This commit adds a key (`C-c C-x o') to toggle the ORDERED property of
a tree. And it adds menu entries for doing this, which also reflect
the current state of the tree.
The variables =org-agenda-todo-ignore-with-date=,
=org-agenda-todo-ignore-with-date=, and
=org-agenda-todo-ignore-with-date= make it possible to
exclude TODO entries which have this kind of planning info
associated with them. This is most useful for people who
schedule everything, and who use the TODO list mainly to find
things that are not yet scheduled. Thomas Morgan pointed out
that also the tags-todo search may serve exactly this
purpose, and that it might be good to have a way to make
these variables also apply to the tags-todo search. I can
see than, but could not convince myself to make this the
default. A new variable must be set to make this happen:
=org-agenda-tags-todo-honor-ignore-options=.
Formulas can now refer to fields and regions in other tables, be it in
the same file or even in different files.
This also opens the door for more interesting R support, because
arbitrary tables in a file can now be accessed with appropriate
commands.
Finally, this commit also introduces a convenience for creating
references in tables. For the purpose of references, it will always
be *assumed* that there is another hline at the end if each table. So
for example in a table that has only a single hline, to separate
header from data, you can now access all of column two with
"@I$2..@II$2".
The conversion commands `C-c -' and `C-c *' are now better
behaved and therefore more useful, I hope.
If there is an active region, these commands will act on the
region, otherwise on the current line.
- C-c - :: This command turns headings or normal lines into
items, or items into normal lines. When there is a
region, everything depends on the first line of the
region:
- if it is a item, turn all items in the region into
normal lines.
- if it is a headline, turn all headlines in the region
into items.
- if it is a normal line, turn all lines into items.
- special case: if there is no active region and the
current line is an item, cycle the bullet type of the
current list.
- C-c * :: This command turns items and normal lines into
headings, or headings into normal lines. When there is
a region, everything depends on the first line of the
region:
- if it is a item, turn all items in the region into
headlines.
- if it is a headline, turn all headlines in the region
into normal lines.
- if it is a normal line, turn all lines into headlines.
The directory used for attachments to an entry is by default chosen
automatically, with a name derived from the entry ID to make sure it
is unique.
However, in some cases it may be better to assign a user-chosen
directory to and entry, to be used for attachments. This commits
implements this change. See the documentation changes for information
on how things work.
Thanks to Jason Jackson for pushing this part.
The second change made bu this commit is that it is now possible to
inherit the attachment directory from a parent, so that an entire
project subtree can use a single directory.
Two new variables, `org-export-html-inline-image-extensions' and
`org-export-latex-inline-image-extensions' now define the file
extensions that will be considered for inlining images. The default
for HTML is png, jpg, jpeg, and gif files. The default for LaTeX is
png, jpg, jpeg, and pdf, assuming processing with `pdflatex'.
For LaTeX export, this can lead to conflicts for links that point
to non-image PDF files. To avoid that such a link will be inlined by
accident, always give a description text for such a link, one that is
not equal to the path.
Lines preceded by a colon are treated as fixed-width examples.
This commit improves the moment when the protection of these lines
happens during preprocessing. And it enforces that a space must
follow the colon for the line to be treated in this way.
When including s file in example or src markup, you can now also
specify the switches for code references and line numbering that work
also when directly adding SRC or EXAMPLE blocks.
Reported by Manish.
The relative timer is now shown in the mode-line while running.
There is a new command to pause and continue it.
Thanks to Alan Davis for driving this change.
This commit add a new face for footnote labels, and activates footnote
labels for mouse clicks and for `C-c C-o', to jump to the
corresponding reference or definition.
This patch implements fully automatic creation of unique labels for
footnotes, which is also turned on as the default setting. The
automatic labels look like [fn:1], [fn:2], etc, using the first
available unused number.
The commit introduces a new variable, `org-footnote-auto-label' with a
number of different options ranging from no auto creation (prompting
the user for a label) to fully automatic creation.
Also, the commit introduces new #+STARTUP options that can be used to
select these settings on a per-file basis.
Setting org-footnote-section to nil now causes definitions to be
inserted at the end of the current outline node, instead of into a
special node names "Footnotes".
This patch introduces more hooks for preprocessing the export buffer,
at various strategic moments. See the Changes.org file for a
description of the hooks.
The dynamic block capturing column view has an :id parameter that does
select from where the column view should be captured. The routine
searching for this entry so far only searched the current file, now it
uses the full ID API to find the entry also in another file.
