] Include only specified range of line numbers of a file
* doc/org.texi (Include files): Document :lines.
* lisp/org-exp.el (org-export-handle-include-files): Support :lines
property.
(org-get-file-contents): New argument lines to include specify a range
of lines to include.
On Fri, Jan 7, 2011 at 1:29 PM, Puneeth <punchagan@gmail.com> wrote:
> On Fri, Jan 7, 2011 at 10:03 AM, Venkatesh Choppella
> <venkatesh.choppella@iiit.ac.in> wrote:
>> I would like to include a part of a file (between a given range of
>> line numbers) instead of the whole file. Is there a way to do that
>> in org-mode?
>
> It isn't possible to include files using line numbers, as of now.
> Here's a quick patch that would add this feature. I have tested it
> with small files and works fine. Can somebody tell me if it looks
> good?
>
> :lines "5-10" will include the lines from 5 to 10, 10 excluded.
> :lines "-10" will include the lines from 1 to 10, 10 excluded.
> :lines "5-" will include the lines from 1 to the end of the file.
>
> HTH,
> Puneeth
Xin Shi <shixin111@gmail.com> wrote:
>
> Shr\"odinger will give the o with two dots on top. Notice that the " is a double quotation mark.
>
> However, when org translate that into LaTeX, it will become two single quotation mark! \'' (it's very hard to see the difference, but the pdf version will
> see the wrong result).
>
> Could someone tell me how to do that?
>
It works correctly in headlines, but not in running text. I think [fn:1]
that it is a bug and that the following patch fixes it:
--8<---------------cut here---------------start------------->8---
--8<---------------cut here---------------end--------------->8---
but I have not tested it extensively and it may do more harm than good:
I'd wait for a more definitive opinion.
Alternatively, you can use UTF-8 in your org file and write Schrödinger
explicitly. This will survive the LaTeX export intact and the
\usepackage[utf8]{inputenc} in the LaTeX file will do the right thing
with it.[fn:2]
Nick
Footnotes:
[fn:1] but I'm really not sure: I've lost track of how things work in
LaTeX export - sigh...
[fn:2] I'm not sure whether it will survive the email trip
though. Here's hoping that it will.
* org-latex.el (org-export-latex-make-header): Export email in
author line if `org-export-email-info' is non-nil.
Previously exporting to LaTeX would not include the document author's
email address when org-export-email-info was set. This patch corrects
this oversight using the \thanks command to add a footnote to the
author line.
On Mon, Jan 17 2011, Bernt Hansen wrote:
>
> Thanks for this patch. I think this fixes the issue I was having with
> 'j' in the agenda switching from week-view back to single-day view when
> org-agenda-ndays is set to 1.
>
> There is still a (new?) problem with jumping to today.
>
> Set the following variable
>
> (setq org-agenda-start-on-weekday 6)
>
> | Key Sequence | Notes |
> |--------------+------------------------------------------------|
> | C-c a a | Display weekly agenda |
> | f | Go forward a week |
> | d | Display day agenda |
> | . | Go to to day - but it goes to Saturday instead |
>
> This should go to today and not the first day of the week.
Attached is a fix for that.
>From f566a5612560f997f4760144ca850dda5c06bc5e Mon Sep 17 00:00:00 2001
From: Julien Danjou <julien@danjou.info>
Date: Mon, 17 Jan 2011 18:09:30 +0100
Subject: [PATCH] Fix org-agenda-goto-today not respecting the current span.
* org-agenda.el (org-agenda-goto-today): Respect current span.
Signed-off-by: Julien Danjou <julien@danjou.info>
* lisp/org-complete.el (pcomplete/org-mode/link):
(pcomplete/org-mode/todo):
(pcomplete/org-mode/prop): Copy list before uniquifying.
For a description of the bug, see
http://thread.gmane.org/gmane.emacs.orgmode/35640
* lisp/ob-tangle.el (org-babel-spec-to-string): Adding "noweb" as a
linking comment type
(org-babel-tangle-comment-links): Returns comment links for the
source code block at point
* lisp/ob.el (org-babel-expand-noweb-references): When :comments is
set to "noweb" then wrap noweb references in comment links.
* lisp/org-agenda.el (org-agenda-skip-function-global): New option.
(org-agenda-skip-eval): New function.
(org-agenda-skip): Use `org-agenda-skip-eval' and also check for the
global skipping condition.
