* org.el (org-special-properties): New special property
CLOCKSUM_T.
(org-entry-properties): Handle the new special property.
* org-colview.el (org-columns): Handle a new special property
CLOCKSUM_T.
(org-agenda-colview-summarize, org-agenda-colview-compute):
Ditto.
* org-clock.el (org-clock-sum-today): New function.
(org-clock-sum): New argument PROPNAME to set a custom text
property instead of :org-clock-minutes.
* org.texi (Special properties, Column attributes)
(Agenda column view): Document the new special property
CLOCKSUM_T.
Thanks to Brian Wood who asked a question wrt this.
* org-capture.el (org-capture-templates): New template %l to
insert the literal link pointing at the current buffer.
* org.texi (Template expansion): Document the new %l template.
Thanks to Eric Abrahamsen for this idea.
* org.texi (Fast access to TODO states): Fix documentation
about allowed characters for fast todo selection.
* org.el (org-todo-keywords): Ditto.
This fixes this wrong change here:
http://orgmode.org/w/?p=org-mode.git;a=commit;h=b6cb72
* org.el (org-speed-commands-default): New speedy command to
quickly add the :APPT_WARNTIME: property.
* org-agenda.el (org-agenda-to-appt): Use the :APPT_WARNTIME:
property to override `appt-message-warning-time' when adding
an appointment from an entry.
* org.texi (Weekly/daily agenda): Mention APPT_WARNTIME and
its use in `org-agenda-to-appt'.
This feature has been suggested, along with preliminary patches,
by Ivan Kanis. Thanks!
* org.el (org-mode-map): Bind `org-resolve-clocks' to `C-c C-x C-z'.
* org.texi (Resolving idle time): Document new keybinding.
Thanks to Joseph Thomas for suggesting this.
* org.el (org-clock-history, org-clock-adjust-closest): New
variables.
(org-timestamp-change): Maybe adjust the next or previous
clock in `org-clock-history'.
(org-shiftmetaup, org-shiftmetadown): On clock logs, update
the timestamp at point and adjust the next or previous clock
in `org-clock-history', when possible.
* org.texi (Clocking commands): Document the use of
S-M-<up/down> on clock timestamps.
Thanks to Joseph Thomas who suggested this.
* doc/org.texi (org-clock-in-last and org-clock-cancel): Update the
defkeys.
TINYCHANGE
After commit fea1b82bef the manual has not been updated, let's do it now.
* org.texi (Fast access to TODO states): Explicitely says only
letters are supported as fast TODO selection keys.
* org.el (org-todo-keywords): Ditto.
Thanks to Samuel Wales for pointing at this.
* org.el (org-link-expand-abbrev): Implement "%(my-function)"
as a new specifier. Update the docstring.
* org.texi (Link abbreviations): Illustrate the use of the
"%h" specifier. Document the new "%(my-function)" specifier.
Thanks to Takaaki ISHIKAWA who came all the way down from Tokyo
to Paris and raised a not-so-distant issue: "could we translate
emails from the mailing list and have a URI for each translated
email?" See the update in the manual for an answer.
* org.el (org-mode-map): Add `C-c C-x C-I' as a keybinding for
`org-clock-in-last'.
* org-clock.el (org-clock-continuously): New option.
(org-clock-in): Three universal prefix arguments set
`org-clock-continuously' to `t' temporarily.
(org-clock-in-last): Fix call to `org-clock-select-task' and
support continuous clocking.
(org-clock-out-time): New variable.
(org-clock-out): set `org-clock-out-time' when clocking out.
Small docstring rewriting.
(org-clock-remove-empty-clock-drawer): Fix "invalid search
bound" bug when trying to delete empty logbook drawer.
(org-clock-cancel): If the clock log is gone, send a warning
instead of deleting the region that is supposed to contain it.
* org.texi (Clocking commands): New cindex.
(Clocking commands): Update documentation for `org-clock-in'.
Document `org-clock-in-last'. Mention `org-clock-out' and
`org-clock-in-last' as commands that can be globally bound.
(Resolving idle time): Document continuous clocking.
* org.texi (Top, Introduction): Fix formatting.
(Activation): Add index entries.
(Conventions): Update section.
(Embedded @LaTeX{}): Fix formatting.
Mention that `C-c a' is assumed to be the keybinding for `org-capture'
in the whole manual. Thanks to Vagn Johansen who triggered this.
