The relative timer is now shown in the mode-line while running.
There is a new command to pause and continue it.
Thanks to Alan Davis for driving this change.
The variable `org-blank-before-new-entry' regulates if Org should
insert a blank line before a new entry, when making a new headline or
plain list item. Up to now, the possible values in each case where t
or nil, i.e. unconditionally do or don't insert a blank line.
Now each setting can also be `auto'. If this is the case, Org will
look if the current entry, of which the command creates a sibling,
does have a blank line before it. If yes, it will also make a blank
line. If not, it will not. This seems so useful that I have made
this behavior the default.
Bernt Hansen writes:
I've been bad and let a couple of my overhead tasks slip past
their deadline dates.
*** TODO Q1 Accounting: October
DEADLINE: <2008-11-30 Mon +1y>
- CLOSING NOTE [2008-01-30 Wed 12:18]
This task does not show up on my agenda anymore (probably because
the year changed). If I change the deadline entry to this:
DEADLINE: <2008-11-30 Mon>
then it shows up as 37 days late. I'm bringing this up as soon as
I noticed it just so people are aware of this. I have a few of
these tasks that just dropped off my agenda (probably at the
beginning of the year).
This interesting bug seems only to happen when the repeat is yearly,
and after crossing the December 31st year boundary. It was a sorting
issue - Org-mode (in the function `org-closest-date') computes two
dates that are consistent with the repeater, one before and one after
the target date. When the computation is done with a preference for
the past date (as it happens for deadlines), it should use the earlier
date. In fact, it did choose "n1", assuming that it was the earlier
one. This assumption does hold for daily, weekly and monthly
repeaters, but not for yearly ones.
This commits make sure that "n1" always holds the earlier date, so
that the logic at the end of the function works again.
This commit removes some of the stuff that was specific for the LaTeX
exporter, and falls back to the default configuration that works for
all backends.
Here is what the commit does:
- The variable `org-export-latex-remove-from-headlines' is now
obsolete. Instead, also LaTeX export now responds to the settings
in the variables org-export-with-todo-keywords',
`org-export-with-priority', and `org-export-with-tags' and in the
corresponding OPTION settings.
- Removal of time stamps and related keywords now already happens in
the preprocessor, so that it will be perfectly the same for all
backends.
- The list functions have been extended to accept an additional
parameter list, to overrule the default setting for a particular
list function. This is used to make the checkbox appearance in
LaTeX configurable, through the new variable
`org-export-latex-list-parameters'.
Column view could fail when the agenda contains entries from the Diary
which start with a *. This commit fixes this problems by making
`org-entry-properties' check for an org-mode buffer.
An agenda series can have a set of global options. Matt Lundin
reported that these options to not work completely. There reason was
that, when calling `org-finalize-agenda' for a series, the dynamic
binding of those options was already off again. This commit makes
sure that these bindings are available also during this final step.
When using "C-u C-u M-x org-remember RET" in order to jump to the last
storage location, the code failed to show the matching entry. This
commit makes sure that at least the headline of the last remember note
is made visible.
With the "* Footnotes" heading as last line in the buffer, footnote
insertion did not position new definitions correctly. This commit
fixes the problem.
Reported by Matt Lundin.
This commit adds an option to org-w3m, to decide whether the mark
should be deactivated after copying the region.
New version from author Andy Steward.
Sorting footnotes used to be almost like normalization, in that all
footnotes would be collected into a single location. Now sorting
respects the setting of `org-footnote-section'. If that is nil,
sorting will actually move each footnote into the outline node of its
first reference.
This commit add a new face for footnote labels, and activates footnote
labels for mouse clicks and for `C-c C-o', to jump to the
corresponding reference or definition.
This patch implements fully automatic creation of unique labels for
footnotes, which is also turned on as the default setting. The
automatic labels look like [fn:1], [fn:2], etc, using the first
available unused number.
The commit introduces a new variable, `org-footnote-auto-label' with a
number of different options ranging from no auto creation (prompting
the user for a label) to fully automatic creation.
Also, the commit introduces new #+STARTUP options that can be used to
select these settings on a per-file basis.
There was a bug with documents with more than one anonymous footnotes,
which would all end up to reference the first one only. The patch
fixes this problem.
Setting org-footnote-section to nil now causes definitions to be
inserted at the end of the current outline node, instead of into a
special node names "Footnotes".
A new perl program, list-hooks.pl, now extracts the full list of hook
and function variables in Org, for inclusion into Worg's org-hooks.org.
Also, add a docstring to a few hooks that did not have one.
This patch introduces more hooks for preprocessing the export buffer,
at various strategic moments. See the Changes.org file for a
description of the hooks.