This was a request by John Wiegley
* org-html.el (org-export-as-html): Handle timestamps after handling
links.
otherwise a link description with an ISO date is handled as an
inactive timestamp and replaced by a timestamp span.
Bug reported by Vincent Belaïche.
Carsten Dominik <carsten.dominik@gmail.com> writes:
Hi Carsten,
> is that patch on the patchwork server? If you find it, can you please
> send me the ID?
No, I cannot find it there. I'll attach it to this mail.
From 4a0fe0bfd4aafed16f658e963fc10e966601d651 Mon Sep 17 00:00:00 2001
From: Tassilo Horn <tassilo@member.fsf.org>
Date: Thu, 13 Jan 2011 19:25:04 +0100
Subject: [PATCH 3/3] * org-gnus.el (org-gnus-store-link): Don't error out if mail
has no or bogus Date: header.
Thanks to Leo Alekseyev for bringing this bug to my attention
* lisp/ob.el (org-babel-open-src-block-result): Must collect result
*before* jumping to the result buffer.
* lisp/ob.el (org-babel-temp-file): Ensure that
org-babel-temporary-directory is bound before using.
(org-babel-remove-temporary-directory): Safer error throwing.
I noticed the choices for org-export-htmlize-output-type aren't listed
in its docstring. I had to load up the customize interface to see what
the choices were.
* lisp/org-capture.el (org-capture-templates): Add %f and %F escapes
(org-capture): Add more information to capture property list
(org-capture-fill-template): Handle %f and %F escapes
* lisp/org.el (org-occur-next-match): New function.
(org-mode): Set the variable `next-error-function'.
(org-highlight-new-match): Add an `org-type' property to the overlays.
* doc/org.texi (Sparse trees): Document the next-error / previous-error
functionality.
After a sparse tree construction, `M-g n' and `M-g p' will now jump to
the location of matches.
* Makefile (LISPF): Add org-special-blocks to the list of Lisp files
* lisp/org-special-blocks.el (htmlp):
(latexp):
(line): Add defvars for dynamically scoped variables.
* lisp/org.el (org-modules): Move org-special-blocks into
the core modules section.
* lisp/org-agenda.el (org-agenda-goto): Display invisible entry text
* lisp/org-agenda.el (org-agenda-switch-to): Display invisible entry text
Visiting clock lines with RET or TAB in the agenda can put point on a
folded clock drawer. This means you are editing invisible/hidden text
inside the task entry. Now when moving to invisible regions show the
entry so point is always visible.
* lisp/org.el (org-get-category): New optional argument FORCE-REFRESH.
Automatically refresh if the property is not there.
(org-entry-properties): Remove refresh - this is now done in
org-get-category.
* lisp/org-clock.el (org-clock-insert-selection-line): Let `org-get-category'
do the property refresh.
* lisp/org-archive.el (org-archive-subtree): Force a refresh of
category properties.
Based on a patch by Julien Danjou.
* org-icalendar.el (org-print-icalendar-entries): Do not manually
refresh categories.
* org-clock.el (org-clock-insert-selection-line): Do not manually
refresh categories.
* org.el (org-get-category): Refresh categories if no category found.
(org-entry-properties): Do not manually refresh categories.
(org-prepare-agenda-buffers): Do not manually refresh categories.
It seems a very bad thing to call manually for a category refresh. It
seems better to try to refresh if we do not have a category.
Signed-off-by: Julien Danjou <julien@danjou.info>
* lisp/ob-R.el (org-babel-R-write-object-command): Force evaluation of
user code prior to the R exception-handling, so that errors in user
code are unhandled.
* lisp/org-src.el (org-src-font-lock-fontify-block): Test, early on,
that a major-mode function corresponding to the language string
exists.
Thanks to Bernt Hansen for the report and investigation.
* lisp/org-exp.el (org-export-mark-list-ending): insert additional
newline characters if end-list-marker is at a wrong position.
This solves a problem arising when exporting a region to HTML with a
list ending at the end of region. The marker would then be inserted on
the last line, following text from the list.
* lisp/ob.el (org-babel-script-escape): Replace commas with spaces for
better list reading when list items are packed with commas,
e.g. Haskell list output.
Thanks to Vladimir Alexiev for submitting this patch
* lisp/ob.el (org-babel-confirm-evaluate): Fix for the case when
org-confirm-babel-evaluate is a function (used to always ask no matter
what the function returns).
* doc/org.texi (Code evaluation security): Add example for using a
function.