Aloha all,
The attached patch changes the link to the languages supported by babel
from a directory listing to the Worg page that uses a table to link to
the language-specific documentation pages. It was suggested by John
Hendy.
All the best,
Tom
John Hendy <jw.hendy@gmail.com> writes:
> On Tue, Jul 10, 2012 at 10:19 AM, Thomas S. Dye <tsd@tsdye.com> wrote:
>> John Hendy <jw.hendy@gmail.com> writes:
>>
>>> On Mon, Jul 9, 2012 at 7:35 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
>>>> John Hendy <jw.hendy@gmail.com> writes:
>>>>
>>>>> I have typically outputted graphics from R via tikzDevice manually,
>>>>> but gave my first whirl to just including things via the :file
>>>>> argument in my block header. In the process, I was trying to get this
>>>>> to work and found I needed to use:
>>>>>
>>>>> -----
>>>>> :results output graphics
>>>>> -----
>>>>>
>>>>> This is listed on Worg ob-R-doc:
>>>>> - http://orgmode.org/worg/org-contrib/babel/languages/ob-doc-R.html#sec-4-3
>>>>>
>>>>> But I didn't originally know about it, as it's not a listed header
>>>>> argument in the manual, which is where I check since they're all
>>>>> listed in one place:
>>>>> - http://orgmode.org/manual/results.html#results
>>>>>
>>>>> Does the manual only list universal babel header arguments and R is in
>>>>> a subset of ones using =:results output graphics= or should it be
>>>>> there?
>>>>>
>>>>
>>>> Hi John,
>>>>
>>>> The babel header arguments are implemented at two levels.
>>>>
>>>> There are general babel arguments that apply to all the supported
>>>> languages. These are described in the manual.
>>>>
>>>> It is also possible for the individual language implementations to
>>>> define their own header arguments. R is a good example, where the very
>>>> many arguments to the various R output devices are built into ob-R.el.
>>>> These language specific header arguments are not described in the
>>>> manual, but instead appear in the language specific documentation on
>>>> Worg.
>>>>
>>>> Re: your specific question about :results output graphics. I believe
>>>> this is an R specific header argument and that it is described in the
>>>> appropriate place in the documentation on Worg (see lines 68 and 230
>>>> of ob-R.el).
>>>>
>>>> The manual is not a one-stop source for answers to all Babel questions.
>>>> Recourse to the language specific documentation is typically necessary,
>>>> which is why it would be great if someone could find time to work up
>>>> documentation for the 20 or so languages that still lack it :)
>>>
>>> Thanks for the clarification and that answers the question. This was a
>>> specific header argument for R. Perhaps the manual could link to this
>>> page?
>>> - http://orgmode.org/worg/org-contrib/babel/languages.html
>>>
>>> Maybe with a diddy: "Some languages feature their own unique header
>>> arguments. The above document only universal, system wide Babel header
>>> arguments and one should consult the specific language page on Worg
>>> for additional features."
>>>
>>> Just a thought.
>>
>> Hi John,
>>
>> Thanks for this thought, which is indeed reasonable. I thought the
>> manual might lack this structure, but when I went back to the
>> manual I found that
>> http://orgmode.org/manual/Specific-header-arguments.html#Specific-header-arguments
>> has this at the bottom of the page: "Additional header arguments are
>> defined on a language-specific basis, see Languages", where "Languages"
>> is a link to another manual page, one with a table of supported
>> languages and a link to the Worg page you cite.
>>
>
> Wow. You see only what you look for. :embarrassed:
>
>> The language is a bit different than your proposal, but the path seems
>> clear enough to me.
>
> Technically the path points to
> http://orgmode.org/worg/org-contrib/babel/languages/; I'd point it to
> http://orgmode.org/worg/org-contrib/babel/languages.html as it looks
> cleaner vs. just looking at the directory of .html files. Either
> way... the manual totally does it's job and I missed it!
>
> Thanks for bearing with me!