Org-mode allows multiple references to the same footnote. However,
the HTML exporter cannot use the same name for all these references,
because names have to be unique. This patch appends numbers to
footnote reference names, to make sure they remain unique.
The dark side of this patch means that from the footnote definition,
there is only a single link, to the first reference of the note.
However, in a browser you can always press BACK to go back after
jumping to a footnote definition.
This patch adds support functionality for the new code references. It
makes sure that `C-c C-o' will follow a code reference correctly. It
also extends the command org-store-link to actually create a new code
reference cookie when used in a source code temporary buffer created
with "C-c '". The new link will be stored, so that it can be inserted
with `C-c C-l'. When inserting such a link, no description will be
prompted for, because these coderef links should best not have a
description part.
This patch covers the three main backends, html, latex, and ascii. It
adds the code to make sure the coderef links identified by the
preprocessing will be implemented correctly when a backend does its work.
This patch covers the much of the new line numbering and code line
referencing.
We introduce a new function with the longish name
`org-export-replace-src-segments-and-examples'. It is an extension of
the earlier `org-export-replace-src-segments'. It now also covers
EXAMPLE blocks, not only source code blocks. This was necessary to
allow line numbering also in EXAMPLE blocks.
Both clock types now accept a string with options which will be given
in the BEGIN line. Options currently recognized are -n, +n, and -r.
A bit unsatisfactory about this patch may be that LaTeX-specific code
is now defined in org-exp.el, maybe eventually we want to think of a
way to move this code back to org-export-latex.el. Really, all it
does is adding line numbers and wrapping them into a verbatim
environment.
Besides adding line numbers in a backend specific way, this patch also
adds code to search or special cookies in source code, like "((1))" or
"((name))". These are labels that can be addressed by links as
references to specific line in source code.
This patch adds a new constant with javascript functions. Each
exported HTML file will contain these definitions. Also, we add to
the default export CSS style a new class, code-highlighted, which will
be used to highlight lines in code whenever the mouse overs over a
link to this line.
The remember handler was creating a buffer with `find-file-noselect',
and then trying to find it back using `get-file-buffer'. Apparently
there are situations where this can fail, to we now use directly the
buffer returned by `find-file-noselect'.
In a recent patch we have introduced names for all fields in the last
row. This has lead to a bug, that Org thinks there might be a field
formula associated with those fields. Now we check if there really is
one, and only in this case ask to overwrite it with a column formula.
Report by Henry Atting.
The dynamic block capturing column view has an :id parameter that does
select from where the column view should be captured. The routine
searching for this entry so far only searched the current file, now it
uses the full ID API to find the entry also in another file.
Furthermore, a value "file:path/to/file.org" will capture the global
column view of that file.
Report by Francois Lagarde.
1. When LaTeX export was done with a time-stamped file, a format
error in the timestamp format caused the output file to not
have the % comment in front of the time string. As this line
is early in the file, a LaTeX error would result.
2. Replacement of some special characters could fail. Strangely
this shows up only in XEmacs, but it still is a bug.
Both bugs were reported by Hugh Daschbach.
When refiling to the current file, the completion commands do not show
the file name. This was broken because I had switched from comparing
truenames to normal names. Now I am using expanded names, this is fast
and works well.
After the failed implementation of `@0' as a reference for the last
line, this is a second attempt to provide such references. I would
have liked to allow `@last' as the reference, that would have been
beautiful. However, too many regular expressions directly search for
`@' followed by a number, so this is too hard to implement.
Therefore, I am now turning the last row into a row of implicitly
named fields. From now on, $LR1, $LR2,... can be used to refer to
fields in the last row. These names may also appear on the left hand
side of formulas.
A prefix argument to the `org-agenda-show' command is now interpreted
to make sure the entire entry is made visible in the other window, not
only the headline.
Updating agenda lines did display tags incorrectly, because it used
the list of tags available as a property to remake the list. However,
that list contains down-cased versions of the tags, because all the
filtering in the agenda does ignore case in tags.
This patch implements a fresh scan for the tags each time a line is
updated, and in this way fixes the problem. It also reverses a
previous attempt to fix a similar problem.
Text inside tables did not receive the full treatment of handling sub-
and superscripts, and of special character quoting like %, &, and {}.
This patch does fix this, but I am worried that I am overlooking the
true reason why Bastien did switch off these conversions. We'll see
if and what this will break.
Exporting tables to LaTeX suffered from the problem that Org tables
are often long, but that the tabular environment in LaTeX cannot
handle long tables. This patch fixes this issue.