These languages are capable of writing results to file; for several of
them this is their only mode of operation. These changes cause the
languages to return to ob.el either the computed result, or nil, when
they have written results to file themselves. This is in place of the
previous method of returning the output file name as a string to
ob.el.
* lisp/ob-asymptote.el (org-babel-execute:asymptote): Return nil to
signal that the intended content has been written to file.
* lisp/ob-ditaa.el (org-babel-execute:ditaa): Return nil to signal
that the intended content has been written to file.
* lisp/ob-dot.el (org-babel-execute:dot): Return nil to signal that
the intended content has been written to file.
* lisp/ob-gnuplot.el (org-babel-execute:gnuplot): Return nil to signal
that the intended content has been written to file.
* lisp/ob-latex.el (org-babel-execute:latex): Return nil to signal
that the intended content has been written to file.
* lisp/ob-mscgen.el (org-babel-execute:mscgen): Return nil to
signal that the intended content has been written to file.
* lisp/ob-octave.el (org-babel-execute:octave): Return result; not
name of output file.
* lisp/ob-plantuml.el (org-babel-execute:plantuml): Return nil to
signal that the intended content has been written to file.
* lisp/ob-python.el (org-babel-execute:python): Return result; not
name of output file.
* lisp/ob-ruby.el (org-babel-execute:ruby): Return result; not
name of output file.
* lisp/ob-sass.el (org-babel-execute:sass): Return nil if result has
been written to file
":results graphics" is now required in addition to ":file filename" in
order for graphical output to be sent automatically to file. If :file
is supplied, but not ":results graphics", then the default behavior
obtains: i.e., either "value" or "output" results are written to file,
depending on which of those options is in effect.
* lisp/ob-R.el (org-babel-R-graphical-output-file): New function
returns the name of the output file iff R has been instructed to send
graphical output to file by means of the ":results graphics"
directive.
(org-babel-expand-body:R): Use `org-babel-R-graphical-output-file'
when constructing the R code to evaluate, which may be augmented with
code implementing the writing of graohical output to file.
(org-babel-execute:R): Use `org-babel-R-graphical-output-file' to
determine whether R is taking responsibility for writing output to
file; if so, this is signalled to ob.el by returning a nil result.
* lisp/ob.el (org-babel-format-result): New function to format results
of src block execution.
(org-babel-execute-src-block): Use `org-babel-format-result' when
writing to file.
(org-babel-open-src-block-result): Use `org-babel-format-result' when
displaying results in a buffer; name results buffer differently.
* lisp/org-inlinetask.el (org-inlinetask-in-task-p): small
refactoring, do not modify match data either.
(org-inlinetask-goto-end): small refactoring, remove case-sensitivity.
(org-inlinetask-goto-beginning): small refactoring, remove case-sensitivity.
* lisp/org.el (org-before-first-heading-p): If point is on an org-mode heading line then we are not before the first heading
If point is anywhere on the first line of the first heading then we
are not before the first heading. This makes
org-before-first-heading-p returns t instead of nil when on the '*' or
blank of the first level 1 heading in an org file.
This was noticed when the first heading has an encryption
tag :crypt:. C-c C-r would not decrypt this entry if point is at the
beginning of the line since it was considered before the first
heading.
* lisp/org-timer.el (org-timer-continue-hook): Define the variable
(org-timer-pause-or-continue): Run hook after relative timer is
continued
There was a hook run when the relative timer is paused (and for most
other actions), but none for continuing afterwards.
One use for this would be to pause/continue playback in a media-player
app with the same keystroke used to pause/continue the timer.
TINYCHANGE
Patch by Christian Moe
* lisp/org-latex.el (org-export-latex-preprocess): Don't convert link
description parts that look like numeric footnote.
Fixes a problem reported by Thomas S. Dye.
* org-capture.el (org-capture-fill-template): Use `org-set-property'
directly.
* org.el (org-set-property): Split property and values reading.
(org-read-property-name, org-read-property-value)
(org-set-property-function): New functions.
(org-property-set-functions-alist): New variable.
The goal of this patch is to introduce a special variable
`org-property-set-functions-alist'. This variable allows to read
properties values in a more intelligent way from `org-set-property' or
from `org-capture'.
For that, it simplifies the `org-set-property' code and remove
duplication between `org-capture' and `org-set-property'.