> John
>
>>
>> Of course, there is still the issue of the languages that lack
>> language-specific documentation :)
>>
>> All the best,
>> Tom
>>
>> --
>> T.S. Dye & Colleagues, Archaeologists
>> 735 Bishop St, Suite 315, Honolulu, HI 96813
>> Tel: 808-529-0866, Fax: 808-529-0884
>> http://www.tsdye.com
>From 0438f0ae1e23321dbacd0666119205985959433e Mon Sep 17 00:00:00 2001
From: Thomas Dye <tsd@tsdye.com>
Date: Tue, 10 Jul 2012 07:12:13 -1000
Subject: [PATCH] Changed babel languages link following a suggestion by John
Hendy
The attached patch fixes a typo in the documentation.
I hope I got the format of the commit message right.
Best regards,
Jan
>From 7daa1f794794d515624ab28310db81a0e4099ea5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jan=20B=C3=B6cker?= <jan.boecker@jboecker.de>
Date: Sat, 16 Jun 2012 15:04:43 +0200
Subject: [PATCH] org.texi: fix typo
* doc/org.texi (The spreadsheet): fix typo
* org.texi (Using capture): Mention the
`org-capture-last-stored' bookmark as a way to jump to the
last stored capture.
* org-capture.el (org-capture-bookmark): New option.
(org-capture-finalize): Use it.
* org.texi The sections in the Exporting section of the manual left
out articles in the description of the org-export-as-* commands, among
other places. This patch adds them, adds a few missing prepositions,
and switches instances of "an HTML" to "a html" for internal
consistency.
TINYCHANGE
* org-agenda.el (org-agenda-persistent-marks): New option to
keep marks after a bulk action. The option defaults to nil.
(org-agenda-bulk-action): Use the new option.
* org.texi (Agenda commands): Document persistent marks.
* org-capture.el (org-capture-fill-template): Use %\n instead of %n as a
template element to be replaced with the nth prompted string.
(org-capture-templates): Update docstring.
* org.texi (Template expansion): Update doc to reflect change.
Using %n triggers errors when the template contains escaped strings,
which happens a lot with links.
* org-table.el (orgtbl-send-table): Escape special characters.
Introduce a new parameter :no-escape to prevent escaping.
* org.texi (Radio tables): Document the :no-escape parameter.
Thanks to Alexander Willand for raising this issue.
* org-archive.el (org-archive-subtree): Allow archiving to a
datetree.
* org.el (org-archive-location): Ditto.
* org.texi (Moving subtrees): Document the ability to archive
to a datetree.
TINYCHANGE
* org.texi: Alter several examples of headings with timestamps
in them to include the timestamps in the body instead of the heading.
* orgguide.texi: Alter the same examples in the same way as for
org.texi.
The Org-mode manual explicitly discourages the inclusion of timestamps
in headlines, yet examples do just that. These changes make the manual
consistent with its own advice.
TINYCHANGE
* org.el (org-latex-create-formula-image-program): New option
to use either dvipng or imagemagick to convert and preview
LaTeX fragments.
(org-preview-latex-fragment, org-format-latex): Handle the new
option.
(org-create-formula-image-with-dvipng): Rename from
`org-create-formula-image'.
(org-create-formula-image-with-imagemagick): New defun to
handle LaTeX preview with imagemagick.
(org-latex-color, org-latex-color-format): New defuns to
handle color conversions.
* org-latex.el (org-latex-to-pdf-process, org-export-as-pdf):
Allow to use imagemagick to convert LaTeX fragments.
* org-html.el (org-export-html-preprocess): Ditto.
* org-exp.el (org-export-with-LaTeX-fragments): Ditto.
* org.texi (@LaTeX{} fragments): Document imagemagick as an
alternative to dvipng.
* org.el (org-repeat-re)
(org-clone-subtree-with-time-shift, org-auto-repeat-maybe)
(org-deadline, org-schedule, org-matcher-time)
(org-time-stamp, org-read-date, org-read-date-get-relative)
(org-display-custom-time, org-get-wdays)
(org-time-string-to-absolute, org-closest-date)
(org-timestamp-change): Allow to set hourly repeat cookie.
Send an error when an hourly repeat cookie is set and no hour
is specified in the timestamp.
* org.texi (Repeated tasks): Document repeat cookies for
years, months, weeks, days and hours.
* org-agenda.el (org-agenda-get-timestamps): Match hourly
repeat cookies.
* org-icalendar.el (org-print-icalendar-entries): Handle
hourly repeat cookies.
Thanks a lot to Takafumi Arakaki for this idea and for a preliminary
version of this patch.
* doc/Makefile: rename auto-generated file "git-describe.texi" to
"org-version.inc" to allow for easier inclusion into Emacs.