LaTeX export can now deal with very long tables, by setting an option
in the "ATTR_LaTeX:" line. Also, you can specify the alignment by
hand. Here is an example:
Also, table export now correctly deals with tables that start with a
hline. In such a case, also the LaTeX version will have this extra
hline before the first line.
This patch introduces three improvements to refile target construction,
which should speed these functions up significantly.
1. A faster way to move up a level in the outline hierarchy
2. A better way to construct the outline path, in the case
that the command is scanning the entire hierarchy anyway
3. Avoid comparing the true-names of files.
The last data line in a table is often a line with important data, for
example sums of a column. In tables with varying length, the row
number of this line is constantly changing, which makes it hard to
write programs creating tables and then installing formulas.
This patch introduces @0 as a special reference to the last row, so
that @0$3 would be the field in the last row, 3rd column.
Unique identifiers for entries can now be used more efficiently.
Internally, a hash array has replaced the alist used so far to
keep track of the files in which an ID is defined. This makes it
quite fast to find an entry by ID.
There is now a new link type which looks like this:
id:GLOBALLY-UNIQUE-IDENTIFIER
This link points to a specific entry. When you move the entry to
a different file, for example if you move it to an archive
file, this link will continue to work.
The file /org-id.el/ contains an API that can be used to write
code using these identifiers, including creating IDs and finding
them wherever they are.
Org has its own method to create unique identifiers, but if the
system has /uuidgen/ command installed (Mac's and Linux systems
generally do), it will be used by default. You an also select
the method by hand, using the variable =org-id-method=.
If the ID system ever gets confused about where a certain ID is,
it initiates a global scan of all agenda files with associated
archives, all files previously known containing any IDs, and all
currently visited Org-mode files to rebuild the hash. You can
also initiate this by hand: =M-x org-id-update-id-locations=.
Running this command will also dump into the =*Messages*= buffer
information about any duplicate IDs. These should not exist, but
if you /copy/ an entry with its properties, duplicate IDs will
inevitably be produced. This is unavoidable in a plain text
system that allows you to edit the text in arbitrary ways, and a
portion of care on your side is needed to keep this system clean.
The hash is stored in the file =~/.emacs.d/.org-id-locations=.
This is also a change from previous versions where the file was
=~/.org=id-locations=. Therefore, you can remove this old file
if you have it. I am not sure what will happen if the =.emacs.d=
directory does not exists in your setup, but in modern Emacsen, I
believe it should exist. If you do not want to use IDs across
files, you can avoid the overhead with tracking IDs by
customizing the variable =org-id-track-globally=. IDs can then
still be used for links inside a single file.
IDs will also be used when you create a new link to an Org-mode
buffer. If you use =org-store-link= (normally at =C-c l=) inside
en entry in an Org-mode buffer, and ID property will be created
if it does not exist, and the stored link will be an =id:= link.
If you prefer the much less secure linking to headline text, you
can configure the variable =org-link-to-org-use-id=. The default
setting for this variable is =create-if-interactive=, meaning
that an ID will be created when you store a link interactively,
but not if you happen to be in an Org-mode file while you create
a remember note (which usually has a link to the place where you
were when starting remember).
Tables, and Hyperlinks that represent inlined images, can now be
equipped with additional information that will be used during
export. The information will be taken from the following special
lines in the buffer and apply to the first following table or
link.
- #+CAPTION: :: The caption of the image or table. This string
should be processed according to the export backend, but
this is not yet done.
- #+LABEL: :: A label to identify the figure/table for cross
references. For HTML export, this string will become the
ID for the `<div class="figure">' element that encapsulates
the image tag and the caption. For LaTeX export, this
string will be used as the argument of a `\label{...}'
macro. These lables will be available for internal links
like `[[label][Table] ]'.
- #+ATTR_HTML: :: Attributes for HTML export of image, to be
added as attributes into the `<img...>' tag. This string
will not be processed, so it should have immediately the
right format.
- #+ATTR_LaTeX: :: Attributes for LaTeX export of images, to
be inserted into the optional argument of the
`\includegraphics[...]{file}' command, to specify scaling,
clipping and other options. This string will not be
processed, so it should have immediately the right
format, like `width=5cm,angle=90'
For LaTeX export, if either a caption or a label is given, the
element will be exported as a float, i.e. wrapped into a figure
or table environment.
Xerxes Folupa writes:
> I spotted a little inconsistency in the way Org strips tags when
> processing #+begin_verse ... #+end_verse, and #+begin_quote
> ... #+end_quote blocks, compared with other literal blocks that strip
> superfluous <p> tags correctly (e.g. #+html)
[...]
> Additional question: is the space before the <br/> in verse blocks a
> design decision?
This patch fixes these issues.
Carsten Dominik
Bernt Hansen
Tassilo Horn