Signed-off-by: Julien Danjou <julien@danjou.info>
* lisp/org.el (org-make-target-link-regexp): regexp-quote target
before replacing whitespace.
Previously a radio link <<<...>>> would match all three-letter words
in the buffer. The manual indicates the radio links are meant to
match literally (modulo whitespace differences), so we should
regexp-quote all the targets to avoid over-eager matching.
* lisp/org-latex.el (org-export-latex-first-lines): Anchor outline
regexp during LaTeX tree export
Jrg Hagmann writes:
> - If you export the (new) minimal example below to latex (C-cC-e l), it works.
> - If you only export a tree (Subtree in the example; C-cC-e 1 l), the first table ends at the horizontal line and everything between it and the next node (Subsubtree) is eliminated. The second (identical) table is exported correctly.
> - If you remove the asterisk(s) in the first table, it works.
>
> This problem crept in in the last days or weeks before 7.4.
>
> It may not be a problem for most of you, but I happen to have a number of files where columns are automatically displayed as tables preceding the first subnode (#+BEGIN: columnview ...). An alternative would be to display %ITEM in column-view without the asterisks.
>
> Emacs 23.2.1 on OS X 10.6.5
> Org-mode version 7.4 (release_7.4.24.g48b11.dirty)
>
> Thanks, Jrg
>
> -------New minimal example------------
> * Subtree
>
>
> | One | Two | Three |
> |--------+------+-------|
> | * Test | text | text |
> | ** One | text | text |
>
>
> Some text
>
> ** Subsubtree
>
> | One | Two | Three |
> |--------+------+-------|
> | * Test | text | text |
> | ** One | text | text |
* lisp/ob-python.el (org-babel-python-initiate-session-by-key): Make
sure that py-which-bufname is initialized, as otherwise it will be
overwritten the first time a Python buffer is created.
* lisp/org.el: (org-entry-properties) Stop scanning for timestamps if
a specific timestamp property (e.g., DEADLINE, SCHEDULED, etc.) is
requested and a match is found. Also, if a specific timestamp property
is requested, do not push non-relevant timestamps onto property list.
This change only effects org-entry-properties when a specific
timestamp is requested with the special flag, as in:
(org-entry-properties nil 'special "SCHEDULED")
Previously, even if only the SCHEDULED timestamp was requested,
org-entry-properties would parse all the timestamps in an entry. This
extra parsing could slow down the construction of agenda views,
especially with entries that contained a large number of log
items (CLOCK, state changes, etc.). The function org-entry-get,
however, is only interested in the first occurrence of the item. When
looking for a specific type of timestamp, org-entry-properties now
stops searching for timestamps after the match is found, unless the
property is "CLOCK".
Here are the relevant ELP results:
Before:
org-entry-get 296 0.4724579999 0.0015961418
org-entry-properties 31 0.3438769999 0.0110928064
After:
org-entry-get 296 0.1447729999 0.0004890979
org-entry-properties 31 0.015765 0.0005085483
* lisp/org-agenda.el: (org-agenda-get-scheduled) Don't call
org-is-habit-p until after checking for for
org-agenda-skip-scheduled-if-done.
Org-agenda-get-scheduled was calling org-is-habit-p on every scheduled
item (including DONE items when org-agenda-skip-scheduled-if-done was
set to t). Tweaking the timing of the test shaves some time off of
agenda construction when org-habit is loaded and
org-agenda-skip-scheduled-if-done is t.
Before: org-is-habit-p 478 0.2434439999 0.0005092970
After: org-is-habit-p 81 0.057944 0.0007153580
* org.el: remove spurious linebreak introduced by earlier patch
* ob.el, ob-ref.el: remove double fix of the same problem
Achim Gratz <Stromeko@Stromeko.DE> wrote:
> this patch had already been partially applied by Carsten and Eric (in
> slightly a different way than I suggested). The changes to ob.el and
> ob-ref.el (the require statements) are therefore superfluous and should
> probably be backed out. There was also a superfluous whitespace change
> in org.el (a closing paren that was broken onto the next line). Patch
> to this effect is attached. You've already cleaned up org-agenda.el and
> the conditions in org-macs...
* lisp/org-html.el (org-export-html-mathjax-template): displaymath
environment and MathJax
Greetings All.
The following patch makes MathJax consider \begin{displaymath} and
\end{displaymath} as math environmetn boundaries. For someone who, like
me, keeps "The not so short introduction to LaTeX2e" alway around, the
displaymath environment is the default way to introduce a block of math.