Furthermore, a value "file:path/to/file.org" will capture the global
column view of that file.
Report by Francois Lagarde.
Yesterday I pushed Org 6.16 into the Emacs CVS trunk, so we will see
this version when Emacs 23 gets released. Unless, of course, the
release is delayed and we can install more updates later.
Exporting tables to LaTeX suffered from the problem that Org tables
are often long, but that the tabular environment in LaTeX cannot
handle long tables. This patch fixes this issue.
LaTeX export can now deal with very long tables, by setting an option
in the "ATTR_LaTeX:" line. Also, you can specify the alignment by
hand. Here is an example:
Also, table export now correctly deals with tables that start with a
hline. In such a case, also the LaTeX version will have this extra
hline before the first line.
Unique identifiers for entries can now be used more efficiently.
Internally, a hash array has replaced the alist used so far to
keep track of the files in which an ID is defined. This makes it
quite fast to find an entry by ID.
There is now a new link type which looks like this:
id:GLOBALLY-UNIQUE-IDENTIFIER
This link points to a specific entry. When you move the entry to
a different file, for example if you move it to an archive
file, this link will continue to work.
The file /org-id.el/ contains an API that can be used to write
code using these identifiers, including creating IDs and finding
them wherever they are.
Org has its own method to create unique identifiers, but if the
system has /uuidgen/ command installed (Mac's and Linux systems
generally do), it will be used by default. You an also select
the method by hand, using the variable =org-id-method=.
If the ID system ever gets confused about where a certain ID is,
it initiates a global scan of all agenda files with associated
archives, all files previously known containing any IDs, and all
currently visited Org-mode files to rebuild the hash. You can
also initiate this by hand: =M-x org-id-update-id-locations=.
Running this command will also dump into the =*Messages*= buffer
information about any duplicate IDs. These should not exist, but
if you /copy/ an entry with its properties, duplicate IDs will
inevitably be produced. This is unavoidable in a plain text
system that allows you to edit the text in arbitrary ways, and a
portion of care on your side is needed to keep this system clean.
The hash is stored in the file =~/.emacs.d/.org-id-locations=.
This is also a change from previous versions where the file was
=~/.org=id-locations=. Therefore, you can remove this old file
if you have it. I am not sure what will happen if the =.emacs.d=
directory does not exists in your setup, but in modern Emacsen, I
believe it should exist. If you do not want to use IDs across
files, you can avoid the overhead with tracking IDs by
customizing the variable =org-id-track-globally=. IDs can then
still be used for links inside a single file.
IDs will also be used when you create a new link to an Org-mode
buffer. If you use =org-store-link= (normally at =C-c l=) inside
en entry in an Org-mode buffer, and ID property will be created
if it does not exist, and the stored link will be an =id:= link.
If you prefer the much less secure linking to headline text, you
can configure the variable =org-link-to-org-use-id=. The default
setting for this variable is =create-if-interactive=, meaning
that an ID will be created when you store a link interactively,
but not if you happen to be in an Org-mode file while you create
a remember note (which usually has a link to the place where you
were when starting remember).
The old syntax for setting HTML link attributes is no longer
supported. Existing links will not fail, but the attributes specified
in the old way will be ignored.
Tables, and Hyperlinks that represent inlined images, can now be
equipped with additional information that will be used during
export. The information will be taken from the following special
lines in the buffer and apply to the first following table or
link.
- #+CAPTION: :: The caption of the image or table. This string
should be processed according to the export backend, but
this is not yet done.
- #+LABEL: :: A label to identify the figure/table for cross
references. For HTML export, this string will become the
ID for the `<div class="figure">' element that encapsulates
the image tag and the caption. For LaTeX export, this
string will be used as the argument of a `\label{...}'
macro. These lables will be available for internal links
like `[[label][Table] ]'.
- #+ATTR_HTML: :: Attributes for HTML export of image, to be
added as attributes into the `<img...>' tag. This string
will not be processed, so it should have immediately the
right format.
- #+ATTR_LaTeX: :: Attributes for LaTeX export of images, to
be inserted into the optional argument of the
`\includegraphics[...]{file}' command, to specify scaling,
clipping and other options. This string will not be
processed, so it should have immediately the right
format, like `width=5cm,angle=90'
For LaTeX export, if either a caption or a label is given, the
element will be exported as a float, i.e. wrapped into a figure
or table environment.
Carsten Dominik