* doc/org.texi: include "org-version.inc" instead of
"git-describe.texi".
* lisp/Makefile: new auto-generated file org-version.el with autoload
cookies. The version strings will be pulled during autoload
extraction into org-install.el (standalone org-mode) or
../loaddefs.el (Emacs).
* doc/Makefile: introduce target for git-describe.texi, which is an
automatically generated file that records the output of git-describe
and date; remove this file during make clean
* doc/org.texi: remove @set for VERSION and DATE and do an @include
git-describe.texi instead
doc/org.texi: Fix two typos in Agenda commands
* doc/org.texi (Agenda commands): Fix typos by swapping
the equivalent keybindings to `org-agenda-next-line'
with the ones to `org-agenda-previous-line'.
TINYCHANGE
* org-html.el (org-export-html-preamble-format)
(org-export-html-postamble-format): Improve the docstring.
* org.texi (HTML preamble and postamble): Small doc improvement.
Thanks to Zachary Jones who asked for this.
* doc/org.texi (Literal examples in ODT export):
htmlfontify.el in Emacs-24.1 now supports fontification. So
ODT source blocks will be fontified by default.
(Evaluating code blocks, Evaluating code blocks):
Whitespace-only change.
I started from the 78ec8e commit then cherry-picked and squashed
commits that have been done in master since then, except the bad
commits that overwrote the tree (in master) with the tree in maint.
This commit also bumps the version number to 7.8.06.
The only "fix" that was made between 78ec8e and the previous commit
is e0072f which has been reported to break stuff.
doc/org.texi (section on Special Properties) Clarified that ITEM refers
to the headline of the entry not the whole entry text.
(section on Matching Tags and Properties) Clarified that matching on
the value of ITEM special property is not currently supported,
and added a footnote about a partial workaround.
Also added missing -if suffix to references to org-agenda-skip-entry-if.
TINYCHANGE
This fixes a wrong merge that should not have happened:
commit 7e903a merges the master branch into the maint branch,
while we really want to keep the maint branch a bugfix-only
branch.
This commit reverts back the maint branch to its state before
merging the master branch. From there, we will fix remaining
problems with the maint branch (e.g. copyright issues) then
release this maint branch as Org-mode 7.8.05.
* lisp/org-agenda.el (org-agenda-local-vars): Clean up the variable list.
(org-agenda-get-restriction-and-command): Add a key for toggling
sticky agenda views.
* doc/org.texi (Agenda dispatcher): Document sticky agenda views
and the new key for them.
2012-01-17 Jambunathan K <kjambunathan@gmail.com>
* etc/styles/OrgOdtContentTemplate.xml
(OrgIndentedSection-Level-*): New section styles. These
sections are indented to the same level as the corresponding
list entries. These sections hold tables that occur within a
list.
(OrgTable): Increased relative width from 90% to 96% for
aesthetic reasons.
* lisp/org-odt.el (org-odt-table-indentedp): New variable
(org-odt-begin-table): Modified. If the table is within a
list, temporarily leave the list and begin an indented section
before emitting the table.
(org-odt-end-table): Modified. If the table was within a
list, close the indented section and re-open the list
immediately after ending the table.
(org-odt-continue-list, org-odt-discontinue-list): Helper
routines to temporarily discontinue and continue a list.
(org-odt-list-stack-stashed): New variable to hold the state
of a pending list.
(org-odt-begin-list, org-odt-begin-list-item)
(org-odt-end-list-item): Modified. Handle nitty-gritties for
continuing a list and list item.
(org-odt-section-count): New variable that keeps track of
section count. Used in conjunction with naming of sections.
(org-odt-begin-section, org-odt-end-section): New defuns.
(org-odt-init-outfile): Initialize
`org-odt-list-stack-stashed' and `org-odt-section-count'.
* lisp/org-lparse.el (org-lparse-list-item-count): Removed. Was a
superfluous variable.
(org-lparse-list-level): Removed. Now derived from
`org-lparse-list-stack'.
(org-lparse-list-stack): New. List that records the list
types - ordered, unordered or descriptive - in the following
order: self, parent, grand-parent etc.
(org-do-lparse): Added, removed above let-bound vars.
Disallowed regular tables within list-table block.