In fact '\[' and '\]' are also mentioned there but the environment is
used in every single example so the patch minimizes the surprise.
* lisp/org-faces.el (org-agenda-current-time): New face.
* lisp/org-agenda.el (org-agenda-show-current-time-in-grid):
(org-agenda-current-time-string): New options.
(org-agenda-add-time-grid-maybe): Add current time to time grid.
suvayu ali <fatkasuvayu+linux@gmail.com> writes:
> I actually tried to set the text properties for the string instead,
> but looks like org-agenda is ignoring that.
>
> (defun jd:org-current-time ()
> "Return current-time if date is today."
> (when (equal date (calendar-current-date))
> (propertize (format-time-string "%H:%M Current time") 'font-lock-face
> '(:weight bold :foreground "DodgerBlue4" :background "snow"))))
To accomplish this you'd have to apply the following patch and use 'face
property rather than font-lock-face.
Why can't a sexp choose its 'face after all?
--8<---------------cut here---------------start------------->8---
--8<---------------cut here---------------end--------------->8---
* org-footnote.el (org-footnote-create-definition): Place Footnotes
section before message-signature-separator also in modes derived
from message-mode.
* lisp/org-list.el (org-list-top-point-with-indent,
org-list-bottom-point-with-indent): Pay also attention to
'original-indentation property of text, as blocks are put to column
0 upon exporting.
* lisp/ob.el (org-babel-remove-temporary-directory): Handle exception
with message informing of failure to remove directory.
Thanks to Antti Kaihola for the bug report:
http://thread.gmane.org/gmane.emacs.orgmode/34394
From: Antti Kaihola <akaihola <at> gmail.com>
Subject: Can't close Emacs+org-mode if /tmp and /home on different partitions
Newsgroups: gmane.emacs.orgmode
Date: 2010-12-02 08:33:28 GMT (6 days, 1 hour and 22 minutes ago)
I have /tmp on my root partition and a separate partition for /home.
When trying to close an Emacs session which is using org-mode, I get
this error:
move-file-to-trash: Non-regular file: Is a directory, /tmp/babel-XXXXXXX
(where XXXXXXX are random characters).
I tracked down the problem to org-babel-remove-temporary-directory
which ob.el adds to kill-emacs-hook. It tries to remove the temporary
directory using delete-directory, which in turn tries to move the
directory (by renaming) into trash, which is in my home directory.
I added this to my ~/.emacs.d/init.el:
(custom-set-variables '(temporary-file-directory "/home/akaihola/tmp/"))
and closing Emacs works correctly again. However, since my init.el is
part of emacs-starter-kit which I update frequently, I'd prefer not to
modify that file. Unfortunately the customization hook
emacs-starter-kit provides (~/.emacs.d/custom.el) is loaded too late
to affect the temporary directory.
I'm running emacs-snapshot 1:20090909-1 in Ubuntu 10.10. Looks like
this is really an Emacs bug and is already fixed:
http://groups.google.com/group/gnu.emacs.bug/browse_thread/thread/0446b8684a8ef504
* lisp/ob-clojure.el (org-babel-header-arg-names:clojure): Adding
`package' to the list of Clojure header arguments which will be read
from heading properties.
* lisp/org-inlinetask.el (org-inlinetask-export-templates): added
Sébastien Vauban's suggestion for LaTeX export in docstring. This is
not default as it requires an additional LaTeX package: "todonotes".
* org-inlinetask.el (org-inlinetask-export-templates): new variable
* org-inlinetask.el (org-inlinetask-export-handler): make use of
templates to export inline tasks
* org-inlinetask.el (org-inlinetask-outline-regexp): new function
* org-inlinetask.el (org-inlinetask-goto-beginning): new function
* org-inlinetask.el (org-inlinetask-goto-end): new function
* org.el (org-mark-subtree): new command
* org.el (org-speed-commands-default, org-mode-map): make use of new command
This reverts commit 383802d063.
The commit had org-mode process the headlines from bottom to top, which
meant that any changes to the visibility of lower headlines were
overridden/modified by changes higher up the tree. Reverting the commit
causes VISIBILITY to work correctly.
* lisp/org.el: (org-make-heading-search-string) Optionally limit
number of lines stored in file link search strings.
(org-context-in-file-links) Add option to set to integer specifying
number of lines.
