The width and alignment in table columns can be set with a cookie like
"<10>" or "<r>" or "<r10>". In order to keep Org from exporting such
lines, the first column of a line can contain only "/". However, for
convenience, this commit implements a special case: If the entire row
contains only sch markers, the line will automatically be discarded
during export.
The new keys are b and f. This used to be on the cursor keys, but
they do now again do cursor motion.
This is a significant change in the UI, I hope this will not cause too
many problems.
A relative row reference like @-1 in a table may now reach across a
horizontal separator line. I hope this will not break any important
tables out there, but I think it is the right thing to do.
The original reason for not-crossing was to implement running
averages of one column in the next. This can now be done using field
formulas near the beginning and end of the column, and a column
formula for the central part.
See the variable `org-table-relative-ref-may-cross-hline' for more
details.
Using :timetamp t as an option in a clock report now allows
insertion of the timestamp for the clocked entry. Timestamps
are searched for in this order: SCHEDULING, TIMESTAMP, DEADLINE
and TIMESTAMP_IA.
Allow whitespace in code references. Allow the -r switch to remove the
references in the source code even when the lines are not numbered: the
labels can be explicit enough. Note that "-r -k" is the same than no
switch - as expected.
Thanks to Ulf Stegemann for bring this up.
This hook is called in org-clock-in earlier than the existing
org-clock-in-hook. This is useful for functions that need to
modify the Effort property, for example.
When changing the publishing setup, old timestamp files can be left
behind. Forcing publishing of all projects with `C-u C-c C-e E'
will remove all existing timestamp files.
Many different people want to set many different variables in a
buffer-local way for export. This cannot be done with file variables,
because the Org buffer is not current while the exporter is running.
Lots of variables can be set with the #+OPTIONS lines, but finding
abbreviations goes only so far.
Therefore we have now a general mechanism that can be used to bind
variables during export operations.
a line like: #+BIND: variable value
will bind the variable to value. For example,
the line
>> #+OPTIONS: toc:nil
can now equivalently be written as
>> #+BIND: org-export-with-toc nil
Customize the new variable org-footnote-auto-adjust or use the STARTUP
option fnadjust to get automatic renumbering and sorting of footnotes
after each insertion/deletion.
Agenda bulk commands on marked entries now can also set the scheduling
date or a deadline. Normally, all entries will be set to the
specified date. However, when writing the change as "++5d" or "++2w",
then each time stamp will independently be shifted by that amount.
TAB now cycles visibility in plain lists if the cursor is in a plain
list. This corresponds now to the new default value `t' of
`org-cycle-include-plain-lists'. If you want to treat plain list
items as part of the outline hierarchy during cycling of outline
headings (this is what a `t' value used to mean), set this variable to
`integrate'.
This commit implements refiling directly from the agenda.
It also implements a mechanism for selecting a number of entries in
the agenda and then executing a command on all of them. Possible
actions include archive, refile, todo state setting, and more.
Michael Brand writes:
> 2) One could like to have configurable left/right alignment, even
> combinable with column width, e. g.
>
> | <l10> | <r> |
> | 3.14 | 0x10 |
> | 3.141592=> | 0x32 0x10 |
Good idea, I would say.
Clicking on the clock in the mode line now pops up a menu with
clocking options.
A new command `C-c C-x C-e' allows to set or change the effort
estimate of the task currently being clocked. This is mainly useful
when using an alert notification when the task should be finished.
Based on a patch by Konstantin Antipin.
This commit changes which time is shown in the mode line while
clocking. Normally this will now be the total time ever clocked on
this task and its children.
However, when the task is a repeating one, only the time since the
last reset of the task will be shown. The time of the last reset is
now recorded in a LAST_REPEAT property.
You can also set the CLOCK_MODELINE_TOTAL property to the value
"current" to only show the current clocking instance. Or it may be
the value "today", to only add up the time spent today on this task.
Other possible values are "repeat", "all", or "auto".
Finally, you can set your default for this property with
`org-clock-modeline-total'.
This commit introduces two new variables:
- org-treat-insert-todo-heading-as-state-change
Default is nil. When set to t, adding a new TODO item will be done
by adding an item and the executing an "official" state change which
potentially will trigger state logging.
- org-treat-S-cursor-todo-seletion-as-state-change
Default is t. When set to nil, selecting a TODO state with
S-left/right will not trigger logging, only selecting a new state
with `C-c C-t'. I actually like this a lot and would even consider
making this the default.
Mikael Fornius writes:
> This is my suggestion of an implementation of min/mean/max computation
> in columnview summaries. If you like it feel free to use it.
>
> New operators: {min}, {max} and {mean} possibly prefixed with : for use
> with timevalues.
>
> Example from my running exercise diary:
>
> #+COLUMNS: %DISTANCE{+;%.1f} %HEARTRATE{mean;%.1f} %SPEED{:min} %CALORIES{+}
>
> Gives a colview with summaries:
>
> total distance, mean heartrate, fastest speed (min/km) and total
> calories.
>
> I have tested it on emacs-23 and it works well for me now, also with the
> interactive colview functions.
>
> But you never know really. ;-) Anyway, there should not be any emacs-23
> specific elisp code added afik.
>
> (Because I do not use xemacs I have not tested it with xemacs but the
> small changes I made should be compitable to both xemacs and emacs. I
> would appreciate if someone on this list who uses xemacs will give it a
> try for me. Thanks!)
>
> (This fix also opens up for using user defined lisp functions to
> calculate colview summaries, but I am not sure if that is something
> useful. Like this:
>
> (defun std (&rest values)
> "Compute standard deviation."
> ...)
>
> #+COLUMNS: %DATA{eval:std}
>
> If someone finds this attractive it would now be easy to implement as well.)
>
Hsiu-Khuern Tang writes:
> Hi Carsten,
>
> You recently changed org-edit-src-code to use a separate buffer
> instead of an indirect buffer. One side effect of this is that I
> can no longer edit several code examples at the same time:
> opening the second buffer will silently discard any changes made
> in the first. I would prefer this behavior: when opening the
> second edit source buffer, write any changes in the first buffer
> to the originating Org buffer (but don't save it, of course).
>
> Another approach is to use different buffer names.
The better approach is clearly to allow several buffers, now
implemented with this commit.
There is now a new export function, `org-export-as-org', which
basically creates a copy of the Org file with things like archived
trees, commented trees, and trees deselected by export tags,
stripped.
This commit adds:
{{{date(FORMAT)}}} current date/time, formatted with
`format-time-string'
{{{modification-time(FORMAT)}}} date/time of last modification of
file, formatted with `format-time-string'
{{{input-file}}} the file name of the source Org file.
Carsten Dominik
Bastien Guerry
John Wiegley
Bernt Hansen