(org-lparse-begin-list, org-lparse-end-list)
(org-lparse-begin-list-item, org-lparse-end-list-item):
Propagate above changes.
OpenDocument doesn't permit tables to occur in the middle of a
list. Use list continuations and indented sections to typeset
indented tables.
Fixes the following bug:
http://lists.gnu.org/archive/html/emacs-orgmode/2012-01/msg00515.html
Add support for indented tables in ODT export
2012-01-20 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-format-textbox): Honor user-specified
width in captioned images.
Fix for bug reported here:
http://lists.gnu.org/archive/html/emacs-orgmode/2012-01/msg00641.html
Honor user-specified width in captioned images
2012-01-23 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-table-style-format): New. Template for
auto-generated table styles.
(org-odt-automatic-styles, org-odt-object-counters): New
variables.
(org-odt-add-automatic-style): New function.
(org-odt-write-automatic-styles): New function. Create
automatic styles for tables that have custom :rel-width.
(org-odt-begin-table): Parse attributes specified with
"#+ATTR_ODT: " option and use it to create an automatic table
style.
(org-odt-save-as-outfile): Call
`org-odt-add-write-automatic-styles'.
(org-odt-init-outfile): Init newly add variables.
(org-odt-section-count): Remove it.
(org-odt-begin-section): Use `org-odt-add-automatic-style' to
generate an automatic section name.
Customize table width using :rel-width option. For example,
to create a table of width 60% use:
#+attr_odt: :rel-width 60
| A | B |
|---+---|
| | |
org-odt.el: Put table width under user-control
2012-01-23 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-label-styles): Add a new style.
(org-odt-category-map-alist): Use it.
Andreas Leha writes:
The following snippet exports correctly to LaTeX and to html, but
produces the text "Figure Figure" in odt.
Could the behaviour be synchronized?
=== example.org ==========================
* Test ref
plot(1:10, 1:10)
Here is a reference to Figure \ref{fig:bar}
=== example.org ==========================
org-odt.el: Make label references consistent with LaTeX export
2012-01-24 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-entity-frame-styles): Add frame params
for images that are anchored as character.
(org-export-odt-format-image): Handle new anchor type
"as-char".
(org-export-odt-default-image-sizes-alist): Misc. change.
(org-export-odt-format-formula): Misc. change.
With this change, one can use the below snippet to produce
images that are laid out side-by-side.
#+ATTR_ODT: :width 7 :height 7 :anchor as-char
#+header: :file foo.png
[[./foo.png]]
#+caption: bar
#+ATTR_ODT: :width 7 :height 7 :anchor as-char
#+header: :file bar.png
[[./bar.png]]
See http://lists.gnu.org/archive/html/emacs-orgmode/2012-01/msg00677.html.
org-odt.el: Allow images to be anchored as characters
2012-01-24 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-export-odt-format-formula): Use :style
property to specify custom table styles.
Continuation of the earlier commit titled: "Put table width
under user-control".
org-odt.el: Fix regression in typesetting of MathML formulae
2012-01-27 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-format-preamble): Don't insert TOC here.
Delay it till the end of export.
(org-odt-begin-document-body): Make a note of the default
position of TOC in `org-lparse-dyn-first-heading-pos'.
(org-odt-insert-toc): Insert TOC as directed by
[TABLE-OF-CONTENTS] line or at the default position.
(org-odt-end-export): Call `org-odt-insert-toc'.
Fix for the following bug:
http://lists.gnu.org/archive/html/emacs-orgmode/2012-01/msg00974.html
org-odt.el: Honor "[TABLE-OF-CONTENTS]" directive
2012-01-27 Jambunathan K <kjambunathan@gmail.com>
org-odt.el: Fix earlier commit
2012-01-30 Jambunathan K <kjambunathan@gmail.com>
* OrgOdtStyles.xml (OrgTitlePage): New page style. Include no
footer. Use "OrgFrontMatterPage" for the following page.
(OrgFrontMatterPage): New page style. Include a footer that
displays page numbers in Roman style. Use mirrored pages.
Use "OrgFrontMatterPage" for the following page.
(OrgPage): New page style. Include a footer that displays
page numbers. Use mirrored pages. Use "OrgPage" for the
following page.
(OrgFirstPage): New page style. Include a footer that
displays page numbers. Right page only. Use "OrgPage" for
the following page.