B S will cause tasks to be rescheduled a random number of days into the
future, with 7 as the default. This is useful if you've got a ton of
tasks scheduled for today, you realize you'll never deal with them all,
and you just want them to be distributed across the next N days.
* org-agenda.el (org-agenda-custom-commands-local-options):
Allow org-agenda-span to be a symbol.
(org-agenda-ndays): Make obsolete.
(org-agenda-span): New variable superseding org-agenda-ndays.
(org-agenda-menu): Use org-agenda-current-span.
(org-agenda-current-span): New local variable storing current
span.
(org-agenda-list): Take a span instead of ndays as argument.
This function is now responsible for computing the ndays based
on span.
(org-agenda-ndays-to-span): Return span only if number of days
really matches.
(org-agenda-span-to-ndays): New function.
(org-agenda-manipulate-query): Use org-agenda-compute-starting-span.
(org-agenda-goto-today): Use org-agenda-compute-starting-span.
(org-agenda-later): Do not give compute a new span, use the
current one.
(org-agenda-day-view, org-agenda-week-view)
(org-agenda-month-view, org-agenda-year-view): Stop touching
org-agenda-ndays.
(org-agenda-change-time-span): Only compute starting-span.
(org-agenda-compute-starting-span): New function derived from
the old org-agenda-compute-time-span.
(org-agenda-set-mode-name): Compute mode based on
org-agenda-current-span.
(org-agenda-span-name): New function.
* org-mouse.el: Replace Replace org-agenda-ndays by
org-agenda-current-span.
* org.texi, orgguide.texi: Replace org-agenda-ndays by
org-agenda-span. Add a paragraph about org-agenda-span and say that
org-agenda-ndays is now deprecated.
This patch is pretty huge, so I'll give a bit of context about it.
I'm weird, but I used org-agenda-ndays set to 14. Unfortunately, this
settings was interpreted as a month view. Pressing 'f' key to see later,
would show me the next month, which was not at all what I wanted.
On the same idea, day view or week view would change my org-agenda-ndays
settings, which I think is not a good idea. Changing user setting is *bad*.
:-)
So I rewrote the things this way:
- Rename org-agenda-span to org-agenda-current-span
Which has the same meaning has before, except it can be numeric.
- Rename org-agenda-ndays to org-agenda-span
I think the name is better choosen. You can set it to a symbol instead of
only a numeric value. That means you can set it to 'month and it will show
you the number of days of the current month in your agenda. Better than
30. But you can still set it to 30, or 31, or whatever you want.
- Do not change org-agenda-span. Never.
- Use org-agenda-current-span for navigation.
That means if you press 'f', it will shows you really the next
org-agenda-current-span ndays, and not something based on "I think you
want a weekly view".
* lisp/org-agenda.el: (org-format-agenda-item) The value of
org-category is not converted to a string unless it is defined.
This fixes commit 3061c7083d, which
resulted in org-format-agenda-item always returning the symbol-name for
org-category even if it was not defined. I.e., in some instances,
org-format-agenda-item returned the string "nil", thus bypassing the
buffer-file-name method of deriving the category.
* lisp/ob-python.el (org-babel-execute:python): Pass the new "prefix"
header argument through to external evaluation.
(org-babel-python-evaluate): Pass the new "prefix" header argument
through to external evaluation.
(org-babel-python-evaluate-external-process): When specified prepend
"prefix" to the file used in external evaluation.
* lisp/ob-sql.el (org-babel-expand-body:sql): Expand the body of a sql
code block.
(org-babel-execute:sql): Use sql specific body expansion function.
(org-babel-sql-expand-vars): Insert variables into a sql code block.
* lisp/ob-sqlite.el (org-babel-execute:sqlite): Remove unused variable
declaration.
* lisp/org-clock.el (org-day-of-week): New function.
(org-quarter-to-date): New function.
(org-clock-special-range): Implement quarters.
Patch by Erwin Vrolijk
* org-agenda.el (org-format-agenda-item): Convert category to a string
if it is a symbol. This fixes the following call to
org-agenda-get-category-icon which fails if category is not a string.
Signed-off-by: Julien Danjou <julien@danjou.info>
* lisp/ob-clojure.el: Updated requirements documentation to mention
the minimum version of Clojure.
(org-babel-expand-body:clojure): Fully qualified function name.
* lisp/org-latex.el (org-export-latex-lists): do not add an
unnecessary newline character after a list.
* lisp/org-list.el (org-list-bottom-point-with-indent): ensure bottom
point is just after a non blank line.
* lisp/ob-python.el (org-babel-execute:python): Use a :return header
argument for external evaluation in which the code block body need
be wrapped in a function
Thanks to Darlan Cavalcante for proposing this feature.
* lisp/ob-clojure.el (org-babel-execute:clojure): Remade using slime
for all code evaluation.
(org-babel-expand-body:clojure): Remade in the image of
`org-babel-expand-body:emacs-lisp'.
* lisp/org-beamer.el (org-beamer-sectioning): Allow overlay arguments for
the column as well.
* doc/org.texi (Beamer class export): Document that also overlay arguments
can be passed to the column environment.
Eric Fraga writes:
> I am trying to create a beamer slide which has two columns. The second
> column should only appear after a while (the 6th uncovering operation).
> In latex, I would do:
>
> : \begin{column}<6->{0.4\textwidth}
>
> say. In org, I would expect to be able to get this latex code generated
> by the following:
>
> --8<---------------cut here---------------start------------->8---
> ***** column heading :BMCOL:B_block:
> :PROPERTIES:
> :BEAMER_col: 0.4
> :BEAMER_envargs: c<6->
> :BEAMER_extra:
> :BEAMER_env: block
> :END:
> --8<---------------cut here---------------end--------------->8---
>
> according to the info documentation (Beamer class export).
>
> However, this does not work: the "c<6->" is placed verbatim in
> the \begin{block} that comes after the \begin{column}. Furthermore, if
> I ask for the heading to be ignored (instead of defining a block), the
> envargs are lost completely!
* doc/org.texi (Template elements): Document the new entry type.
* lisp/org-capture.el (org-capture-templates): Add new option to customize
type and docstring.
(org-capture-set-target-location): Interpret the file+datetree+prompt
entry.
* lisp/ob.el (org-babel-insert-result): Responds to new "wrap" header
argument.
(org-babel-merge-params): Includes new "wrap" header argument in
one of the results header argument exclusive groups.
* lisp/org.el (org-additional-option-like-keywords): Fontify begin and
and results lines as comments.
Thanks to Charles C. Berry for insisting on this issues existence
This change is now secured with a unit test
* lisp/ob.el (org-babel-parse-header-arguments): Stripping trailing
spaces off of header arguments (even the first one).
* lisp/ob-sh.el (org-babel-sh-var-to-sh): Wrap end token of heredoc in
single quotes which is the best practice.
(org-babel-sh-table-or-results): Use `org-babel-script-escape' for
more robust parsing of shell output.
* lisp/ob-eval.el (org-babel-error-buffer-name): Define new variable.
(org-babel-eval-error-notify): Use new variable `org-babel-error-buffer-name'
(org-babel-eval): Make temp error buffer invisible to the user with
initial space in name.
(org-babel-eval-wipe-error-buffer): New function to wipe the error message buffer.
* lisp/ob-exp.el (org-babel-eval-wipe-error-buffer): Declare external function
`org-babel-eval-wipe-error-buffer'.
(org-babel-exp-results): Wipe error buffer clean at outset of execution
* lisp/ob.el (org-babel-execute-src-block-maybe): Wipe error buffer clean at
outset of execution
(org-babel-eval-wipe-error-buffer): Declare external function
`org-babel-eval-wipe-error-buffer'.
* lisp/ob-python.el (org-babel-python-table-or-string): Using
`org-babel-script-escape' for reading string input from scripting
languages.
* lisp/ob-ruby.el (org-babel-ruby-table-or-string): Using
`org-babel-script-escape' for reading string input from scripting
languages.
* lisp/ob.el (org-babel-script-escape): Using
`org-babel-script-escape' for reading string input from scripting
languages.
* lisp/ob-haskell.el (org-babel-haskell-table-or-string): Using
`org-babel-script-escape' for reading string input from scripting
languages.
* lisp/org-latex.el (org-export-latex-make-header): Run the title through
`org-export-latex-fontify-headline'.
(org-export-latex-fontify-headline): Do the protection of math
snippets also here
* lisp/org-latex.el (org-export-as-latex): Sent the section title
through the preprocessor.
Hi all,
This patch fixes the issue I originally described here:
http://article.gmane.org/gmane.emacs.orgmode/32281
It preserves math-mode delimiters (e.g. "$" and "\(") in the document
title when exporting to LaTeX. (That is, it prevents them from being
escaped, by running the title through org-export-preprocess-string,
which marks them with the org-protected property.) It should work
regardless of whether the title is pulled from a headline, from the text
before the first headline, or from an explicit #+TITLE declaration.