(Standard): Modify to include a footer that displays page
numbers. Use mirrored pages. Use "Standard" for the
following page.
None of the above page styles have a header.
The newly added page styles are not used as yet.
org-odt.el: By default, include page numbers in the page footer
2012-01-31 Jambunathan K <kjambunathan@gmail.com>
org-odt.el: Do `clear-image-cache' before `create-image'
2012-02-03 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-lparse.el (org-lparse-do-convert): Replace
`call-process' with `shell-command-to-string'.
* lisp/org-odt.el (org-export-odt-convert-processes): Add a new
converter which depends solely on LibreOffice and nothing
else.
(org-export-odt-convert-process): Make the above native
converter the default.
Thanks to Giles for introducing the "--convert-to" option of
soffice.exe. The option seems to be a fairly recent
development.
http://imperfectsoftware.blogspot.in/2012/01/one-of-my-less-enjoyable-tasks-is-to.html
With this change, one can export to pdf via odt by a simple
(setq org-export-odt-preferred-output-format "pdf")
There is no need to install additional converters.
org-odt.el: Make LibreOffice the default converter
2012-02-09 Jambunathan K <kjambunathan@gmail.com>
* org-odt.el (org-export-odt-convert-capabilities): Change the
default value.
See http://lists.gnu.org/archive/html/emacs-orgmode/2012-02/msg00293.html.
Offer "docx" as an option in `org-export-odt-preferred-output-format'
2012-02-12 Jambunathan K <kjambunathan@gmail.com>
org-odt.el: Fix indentation
2012-02-12 Jambunathan K <kjambunathan@gmail.com>
org-odt.el: Tag all custom variables with Emacs version
2012-02-12 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-export-odt-convert-processes): Re-define
(org-export-odt-convert-capabilities): Fix an accidental
regression.
* lisp/org-lparse.el (org-lparse-do-convert): Related change.
Simplify definition of `org-export-odt-convert-processes'
2012-02-12 Jambunathan K <kjambunathan@gmail.com>
Retire support for BasicODConverter
2012-02-14 Jambunathan K <kjambunathan@gmail.com>
* org-odt.el (org-export-as-odt-to-buffer)
(org-replace-region-by-odt, org-export-region-as-odt): Remove
these interactive functions. They are of questionable value.
org-odt.el: Remove interactive functions of questionable value
2012-02-15 Jambunathan K <kjambunathan@gmail.com>
Improve converting from ODT to other formats
2012-02-15 Jambunathan K <kjambunathan@gmail.com>
* org-odt.el (org-export-odt-image-size-probe-method)
(org-odt-do-image-size): Use imagemagick preferentially to
determine image sizes.
See http://lists.gnu.org/archive/html/emacs-orgmode/2012-02/msg00288.html
org-odt.el: Use imagemagick to determine image sizes
2012-02-16 Jambunathan K <kjambunathan@gmail.com>
* org.texi (Top, OpenDocument Text export)
(ODT export commands, Extending ODT export)
(Images in ODT export, Tables in ODT export)
(Configuring a document converter): Add or Update.
org.texi: Update ODT section
* doc/org.texi: Decapitalize file name in references to Calc manual.
On a case sensitive file system the references from the HTML Org
manual (e. g. the link href="Calc.html#Embedded-Mode" or
href="../Calc/Embedded-Mode.html#Embedded-Mode") to the HTML Calc
manual (e. g. the file calc.html or calc/Embedded-Mode.html) do not
match.
* doc/org.texi (MobileOrg): Change the wording to reflect that the
Android Version is no longer just the little brother of the iOS version.
* doc/orgguide.texi (MobileOrg): Change the wording to reflect that the
Android Version is no longer just the little brother of the iOS version.
* org.el (org-set-regexps-and-options): Set the value of
`org-drawers' by adding the value of the infile #+DRAWERS
option to that of the existing `org-drawers'.
* org.texi (Drawers): Clearly states that #+DRAWERS will add
drawers to the one originally listed in `org-drawers'.
* org.el (org-insert-property-drawer): Not an interactive
command anymore.
(org-insert-drawer): With a prefix argument, insert a property
drawer. Check for headline within the region before inserting
the drawer. Don't include special drawers in the completion
table.
(org-mode-map): New keybinding `C-c C-x d' for
`org-insert-drawer'.
* org.texi (Drawers): How to insert/complete drawers.