(This is my first time contributing a patch to a Free Software project
-- so please, let me know what you think!)
Best,
Richard
* lisp/org.el (org-open-at-point): Don't do footnote action if cursor is
on a bracket link.
Sebastian Mengin writes:
> Hi,
>
> Consider the following minimal example:
>
> Text[fn:1]
>
> * Footnotes
> [fn:1] Note with a [[file:abecedaire.jpg][link]].
>
> Here with orgmode 7.02, doing C-c C-o on the link moves the cursor on
> [fn:1] and says in the minibuffer: "Position saved mark to ring, go back
> with C-c &", instead of opening the linked file.
>
> Is this a bug?
>
* lisp/org-clock.el (org-get-clocktable)
previous patch incorrectly required whitespace in front of #+BEGIN: and #+END:
TINYCHANGE - This patch is in the public domain.
* lisp/org-src.el (org-edit-src-code): Allow region to be inherited by
edit buffer when mark is one character beyond end of src block.
Thanks to Jambunathan K. for the bug report:
C-c C-v C-M-h and C-c C-v C-x interaction
In the block below do
1. C-c C-v C-M-h, C-c C-v C-x C-M-\
2. Mark (just) the code-block with C-SPC etc etc. C-c C-v C-x C-M-\
See the difference in behaviour.
<text:p text:style-name="Standard">This is a xref to
<text:bookmark-ref text:reference-format="text"
text:ref-name="__RefHeading__1669_1684552201">Heading8
</text:bookmark-ref>.</text:p>
I have transient mark mode on.
Thanks to Nicolas Goaziou for pointing this out
* lisp/ob-ref.el (org-babel-ref-at-ref-p): Use higher level function
for testing list membership.
* lisp/ob.el (org-babel-read-result): Use higher level function for
testing list membership.
(org-babel-result-end): Use higher level function for testing list
membership.
* lisp/ob-sqlite.el (ob-eval): require ob-eval for external command
execution
(org-babel-execute:sqlite): no longer uses the init option for
passing commands to sqlite
* lisp/org.el (org-indent-line-function): drawers and blocks have no
influence on indentation of text below. Also fix indentation problem
with a block at column 0 and add a special case for literal examples.
* lisp/ob-ref.el (org-babel-ref-resolve): Recognize `list' as a unique
type of data
(org-babel-ref-at-ref-p): Recognize `list' as a unique type of data
* lisp/ob.el (org-babel-read-result): Recognize `list' as a unique
type of data
(org-babel-read-list): A function to read a textual Org-mode list
into an emacs-lisp list.
(org-babel-insert-result): Recognizes the "list" result param to
insert data as an Org-mode list.
(org-babel-result-end): Find the end of an Org-mode list.
(org-babel-merge-params): Add "list" as a result param.
* doc/org.texi (results): Documentation of the new "list" results
header argument.
* lisp/org-table.el (orgtbl-after-send-table-hook): New hook.
(orgtbl-ctrl-c-ctrl-c): Run `orgtbl-after-send-table-hook' when a
table was sent.
(orgtbl-send-table): Return the number of sent tables, or nil if no
sending has happened.
Patch by Seweryn Kokot. TINYCHANGE
* lisp/org-clock.el (org-get-clocktable):
(org-in-clocktable-p):
(org-clocktable-shift):
(org-clocktable-steps): Fix regexp to allow for indented clock tables
#+BEGIN: and #+END: were expected only at the first column in some
places.
#BEGIN: and #END: were erroneously recognized inside normal lines in
other instances.
always allow whitespace after #BEGIN: and #END:, not just a single space
TINYCHANGE - This patch is in the public domain.
Matt Lundin
Carsten Dominik
Eric Schulte
Benjamin Drieu
Julien Danjou
Dan Davison
Bastien Guerry
Puneeth Chaganti
Nick Dokos
Lawrence Mitchell
David Maus
Tassilo Horn
Jason Dunsmore
niels giesen
Bernt Hansen
John Wiegley
Nicolas Goaziou
Charles Sebold
Konrad Hinsen
Achim Gratz
Łukasz Stelmach
Robert Pluim
Sébastien Vauban
Allen S. Rout
Richard Lawrence
Achim Gratz