Thanks to Nicolas Goaziou for the discussion and the patch.
* doc/org.texi (noweb-sep): Document new header argument.
* lisp/ob.el (org-babel-common-header-args-w-values): Add new header
argument.
(org-babel-expand-noweb-references): Use header argument rather than
customization variable.
* lisp/ob.el (org-babel-noweb-separator): Custom variable for
accumulated noweb references.
(org-babel-expand-noweb-references): Allow separator for noweb
references.
* doc/org.texi (noweb-ref): Documentation of this new custom variable.
Using lowercase for environment keywords is not as readable
as using uppercase. Using lowercase just for #+results looks
weird -- instead, we use uppercase for *all* environment and
option keywords, explicitely explaining that the user can use
either lowercase or uppercase in their file.
Also explain this convention.
Two exceptions: #+results, as it is dynamically inserted and
has always been lowercase, and #+BEGIN_LaTeX, with mixed case
to respect Lamport's will. But all these keywords can be
written with lower/upper/mixed case.
Thanks to François Pinard for raising this issue.
* org-agenda.el (org-agenda-filter-preset): New alias.
(org-agenda-filter-by-category): New command.
(org-agenda-mode-map): Add the new command.
(org-agenda-custom-commands-local-options): Add category
filter preset.
(org-agenda-mark-filtered-text): Mark both tag and filter
overlays.
(org-agenda-category-filter-preset): New variable.
(org-finalize-agenda, org-agenda-redo)
(org-agenda-filter-make-matcher, org-agenda-filter-apply):
Handle both category and tag filters.
(org-agenda-filter-show-all-tag): Rename from
`org-agenda-filter-by-tag-show-all'.
(org-agenda-filter-show-all-cat): New function.
(org-agenda-set-mode-name): Show the category filter in the
modeline.
* org-faces.el (org-agenda-filter-category): New face.
* org.texi (Agenda commands): Update documentation about the
new category filtering feature.
This feature has been requested by several people -- thanks
to all of them for mentioning this possibility.
* org-exp.el (org-export-date-timestamp-format): New option to
define the way a timestamp in #+DATE will be exported.
(org-infile-export-plist): Use the new option.
Thanks to Torsten Wagner for this idea.
* org.texi (Plain lists): Split the table to fix the display
of items.
Thanks to Elias Assarsson for spotting this, and to Takaaki
ISHIKAWA for providing a preliminary patch.
* doc/org.texi: Use 'Org mode' instead of alternatives like
'Org-mode' or 'org-mode', as suggested in Phil's notes
('doc/Documentation_Standards.org').
Org manual: Fix double-spaces at the end of sentences
* doc/org.texi: End sentences with two spaces.
>From 19e39b67f4a8dbee3f1015f636fac4f77e59d3c2 Mon Sep 17 00:00:00 2001
From: Julian Gehring <julian.gehring@googlemail.com>
Date: Mon, 12 Dec 2011 19:19:20 +0100
Subject: [PATCH] Org manual: Fix double-spaces at the end of sentences
* doc/org.texi: End sentences with two spaces.
Hi Bastien and others,
Lately I have been seeing a lot of bug reports sent using the
org-submit-bug-report. The reporter usually reports the bug from a
session they have been using with their full blown customisations. And
often they are requested to reproduce the bug with emacs -Q. So I
thought it would be easier if the manual mentioned this little detail.
A patch is attached.
Hope this helps.
PS: I marked the patch as TINY CHANGE.
* doc/org.texi (External links): Document the link types file+sys and
file+emacs, slightly narrow used page width.
* lisp/org.el (org-offer-links-in-entry): Make list when assigning a
single link.
"M-1 C-c C-o" or (org-open-at-point 1) or (org-offer-links-in-entry 1)
on a headline followed by two links enters Lisp error. Both changes
are remainders of the commit release_6.33f-189-g3e0c61d.
* doc/org.texi (eval): Documenting the full range of :eval header
argument values.
* lisp/ob.el (org-babel-confirm-evaluate): Adding support for new
range of :eval header arguments.
* testing/lisp/test-ob.el (test-ob/eval-header-argument): Testing the
:eval header argument.
* doc/org.texi (eval): Documentation of the new :eval option.
* lisp/ob.el (org-babel-confirm-evaluate): Inhibit evaluation during
export when eval is set to "non-export".